| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Zr9nbWnADDB+ZOlg@p14s>
Date: Fri, 16 Aug 2024 08:51:25 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Beleswar Prasad Padhi <b-padhi@...com>
Cc: andersson@...nel.org, afd@...com, hnagalla@...com, u-kumar1@...com,
s-anna@...com, linux-remoteproc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 2/3] remoteproc: k3-r5: Acquire mailbox handle during
probe routine
On Fri, Aug 16, 2024 at 01:23:59PM +0530, Beleswar Prasad Padhi wrote:
> Hi Mathieu,
>
> On 14-08-2024 21:22, Mathieu Poirier wrote:
> > Hi Beleswar, On Thu, Aug 08, 2024 at 01: 11: 26PM +0530, Beleswar Padhi
> > wrote: > Acquire the mailbox handle during device probe and do not
> > release handle > in stop/detach routine or error paths. This removes the
> > redundant > requests for
> > ZjQcmQRYFpfptBannerStart
> > Report Suspicious
> > <https://us-phishalarm-ewt.proofpoint.com/EWT/v1/G3vK!vldnVV7DH2eSIoaksHjpMPogloWUPfAcp2-dEVbMoE1YA3kGFXdJXGAJUKJm$>
> >
> > ZjQcmQRYFpfptBannerEnd
> > Hi Beleswar,
> >
> > On Thu, Aug 08, 2024 at 01:11:26PM +0530, Beleswar Padhi wrote:
> > > Acquire the mailbox handle during device probe and do not release handle
> > > in stop/detach routine or error paths. This removes the redundant
> > > requests for mbox handle later during rproc start/attach. This also
> > > allows to defer remoteproc driver's probe if mailbox is not probed yet.
> > > > Signed-off-by: Beleswar Padhi <b-padhi@...com>
> > > ---
> > > drivers/remoteproc/ti_k3_r5_remoteproc.c | 78 +++++++++---------------
> > > 1 file changed, 30 insertions(+), 48 deletions(-)
> > > > diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c
> > b/drivers/remoteproc/ti_k3_r5_remoteproc.c
> > > index 57067308b3c0..8a63a9360c0f 100644
> > > --- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
> > > +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
> > > @@ -194,6 +194,10 @@ static void k3_r5_rproc_mbox_callback(struct mbox_client *client, void *data)
> > > const char *name = kproc->rproc->name;
> > > u32 msg = omap_mbox_message(data);
> > > > + /* Do not forward message from a detached core */
> > > + if (kproc->rproc->state == RPROC_DETACHED)
> > > + return;
> > > +
> > > dev_dbg(dev, "mbox msg: 0x%x\n", msg);
> > > > switch (msg) {
> > > @@ -229,6 +233,10 @@ static void k3_r5_rproc_kick(struct rproc *rproc, int vqid)
> > > mbox_msg_t msg = (mbox_msg_t)vqid;
> > > int ret;
> > > > + /* Do not forward message to a detached core */
> > > + if (kproc->rproc->state == RPROC_DETACHED)
> > > + return;
> > > +
> > > /* send the index of the triggered virtqueue in the mailbox payload */
> > > ret = mbox_send_message(kproc->mbox, (void *)msg);
> > > if (ret < 0)
> > > @@ -399,12 +407,9 @@ static int k3_r5_rproc_request_mbox(struct rproc *rproc)
> > > client->knows_txdone = false;
> > > > kproc->mbox = mbox_request_channel(client, 0);
> > > - if (IS_ERR(kproc->mbox)) {
> > > - ret = -EBUSY;
> > > - dev_err(dev, "mbox_request_channel failed: %ld\n",
> > > - PTR_ERR(kproc->mbox));
> > > - return ret;
> > > - }
> > > + if (IS_ERR(kproc->mbox))
> > > + return dev_err_probe(dev, PTR_ERR(kproc->mbox),
> > > + "mbox_request_channel failed\n");
> > > > /*
> > > * Ping the remote processor, this is only for sanity-sake for now;
> > > @@ -552,10 +557,6 @@ static int k3_r5_rproc_start(struct rproc *rproc)
> > > u32 boot_addr;
> > > int ret;
> > > > - ret = k3_r5_rproc_request_mbox(rproc);
> > > - if (ret)
> > > - return ret;
> > > -
> > > boot_addr = rproc->bootaddr;
> > > /* TODO: add boot_addr sanity checking */
> > > dev_dbg(dev, "booting R5F core using boot addr = 0x%x\n", boot_addr);
> > > @@ -564,7 +565,7 @@ static int k3_r5_rproc_start(struct rproc *rproc)
> > > core = kproc->core;
> > > ret = ti_sci_proc_set_config(core->tsp, boot_addr, 0, 0);
> > > if (ret)
> > > - goto put_mbox;
> > > + return ret;
> > > > /* unhalt/run all applicable cores */
> > > if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
> > > @@ -580,13 +581,12 @@ static int k3_r5_rproc_start(struct rproc *rproc)
> > > if (core != core0 && core0->rproc->state == RPROC_OFFLINE) {
> > > dev_err(dev, "%s: can not start core 1 before core 0\n",
> > > __func__);
> > > - ret = -EPERM;
> > > - goto put_mbox;
> > > + return -EPERM;
> > > }
> > > > ret = k3_r5_core_run(core);
> > > if (ret)
> > > - goto put_mbox;
> > > + return ret;
> > > }
> > > > return 0;
> > > @@ -596,8 +596,6 @@ static int k3_r5_rproc_start(struct rproc *rproc)
> > > if (k3_r5_core_halt(core))
> > > dev_warn(core->dev, "core halt back failed\n");
> > > }
> > > -put_mbox:
> > > - mbox_free_channel(kproc->mbox);
> > > return ret;
> > > }
> > > > @@ -658,8 +656,6 @@ static int k3_r5_rproc_stop(struct rproc
> > *rproc)
> > > goto out;
> > > }
> > > > - mbox_free_channel(kproc->mbox);
> > > -
> > > return 0;
> > > > unroll_core_halt:
> > > @@ -674,42 +670,22 @@ static int k3_r5_rproc_stop(struct rproc *rproc)
> > > /*
> > > * Attach to a running R5F remote processor (IPC-only mode)
> > > *
> > > - * The R5F attach callback only needs to request the mailbox, the remote
> > > - * processor is already booted, so there is no need to issue any TI-SCI
> > > - * commands to boot the R5F cores in IPC-only mode. This callback is invoked
> > > - * only in IPC-only mode.
> > > + * The R5F attach callback is a NOP. The remote processor is already booted, and
> > > + * all required resources have been acquired during probe routine, so there is
> > > + * no need to issue any TI-SCI commands to boot the R5F cores in IPC-only mode.
> > > + * This callback is invoked only in IPC-only mode and exists because
> > > + * rproc_validate() checks for its existence.
> >
> > Excellent documentation.
>
>
> Thanks!
>
> >
> > > */
> > > -static int k3_r5_rproc_attach(struct rproc *rproc)
> > > -{
> > > - struct k3_r5_rproc *kproc = rproc->priv;
> > > - struct device *dev = kproc->dev;
> > > - int ret;
> > > -
> > > - ret = k3_r5_rproc_request_mbox(rproc);
> > > - if (ret)
> > > - return ret;
> > > -
> > > - dev_info(dev, "R5F core initialized in IPC-only mode\n");
> > > - return 0;
> > > -}
> > > +static int k3_r5_rproc_attach(struct rproc *rproc) { return 0; }
> > > > /*
> > > * Detach from a running R5F remote processor (IPC-only mode)
> > > *
> > > - * The R5F detach callback performs the opposite operation to attach callback
> > > - * and only needs to release the mailbox, the R5F cores are not stopped and
> > > - * will be left in booted state in IPC-only mode. This callback is invoked
> > > - * only in IPC-only mode.
> > > + * The R5F detach callback is a NOP. The R5F cores are not stopped and will be
> > > + * left in booted state in IPC-only mode. This callback is invoked only in
> > > + * IPC-only mode and exists for sanity sake.
> >
> > I would add the part about detach() being a NOP to attach() above...
> >
> > > */
> > > -static int k3_r5_rproc_detach(struct rproc *rproc)
> > > -{
> > > - struct k3_r5_rproc *kproc = rproc->priv;
> > > - struct device *dev = kproc->dev;
> > > -
> > > - mbox_free_channel(kproc->mbox);
> > > - dev_info(dev, "R5F core deinitialized in IPC-only mode\n");
> > > - return 0;
> > > -}
> > > +static int k3_r5_rproc_detach(struct rproc *rproc) { return 0; }
> >
> > ... and just remove this.
>
>
> Thanks for the comments. But dropping k3_r5_rproc_detach() would mean we
> would get -EINVAL[1] while trying to detach the core from sysfs[0]. Is it
> expected?
>
You are correct. I have applied your patch.
> [0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/remoteproc_sysfs.c#n202
> [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/remoteproc_core.c#n1752
>
> >
> > Otherwise this patch looks good.
> >
> > > > /*
> > > * This function implements the .get_loaded_rsc_table() callback and is used
> > > @@ -1278,6 +1254,10 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev)
> > > kproc->rproc = rproc;
> > > core->rproc = rproc;
> > > > + ret = k3_r5_rproc_request_mbox(rproc);
> > > + if (ret)
> > > + return ret;
> > > +
> > > ret = k3_r5_rproc_configure_mode(kproc);
> > > if (ret < 0)
> > > goto out;
> > > @@ -1392,6 +1372,8 @@ static void k3_r5_cluster_rproc_exit(void *data)
> > > }
> > > }
> > > > + mbox_free_channel(kproc->mbox);
> > > +
> > > rproc_del(rproc);
> > > > k3_r5_reserved_mem_exit(kproc);
> > > -- > 2.34.1
> > >
Powered by blists - more mailing lists