[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3b7b629e-0085-4821-932c-e89faad15c1a@gmail.com>
Date: Mon, 12 Aug 2024 17:10:56 +0800
From: Hui-Ping Chen <hpchen0nvt@...il.com>
To: Krzysztof Kozlowski <krzk@...nel.org>, miquel.raynal@...tlin.com,
richard@....at, vigneshr@...com, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, sumit.semwal@...aro.org, christian.koenig@....com,
esben@...nix.com
Cc: linux-arm-kernel@...ts.infradead.org, linux-mtd@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linaro-mm-sig@...ts.linaro.org
Subject: Re: [PATCH 2/2] mtd: rawnand: nuvoton: add new driver for the Nuvoton
MA35 SoC
Dear Krzysztof,
Thank you for your reply.
On 2024/8/12 下午 02:30, Krzysztof Kozlowski wrote:
> On 12/08/2024 05:00, Hui-Ping Chen wrote:
>> Nuvoton MA35 SoCs NAND Flash Interface Controller
>> supports 2KB, 4KB and 8KB page size, and up to 8-bit,
>> 12-bit, and 24-bit hardware ECC calculation circuit
>> to protect data communication.
>>
>> Signed-off-by: Hui-Ping Chen <hpchen0nvt@...il.com>
>> ---
>> drivers/mtd/nand/raw/Kconfig | 8 +
>> drivers/mtd/nand/raw/Makefile | 1 +
>> drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c | 1109 ++++++++++++++++++++
>> 3 files changed, 1118 insertions(+)
>> create mode 100644 drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
>>
>> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
>> index 614257308516..932bf2215470 100644
>> --- a/drivers/mtd/nand/raw/Kconfig
>> +++ b/drivers/mtd/nand/raw/Kconfig
>> @@ -448,6 +448,14 @@ config MTD_NAND_RENESAS
>> Enables support for the NAND controller found on Renesas R-Car
>> Gen3 and RZ/N1 SoC families.
>>
>> +config MTD_NAND_NVT_MA35
>> + tristate "Nuvoton MA35 SoC NAND controller"
>> + depends on ARCH_MA35 || COMPILE_TEST
>> + depends on OF
>> + help
>> + Enables support for the NAND controller found on
>> + the Nuvoton MA35 series SoCs.
>> +
>> comment "Misc"
>>
>> config MTD_SM_COMMON
>> diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
>> index 25120a4afada..cdfdfee3f5f3 100644
>> --- a/drivers/mtd/nand/raw/Makefile
>> +++ b/drivers/mtd/nand/raw/Makefile
>> @@ -57,6 +57,7 @@ obj-$(CONFIG_MTD_NAND_INTEL_LGM) += intel-nand-controller.o
>> obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rockchip-nand-controller.o
>> obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o
>> obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o
>> +obj-$(CONFIG_MTD_NAND_NVT_MA35) += nuvoton_ma35d1_nand.o
>>
>> nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
>> nand-objs += nand_onfi.o
>> diff --git a/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c b/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
>> new file mode 100644
>> index 000000000000..7445eb489c38
>> --- /dev/null
>> +++ b/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
>> @@ -0,0 +1,1109 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2024 Nuvoton Technology Corp.
>> + */
>> +#include <linux/slab.h>
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <linux/of.h>
>> +
>> +#include <linux/mtd/mtd.h>
>> +#include <linux/mtd/partitions.h>
>> +#include <linux/mtd/rawnand.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/dmaengine.h>
>> +
>> +/* NFI DMA Registers */
>> +#define MA35_NFI_REG_BUFFER0 (0x000)
>> +#define MA35_NFI_REG_DMACTL (0x400)
>> +#define DMA_EN BIT(0)
>> +#define DMA_RST BIT(1)
>> +#define DMA_BUSY BIT(9)
>> +
>> +#define MA35_NFI_REG_DMASA (0x408)
>> +#define MA35_NFI_REG_DMABCNT (0x40C)
>> +#define MA35_NFI_REG_DMAINTEN (0x410)
>> +#define MA35_NFI_REG_DMAINTSTS (0x414)
>> +
>> +/* NFI Global Registers */
>> +#define MA35_NFI_REG_GCTL (0x800)
>> +#define NAND_EN BIT(3)
>> +#define MA35_NFI_REG_GINTEN (0x804)
>> +#define MA35_NFI_REG_GINTSTS (0x808)
>> +
>> +/* NAND-type Flash Registers */
>> +#define MA35_NFI_REG_NANDCTL (0x8A0)
>> +#define SWRST BIT(0)
>> +#define DMA_W_EN BIT(1)
>> +#define DMA_R_EN BIT(2)
>> +#define ECC_CHK BIT(7)
>> +#define PROT3BEN BIT(8)
>> +#define PSIZE_2K (1 << 16)
>> +#define PSIZE_4K (2 << 16)
>> +#define PSIZE_8K (3 << 16)
>> +#define PSIZE_MASK (3 << 16)
>> +#define BCH_T24 BIT(18)
>> +#define BCH_T8 BIT(20)
>> +#define BCH_T12 BIT(21)
>> +#define BCH_MASK (0x1f << 18)
>> +#define ECC_EN BIT(23)
>> +#define DISABLE_CS0 BIT(25)
>> +
>> +#define MA35_NFI_REG_NANDTMCTL (0x8A4)
>> +#define MA35_NFI_REG_NANDINTEN (0x8A8)
>> +#define MA35_NFI_REG_NANDINTSTS (0x8AC)
>> +#define INT_DMA BIT(0)
>> +#define INT_ECC BIT(2)
>> +#define INT_RB0 BIT(10)
>> +#define INT_RB0_STS BIT(18)
>> +
>> +#define MA35_NFI_REG_NANDCMD (0x8B0)
>> +#define MA35_NFI_REG_NANDADDR (0x8B4)
>> +#define ENDADDR BIT(31)
>> +
>> +#define MA35_NFI_REG_NANDDATA (0x8B8)
>> +#define MA35_NFI_REG_NANDRACTL (0x8BC)
>> +#define MA35_NFI_REG_NANDECTL (0x8C0)
>> +#define ENABLE_WP (0x0)
>> +#define DISABLE_WP BIT(0)
>> +
>> +#define MA35_NFI_REG_NANDECCES0 (0x8D0)
>> +#define ECC_STATUS_MASK (0x3)
>> +#define ECC_ERR_CNT_MASK (0x1f)
>> +
>> +#define MA35_NFI_REG_NANDECCES1 (0x8D4)
>> +#define MA35_NFI_REG_NANDECCES2 (0x8D8)
>> +#define MA35_NFI_REG_NANDECCES3 (0x8DC)
>> +
>> +/* NAND-type Flash BCH Error Address Registers */
>> +#define MA35_NFI_REG_NANDECCEA0 (0x900)
>> +#define MA35_NFI_REG_NANDECCEA1 (0x904)
>> +#define MA35_NFI_REG_NANDECCEA2 (0x908)
>> +#define MA35_NFI_REG_NANDECCEA3 (0x90C)
>> +#define MA35_NFI_REG_NANDECCEA4 (0x910)
>> +#define MA35_NFI_REG_NANDECCEA5 (0x914)
>> +#define MA35_NFI_REG_NANDECCEA6 (0x918)
>> +#define MA35_NFI_REG_NANDECCEA7 (0x91C)
>> +#define MA35_NFI_REG_NANDECCEA8 (0x920)
>> +#define MA35_NFI_REG_NANDECCEA9 (0x924)
>> +#define MA35_NFI_REG_NANDECCEA10 (0x928)
>> +#define MA35_NFI_REG_NANDECCEA11 (0x92C)
>> +
>> +/* NAND-type Flash BCH Error Data Registers */
>> +#define MA35_NFI_REG_NANDECCED0 (0x960)
>> +#define MA35_NFI_REG_NANDECCED1 (0x964)
>> +#define MA35_NFI_REG_NANDECCED2 (0x968)
>> +#define MA35_NFI_REG_NANDECCED3 (0x96C)
>> +#define MA35_NFI_REG_NANDECCED4 (0x970)
>> +#define MA35_NFI_REG_NANDECCED5 (0x974)
>> +
>> +/* NAND-type Flash Redundant Area Registers */
>> +#define MA35_NFI_REG_NANDRA0 (0xA00)
>> +#define MA35_NFI_REG_NANDRA1 (0xA04)
>> +
>> +#define SKIP_SPARE_BYTES 4
>> +
>> +/* BCH algorithm related constants and variables */
>> +enum {
>> + eBCH_NONE = 0,
>> + eBCH_T8,
>> + eBCH_T12,
>> + eBCH_T24,
>> + eBCH_CNT
>> +} E_BCHALGORITHM;
>> +
>> +static const int g_i32BCHAlgoIdx[eBCH_CNT] = {BCH_T8, BCH_T8, BCH_T12, BCH_T24};
>> +static struct nand_ecclayout_user ma35_nand_oob;
> Why this is file-scope?
I will remove the `static`.
>> +static const int g_i32ParityNum[3][eBCH_CNT] = {
>
> This is not a Linux coding style. Do not send Windows or some other
> platform-independent patches to review.
>
This is my mistake. I should have modified it instead of copying it
directly.
I will fix it.
>> + {0, 60, 92, 90}, /* for 2K */
>> + {0, 120, 184, 180}, /* for 4K */
>> + {0, 240, 368, 360}, /* for 8K */
>> +};
>> +
>> +
>> +struct ma35_nand_info {
>> + struct nand_controller controller;
>> + struct device *dev;
>> + void __iomem *regs;
>> + int irq;
>> + struct clk *clk;
>> + struct completion complete;
>> +
>> + struct mtd_info mtd;
>> + struct nand_chip chip;
>> + struct mtd_partition *parts;
>> + int nr_parts;
>> +
>> + int eBCHAlgo;
> No, use Linux coding style.
I will fix it.
>> + u8 *dma_buf;
>> + spinlock_t dma_lock;
>> + dma_addr_t dma_addr;
>> +};
>> +
>> +static int ma35_ooblayout_ecc(struct mtd_info *mtd, int section,
>> + struct mtd_oob_region *oobregion)
>> +{
>> + struct nand_chip *chip = mtd_to_nand(mtd);
>> + struct nand_ecc_ctrl *ecc = &chip->ecc;
>> +
>> + if (section || !ecc->total)
>> + return -ERANGE;
>> +
>> + oobregion->length = ecc->total;
>> + oobregion->offset = mtd->oobsize - oobregion->length;
>> +
>> + return 0;
>> +}
> ... this code looks poor, really poor.
I will rewrite this function.
>> +}
>> +
>> +static int ma35_nfi_correct(struct nand_chip *chip, unsigned long addr)
>> +{
>> + struct ma35_nand_info *nand = nand_get_controller_data(chip);
>> + struct mtd_info *mtd = nand_to_mtd(chip);
>> + int uStatus, i, j, i32FieldNum = 0;
>> + int uReportErrCnt = 0;
>> + int uErrorCnt = 0;
>> +
> More of weird coding style. Use Linux coding style. Patch is for Linux.
I will fix it.
>> + if ((readl(nand->regs + MA35_NFI_REG_NANDCTL) & BCH_MASK) == BCH_T24)
>> + i32FieldNum = mtd->writesize / 1024;
>> + else
>> + i32FieldNum = mtd->writesize / 512;
>
> ...
I will fix it.
>> +static int ma35_nand_probe(struct platform_device *pdev)
>> +{
>> + struct ma35_nand_info *nand;
>> + struct nand_chip *chip;
>> + struct mtd_info *mtd;
>> + int retval = 0;
>> +
>> + nand = devm_kzalloc(&pdev->dev, sizeof(struct ma35_nand_info), GFP_KERNEL);
> sizeof(*)
I will fix it.
>> + if (!nand)
>> + return -ENOMEM;
>> +
>> + nand_controller_init(&nand->controller);
>> +
>> + nand->regs = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(nand->regs))
>> + return PTR_ERR(nand->regs);
>> +
>> + nand->dev = &pdev->dev;
>> + chip = &nand->chip;
>> + mtd = nand_to_mtd(chip);
>> + nand_set_controller_data(chip, nand);
>> + nand_set_flash_node(chip, pdev->dev.of_node);
>> +
>> + mtd->priv = chip;
>> + mtd->owner = THIS_MODULE;
>> + mtd->dev.parent = &pdev->dev;
>> +
>> + nand->clk = of_clk_get(pdev->dev.of_node, 0);
> No, no. That's not how you get a clock. Use devm_clk_get().
I will fix it.
>> + if (IS_ERR(nand->clk))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(nand->clk),
>> + "failed to find nand clock\n");
>> +
>> + retval = clk_prepare_enable(nand->clk);
>> + if (retval < 0) {
>> + dev_err(&pdev->dev, "Failed to enable clock\n");
>> + return -ENXIO;
>> + }
>> +
>> + nand->chip.controller = &nand->controller;
>> +
>> + chip->legacy.cmdfunc = ma35_nand_command;
>> + chip->legacy.waitfunc = ma35_waitfunc;
>> + chip->legacy.read_byte = ma35_nand_read_byte;
>> + chip->legacy.select_chip = ma35_nand_select_chip;
>> + chip->legacy.read_buf = ma35_read_buf_dma;
>> + chip->legacy.write_buf = ma35_write_buf_dma;
>> + chip->legacy.dev_ready = ma35_nand_devready;
>> + chip->legacy.chip_delay = 25; /* us */
>> +
>> + /* Read OOB data first, then HW read page */
>> + chip->ecc.hwctl = ma35_nand_enable_hwecc;
>> + chip->ecc.calculate = ma35_nand_calculate_ecc;
>> + chip->ecc.correct = ma35_nand_correct_data;
>> + chip->ecc.write_page = ma35_nand_write_page_hwecc;
>> + chip->ecc.read_page = ma35_nand_read_page_hwecc_oob_first;
>> + chip->ecc.read_oob = ma35_nand_read_oob_hwecc;
>> + chip->options |= (NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA);
>> +
>> + ma35_nand_initialize(nand);
>> + platform_set_drvdata(pdev, nand);
>> +
>> + nand->controller.ops = &ma35_nand_controller_ops;
>> +
>> + nand->irq = platform_get_irq(pdev, 0);
>> + if (nand->irq < 0) {
>> + dev_err(&pdev->dev, "failed to get platform irq\n");
> Syntax is return dev_err_probe
I will fix it.
>> + return -EINVAL;
>> + }
>> +
>> + if (request_irq(nand->irq, (irq_handler_t)&ma35_nand_irq,
>> + IRQF_TRIGGER_HIGH, "ma35d1-nand", nand)) {
>> + dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
>> + return -ENXIO;
>> + }
>> +
>> + retval = nand_scan(chip, 1);
>> + if (retval)
>> + return retval;
>> +
>> + if (mtd_device_register(mtd, nand->parts, nand->nr_parts)) {
>> + nand_cleanup(chip);
>> + devm_kfree(&pdev->dev, nand);
>> + return retval;
>> + }
>> +
>> + pr_info("ma35-nfi: registered successfully! mtdid=%s\n", mtd->name);
> Drop, does not help.
>
> Drivers do not use pr_xxx anyway. Why your code is so inconsistent? It's
> like random junk glued together.
I will remove all the `pr_info`.
>> +
>> + return retval;
>> +}
>> +
>> +static void ma35_nand_remove(struct platform_device *pdev)
>> +{
>> + struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> + struct nand_chip *chip = &nand->chip;
>> + int ret;
>> +
>> + ret = mtd_device_unregister(nand_to_mtd(chip));
>> + WARN_ON(ret);
>> + nand_cleanup(chip);
>> +
>> + clk_disable_unprepare(nand->clk);
>> +
>> + kfree(nand);
>> + platform_set_drvdata(pdev, NULL);
>> +}
>> +
>> +/* PM Support */
>> +#ifdef CONFIG_PM
>> +static int ma35_nand_suspend(struct platform_device *pdev, pm_message_t pm)
>> +{
>> + struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> + unsigned long timeo = jiffies + HZ/2;
>> +
>> + /* wait DMAC to ready */
>> + while (1) {
>> + if ((readl(nand->regs + MA35_NFI_REG_DMACTL) & DMA_BUSY) == 0)
>> + break;
>> + if (time_after(jiffies, timeo))
>> + return -ETIMEDOUT;
>> + }
>> +
>> + clk_disable(nand->clk);
>> +
>> + return 0;
>> +}
>> +
>> +static int ma35_nand_resume(struct platform_device *pdev)
>> +{
>> + struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> +
>> + clk_enable(nand->clk);
>> + ma35_nand_hwecc_init(nand);
>> + ma35_nand_dmac_init(nand);
>> +
>> + return 0;
>> +}
>> +
>> +#else
>> +#define ma35_nand_suspend NULL
>> +#define ma35_nand_resume NULL
>> +#endif
>> +
>> +static const struct of_device_id ma35_nfi_of_match[] = {
>> + { .compatible = "nuvoton,ma35d1-nand" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, ma35_nfi_of_match);
>> +
>> +static struct platform_driver ma35_nand_driver = {
>> + .driver = {
>> + .name = "ma35d1-nand",
>> + .owner = THIS_MODULE,
>> + .of_match_table = of_match_ptr(ma35_nfi_of_match),
> Drop of_match_ptr. You have warnings here.
Okay. I will remove it.
>> + },
>> + .probe = ma35_nand_probe,
>> + .remove_new = ma35_nand_remove,
>> + .suspend = ma35_nand_suspend,
>> + .resume = ma35_nand_resume,
>> +};
>> +
>> +static int __init ma35_nand_init(void)
>> +{
>> + int ret;
>> +
>> + pr_info("ma35 mtd nand driver\n");
> NAK, drop, useless and really pointless.
I will remove all the `pr_info`.
>> +
>> + ret = platform_driver_register(&ma35_nand_driver);
>> + if (ret) {
>> + pr_warn("nand: failed to add device driver %s\n",
>> + ma35_nand_driver.driver.name);
>> + return ret;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void __exit ma35_nand_exit(void)
>> +{
>> + platform_driver_unregister(&ma35_nand_driver);
>> + pr_info("nand: unregistered successfully!\n");
> NAK, drop, useless and really pointless.
I will remove all the `pr_info`.
>> +}
>> +
>> +module_init(ma35_nand_init);
>> +module_exit(ma35_nand_exit);
> Do not open-code these functions, there are wrappers for this.
Okay. I will remove it.
>> +
>> +MODULE_DESCRIPTION("Nuvoton ma35 NAND driver");
>> +MODULE_AUTHOR("Hui-Ping Chen <hpchen0nvt@...il.com>");
>> +MODULE_LICENSE("GPL");
> Best regards,
> Krzysztof
Best regards,
Hui-Ping Chen
Powered by blists - more mailing lists