lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240817155833.4dcc3004@jic23-huawei>
Date: Sat, 17 Aug 2024 15:58:33 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Alexandru Ardelean <aardelean@...libre.com>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
 Michael.Hennerich@...log.com, lars@...afoo.de, gstols@...libre.com
Subject: Re: [PATCH] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from
 probe

On Sat, 17 Aug 2024 17:42:15 +0300
Alexandru Ardelean <aardelean@...libre.com> wrote:

> This change moves the logic for setting up SW mode (during probe) into it's
> own function.
> 
> With the addition of some newer parts, the SW-mode part can get a little
> more complicated.
> So it's a bit better to have a separate function for this.
This looks fine but put it on the start of the series that makes it more
complex.  I may pick it off that series before the bulk of the code
but if it's sent in such a series the link tags etc will let people
see 'why' it is a good idea.

Jonathan

> 
> Signed-off-by: Alexandru Ardelean <aardelean@...libre.com>
> ---
>  drivers/iio/adc/ad7606.c | 43 ++++++++++++++++++++++++----------------
>  1 file changed, 26 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> index 68481e97e50a..192b9cd56b45 100644
> --- a/drivers/iio/adc/ad7606.c
> +++ b/drivers/iio/adc/ad7606.c
> @@ -545,6 +545,29 @@ static const struct iio_trigger_ops ad7606_trigger_ops = {
>  	.validate_device = iio_trigger_validate_own_device,
>  };
>  
> +static int ad7606_sw_mode_setup(struct iio_dev *indio_dev)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +
> +	if (!st->bops->sw_mode_config)
> +		return 0;
> +
> +	st->sw_mode_en = device_property_present(st->dev, "adi,sw-mode");
> +	if (!st->sw_mode_en)
> +		return 0;
> +
> +	indio_dev->info = &ad7606_info_os_range_and_debug;
> +
> +	/* Scale of 0.076293 is only available in sw mode */
> +	st->scale_avail = ad7616_sw_scale_avail;
> +	st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
> +
> +	/* After reset, in software mode, ±10 V is set by default */
> +	memset32(st->range, 2, ARRAY_SIZE(st->range));
> +
> +	return st->bops->sw_mode_config(indio_dev);
> +}
> +
>  int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
>  		 const char *name, unsigned int id,
>  		 const struct ad7606_bus_ops *bops)
> @@ -617,23 +640,9 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
>  	st->write_scale = ad7606_write_scale_hw;
>  	st->write_os = ad7606_write_os_hw;
>  
> -	if (st->bops->sw_mode_config)
> -		st->sw_mode_en = device_property_present(st->dev,
> -							 "adi,sw-mode");
> -
> -	if (st->sw_mode_en) {
> -		/* Scale of 0.076293 is only available in sw mode */
> -		st->scale_avail = ad7616_sw_scale_avail;
> -		st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
> -
> -		/* After reset, in software mode, ±10 V is set by default */
> -		memset32(st->range, 2, ARRAY_SIZE(st->range));
> -		indio_dev->info = &ad7606_info_os_range_and_debug;
> -
> -		ret = st->bops->sw_mode_config(indio_dev);
> -		if (ret < 0)
> -			return ret;
> -	}
> +	ret = ad7606_sw_mode_setup(indio_dev);
> +	if (ret)
> +		return ret;
>  
>  	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
>  					  indio_dev->name,


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ