[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <134471bf20329ab3def09f0a56a6dfc88e1a395a.camel@phytec.de>
Date: Tue, 20 Aug 2024 08:52:26 +0000
From: Yannic Moog <Y.Moog@...tec.de>
To: Benjamin Hahn <B.Hahn@...tec.de>, "kernel@...gutronix.de"
<kernel@...gutronix.de>, "festevam@...il.com" <festevam@...il.com>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>, "robh@...nel.org"
<robh@...nel.org>, "shawnguo@...nel.org" <shawnguo@...nel.org>,
"krzk+dt@...nel.org" <krzk+dt@...nel.org>, "conor+dt@...nel.org"
<conor+dt@...nel.org>, Teresa Remmet <T.Remmet@...tec.de>
CC: "imx@...ts.linux.dev" <imx@...ts.linux.dev>, PHYTEC Upstream
<upstream@...ts.phytec.de>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [Upstream] [PATCH] arm64: dts: imx8mp-phyboard-pollux-rdk: Add
support for PCIe
Hello Benjamin,
On Tue, 2024-08-13 at 14:02 +0200, Benjamin Hahn wrote:
> Add support for the Mini PCIe slot.
>
> Signed-off-by: Benjamin Hahn <B.Hahn@...tec.de>
> ---
> .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 42 ++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> index 00a240484c25..0ecb2f62c37f 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> @@ -6,6 +6,7 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
> #include <dt-bindings/leds/leds-pca9532.h>
> #include <dt-bindings/pwm/pwm.h>
> #include "imx8mp-phycore-som.dtsi"
> @@ -63,6 +64,17 @@ reg_can2_stby: regulator-can2-stby {
> regulator-name = "can2-stby";
> };
>
> + reg_pcie0: regulator-pcie {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0_reg>;
> + regulator-name = "MPCIE_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
pcie uses the reg_vcc_3v3_sw. Drop this node and use the appropriate regulator instead.
> reg_lvds1_reg_en: regulator-lvds1 {
> compatible = "regulator-fixed";
> enable-active-high;
> @@ -195,6 +207,23 @@ &snvs_pwrkey {
> status = "okay";
> };
>
> +&pcie_phy {
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
> + fsl,clkreq-unsupported;
Why do you have this as unsupported? We have a GPIO connected to CLKREQ.
> + clocks = <&hsio_blk_ctrl>;
> + clock-names = "ref";
> + status = "okay";
> +};
> +
> +/* Mini PCIe */
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
> + vpcie-supply = <®_pcie0>;
> + status = "okay";
> +};
> +
> &pwm3 {
> status = "okay";
> pinctrl-names = "default";
> @@ -366,6 +395,19 @@ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x12
> >;
> };
>
> + pinctrl_pcie0: pcie0grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x60 /* open drain, pull up */
> + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40
Can you please reorder numerically ascending?
You are missing GPIO1 10 used for WAKE#.
> + >;
> + };
> +
> + pinctrl_pcie0_reg: pcie0reggrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x40
This gpio muxing should be in the pcie0grp.
Yannic
> + >;
> + };
> +
> pinctrl_pwm3: pwm3grp {
> fsl,pins = <
> MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x12
>
> ---
> base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba
> change-id: 20240813-wip-bhahn-add_pcie_support-b9bd75fc4d98
>
> Best regards,
Powered by blists - more mailing lists