[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<PA4PR04MB963862022F22E473CD559310D1972@PA4PR04MB9638.eurprd04.prod.outlook.com>
Date: Fri, 30 Aug 2024 10:58:50 +0000
From: David Lin <yu-hao.lin@....com>
To: Sascha Hauer <s.hauer@...gutronix.de>, Francesco Dolcini
<francesco@...cini.it>
CC: "linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"briannorris@...omium.org" <briannorris@...omium.org>, "kvalo@...nel.org"
<kvalo@...nel.org>, Pete Hsieh <tsung-hsien.hsieh@....com>
Subject: RE: [EXT] Re: [PATCH] wifi: mwifiex: avoid AP and STA running on
different channel
> From: Sascha Hauer <s.hauer@...gutronix.de>
> Sent: Friday, August 30, 2024 5:19 PM
> To: Francesco Dolcini <francesco@...cini.it>
> Cc: David Lin <yu-hao.lin@....com>; linux-wireless@...r.kernel.org;
> linux-kernel@...r.kernel.org; briannorris@...omium.org; kvalo@...nel.org;
> Pete Hsieh <tsung-hsien.hsieh@....com>
> Subject: [EXT] Re: [PATCH] wifi: mwifiex: avoid AP and STA running on
> different channel
>
> On Fri, Aug 30, 2024 at 10:10:30AM +0200, Francesco Dolcini wrote:
> > +Sascha, that just sent a patch to handle the same issue.
> >
> > On Fri, Aug 30, 2024 at 11:06:30AM +0800, David Lin wrote:
> > > Current firmware doesn't support AP and STA running on different
> > > channels simultaneously.
> > > FW crash would occur in such case.
> > > This patch avoids the issue by disabling AP and STA to run on
> > > different channels.
> >
> > Is this a generic issue of specific of some firmware version? Asking
> > since the driver as you know is supporting multiple Wi-Fi device.
>
> The driver does, unfortunately the hardware does not.
>
> I learned this the hard way. When an accesspoint is running on uap0 and
> you want to connect to an accesspoint on mlan0 then it won't work when
> that accesspoint is on a different channel.
>
> Likewise, when you are creating an accesspoint on uap0 using channel A and
> another one on channel B then you'll notice that both accesspoints will end
> up using channel A.
>
> It took me a while to find that out. In the end I found the same channel
> check in the nxpwifi driver.
>
> Sascha
>
Yes, this patch is backported from nxpwifi (same as another patch for AP DFS mode).
Because Mwifiex supports connect/disconnect and separate auth/assoc, I think I will
clean up the code and create patch v2 later.
David
Powered by blists - more mailing lists