[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdUyW_8ma++zP8bRLMh120mysSD7206On0euRG7+S-081A@mail.gmail.com>
Date: Mon, 26 Aug 2024 14:49:42 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Prabhakar <prabhakar.csengg@...il.com>
Cc: Magnus Damm <magnus.damm@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH v3 7/8] arm64: dts: renesas: r9a09g057h44-gp-evk: Enable
OSTM, I2C, and SDHI
Hi Prabhakar,
On Wed, Aug 21, 2024 at 10:56 AM Prabhakar <prabhakar.csengg@...il.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
>
> Enable OSTM0-OSTM7, RIIC{0,1,2,3,6,7,8}, and SDHI1 (available on the SD2
> connector) on the RZ/V2H GP-EVK platform.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Thanks for your patch!
> ---
> note, for i2c nodes we are defaulting the clock-frequency and this
> will be updated when slave nodes are enabled.
This causes lots of "'clock-frequency' is a required property" warnings
from "make dtbs". Moreover, what if I run i2cdetect on any of these
buses? Could it run the bus faster than the board wiring allows?
Hence I think you should add "clock-frequency" properties to all
enabled I2C bus nodes.
The rest LGTM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists