[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<SJ0PR03MB634347015AE14A06A3837E199B862@SJ0PR03MB6343.namprd03.prod.outlook.com>
Date: Tue, 13 Aug 2024 11:50:41 +0000
From: "Agarwal, Utsav" <Utsav.Agarwal@...log.com>
To: "Rob Herring (Arm)" <robh@...nel.org>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"Hennerich,
Michael" <Michael.Hennerich@...log.com>,
"Gaskell, Oliver"
<Oliver.Gaskell@...log.com>,
Conor Dooley <conor+dt@...nel.org>, "Sa, Nuno"
<Nuno.Sa@...log.com>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>,
"Bimpikas, Vasileios"
<Vasileios.Bimpikas@...log.com>,
Conor Dooley <conor.dooley@...rochip.com>,
"Artamonovs, Arturs" <Arturs.Artamonovs@...log.com>,
Krzysztof Kozlowski
<krzk+dt@...nel.org>,
"linux-input@...r.kernel.org"
<linux-input@...r.kernel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>
Subject: RE: [PATCH v10 3/3] dt-bindings: input: pure gpio support for adp5588
> -----Original Message-----
> From: Rob Herring (Arm) <robh@...nel.org>
> Sent: Tuesday, August 13, 2024 12:12 PM
> To: Agarwal, Utsav <Utsav.Agarwal@...log.com>
> Cc: devicetree@...r.kernel.org; Hennerich, Michael
> <Michael.Hennerich@...log.com>; Gaskell, Oliver
> <Oliver.Gaskell@...log.com>; Conor Dooley <conor+dt@...nel.org>; Sa, Nuno
> <Nuno.Sa@...log.com>; linux-kernel@...r.kernel.org; Bimpikas, Vasileios
> <Vasileios.Bimpikas@...log.com>; Conor Dooley
> <conor.dooley@...rochip.com>; Artamonovs, Arturs
> <Arturs.Artamonovs@...log.com>; Krzysztof Kozlowski <krzk+dt@...nel.org>;
> linux-input@...r.kernel.org; Dmitry Torokhov <dmitry.torokhov@...il.com>
> Subject: Re: [PATCH v10 3/3] dt-bindings: input: pure gpio support for adp5588
>
> [External]
>
>
> On Tue, 13 Aug 2024 10:51:33 +0100, Utsav Agarwal wrote:
> > Adding software support for enabling the pure gpio capability of the
> > device - which allows all I/O to be used as GPIO. Previously, I/O
> > configuration was limited by software to partial GPIO support only.
> >
> > When working in a pure gpio mode, the device does not require the
> > certain properties and hence, the following are now made optional:
> > - interrupts
> > - keypad,num-rows
> > - keypad,num-columns
> > - linux,keymap
> >
> > However, note that the above are required to be specified when
> > configuring the device as a keypad, for which dependencies have been added
> > such that specifying either one requires the remaining as well.
> >
> > Also, note that interrupts are made optional, but required when the device
> > has either been configured in keypad mode or as an interrupt controller.
> > This has been done since they may not necessarily be used when leveraging
> > the device purely for GPIO.
> >
> > Acked-by: Conor Dooley <conor.dooley@...rochip.com>
> > Signed-off-by: Utsav Agarwal <utsav.agarwal@...log.com>
> > ---
> > .../devicetree/bindings/input/adi,adp5588.yaml | 40 ++++++++++++++++++-
> ---
> > 1 file changed, 34 insertions(+), 6 deletions(-)
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/input/adi,adp5588.yaml:140:1: [error]
> syntax error: could not find expected ':' (syntax)
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-
> ci/linux/Documentation/devicetree/bindings/input/adi,adp5588.yaml: ignoring,
> error parsing file
> ./Documentation/devicetree/bindings/input/adi,adp5588.yaml:140:1: could not
> find expected ':'
> make[2]: *** Deleting file
> 'Documentation/devicetree/bindings/input/adi,adp5588.example.dts'
> Documentation/devicetree/bindings/input/adi,adp5588.yaml:140:1: could not
> find expected ':'
> make[2]: *** [Documentation/devicetree/bindings/Makefile:26:
> Documentation/devicetree/bindings/input/adi,adp5588.example.dts] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1432:
> dt_binding_check] Error 2
> make: *** [Makefile:224: __sub-make] Error 2
>
Apologies, it seems like I accidently deleted the characters towards the end
of the yaml file when making changes...
I will resubmit the correct version, however, will wait a bit more in case any
further feedback is required to be addressed.
> doc reference errors (make refcheckdocs):
>
> See
> https://urldefense.com/v3/__https://patchwork.ozlabs.org/project/devicetree-
> bindings/patch/20240813-adp5588_gpio_support-v10-3-
> aab3c52cc8bf@...log.com__;!!A3Ni8CS0y2Y!4tbdOq23VmmmlMgKDLoDULOV
> eThzR4nvCvIk8I7bZCtjY3uTC2j_s4VxQaHIy7PdTr2iKLCA8JvR2eRX$
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
- Utsav
Powered by blists - more mailing lists