[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240904-qcs8300_initial_dtsi-v1-0-d0ea9afdc007@quicinc.com>
Date: Wed, 4 Sep 2024 16:33:41 +0800
From: Jingyi Wang <quic_jingyw@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Mathieu Poirier
<mathieu.poirier@...aro.org>,
Rob Herring <robh@...nel.org>,
"Krzysztof
Kozlowski" <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
"Bartosz
Golaszewski" <bartosz.golaszewski@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Manivannan Sadhasivam
<manivannan.sadhasivam@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
Bart Van Assche <bvanassche@....org>, "Andy Gross" <agross@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
"Thomas Gleixner" <tglx@...utronix.de>, Will Deacon <will@...nel.org>,
Robin
Murphy <robin.murphy@....com>, Joerg Roedel <joro@...tes.org>,
Konrad Dybcio
<konradybcio@...nel.org>,
Robert Marko <robimarko@...il.com>,
Das Srinagesh
<quic_gurus@...cinc.com>,
Jassi Brar <jassisinghbrar@...il.com>, Lee Jones
<lee@...nel.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Catalin Marinas <catalin.marinas@....com>
CC: <linux-arm-msm@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-phy@...ts.infradead.org>, <linux-scsi@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<iommu@...ts.linux.dev>, Jingyi Wang <quic_jingyw@...cinc.com>,
Xin Liu
<quic_liuxin@...cinc.com>,
Shazad Hussain <quic_shazhuss@...cinc.com>,
Tingguo Cheng <quic_tingguoc@...cinc.com>,
Zhenhua Huang
<quic_zhenhuah@...cinc.com>,
Kyle Deng <quic_chunkaid@...cinc.com>,
"Raviteja
Laggyshetty" <quic_rlaggysh@...cinc.com>
Subject: [PATCH 00/19] Add initial support for QCS8300
Add initial support for QCS8300 SoC and QCS8300 RIDE board.
This revision brings support for:
- CPUs with cpu idle
- interrupt-controller with PDC wakeup support
- gcc
- TLMM
- interconnect
- qup with uart
- smmu
- pmic
- ufs
- ipcc
- sram
- remoteprocs including ADSP,CDSP and GPDSP
Signed-off-by: Jingyi Wang <quic_jingyw@...cinc.com>
---
patch series organized as:
- 1-2: remoteproc binding and driver
- 3-5: ufs binding and driver
- 6-7: rpmhpd binding and driver
- 8-15: bindings for other components found on the SoC
- 16-19: changes to support the device tree
dependencies:
tlmm: https://lore.kernel.org/linux-arm-msm/20240819064933.1778204-1-quic_jingyw@quicinc.com/
gcc: https://lore.kernel.org/all/20240820-qcs8300-gcc-v1-0-d81720517a82@quicinc.com/
interconnect: https://lore.kernel.org/linux-arm-msm/20240827151622.305-1-quic_rlaggysh@quicinc.com/
dtb check got following err:
/local/mnt/workspace/jingyi/aim500/linux/arch/arm64/boot/dts/qcom/qcs8300-ride.dtb: interconnect@...0000: Unevaluated properties are not allowed ('reg' was unexpected)
which is cause by "reg" compatible missing in dt binding, will be fixed in interconnect patch series.
---
Jingyi Wang (11):
dt-bindings: remoteproc: qcom,sa8775p-pas: Document QCS8300 remoteproc
remoteproc: qcom: pas: Add QCS8300 remoteproc support
dt-bindings: qcom,pdc: document QCS8300 Power Domain Controller
dt-bindings: soc: qcom: add qcom,qcs8300-imem compatible
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mfd: qcom,tcsr: Add compatible for QCS8300
dt-bindings: nvmem: qfprom: Add compatible for QCS8300
dt-bindings: arm: qcom: document QCS8275/QCS8300 SoC and reference board
arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
arm64: dts: qcom: add initial support for QCS8300 DTSI
arm64: dts: qcom: add base QCS8300 RIDE dts
Kyle Deng (1):
dt-bindings: soc: qcom,aoss-qmp: Document the QCS8300 AOSS channel
Shazad Hussain (1):
dt-bindings: power: rpmpd: Add QCS8300 power domains
Tingguo Cheng (1):
pmdomain: qcom: rpmhpd: Add QCS8300 power domains
Xin Liu (3):
dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300
dt-bindings: ufs: qcom: Document the QCS8300 UFS Controller
phy: qcom-qmp-ufs: Add support for QCS8300
Zhenhua Huang (2):
dt-bindings: arm-smmu: Add compatible for QCS8300 SoC
dt-bindings: firmware: qcom,scm: document SCM on QCS8300 SoCs
Documentation/devicetree/bindings/arm/qcom.yaml | 8 +
.../devicetree/bindings/firmware/qcom,scm.yaml | 1 +
.../bindings/interrupt-controller/qcom,pdc.yaml | 1 +
.../devicetree/bindings/iommu/arm,smmu.yaml | 2 +
.../devicetree/bindings/mailbox/qcom-ipcc.yaml | 1 +
.../devicetree/bindings/mfd/qcom,tcsr.yaml | 1 +
.../devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
.../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 2 +
.../devicetree/bindings/power/qcom,rpmpd.yaml | 1 +
.../bindings/remoteproc/qcom,sa8775p-pas.yaml | 6 +
.../bindings/soc/qcom/qcom,aoss-qmp.yaml | 1 +
.../devicetree/bindings/sram/qcom,imem.yaml | 1 +
.../devicetree/bindings/ufs/qcom,ufs.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 246 ++++
arch/arm64/boot/dts/qcom/qcs8300.dtsi | 1282 ++++++++++++++++++++
arch/arm64/configs/defconfig | 3 +
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 3 +
drivers/pmdomain/qcom/rpmhpd.c | 24 +
drivers/remoteproc/qcom_q6v5_pas.c | 3 +
include/dt-bindings/power/qcom-rpmpd.h | 19 +
21 files changed, 1609 insertions(+)
---
base-commit: eb8c5ca373cbb018a84eb4db25c863302c9b6314
change-id: 20240829-qcs8300_initial_dtsi-1a386eb317d3
Best regards,
--
Jingyi Wang <quic_jingyw@...cinc.com>
Powered by blists - more mailing lists