| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240830113347.4048370-2-ciprianmarian.costea@oss.nxp.com>
Date: Fri, 30 Aug 2024 14:33:46 +0300
From: Ciprian Costea <ciprianmarian.costea@....nxp.com>
To: Chester Lin <chester62515@...il.com>,
Matthias Brugger <mbrugger@...e.com>,
Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Pengutronix Kernel Team <kernel@...gutronix.de>,
linux-arm-kernel@...ts.infradead.org,
imx@...ts.linux.dev,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
NXP S32 Linux Team <s32@....com>,
Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>,
Radu Pirea <radu-nicolae.pirea@....com>
Subject: [PATCH v2 1/2] arm64: dts: s32g: Add S32G2/S32G3 uSDHC pinmux
From: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
Adding 100mhz & 200mhz pinmux support for uSDHC helps to enable
higher speed modes for SD (SDR50, DDR50, SDR104) and
eMMC (such as HS200, HS400/HS400ES).
Signed-off-by: Radu Pirea <radu-nicolae.pirea@....com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
---
arch/arm64/boot/dts/freescale/s32g2.dtsi | 153 ++++++++++++++++++
.../arm64/boot/dts/freescale/s32g274a-evb.dts | 4 +
.../boot/dts/freescale/s32g274a-rdb2.dts | 4 +
arch/arm64/boot/dts/freescale/s32g3.dtsi | 153 ++++++++++++++++++
.../boot/dts/freescale/s32g399a-rdb3.dts | 4 +
5 files changed, 318 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index fa054bfe7d5c..7be430b78c83 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -162,6 +162,159 @@ jtag-grp4 {
slew-rate = <166>;
};
};
+
+ pinctrl_usdhc0: usdhc0grp-pins {
+ usdhc0-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+ usdhc0-100mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+ usdhc0-200mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
};
uart0: serial@...c8000 {
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
index dbe498798bd9..7ab917f547ef 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
@@ -34,6 +34,10 @@ &uart0 {
};
&usdhc0 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
disable-wp;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
index ab1e5caaeae7..8739f63771bc 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -40,6 +40,10 @@ &uart1 {
};
&usdhc0 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
disable-wp;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index b4226a9143c8..6c572ffe37ca 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -219,6 +219,159 @@ jtag-grp4 {
slew-rate = <166>;
};
};
+
+ pinctrl_usdhc0: usdhc0grp-pins {
+ usdhc0-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+ usdhc0-100mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+ usdhc0-200mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
};
uart0: serial@...c8000 {
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
index 176e5af191c8..828e353455b5 100644
--- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
+++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
@@ -40,6 +40,10 @@ &uart1 {
};
&usdhc0 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
bus-width = <8>;
disable-wp;
status = "okay";
--
2.45.2
Powered by blists - more mailing lists