| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240821085644.240009-8-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Wed, 21 Aug 2024 09:56:43 +0100
From: Prabhakar <prabhakar.csengg@...il.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Prabhakar <prabhakar.csengg@...il.com>,
Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH v3 7/8] arm64: dts: renesas: r9a09g057h44-gp-evk: Enable OSTM, I2C, and SDHI
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Enable OSTM0-OSTM7, RIIC{0,1,2,3,6,7,8}, and SDHI1 (available on the SD2
connector) on the RZ/V2H GP-EVK platform.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
note, for i2c nodes we are defaulting the clock-frequency and this
will be updated when slave nodes are enabled.
v2->v3
- Set the default slew reset value for SDHI1 pins
v1->v2
- New patch
---
.../boot/dts/renesas/r9a09g057h44-gp-evk.dts | 184 ++++++++++++++++++
1 file changed, 184 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-gp-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-gp-evk.dts
index 593c48181248..1c532810dad0 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h44-gp-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-gp-evk.dts
@@ -7,6 +7,8 @@
/dts-v1/;
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
#include "r9a09g057.dtsi"
/ {
@@ -14,6 +16,14 @@ / {
compatible = "renesas,gp-evk", "renesas,r9a09g057h44", "renesas,r9a09g057";
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ mmc1 = &sdhi1;
serial0 = &scif;
};
@@ -32,17 +42,179 @@ memory@...000000 {
device_type = "memory";
reg = <0x2 0x40000000 0x2 0x00000000>;
};
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vqmmc_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHI1 VccQ";
+ gpios = <&pinctrl RZG2L_GPIO(10, 2) GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios-states = <0>;
+ states = <3300000 0>, <1800000 1>;
+ };
};
&audio_extal_clk {
clock-frequency = <22579200>;
};
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c7 {
+ pinctrl-0 = <&i2c7_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c8 {
+ pinctrl-0 = <&i2c8_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ostm0 {
+ status = "okay";
+};
+
+&ostm1 {
+ status = "okay";
+};
+
+&ostm2 {
+ status = "okay";
+};
+
+&ostm3 {
+ status = "okay";
+};
+
+&ostm4 {
+ status = "okay";
+};
+
+&ostm5 {
+ status = "okay";
+};
+
+&ostm6 {
+ status = "okay";
+};
+
+&ostm7 {
+ status = "okay";
+};
+
&pinctrl {
+ i2c0_pins: i2c0 {
+ pinmux = <RZG2L_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */
+ <RZG2L_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */
+ };
+
+ i2c1_pins: i2c1 {
+ pinmux = <RZG2L_PORT_PINMUX(3, 2, 1)>, /* I2C1_SDA */
+ <RZG2L_PORT_PINMUX(3, 3, 1)>; /* I2C1_SCL */
+ };
+
+ i2c2_pins: i2c2 {
+ pinmux = <RZG2L_PORT_PINMUX(2, 0, 4)>, /* I2C2_SDA */
+ <RZG2L_PORT_PINMUX(2, 1, 4)>; /* I2C2_SCL */
+ };
+
+ i2c3_pins: i2c3 {
+ pinmux = <RZG2L_PORT_PINMUX(3, 6, 1)>, /* I2C3_SDA */
+ <RZG2L_PORT_PINMUX(3, 7, 1)>; /* I2C3_SCL */
+ };
+
+ i2c6_pins: i2c6 {
+ pinmux = <RZG2L_PORT_PINMUX(4, 4, 1)>, /* I2C6_SDA */
+ <RZG2L_PORT_PINMUX(4, 5, 1)>; /* I2C6_SCL */
+ };
+
+ i2c7_pins: i2c7 {
+ pinmux = <RZG2L_PORT_PINMUX(4, 6, 1)>, /* I2C7_SDA */
+ <RZG2L_PORT_PINMUX(4, 7, 1)>; /* I2C7_SCL */
+ };
+
+ i2c8_pins: i2c8 {
+ pinmux = <RZG2L_PORT_PINMUX(0, 6, 1)>, /* I2C8_SDA */
+ <RZG2L_PORT_PINMUX(0, 7, 1)>; /* I2C8_SCL */
+ };
+
scif_pins: scif {
pins = "SCIF_TXD", "SCIF_RXD";
renesas,output-impedance = <1>;
};
+
+ sd1-pwr-en-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(10, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "sd1_pwr_en";
+ };
+
+ sdhi1_pins: sd1 {
+ sd1_dat_cmd {
+ pins = "SD1DAT0", "SD1DAT1", "SD1DAT2", "SD1DAT3", "SD1CMD";
+ input-enable;
+ renesas,output-impedance = <3>;
+ slew-rate = <0>;
+ };
+
+ sd1_clk {
+ pins = "SD1CLK";
+ renesas,output-impedance = <3>;
+ slew-rate = <0>;
+ };
+
+ sd1_cd {
+ pinmux = <RZG2L_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
+ };
+ };
};
&qextal_clk {
@@ -59,3 +231,15 @@ &scif {
status = "okay";
};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vqmmc_sdhi1>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
--
2.34.1
Powered by blists - more mailing lists