lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CA+GgBR8bUBjr2XKQVnOr1i+iPJadZAGAk8VKFTrjVH98hkfqug@mail.gmail.com>
Date: Sun, 18 Aug 2024 08:16:12 +0300
From: Alexandru Ardelean <aardelean@...libre.com>
To: Jonathan Cameron <jic23@...nel.org>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org, 
	Michael.Hennerich@...log.com, lars@...afoo.de, gstols@...libre.com
Subject: Re: [PATCH] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe

On Sat, Aug 17, 2024 at 5:58 PM Jonathan Cameron <jic23@...nel.org> wrote:
>
> On Sat, 17 Aug 2024 17:42:15 +0300
> Alexandru Ardelean <aardelean@...libre.com> wrote:
>
> > This change moves the logic for setting up SW mode (during probe) into it's
> > own function.
> >
> > With the addition of some newer parts, the SW-mode part can get a little
> > more complicated.
> > So it's a bit better to have a separate function for this.
> This looks fine but put it on the start of the series that makes it more
> complex.  I may pick it off that series before the bulk of the code
> but if it's sent in such a series the link tags etc will let people
> see 'why' it is a good idea.

Sure.
Will spin-up the series.

>
> Jonathan
>
> >
> > Signed-off-by: Alexandru Ardelean <aardelean@...libre.com>
> > ---
> >  drivers/iio/adc/ad7606.c | 43 ++++++++++++++++++++++++----------------
> >  1 file changed, 26 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> > index 68481e97e50a..192b9cd56b45 100644
> > --- a/drivers/iio/adc/ad7606.c
> > +++ b/drivers/iio/adc/ad7606.c
> > @@ -545,6 +545,29 @@ static const struct iio_trigger_ops ad7606_trigger_ops = {
> >       .validate_device = iio_trigger_validate_own_device,
> >  };
> >
> > +static int ad7606_sw_mode_setup(struct iio_dev *indio_dev)
> > +{
> > +     struct ad7606_state *st = iio_priv(indio_dev);
> > +
> > +     if (!st->bops->sw_mode_config)
> > +             return 0;
> > +
> > +     st->sw_mode_en = device_property_present(st->dev, "adi,sw-mode");
> > +     if (!st->sw_mode_en)
> > +             return 0;
> > +
> > +     indio_dev->info = &ad7606_info_os_range_and_debug;
> > +
> > +     /* Scale of 0.076293 is only available in sw mode */
> > +     st->scale_avail = ad7616_sw_scale_avail;
> > +     st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
> > +
> > +     /* After reset, in software mode, ±10 V is set by default */
> > +     memset32(st->range, 2, ARRAY_SIZE(st->range));
> > +
> > +     return st->bops->sw_mode_config(indio_dev);
> > +}
> > +
> >  int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> >                const char *name, unsigned int id,
> >                const struct ad7606_bus_ops *bops)
> > @@ -617,23 +640,9 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> >       st->write_scale = ad7606_write_scale_hw;
> >       st->write_os = ad7606_write_os_hw;
> >
> > -     if (st->bops->sw_mode_config)
> > -             st->sw_mode_en = device_property_present(st->dev,
> > -                                                      "adi,sw-mode");
> > -
> > -     if (st->sw_mode_en) {
> > -             /* Scale of 0.076293 is only available in sw mode */
> > -             st->scale_avail = ad7616_sw_scale_avail;
> > -             st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
> > -
> > -             /* After reset, in software mode, ±10 V is set by default */
> > -             memset32(st->range, 2, ARRAY_SIZE(st->range));
> > -             indio_dev->info = &ad7606_info_os_range_and_debug;
> > -
> > -             ret = st->bops->sw_mode_config(indio_dev);
> > -             if (ret < 0)
> > -                     return ret;
> > -     }
> > +     ret = ad7606_sw_mode_setup(indio_dev);
> > +     if (ret)
> > +             return ret;
> >
> >       st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
> >                                         indio_dev->name,
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ