lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <93955b6d-0ce1-42cb-ad18-a82e2e8cfca9@quicinc.com>
Date: Wed, 28 Aug 2024 09:41:02 +0530
From: AKASH KUMAR <quic_akakum@...cinc.com>
To: Thinh Nguyen <Thinh.Nguyen@...opsys.com>
CC: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jing Leng
	<jleng@...arella.com>, Felipe Balbi <balbi@...nel.org>,
        Jack Pham
	<quic_jackp@...cinc.com>,
        "kernel@...cinc.com" <kernel@...cinc.com>,
        "Wesley
 Cheng" <quic_wcheng@...cinc.com>,
        Laurent Pinchart
	<laurent.pinchart@...asonboard.com>,
        Daniel Scally
	<dan.scally@...asonboard.com>,
        Vijayavardhan Vennapusa
	<quic_vvreddy@...cinc.com>,
        Krishna Kurapati <quic_kriskura@...cinc.com>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] usb: dwc3: gadget: Fix TX FIFO size for HS ISOC endpoints

Hi Thinh,

On 8/28/2024 4:45 AM, Thinh Nguyen wrote:
> On Tue, Aug 27, 2024, Akash Kumar wrote:
>> Use 2K TX FIFO size for low-resolution UVC cameras to support the
>> maximum possible UVC instances. Restrict 2K TX FIFO size based on
>> the minimum maxburst required to run low-resolution UVC cameras.
>>
>> Signed-off-by: Akash Kumar <quic_akakum@...cinc.com>
>> ---
>>   drivers/usb/dwc3/gadget.c | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 89fc690fdf34..f342ccda6705 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -788,6 +788,10 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
>>   	     usb_endpoint_xfer_isoc(dep->endpoint.desc)) && DWC3_IP_IS(DWC31))
>>   		num_fifos = dwc->tx_fifo_resize_max_num;
>>   
>> +	if (dep->endpoint.maxburst <= 1 &&
>> +	    usb_endpoint_xfer_isoc(dep->endpoint.desc))
>> +		num_fifos = 2;
>> +
>>   	/* FIFO size for a single buffer */
>>   	fifo = dwc3_gadget_calc_tx_fifo_size(dwc, 1);
>>   
>> -- 
>> 2.17.1
>>
> These settings are starting to get too specific for each application.
> Can we find a better calculation?
>
> Perhaps something like this? (code not tested)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 9a18973ebc05..d54b08f92aea 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -908,15 +908,10 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
>   
>   	ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
>   
> -	if ((dep->endpoint.maxburst > 1 &&
> -	     usb_endpoint_xfer_bulk(dep->endpoint.desc)) ||
> +	if (usb_endpoint_xfer_bulk(dep->endpoint.desc) ||
>   	    usb_endpoint_xfer_isoc(dep->endpoint.desc))
> -		num_fifos = 3;
> -
> -	if (dep->endpoint.maxburst > 6 &&
> -	    (usb_endpoint_xfer_bulk(dep->endpoint.desc) ||
> -	     usb_endpoint_xfer_isoc(dep->endpoint.desc)) && DWC3_IP_IS(DWC31))
> -		num_fifos = dwc->tx_fifo_resize_max_num;
> +		num_fifos = min_t(unsigned int, dep->endpoint.maxburst + 1,
> +				  dwc->tx_fifo_resize_max_num);
>   
>   	/* FIFO size for a single buffer */
>   	fifo = dwc3_gadget_calc_tx_fifo_size(dwc, 1);
>
should be fine for me, as earlier there was no case handling for 
maxburst <= 1, by allocating fifo based on maxburst itself

should be a good solution and will work for all as they customize based 
on maxburst through init scripts, let me test and update.

Thanks,
Akash

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ