linux-kernel - Re: [PATCH v4 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240829192059.GF3493@vamoiridPC>
Date: Thu, 29 Aug 2024 21:20:59 +0200
From: Vasileios Amoiridis <vassilisamir@...il.com>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Vasileios Amoiridis <vassilisamir@...il.com>, jic23@...nel.org,
	lars@...afoo.de, robh@...nel.org, krzk+dt@...nel.org,
	conor+dt@...nel.org, ang.iglesiasg@...il.com,
	linus.walleij@...aro.org, biju.das.jz@...renesas.com,
	javier.carrasco.cruz@...il.com, semen.protsenko@...aro.org,
	579lpy@...il.com, ak@...klinger.de, linux-iio@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	christophe.jaillet@...adoo.fr
Subject: Re: [PATCH v4 7/7] iio: pressure: bmp280: Move bmp085 interrupt to
 new configuration

On Thu, Aug 29, 2024 at 03:42:01PM +0300, Andy Shevchenko wrote:
> On Wed, Aug 28, 2024 at 10:51:27PM +0200, Vasileios Amoiridis wrote:
> > This commit intends to add the old BMP085 sensor to the new IRQ interface
> > of the driver for consistence. No functional changes intended.
> > 
> > The BMP085 sensor is equivalent with the BMP180 with the only difference of
> > BMP085 having an extra interrupt pin to inform about an End of Conversion.
> 
> ...
> 
> > +static int bmp085_trigger_probe(struct iio_dev *indio_dev)
> >  {
> > +	struct bmp280_data *data = iio_priv(indio_dev);
> > +	struct device *dev = data->dev;
> >  	unsigned long irq_trig;
> > -	int ret;
> > +	int ret, irq;
> > +
> > +	irq = fwnode_irq_get(dev_fwnode(data->dev), 0);
> 
> You have dev, use it!

ACK.

> 
> > +	if (irq < 0)
> > +		return dev_err_probe(data->dev, irq, "No interrupt found.\n");
> 
> Ditto!
> 

ACK.

Thanks again Andy for the review, it's highly appreciated!!!

Cheers,
Vasilis

> -- 
> With Best Regards,
> Andy Shevchenko
> 
>