[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240822152801.602318-16-claudiu.beznea.uj@bp.renesas.com>
Date: Thu, 22 Aug 2024 18:28:00 +0300
From: Claudiu <claudiu.beznea@...on.dev>
To: vkoul@...nel.org,
kishon@...nel.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
p.zabel@...gutronix.de,
geert+renesas@...der.be,
magnus.damm@...il.com,
gregkh@...uxfoundation.org,
mturquette@...libre.com,
sboyd@...nel.org,
yoshihiro.shimoda.uh@...esas.com,
biju.das.jz@...renesas.com,
ulf.hansson@...aro.org
Cc: linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
linux-usb@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org,
linux-pm@...r.kernel.org,
claudiu.beznea@...on.dev,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH 15/16] arm64: dts: renesas: rzg3s-smarc: Enable USB support
From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Enable USB support (host, device, USB PHYs and sysc).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi | 61 ++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
index deb2ad37bb2e..fd9355936803 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -66,6 +66,29 @@ vccq_sdhi1: regulator-vccq-sdhi1 {
};
};
+&ehci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
&pinctrl {
key-1-gpio-hog {
gpio-hog;
@@ -124,6 +147,27 @@ cd {
pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
};
};
+
+ usb0_pins: usb0 {
+ peri {
+ pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */
+ <RZG2L_PORT_PINMUX(5, 2, 1)>; /* OVC */
+ };
+
+ otg {
+ pinmux = <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */
+ bias-pull-up;
+ };
+ };
+
+ usb1_pins: usb1 {
+ pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */
+ <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */
+ };
+};
+
+&phyrst {
+ status = "okay";
};
&scif0 {
@@ -144,3 +188,20 @@ &sdhi1 {
max-frequency = <125000000>;
status = "okay";
};
+
+&sysc {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ vbus-supply = <&usb0_vbus_otg>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.39.2
Powered by blists - more mailing lists