[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240812223611.GA2346223-robh@kernel.org>
Date: Mon, 12 Aug 2024 16:36:11 -0600
From: Rob Herring <robh@...nel.org>
To: Frank Li <Frank.Li@....com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <f.fainelli@...il.com>,
"open list:ETHERNET PHY LIBRARY" <netdev@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>, imx@...ts.linux.dev
Subject: Re: [PATCH 1/1] dt-bindings: net: mdio: Add negative patten match
for child node
On Sun, Aug 11, 2024 at 11:11:14PM -0400, Frank Li wrote:
> mdio.yaml wrong parser mdio controller's address instead phy's address when
> mdio-mux exist.
>
> For example:
> mdio-mux-emi1@54 {
> compatible = "mdio-mux-mmioreg", "mdio-mux";
>
> mdio@20 {
> reg = <0x20>;
> ^^^ This is mdio controller register
>
> ethernet-phy@2 {
> reg = <0x2>;
> ^^^ This phy's address
> };
> };
> };
>
> Only phy's address is limited to 31 because MDIO bus defination.
>
> But CHECK_DTBS report below warning:
>
> arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: mdio-mux-emi1@54:
> mdio@20:reg:0:0: 32 is greater than the maximum of 31
>
> The reason is that "mdio@20" match "patternProperties: '@[0-9a-f]+$'" in
> mdio.yaml.
>
> Change to '^(?!mdio@).*@[0-9a-f]+$' to avoid match parent's mdio
> controller's address.
>
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
> Documentation/devicetree/bindings/net/mdio.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
> index a266ade918ca7..a7def3eb4674d 100644
> --- a/Documentation/devicetree/bindings/net/mdio.yaml
> +++ b/Documentation/devicetree/bindings/net/mdio.yaml
> @@ -59,7 +59,7 @@ properties:
> type: boolean
>
> patternProperties:
> - '@[0-9a-f]+$':
> + '^(?!mdio@).*@[0-9a-f]+$':
This is at the wrong spot. The problem is up a level where the $nodename
matched mdio-mux-emi1@54.
I think what we want for the $nodename pattern is:
'^mdio(-(bus|external))?(@.+|-([0-9]+))$'
There's lots of pinctrl nodes named 'mdio...' we need to avoid and we
aren't currently.
I'd prefer not to support 'mdio-external', but there's already 1
documented case. I think the only node name fix we'd need with this is
'mdio-gpio' which should be just 'mdio' or 'mdio-N' like all other
bitbanged implementations.
Rob
Powered by blists - more mailing lists