| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CABN1KC+L=ag088FO5HxdbR4a_S5XNt3ipJ_0hq19jVPHw+fM6w@mail.gmail.com>
Date: Fri, 30 Aug 2024 15:51:57 -0700
From: David Dai <davidai@...gle.com>
To: Saravana Kannan <saravanak@...gle.com>
Cc: "Rafael J. Wysocki" <rafael@...nel.org>, Viresh Kumar <viresh.kumar@...aro.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Sudeep Holla <sudeep.holla@....com>, Quentin Perret <qperret@...gle.com>,
Masami Hiramatsu <mhiramat@...gle.com>, Will Deacon <will@...nel.org>,
Peter Zijlstra <peterz@...radead.org>, Vincent Guittot <vincent.guittot@...aro.org>,
Marc Zyngier <maz@...nel.org>, Oliver Upton <oliver.upton@...ux.dev>,
Dietmar Eggemann <dietmar.eggemann@....com>, Pavan Kondeti <quic_pkondeti@...cinc.com>,
Gupta Pankaj <pankaj.gupta@....com>, Mel Gorman <mgorman@...e.de>, kernel-team@...roid.com,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 2/2] cpufreq: add virtual-cpufreq driver
On Tue, Jul 9, 2024 at 5:08 PM Saravana Kannan <saravanak@...gle.com> wrote:
>
> On Fri, Jun 28, 2024 at 5:01 AM Rafael J. Wysocki <rafael@...nel.org> wrote:
> >
> > Hi,
> >
> > On Thu, Jun 27, 2024 at 11:22 PM David Dai <davidai@...gle.com> wrote:
> > >
> > > Hi folks,
> > >
> > > Gentle nudge on this patch to see if there's any remaining concerns?
> >
> > Yes, there are.
> >
> > The dependency of OF is pretty much a no-go from my perspective.
>
> If you are talking about the "depends on OF" I think that can and
> should be dropped.
>
> There's nothing really OF specific about this driver except the probe
> function being for a platform device/driver. We can easily write an
> ACPI driver variant of the probe function and have the same driver
> work for both OF and ACPI versions of the device. We don't have any
> ACPI experience or a test set up to test the ACPI variant. That's why
> we haven't added it. We are more than happy to accept tested patches
> on top of this that'll enable this for ACPI variants too.
>
> If we drop the "depends on OF", will you accept this patch? If not,
> can you give some guidance on what you are looking for?
Hi Rafael,
Just wanted to follow up and see what your thoughts are on this?
Thanks,
David
>
> Thanks,
> Saravana
>
>
>
>
> >
> > Thanks!
> >
> >
> > > On Mon, May 20, 2024 at 10:32 PM David Dai <davidai@...gle.com> wrote:
> > > >
> > > > Introduce a virtualized cpufreq driver for guest kernels to improve
> > > > performance and power of workloads within VMs.
> > > >
> > > > This driver does two main things:
> > > >
> > > > 1. Sends the frequency of vCPUs as a hint to the host. The host uses the
> > > > hint to schedule the vCPU threads and decide physical CPU frequency.
> > > >
> > > > 2. If a VM does not support a virtualized FIE(like AMUs), it queries the
> > > > host CPU frequency by reading a MMIO region of a virtual cpufreq device
> > > > to update the guest's frequency scaling factor periodically. This enables
> > > > accurate Per-Entity Load Tracking for tasks running in the guest.
> > > >
> > > > Co-developed-by: Saravana Kannan <saravanak@...gle.com>
> > > > Signed-off-by: Saravana Kannan <saravanak@...gle.com>
> > > > Signed-off-by: David Dai <davidai@...gle.com>
> > > > ---
> > > > drivers/cpufreq/Kconfig | 14 ++
> > > > drivers/cpufreq/Makefile | 1 +
> > > > drivers/cpufreq/virtual-cpufreq.c | 335 ++++++++++++++++++++++++++++++
> > > > include/linux/arch_topology.h | 1 +
> > > > 4 files changed, 351 insertions(+)
> > > > create mode 100644 drivers/cpufreq/virtual-cpufreq.c
> > > >
> > > > diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
> > > > index 94e55c40970a..9aa86bec5793 100644
> > > > --- a/drivers/cpufreq/Kconfig
> > > > +++ b/drivers/cpufreq/Kconfig
> > > > @@ -217,6 +217,20 @@ config CPUFREQ_DT
> > > >
> > > > If in doubt, say N.
> > > >
> > > > +config CPUFREQ_VIRT
> > > > + tristate "Virtual cpufreq driver"
> > > > + depends on OF && GENERIC_ARCH_TOPOLOGY
> > > > + help
> > > > + This adds a virtualized cpufreq driver for guest kernels that
> > > > + read/writes to a MMIO region for a virtualized cpufreq device to
> > > > + communicate with the host. It sends performance requests to the host
> > > > + which gets used as a hint to schedule vCPU threads and select CPU
> > > > + frequency. If a VM does not support a virtualized FIE such as AMUs,
> > > > + it updates the frequency scaling factor by polling host CPU frequency
> > > > + to enable accurate Per-Entity Load Tracking for tasks running in the guest.
> > > > +
> > > > + If in doubt, say N.
> > > > +
> > > > config CPUFREQ_DT_PLATDEV
> > > > tristate "Generic DT based cpufreq platdev driver"
> > > > depends on OF
> > > > diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> > > > index 8d141c71b016..eb72ecdc24db 100644
> > > > --- a/drivers/cpufreq/Makefile
> > > > +++ b/drivers/cpufreq/Makefile
> > > > @@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o
> > > >
> > > > obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
> > > > obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o
> > > > +obj-$(CONFIG_CPUFREQ_VIRT) += virtual-cpufreq.o
> > > >
> > > > # Traces
> > > > CFLAGS_amd-pstate-trace.o := -I$(src)
> > > > diff --git a/drivers/cpufreq/virtual-cpufreq.c b/drivers/cpufreq/virtual-cpufreq.c
> > > > new file mode 100644
> > > > index 000000000000..59ce2bda3913
> > > > --- /dev/null
> > > > +++ b/drivers/cpufreq/virtual-cpufreq.c
> > > > @@ -0,0 +1,335 @@
> > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > +/*
> > > > + * Copyright (C) 2024 Google LLC
> > > > + */
> > > > +
> > > > +#include <linux/arch_topology.h>
> > > > +#include <linux/cpufreq.h>
> > > > +#include <linux/init.h>
> > > > +#include <linux/sched.h>
> > > > +#include <linux/kernel.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of_address.h>
> > > > +#include <linux/of_platform.h>
> > > > +#include <linux/platform_device.h>
> > > > +#include <linux/slab.h>
> > > > +
> > > > +/*
> > > > + * CPU0..CPUn
> > > > + * +-------------+-------------------------------+--------+-------+
> > > > + * | Register | Description | Offset | Len |
> > > > + * +-------------+-------------------------------+--------+-------+
> > > > + * | cur_perf | read this register to get | 0x0 | 0x4 |
> > > > + * | | the current perf (integer val | | |
> > > > + * | | representing perf relative to | | |
> > > > + * | | max performance) | | |
> > > > + * | | that vCPU is running at | | |
> > > > + * +-------------+-------------------------------+--------+-------+
> > > > + * | set_perf | write to this register to set | 0x4 | 0x4 |
> > > > + * | | perf value of the vCPU | | |
> > > > + * +-------------+-------------------------------+--------+-------+
> > > > + * | perftbl_len | number of entries in perf | 0x8 | 0x4 |
> > > > + * | | table. A single entry in the | | |
> > > > + * | | perf table denotes no table | | |
> > > > + * | | and the entry contains | | |
> > > > + * | | the maximum perf value | | |
> > > > + * | | that this vCPU supports. | | |
> > > > + * | | The guest can request any | | |
> > > > + * | | value between 1 and max perf | | |
> > > > + * | | when perftbls are not used. | | |
> > > > + * +---------------------------------------------+--------+-------+
> > > > + * | perftbl_sel | write to this register to | 0xc | 0x4 |
> > > > + * | | select perf table entry to | | |
> > > > + * | | read from | | |
> > > > + * +---------------------------------------------+--------+-------+
> > > > + * | perftbl_rd | read this register to get | 0x10 | 0x4 |
> > > > + * | | perf value of the selected | | |
> > > > + * | | entry based on perftbl_sel | | |
> > > > + * +---------------------------------------------+--------+-------+
> > > > + * | perf_domain | performance domain number | 0x14 | 0x4 |
> > > > + * | | that this vCPU belongs to. | | |
> > > > + * | | vCPUs sharing the same perf | | |
> > > > + * | | domain number are part of the | | |
> > > > + * | | same performance domain. | | |
> > > > + * +-------------+-------------------------------+--------+-------+
> > > > + */
> > > > +
> > > > +#define REG_CUR_PERF_STATE_OFFSET 0x0
> > > > +#define REG_SET_PERF_STATE_OFFSET 0x4
> > > > +#define REG_PERFTBL_LEN_OFFSET 0x8
> > > > +#define REG_PERFTBL_SEL_OFFSET 0xc
> > > > +#define REG_PERFTBL_RD_OFFSET 0x10
> > > > +#define REG_PERF_DOMAIN_OFFSET 0x14
> > > > +#define PER_CPU_OFFSET 0x1000
> > > > +
> > > > +#define PERFTBL_MAX_ENTRIES 64U
> > > > +
> > > > +static void __iomem *base;
> > > > +static DEFINE_PER_CPU(u32, perftbl_num_entries);
> > > > +
> > > > +static void virt_scale_freq_tick(void)
> > > > +{
> > > > + int cpu = smp_processor_id();
> > > > + u32 max_freq = (u32)cpufreq_get_hw_max_freq(cpu);
> > > > + u64 cur_freq;
> > > > + unsigned long scale;
> > > > +
> > > > + cur_freq = (u64)readl_relaxed(base + cpu * PER_CPU_OFFSET
> > > > + + REG_CUR_PERF_STATE_OFFSET);
> > > > +
> > > > + cur_freq <<= SCHED_CAPACITY_SHIFT;
> > > > + scale = (unsigned long)div_u64(cur_freq, max_freq);
> > > > + scale = min(scale, SCHED_CAPACITY_SCALE);
> > > > +
> > > > + this_cpu_write(arch_freq_scale, scale);
> > > > +}
> > > > +
> > > > +static struct scale_freq_data virt_sfd = {
> > > > + .source = SCALE_FREQ_SOURCE_VIRT,
> > > > + .set_freq_scale = virt_scale_freq_tick,
> > > > +};
> > > > +
> > > > +static unsigned int virt_cpufreq_set_perf(struct cpufreq_policy *policy,
> > > > + unsigned int target_freq)
> > > > +{
> > > > + writel_relaxed(target_freq,
> > > > + base + policy->cpu * PER_CPU_OFFSET + REG_SET_PERF_STATE_OFFSET);
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static unsigned int virt_cpufreq_fast_switch(struct cpufreq_policy *policy,
> > > > + unsigned int target_freq)
> > > > +{
> > > > + virt_cpufreq_set_perf(policy, target_freq);
> > > > + return target_freq;
> > > > +}
> > > > +
> > > > +static u32 virt_cpufreq_get_perftbl_entry(int cpu, u32 idx)
> > > > +{
> > > > + writel_relaxed(idx, base + cpu * PER_CPU_OFFSET +
> > > > + REG_PERFTBL_SEL_OFFSET);
> > > > + return readl_relaxed(base + cpu * PER_CPU_OFFSET +
> > > > + REG_PERFTBL_RD_OFFSET);
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_target(struct cpufreq_policy *policy,
> > > > + unsigned int target_freq,
> > > > + unsigned int relation)
> > > > +{
> > > > + struct cpufreq_freqs freqs;
> > > > + int ret = 0;
> > > > +
> > > > + freqs.old = policy->cur;
> > > > + freqs.new = target_freq;
> > > > +
> > > > + cpufreq_freq_transition_begin(policy, &freqs);
> > > > + ret = virt_cpufreq_set_perf(policy, target_freq);
> > > > + cpufreq_freq_transition_end(policy, &freqs, ret != 0);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_get_sharing_cpus(struct cpufreq_policy *policy)
> > > > +{
> > > > + u32 cur_perf_domain, perf_domain;
> > > > + struct device *cpu_dev;
> > > > + int cpu;
> > > > +
> > > > + cur_perf_domain = readl_relaxed(base + policy->cpu *
> > > > + PER_CPU_OFFSET + REG_PERF_DOMAIN_OFFSET);
> > > > +
> > > > + for_each_possible_cpu(cpu) {
> > > > + cpu_dev = get_cpu_device(cpu);
> > > > + if (!cpu_dev)
> > > > + continue;
> > > > +
> > > > + perf_domain = readl_relaxed(base + cpu *
> > > > + PER_CPU_OFFSET + REG_PERF_DOMAIN_OFFSET);
> > > > +
> > > > + if (perf_domain == cur_perf_domain)
> > > > + cpumask_set_cpu(cpu, policy->cpus);
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_get_freq_info(struct cpufreq_policy *policy)
> > > > +{
> > > > + struct cpufreq_frequency_table *table;
> > > > + u32 num_perftbl_entries, idx;
> > > > +
> > > > + num_perftbl_entries = per_cpu(perftbl_num_entries, policy->cpu);
> > > > +
> > > > + if (num_perftbl_entries == 1) {
> > > > + policy->cpuinfo.min_freq = 1;
> > > > + policy->cpuinfo.max_freq = virt_cpufreq_get_perftbl_entry(policy->cpu, 0);
> > > > +
> > > > + policy->min = policy->cpuinfo.min_freq;
> > > > + policy->max = policy->cpuinfo.max_freq;
> > > > +
> > > > + policy->cur = policy->max;
> > > > + return 0;
> > > > + }
> > > > +
> > > > + table = kcalloc(num_perftbl_entries + 1, sizeof(*table), GFP_KERNEL);
> > > > + if (!table)
> > > > + return -ENOMEM;
> > > > +
> > > > + for (idx = 0; idx < num_perftbl_entries; idx++)
> > > > + table[idx].frequency = virt_cpufreq_get_perftbl_entry(policy->cpu, idx);
> > > > +
> > > > + table[idx].frequency = CPUFREQ_TABLE_END;
> > > > + policy->freq_table = table;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_cpu_init(struct cpufreq_policy *policy)
> > > > +{
> > > > + struct device *cpu_dev;
> > > > + int ret;
> > > > +
> > > > + cpu_dev = get_cpu_device(policy->cpu);
> > > > + if (!cpu_dev)
> > > > + return -ENODEV;
> > > > +
> > > > + ret = virt_cpufreq_get_freq_info(policy);
> > > > + if (ret) {
> > > > + dev_warn(cpu_dev, "failed to get cpufreq info\n");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + ret = virt_cpufreq_get_sharing_cpus(policy);
> > > > + if (ret) {
> > > > + dev_warn(cpu_dev, "failed to get sharing cpumask\n");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + /*
> > > > + * To simplify and improve latency of handling frequency requests on
> > > > + * the host side, this ensures that the vCPU thread triggering the MMIO
> > > > + * abort is the same thread whose performance constraints (Ex. uclamp
> > > > + * settings) need to be updated. This simplifies the VMM (Virtual
> > > > + * Machine Manager) having to find the correct vCPU thread and/or
> > > > + * facing permission issues when configuring other threads.
> > > > + */
> > > > + policy->dvfs_possible_from_any_cpu = false;
> > > > + policy->fast_switch_possible = true;
> > > > +
> > > > + /*
> > > > + * Using the default SCALE_FREQ_SOURCE_CPUFREQ is insufficient since
> > > > + * the actual physical CPU frequency may not match requested frequency
> > > > + * from the vCPU thread due to frequency update latencies or other
> > > > + * inputs to the physical CPU frequency selection. This additional FIE
> > > > + * source allows for more accurate freq_scale updates and only takes
> > > > + * effect if another FIE source such as AMUs have not been registered.
> > > > + */
> > > > + topology_set_scale_freq_source(&virt_sfd, policy->cpus);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_cpu_exit(struct cpufreq_policy *policy)
> > > > +{
> > > > + topology_clear_scale_freq_source(SCALE_FREQ_SOURCE_VIRT, policy->related_cpus);
> > > > + kfree(policy->freq_table);
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_online(struct cpufreq_policy *policy)
> > > > +{
> > > > + /* Nothing to restore. */
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_offline(struct cpufreq_policy *policy)
> > > > +{
> > > > + /* Dummy offline() to avoid exit() being called and freeing resources. */
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_verify_policy(struct cpufreq_policy_data *policy)
> > > > +{
> > > > + if (policy->freq_table)
> > > > + return cpufreq_frequency_table_verify(policy, policy->freq_table);
> > > > +
> > > > + cpufreq_verify_within_cpu_limits(policy);
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static struct cpufreq_driver cpufreq_virt_driver = {
> > > > + .name = "virt-cpufreq",
> > > > + .init = virt_cpufreq_cpu_init,
> > > > + .exit = virt_cpufreq_cpu_exit,
> > > > + .online = virt_cpufreq_online,
> > > > + .offline = virt_cpufreq_offline,
> > > > + .verify = virt_cpufreq_verify_policy,
> > > > + .target = virt_cpufreq_target,
> > > > + .fast_switch = virt_cpufreq_fast_switch,
> > > > + .attr = cpufreq_generic_attr,
> > > > +};
> > > > +
> > > > +static int virt_cpufreq_driver_probe(struct platform_device *pdev)
> > > > +{
> > > > + u32 num_perftbl_entries;
> > > > + int ret, cpu;
> > > > +
> > > > + base = devm_platform_ioremap_resource(pdev, 0);
> > > > + if (IS_ERR(base))
> > > > + return PTR_ERR(base);
> > > > +
> > > > + for_each_possible_cpu(cpu) {
> > > > + num_perftbl_entries = readl_relaxed(base + cpu * PER_CPU_OFFSET +
> > > > + REG_PERFTBL_LEN_OFFSET);
> > > > +
> > > > + if (!num_perftbl_entries || num_perftbl_entries > PERFTBL_MAX_ENTRIES)
> > > > + return -ENODEV;
> > > > +
> > > > + per_cpu(perftbl_num_entries, cpu) = num_perftbl_entries;
> > > > + }
> > > > +
> > > > + ret = cpufreq_register_driver(&cpufreq_virt_driver);
> > > > + if (ret) {
> > > > + dev_err(&pdev->dev, "Virtual CPUFreq driver failed to register: %d\n", ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > + dev_dbg(&pdev->dev, "Virtual CPUFreq driver initialized\n");
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int virt_cpufreq_driver_remove(struct platform_device *pdev)
> > > > +{
> > > > + cpufreq_unregister_driver(&cpufreq_virt_driver);
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct of_device_id virt_cpufreq_match[] = {
> > > > + { .compatible = "qemu,virtual-cpufreq", .data = NULL},
> > > > + {}
> > > > +};
> > > > +MODULE_DEVICE_TABLE(of, virt_cpufreq_match);
> > > > +
> > > > +static struct platform_driver virt_cpufreq_driver = {
> > > > + .probe = virt_cpufreq_driver_probe,
> > > > + .remove = virt_cpufreq_driver_remove,
> > > > + .driver = {
> > > > + .name = "virt-cpufreq",
> > > > + .of_match_table = virt_cpufreq_match,
> > > > + },
> > > > +};
> > > > +
> > > > +static int __init virt_cpufreq_init(void)
> > > > +{
> > > > + return platform_driver_register(&virt_cpufreq_driver);
> > > > +}
> > > > +postcore_initcall(virt_cpufreq_init);
> > > > +
> > > > +static void __exit virt_cpufreq_exit(void)
> > > > +{
> > > > + platform_driver_unregister(&virt_cpufreq_driver);
> > > > +}
> > > > +module_exit(virt_cpufreq_exit);
> > > > +
> > > > +MODULE_DESCRIPTION("Virtual cpufreq driver");
> > > > +MODULE_LICENSE("GPL");
> > > > diff --git a/include/linux/arch_topology.h b/include/linux/arch_topology.h
> > > > index b721f360d759..d5d848849408 100644
> > > > --- a/include/linux/arch_topology.h
> > > > +++ b/include/linux/arch_topology.h
> > > > @@ -49,6 +49,7 @@ enum scale_freq_source {
> > > > SCALE_FREQ_SOURCE_CPUFREQ = 0,
> > > > SCALE_FREQ_SOURCE_ARCH,
> > > > SCALE_FREQ_SOURCE_CPPC,
> > > > + SCALE_FREQ_SOURCE_VIRT,
> > > > };
> > > >
> > > > struct scale_freq_data {
> > > > --
> > > > 2.45.0.215.g3402c0e53f-goog
> > > >
> > >
Powered by blists - more mailing lists