[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240820083323.62485-1-rongqianfeng@vivo.com>
Date: Tue, 20 Aug 2024 16:33:22 +0800
From: Rong Qianfeng <rongqianfeng@...o.com>
To: Keerthy <j-keerthy@...com>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Shubhrajyoti Datta <shubhrajyoti.datta@....com>,
Srinivas Neeli <srinivas.neeli@....com>,
Michal Simek <michal.simek@....com>,
linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: opensource.kernel@...o.com,
Rong Qianfeng <rongqianfeng@...o.com>
Subject: [PATCH] gpio: Simplify using devm_clk_get_enabled()
devm_clk_get_enabled() will call devm_clk_get() + clk_prepare_enable()
and the clock will automatically be disabled, unprepared and freed when
the device is unbound from the bus. So simplify .probe() and .remove()
accordingly.
Signed-off-by: Rong Qianfeng <rongqianfeng@...o.com>
---
drivers/gpio/gpio-davinci.c | 13 ++-----------
drivers/gpio/gpio-stp-xway.c | 10 ++--------
drivers/gpio/gpio-zynq.c | 10 +---------
3 files changed, 5 insertions(+), 28 deletions(-)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 1d0175d6350b..945832d54ac3
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -482,7 +482,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
{
unsigned gpio, bank;
int irq;
- int ret;
struct clk *clk;
u32 binten = 0;
unsigned ngpio;
@@ -504,21 +503,16 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
ngpio = pdata->ngpio;
- clk = devm_clk_get(dev, "gpio");
+ clk = devm_clk_get_enabled(dev, "gpio");
if (IS_ERR(clk)) {
dev_err(dev, "Error %ld getting gpio clock\n", PTR_ERR(clk));
return PTR_ERR(clk);
}
- ret = clk_prepare_enable(clk);
- if (ret)
- return ret;
-
if (!pdata->gpio_unbanked) {
irq = devm_irq_alloc_descs(dev, -1, 0, ngpio, 0);
if (irq < 0) {
dev_err(dev, "Couldn't allocate IRQ numbers\n");
- clk_disable_unprepare(clk);
return irq;
}
@@ -527,7 +521,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
chips);
if (!irq_domain) {
dev_err(dev, "Couldn't register an IRQ domain\n");
- clk_disable_unprepare(clk);
return -ENODEV;
}
}
@@ -596,10 +589,8 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
sizeof(struct
davinci_gpio_irq_data),
GFP_KERNEL);
- if (!irqdata) {
- clk_disable_unprepare(clk);
+ if (!irqdata)
return -ENOMEM;
- }
irqdata->regs = g;
irqdata->bank_num = bank;
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
index 053d616f2e02..5a6406d1f03a
--- a/drivers/gpio/gpio-stp-xway.c
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -296,23 +296,17 @@ static int xway_stp_probe(struct platform_device *pdev)
if (!of_property_read_bool(pdev->dev.of_node, "lantiq,rising"))
chip->edge = XWAY_STP_FALLING;
- clk = devm_clk_get(&pdev->dev, NULL);
+ clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "Failed to get clock\n");
return PTR_ERR(clk);
}
- ret = clk_prepare_enable(clk);
- if (ret)
- return ret;
-
xway_stp_hw_init(chip);
ret = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
- if (ret) {
- clk_disable_unprepare(clk);
+ if (ret)
return ret;
- }
dev_info(&pdev->dev, "Init done\n");
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 466e23031afc..1a42336dfc1d
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -940,16 +940,10 @@ static int zynq_gpio_probe(struct platform_device *pdev)
chip->ngpio = gpio->p_data->ngpio;
/* Retrieve GPIO clock */
- gpio->clk = devm_clk_get(&pdev->dev, NULL);
+ gpio->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(gpio->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(gpio->clk), "input clock not found.\n");
- ret = clk_prepare_enable(gpio->clk);
- if (ret) {
- dev_err(&pdev->dev, "Unable to enable clock.\n");
- return ret;
- }
-
spin_lock_init(&gpio->dirlock);
pm_runtime_set_active(&pdev->dev);
@@ -999,7 +993,6 @@ static int zynq_gpio_probe(struct platform_device *pdev)
pm_runtime_put(&pdev->dev);
err_pm_dis:
pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(gpio->clk);
return ret;
}
@@ -1019,7 +1012,6 @@ static void zynq_gpio_remove(struct platform_device *pdev)
if (ret < 0)
dev_warn(&pdev->dev, "pm_runtime_get_sync() Failed\n");
gpiochip_remove(&gpio->chip);
- clk_disable_unprepare(gpio->clk);
device_set_wakeup_capable(&pdev->dev, 0);
pm_runtime_disable(&pdev->dev);
}
--
2.39.0
Powered by blists - more mailing lists