[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240830174633.GA559043-robh@kernel.org>
Date: Fri, 30 Aug 2024 12:46:33 -0500
From: Rob Herring <robh@...nel.org>
To: Claudiu <claudiu.beznea@...on.dev>
Cc: geert+renesas@...der.be, mturquette@...libre.com, sboyd@...nel.org,
krzk+dt@...nel.org, conor+dt@...nel.org,
alexandre.belloni@...tlin.com, magnus.damm@...il.com,
p.zabel@...gutronix.de, linux-renesas-soc@...r.kernel.org,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-rtc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb:
Document VBATTB
On Fri, Aug 30, 2024 at 04:02:07PM +0300, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>
> The VBATTB IP of the Renesas RZ/G3S SoC controls the clock for RTC,
> the tamper detector and a small general usage memory of 128B. Add
> documentation for it.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> ---
>
> Changes in v3:
> - moved the file to clock dt bindings directory as it is the
> only functionality supported at the moment; the other functionalities
> (tamper detector, SRAM) are offered though register spreaded
> though the address space of the VBATTB IP and not actually
> individual devices; the other functionalities are not
> planned to be supported soon and if they will be I think they
> fit better on auxiliary bus than MFD
> - dropped interrupt names as requested in the review process
> - dropped the inner node for clock controller
> - added #clock-cells
> - added rtx clock
> - updated description for renesas,vbattb-load-nanofarads
> - included dt-bindings/interrupt-controller/irq.h in examples section
>
> Changes in v2:
> - changed file name and compatible
> - updated title, description sections
> - added clock controller part documentation and drop dedicated file
> for it included in v1
> - used items to describe interrupts, interrupt-names, clocks, clock-names,
> resets
> - dropped node labels and status
> - updated clock-names for clock controller to cope with the new
> logic on detecting the necessity to setup bypass
>
> .../clock/renesas,r9a08g045-vbattb.yaml | 81 +++++++++++++++++++
> 1 file changed, 81 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml
> new file mode 100644
> index 000000000000..29df0e01fae5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/renesas,r9a08g045-vbattb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas Battery Backup Function (VBATTB)
> +
> +description:
> + Renesas VBATTB is an always on powered module (backed by battery) which
> + controls the RTC clock (VBATTCLK), tamper detection logic and a small
> + general usage memory (128B).
> +
> +maintainers:
> + - Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> +
> +properties:
> + compatible:
> + const: renesas,r9a08g045-vbattb
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + items:
> + - description: tamper detector interrupt
> +
> + clocks:
> + items:
> + - description: VBATTB module clock
> + - description: RTC input clock (crystal oscillator or external clock device)
> +
> + clock-names:
> + items:
> + - const: bclk
> + - const: rtx
> +
> + '#clock-cells':
> + const: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + items:
> + - description: VBATTB module reset
> +
> + renesas,vbattb-load-nanofarads:
Use defined units, don't add your own. So -picofarads should work for
you.
> + description: load capacitance of the on board crystal oscillator
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 4000, 7000, 9000, 12500 ]
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - '#clock-cells'
> + - power-domains
> + - resets
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/r9a08g045-cpg.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + vbattb@...5c000 {
clock-controller@...
> + compatible = "renesas,r9a08g045-vbattb";
> + reg = <0x1005c000 0x1000>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattb_xtal>;
> + clock-names = "bclk", "rtx";
> + #clock-cells = <1>;
> + power-domains = <&cpg>;
> + resets = <&cpg R9A08G045_VBAT_BRESETN>;
> + renesas,vbattb-load-nanofarads = <12500>;
> + };
> --
> 2.39.2
>
Powered by blists - more mailing lists