[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANAwSgQpu9NYugu_=PCVQGXiXCptxLT2Q1xQ5KqbwvkU0kfWDQ@mail.gmail.com>
Date: Tue, 27 Aug 2024 12:14:31 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Wu Bo <bo.wu@...o.com>
Cc: linux-kernel@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>, Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Wu Bo <wubo.oduw@...il.com>
Subject: Re: [PATCH v3] PCI: armada8k: change to use devm_clk_get_enabled() helper
Hi Wu Bo,
On Tue, 27 Aug 2024 at 07:55, Wu Bo <bo.wu@...o.com> wrote:
>
> Use devm_clk_get_enabled() instead of devm_clk_get() to make the code
> cleaner and avoid calling clk_disable_unprepare()
>
> Signed-off-by: Wu Bo <bo.wu@...o.com>
> ---
> drivers/pci/controller/dwc/pcie-armada8k.c | 36 ++++++++--------------
> 1 file changed, 13 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
> index b5c599ccaacf..e7ef6c2641b8 100644
> --- a/drivers/pci/controller/dwc/pcie-armada8k.c
> +++ b/drivers/pci/controller/dwc/pcie-armada8k.c
> @@ -284,23 +284,17 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>
> pcie->pci = pci;
>
> - pcie->clk = devm_clk_get(dev, NULL);
> + pcie->clk = devm_clk_get_enabled(dev, NULL);
> if (IS_ERR(pcie->clk))
> - return PTR_ERR(pcie->clk);
> -
> - ret = clk_prepare_enable(pcie->clk);
> - if (ret)
> - return ret;
> -
> - pcie->clk_reg = devm_clk_get(dev, "reg");
> - if (pcie->clk_reg == ERR_PTR(-EPROBE_DEFER)) {
> - ret = -EPROBE_DEFER;
> - goto fail;
> - }
> - if (!IS_ERR(pcie->clk_reg)) {
> - ret = clk_prepare_enable(pcie->clk_reg);
> - if (ret)
> - goto fail_clkreg;
> + return dev_err_probe(dev, PTR_ERR(pcie->clk),
> + "could not enable clk\n");
> +
> + pcie->clk_reg = devm_clk_get_enabled(dev, "reg");
> + if (IS_ERR(pcie->clk_reg)) {
> + ret = dev_err_probe(dev, PTR_ERR(pcie->clk_reg),
> + "could not enable reg clk\n");
> + if (ret == -EPROBE_DEFER)
> + goto out;
You can drop this check as dev_err_probe handle this inside
It will defer the enabling of clock.
> }
>
> /* Get the dw-pcie unit configuration/control registers base. */
> @@ -308,12 +302,12 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
> pci->dbi_base = devm_pci_remap_cfg_resource(dev, base);
> if (IS_ERR(pci->dbi_base)) {
> ret = PTR_ERR(pci->dbi_base);
> - goto fail_clkreg;
> + goto out;
> }
>
> ret = armada8k_pcie_setup_phys(pcie);
> if (ret)
> - goto fail_clkreg;
> + goto out;
>
> platform_set_drvdata(pdev, pcie);
>
> @@ -325,11 +319,7 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>
> disable_phy:
> armada8k_pcie_disable_phys(pcie);
> -fail_clkreg:
> - clk_disable_unprepare(pcie->clk_reg);
> -fail:
> - clk_disable_unprepare(pcie->clk);
> -
> +out:
> return ret;
> }
>
Thanks
-Anand
> --
> 2.25.1
>
>
Powered by blists - more mailing lists