linux-kernel - [PATCH net v3 5/5] net: phy: vitesse: repair vsc73xx autonegotiation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240809193807.2221897-6-paweldembicki@gmail.com>
Date: Fri,  9 Aug 2024 21:38:06 +0200
From: Pawel Dembicki <paweldembicki@...il.com>
To: netdev@...r.kernel.org
Cc: Pawel Dembicki <paweldembicki@...il.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	linux-kernel@...r.kernel.org
Subject: [PATCH net v3 5/5] net: phy: vitesse: repair vsc73xx autonegotiation

When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.

Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@...il.com>
---
v3:
  - removed MDI-X with disabled autoneg feature (it will goes to
    net-next in future)
v2:
  - resend only

This patch came from net-next series[0].
Changes since net-next:
  - rebased to netdev/main only

[0] https://patchwork.kernel.org/project/netdevbpf/patch/20240729210615.279952-6-paweldembicki@gmail.com/
---
 drivers/net/phy/vitesse.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 897b979ec03c..3b5fcaf0dd36 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -237,16 +237,6 @@ static int vsc739x_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int vsc73xx_config_aneg(struct phy_device *phydev)
-{
-	/* The VSC73xx switches does not like to be instructed to
-	 * do autonegotiation in any way, it prefers that you just go
-	 * with the power-on/reset defaults. Writing some registers will
-	 * just make autonegotiation permanently fail.
-	 */
-	return 0;
-}
-
 /* This adds a skew for both TX and RX clocks, so the skew should only be
  * applied to "rgmii-id" interfaces. It may not work as expected
  * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces.
@@ -444,7 +434,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc738x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -453,7 +442,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc738x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -462,7 +450,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc739x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -471,7 +458,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc739x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
-- 
2.34.1