lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZsysP_Ze4kYcfQ23@louis-chauvet-laptop>
Date: Mon, 26 Aug 2024 18:24:31 +0200
From: Louis Chauvet <louis.chauvet@...tlin.com>
To: José Expósito <jose.exposito89@...il.com>
Cc: airlied@...il.com, arthurgrillo@...eup.net, daniel@...ll.ch,
	dri-devel@...ts.freedesktop.org, hamohammed.sa@...il.com,
	jeremie.dautheribes@...tlin.com, linux-kernel@...r.kernel.org,
	maarten.lankhorst@...ux.intel.com, mairacanal@...eup.net,
	melissa.srw@...il.com, miquel.raynal@...tlin.com,
	mripard@...nel.org, nicolejadeyee@...gle.com,
	rodrigosiqueiramelo@...il.com, seanpaul@...gle.com,
	thomas.petazzoni@...tlin.com, tzimmermann@...e.de
Subject: Re: [PATCH RFC 1/4] drm/vkms: Switch to managed for connector

Le 20/08/24 - 11:09, José Expósito a écrit :
> Hi Louis,
> 
> Thanks for these patches. Easy review as my configfs series included similar
> patches :) I think that this series could be easily rebased on drm-misc-next,
> but I don't know if that'd add a lot of work rebasing other series. I'd be nice
> to get these 4 merged.

It is not trivial to rebase before the split-header series. I will see if 
I can rebase this+split header easly, but I fear few conflicts.
 
> > The current VKMS driver uses non-managed function to create connectors. It
> > is not an issue yet, but in order to support multiple devices easily,
> > convert this code to use drm and device managed helpers.
> > 
> > Signed-off-by: Louis Chauvet <louis.chauvet@...tlin.com>
> 
> Reviewed-by: José Expósito <jose.exposito89@...il.com>

Thanks! I will test my v2 and send it tomorrow!

> > ---
> >  drivers/gpu/drm/vkms/vkms_drv.h    |  1 -
> >  drivers/gpu/drm/vkms/vkms_output.c | 22 ++++++++++------------
> >  2 files changed, 10 insertions(+), 13 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> > index f74a5c2045f9..cea7b2640c5d 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> > @@ -43,7 +43,6 @@
> >  struct vkms_output {
> >  	struct drm_crtc crtc;
> >  	struct drm_encoder encoder;
> > -	struct drm_connector connector;
> >  	struct drm_writeback_connector wb_connector;
> >  	struct hrtimer vblank_hrtimer;
> >  	ktime_t period_ns;
> > diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> > index 20073a00b200..4767838c3a73 100644
> > --- a/drivers/gpu/drm/vkms/vkms_output.c
> > +++ b/drivers/gpu/drm/vkms/vkms_output.c
> > @@ -3,6 +3,7 @@
> >  #include <drm/drm_atomic_helper.h>
> >  #include <drm/drm_edid.h>
> >  #include <drm/drm_probe_helper.h>
> > +#include <drm/drm_managed.h>
> 
> Nit: Keep includes sorted alphabetically if possible
> 
> >  
> >  #include "vkms_writeback.h"
> >  #include "vkms_plane.h"
> > @@ -10,7 +11,6 @@
> >  
> >  static const struct drm_connector_funcs vkms_connector_funcs = {
> >  	.fill_modes = drm_helper_probe_single_connector_modes,
> > -	.destroy = drm_connector_cleanup,
> >  	.reset = drm_atomic_helper_connector_reset,
> >  	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> >  	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> > @@ -54,7 +54,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int possible_crtc_index)
> >  {
> >  	struct vkms_output *output = &vkmsdev->output;
> >  	struct drm_device *dev = &vkmsdev->drm;
> > -	struct drm_connector *connector = &output->connector;
> > +	struct drm_connector *connector;
> >  	struct drm_encoder *encoder = &output->encoder;
> >  	struct drm_crtc *crtc = &output->crtc;
> >  	struct vkms_plane *primary, *cursor = NULL;
> > @@ -90,11 +90,15 @@ int vkms_output_init(struct vkms_device *vkmsdev, int possible_crtc_index)
> >  	if (ret)
> >  		return ret;
> >  
> > -	ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
> > -				 DRM_MODE_CONNECTOR_VIRTUAL);
> > +	connector = drmm_kzalloc(&vkmsdev->drm, sizeof(*connector), GFP_KERNEL);
> 
> "&vkmsdev->drm" can be replaced with "dev".
> 
> > +	if (!connector)
> 
> For consistency with the init function, it'd be nice to log this error as well:
> 
> 		DRM_ERROR("Failed to allocate connector\n");
> 
> > +		return -ENOMEM;
> > +
> > +	ret = drmm_connector_init(dev, connector, &vkms_connector_funcs,
> > +				  DRM_MODE_CONNECTOR_VIRTUAL, NULL);
> >  	if (ret) {
> >  		DRM_ERROR("Failed to init connector\n");
> > -		goto err_connector;
> > +		return ret;
> >  	}
> >  
> >  	drm_connector_helper_add(connector, &vkms_conn_helper_funcs);
> > @@ -103,7 +107,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int possible_crtc_index)
> >  			       DRM_MODE_ENCODER_VIRTUAL, NULL);
> >  	if (ret) {
> >  		DRM_ERROR("Failed to init encoder\n");
> > -		goto err_encoder;
> > +		return ret;
> >  	}
> >  	/*
> >  	 * This is an hardcoded value to select crtc for the encoder.
> > @@ -130,11 +134,5 @@ int vkms_output_init(struct vkms_device *vkmsdev, int possible_crtc_index)
> >  err_attach:
> >  	drm_encoder_cleanup(encoder);
> >  
> > -err_encoder:
> > -	drm_connector_cleanup(connector);
> > -
> > -err_connector:
> > -	drm_crtc_cleanup(crtc);
> > -
> 
> I think that, technically, err_encoder should call drm_crtc_cleanup() in this
> patch. However, since a future patch will remove this code I don't find it that
> relevant.

True, I will keep it to avoid issues. I believe it is a remnant of my many 
rebases.

> >  	return ret;
> >  }

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ