lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
 <PN3P287MB1829E68257FC17F8ADA725028B942@PN3P287MB1829.INDP287.PROD.OUTLOOK.COM>
Date: Tue, 27 Aug 2024 11:16:02 +0000
From: Tarang Raval <tarang.raval@...iconsignals.io>
To: Marc Kleine-Budde <mkl@...gutronix.de>
CC: "shawnguo@...nel.org" <shawnguo@...nel.org>, "krzk+dt@...nel.org"
	<krzk+dt@...nel.org>, "festevam@...il.com" <festevam@...il.com>, Rob Herring
	<robh@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>, Sascha Hauer
	<s.hauer@...gutronix.de>, "linux-kernel@...r.kernel.org"
	<linux-kernel@...r.kernel.org>, Pengutronix Kernel Team
	<kernel@...gutronix.de>, "imx@...ts.linux.dev" <imx@...ts.linux.dev>,
	"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals
 Support

Hi Marc,

Yes, I have tested it, and you can see the logs below.

After running  ifconfig can0 up, the bus is operational.

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.10.0-dirty (falcon@...con) (aarch64-poky-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1.20210209) #8 SMP PRE4
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] Machine model: Emtop Embedded Solutions i.MX8M Mini Baseboard V1
[    0.000000] efi: UEFI not found.
[    0.000000] OF: reserved mem: 0x00000000be000000..0x00000000bfbfffff (28672 KiB) nomap non-reusable optee_core@...e000000
[    0.000000] OF: reserved mem: 0x00000000bfc00000..0x00000000bfffffff (4096 KiB) nomap non-reusable optee_shm@...fc00000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xbdbe39c0-0xbdbe5fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bdffffff]
[    0.000000] On node 0, zone DMA: 8192 pages in unavailable ranges
[    0.000000] cma: Reserved 32 MiB at 0x00000000b9a00000 on node -1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 24 pages/cpu s59880 r8192 d30232 u98304
[    0.000000] pcpu-alloc: s59880 r8192 d30232 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk2p2 rootwait rw audit=0
[    0.000000] audit: disabled (until reboot)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
[    0.000000] Policy zone: DMA
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000b9500000-0x00000000b9700000] (2MB)
[    0.000000] Memory: 1941312K/2064384K available (18432K kernel code, 4936K rwdata, 12096K rodata, 10368K init, 761K bss, 90304K reserved, 3276)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 128 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
[    0.000000] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
[    0.001259] Console: colour dummy device 80x25
[    0.001329] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
[    0.001340] pid_max: default: 32768 minimum: 301
[    0.001407] LSM: initializing lsm=capability
[    0.001487] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001500] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.003270] rcu: Hierarchical SRCU implementation.
[    0.003280] rcu:     Max phase no-delay instances is 1000.
[    0.005746] EFI services will not be available.
[    0.005943] smp: Bringing up secondary CPUs ...
[    0.006381] Detected VIPT I-cache on CPU1
[    0.006448] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
[    0.006485] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.007018] Detected VIPT I-cache on CPU2
[    0.007068] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
[    0.007093] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.007565] Detected VIPT I-cache on CPU3
[    0.007612] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
[    0.007636] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.007731] smp: Brought up 1 node, 4 CPUs
[    0.007738] SMP: Total of 4 processors activated.
[    0.007742] CPU: All CPU(s) started at EL2
[    0.007761] CPU features: detected: 32-bit EL0 Support
[    0.007764] CPU features: detected: 32-bit EL1 Support
[    0.007769] CPU features: detected: CRC32 instructions
[    0.007806] alternatives: applying system-wide alternatives
[    0.009753] devtmpfs: initialized
[    0.016564] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.016589] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.017481] 21072 pages in range for non-PLT usage
[    0.017495] 512592 pages in range for PLT usage
[    0.017704] pinctrl core: initialized pinctrl subsystem
[    0.019984] DMI not present or invalid.
[    0.022491] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.023668] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.024340] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.025196] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.026938] thermal_sys: Registered thermal governor 'step_wise'
[    0.026944] thermal_sys: Registered thermal governor 'power_allocator'
[    0.027031] cpuidle: using governor menu
[    0.027259] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.027348] ASID allocator initialised with 65536 entries
[    0.029691] Serial: AMBA PL011 UART driver
[    0.035145] platform soc@0: Fixed dependency cycle(s) with /soc@...us@...00000/efuse@...50000/unique-id@4
[    0.040657] imx8mm-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
[    0.041461] platform 30350000.efuse: Fixed dependency cycle(s) with /soc@...us@...00000/clock-controller@...80000
[    0.043104] platform 30350000.efuse: Fixed dependency cycle(s) with /soc@...us@...00000/clock-controller@...80000
[    0.043794] platform 30380000.clock-controller: Fixed dependency cycle(s) with /soc@...nterrupt-controller@...00000
[    0.057376] platform 32e40000.usb: Fixed dependency cycle(s) with /connector
[    0.057451] platform connector: Fixed dependency cycle(s) with /soc@...us@...00000/usb@...40000
[    0.059749] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.059761] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.059767] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.059772] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.059776] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.059780] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.059786] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.059790] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.060200] Demotion targets for Node 0: null
[    0.061621] ACPI: Interpreter disabled.
[    0.064491] iommu: Default domain type: Translated
[    0.064500] iommu: DMA domain TLB invalidation policy: strict mode
[    0.064825] SCSI subsystem initialized
[    0.064934] libata version 3.00 loaded.
[    0.065157] usbcore: registered new interface driver usbfs
[    0.065187] usbcore: registered new interface driver hub
[    0.065213] usbcore: registered new device driver usb
[    0.066511] pps_core: LinuxPPS API ver. 1 registered
[    0.066517] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it>
[    0.066529] PTP clock support registered
[    0.066676] EDAC MC: Ver: 3.0.0
[    0.067122] scmi_core: SCMI protocol bus registered
[    0.068216] FPGA manager framework
[    0.068314] Advanced Linux Sound Architecture Driver Initialized.
[    0.069541] vgaarb: loaded
[    0.069930] clocksource: Switched to clocksource arch_sys_counter
[    0.070138] VFS: Disk quotas dquot_6.6.0
[    0.070156] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.070379] pnp: PnP ACPI: disabled
[    0.076745] NET: Registered PF_INET protocol family
[    0.076885] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.078410] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.078436] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.078449] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.078597] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.078997] TCP: Hash tables configured (established 16384 bind 16384)
[    0.079088] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.079133] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.079283] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.079646] RPC: Registered named UNIX socket transport module.
[    0.079651] RPC: Registered udp transport module.
[    0.079654] RPC: Registered tcp transport module.
[    0.079657] RPC: Registered tcp-with-tls transport module.
[    0.079660] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.080810] PCI: CLS 0 bytes, default 64
[    0.084150] kvm [1]: nv: 477 coarse grained trap handlers
[    0.084469] kvm [1]: IPA Size Limit: 40 bits
[    0.087081] kvm [1]: GICv3: no GICV resource entry
[    0.087086] kvm [1]: disabling GICv2 emulation
[    0.087101] kvm [1]: GIC system register CPU interface enabled
[    0.087128] kvm [1]: vgic interrupt IRQ9
[    0.087148] kvm [1]: Hyp nVHE mode initialized successfully
[    0.088405] Initialise system trusted keyrings
[    0.088572] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[    0.088839] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.089052] NFS: Registering the id_resolver key type
[    0.089071] Key type id_resolver registered
[    0.089075] Key type id_legacy registered
[    0.089093] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.089098] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.089212] 9p: Installing v9fs 9p2000 file system support
[    0.141859] Key type asymmetric registered
[    0.141867] Asymmetric key parser 'x509' registered
[    0.141916] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.141931] io scheduler mq-deadline registered
[    0.141936] io scheduler kyber registered
[    0.141964] io scheduler bfq registered
[    0.188177] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.188199] imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware
[    0.191398] imx-sdma 302b0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.191423] imx-sdma 302b0000.dma-controller: external firmware not found, using ROM firmware
[    0.194024] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.194043] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware
[    0.195842] SoC: i.MX8MM revision 1.0
[    0.229395] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.233994] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 18, base_baud = 1500000) is a IMX
[    0.234041] printk: legacy console [ttymxc1] enabled
[    1.373900] msm_serial: driver initialized
[    1.378539] SuperH (H)SCI(F) driver initialized
[    1.383371] STM32 USART driver initialized
[    1.395897] loop: module loaded
[    1.400551] megasas: 07.727.03.00-rc1
[    1.413135] tun: Universal TUN/TAP device driver, 1.6
[    1.419603] thunder_xcv, ver 1.0
[    1.422883] thunder_bgx, ver 1.0
[    1.426140] nicpf, ver 1.0
[    1.430708] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    1.437948] hns3: Copyright (c) 2017 Huawei Corporation.
[    1.443319] hclge is initializing
[    1.446680] e1000: Intel(R) PRO/1000 Network Driver
[    1.451565] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.457339] e1000e: Intel(R) PRO/1000 Network Driver
[    1.462310] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.468260] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.473666] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.479270] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    1.485545] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.491929] sky2: driver version 1.30
[    1.497599] VFIO - User Level meta-driver version: 0.3
[    1.507024] usbcore: registered new interface driver usb-storage
[    1.517572] i2c_dev: i2c /dev entries driver
[    1.533792] sdhci: Secure Digital Host Controller Interface driver
[    1.540017] sdhci: Copyright(c) Pierre Ossman
[    1.545624] Synopsys Designware Multimedia Card Interface Driver
[    1.553116] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.563449] ledtrig-cpu: registered to indicate activity on CPUs
[    1.571934] usbcore: registered new interface driver usbhid
[    1.577534] usbhid: USB HID core driver
[    1.587453] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.594252] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA
[    1.598025] platform soc@0: Fixed dependency cycle(s) with /soc@...us@...00000/efuse@...50000
[    1.613810] optee: probing for conduit method.
[    1.618301] optee: revision 3.10 (b3914e54)
[    1.618595] optee: dynamic shared memory is enabled
[    1.628000] optee: initialized driver
[    1.645008] fsl-spdif-dai 30090000.spdif: failed to get RX Sample Rate kcontrol
[    1.655213] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[    1.656692] NET: Registered PF_LLC protocol family
[    1.663035] mmcblk2: mmc2:0001 TB2916 14.6 GiB
[    1.666596] NET: Registered PF_INET6 protocol family
[    1.672502]  mmcblk2: p1 p2
[    1.676934] Segment Routing with IPv6
[    1.680361] mmcblk2boot0: mmc2:0001 TB2916 4.00 MiB
[    1.682364] In-situ OAM (IOAM) with IPv6
[    1.688961] mmcblk2boot1: mmc2:0001 TB2916 4.00 MiB
[    1.691214] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.698289] mmcblk2rpmb: mmc2:0001 TB2916 4.00 MiB, chardev (234:0)
[    1.702407] NET: Registered PF_PACKET protocol family
[    1.713351] 9pnet: Installing 9P2000 support
[    1.717679] Key type dns_resolver registered
[    1.732850] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    1.741727] registered taskstats version 1
[    1.746063] Loading compiled-in X.509 certificates
[    1.759882] Demotion targets for Node 0: null
[    1.776979] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.787670] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.798264] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.809157] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.820089] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.833312] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus)
[    1.842919] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus)
[    1.853760] i2c i2c-0: IMX I2C adapter registered
[    1.854275] nxp-pca9450 0-0025: Read device id error
[    1.863722] rtc-ds1307 2-0032: power-on detected
[    1.869510] rtc-ds1307 2-0032: voltage drop detected
[    1.880478] rtc-ds1307 2-0032: registered as rtc0
[    1.891345] rtc-ds1307 2-0032: setting system clock to 2024-08-27T10:45:39 UTC (1724755539)
[    1.905522] wm8904 2-001a: revision A
[    1.941639] i2c i2c-2: IMX I2C adapter registered
[    1.948543] i2c i2c-3: IMX I2C adapter registered
[    1.958070] pps pps0: new PPS source ptp0
[    1.965416] fec 30be0000.ethernet: Invalid MAC address: 00:00:00:00:00:00
[    1.972260] fec 30be0000.ethernet: Using random MAC address: 8a:e8:90:b7:d4:2f
[    1.980747] mdio_bus 30be0000.ethernet-1: MDIO device at address 4 is missing.
[    1.988642] fec 30be0000.ethernet eth0: registered PHC device 0
[    1.996998] imx_usb 32e40000.usb: No over current polarity defined
[    2.010485] imx_usb 32e50000.usb: No over current polarity defined
[    2.020233] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    2.025145] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[    2.045936] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[    2.052273] hub 1-0:1.0: USB hub found
[    2.056057] hub 1-0:1.0: 1 port detected
[    2.069501] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
[    2.069855] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.083606] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.090069] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    2.097377] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.097945] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA
[    2.098010] clk: Disabling unused clocks
[    2.101709] PM: genpd: Disabling unused power domains
[    2.101778] ALSA device list:
[    2.101782]   #0: imx-spdif
[    2.106025] cfg80211: failed to load regulatory.db
[    2.106448] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[    2.266355] EXT4-fs (mmcblk2p2): warning: mounting fs with errors, running e2fsck is recommended
[    2.277093] EXT4-fs (mmcblk2p2): recovery complete
[    2.283024] EXT4-fs (mmcblk2p2): mounted filesystem 20364220-6e5e-45c8-bf64-7551b37d8c8d r/w with ordered data mode. Quota mode: none.
[    2.287078] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    2.295187] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.308798] devtmpfs: mounted
[    2.309735] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    2.314563] Freeing unused kernel memory: 10368K
[    2.320440] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[    2.325119] Run /sbin/init as init process
[    2.335547] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.ees,imx8mm-emtop-baseboard.bin failed with error -2
[    2.335575]   with arguments:
[    2.347655]     /sbin/init
[    2.347659]   with environment:
[    2.347662]     HOME=/
[    2.347665]     TERM=linux
[    2.467553] systemd[1]: systemd 243.2+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCR)
[    2.487372] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[    2.489677] systemd[1]: Detected architecture arm64.
[    2.497370] hub 1-1:1.0: USB hub found
[    2.505499] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  3 2019 19:47:25 version 7.45.184 (r712131 CY) FWID 01-b363c0a0
[    2.517873] hub 1-1:1.0: 4 ports detected
[    2.578353] systemd[1]: Set hostname to <imx8mmddr4evk>.
[    2.720063] EXT4-fs error (device mmcblk2p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 34: bad block bitmap checksum
[    2.787503] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run.
[    2.815727] systemd[1]: /lib/systemd/system/syslogd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/.
[    2.845890] systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/.
[    2.869152] systemd[1]: /lib/systemd/system/klogd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/kl.
[    5.989945] random: crng init done
[    5.995822] systemd[1]: Created slice system-getty.slice.
[    6.019025] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.042942] systemd[1]: Created slice User and Session Slice.
[    6.514702] EXT4-fs (mmcblk2p2): re-mounted 20364220-6e5e-45c8-bf64-7551b37d8c8d r/w. Quota mode: none.
[    6.762206] systemd-journald[118]: Received client request to flush runtime journal.
[    7.441591] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 2 mkt segment 2 supported-hw 0x4 0x4
[    7.533512] Error: Driver 'imx-sdma' is already registered, aborting...
[    7.638002] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc1
[    7.652039] Error: Driver 'imx-sdma' is already registered, aborting...
[    7.731186] imx8m-ddrc-devfreq 3d400000.memory-controller: failed to get OPP table
[    7.744440] mc: Linux media interface: v0.10
[    7.778371] debugfs: File 'Headphone Jack' in directory 'dapm' already present!
[    7.843477] videodev: Linux video capture interface: v2.00
[    7.968037] etnaviv etnaviv: bound 38000000.gpu (ops gpu_ops [etnaviv])
[    7.991117] hantro-vpu 38300000.video-codec: registered nxp,imx8mm-vpu-g1-dec as /dev/video0
[    7.994918] etnaviv etnaviv: bound 38008000.gpu (ops gpu_ops [etnaviv])
[    8.006631] etnaviv-gpu 38000000.gpu: model: GC600, revision: 4653
[    8.022053] etnaviv-gpu 38000000.gpu: Need to move linear window on MC1.0, disabling TS
[    8.024688] bluetooth: Unknown symbol crypto_ecdh_key_len (err -2)
[    8.032308] hantro-vpu 38310000.video-codec: registered nxp,imx8mq-vpu-g2-dec as /dev/video1
[    8.036846] bluetooth: Unknown symbol crypto_ecdh_encode_key (err -2)
[    8.036917] etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341
[    8.046269] [drm] Initialized etnaviv 1.4.0 20151214 for etnaviv on minor 0
[    8.244785] usbcore: registered new device driver onboard-usb-dev
[    8.445671] hub 1-1:1.0: USB hub found
[    8.462368] CAN device driver interface
[    8.473204] hub 1-1:1.0: 4 ports detected
[    8.527105] hub 1-1:1.0: USB hub found
[    8.542004] hub 1-1:1.0: 4 ports detected
[    8.562833] mcp251x spi1.0 can0: MCP2515 successfully initialized.
[    8.639860] fec 30be0000.ethernet eth0: Unable to connect to phy
[    8.708452] fec 30be0000.ethernet eth0: Unable to connect to phy

Regards,
Tarang

________________________________________
From: Marc Kleine-Budde <mkl@...gutronix.de>
Sent: Friday, August 23, 2024 6:06 PM
To: Tarang Raval <tarang.raval@...iconsignals.io>
Cc: shawnguo@...nel.org <shawnguo@...nel.org>; krzk+dt@...nel.org <krzk+dt@...nel.org>; festevam@...il.com <festevam@...il.com>; Rob Herring <robh@...nel.org>; Conor Dooley <conor+dt@...nel.org>; devicetree@...r.kernel.org <devicetree@...r.kernel.org>; Sascha Hauer <s.hauer@...gutronix.de>; linux-kernel@...r.kernel.org <linux-kernel@...r.kernel.org>; Pengutronix Kernel Team <kernel@...gutronix.de>; imx@...ts.linux.dev <imx@...ts.linux.dev>; linux-arm-kernel@...ts.infradead.org <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support
 
CAUTION: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ