lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240905075854.e2almocmqdbm7etn@thinkpad>
Date: Thu, 5 Sep 2024 13:28:54 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Rajendra Nayak <quic_rjendra@...cinc.com>, bp@...en8.de,
	tony.luck@...el.com, mchehab@...nel.org, rric@...nel.org,
	konradybcio@...nel.org, quic_sibis@...cinc.com,
	abel.vesa@...aro.org, linux-arm-msm@...r.kernel.org,
	linux-edac@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] EDAC/qcom: Make irq configuration optional

On Wed, Sep 04, 2024 at 03:56:47PM -0500, Bjorn Andersson wrote:
> On Tue, Sep 03, 2024 at 03:45:10PM GMT, Rajendra Nayak wrote:
> > On most modern qualcomm SoCs, the configuration necessary to enable the
> > Tag/Data RAM related irqs being propagated to the SoC irq controller is
> > already done in firmware (in DSF or 'DDR System Firmware')
> > 
> > On some like the x1e80100, these registers aren't even accesible to the
> > kernel causing a crash when edac device is probed.
> > 
> > Hence, make the irq configuration optional in the driver and mark x1e80100
> > as the SoC on which this should be avoided.
> > 
> > Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
> > Reported-by: Bjorn Andersson <andersson@...nel.org>
> > Signed-off-by: Rajendra Nayak <quic_rjendra@...cinc.com>
> > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> 
> Mani, would you like me to pick this through the qcom tree?
> 

You can. Previously, qcom_edac patches with LLCC dependency were merged through
qcom tree. Since the EDAC change is pretty trivial, I think you don't need to
wait for an Ack from the EDAC maintainers.

EDAC maintainers: Feel free to yell at me if you feel like I'm stepping onto
your shoes.

- Mani

> Regards,
> Bjorn
> 
> > ---
> > v2: 
> > Minor typo fixed in changelog
> > 
> >  drivers/edac/qcom_edac.c           | 8 +++++---
> >  drivers/soc/qcom/llcc-qcom.c       | 3 +++
> >  include/linux/soc/qcom/llcc-qcom.h | 2 ++
> >  3 files changed, 10 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
> > index d3cd4cc54ace..96611ca09ac5 100644
> > --- a/drivers/edac/qcom_edac.c
> > +++ b/drivers/edac/qcom_edac.c
> > @@ -342,9 +342,11 @@ static int qcom_llcc_edac_probe(struct platform_device *pdev)
> >  	int ecc_irq;
> >  	int rc;
> >  
> > -	rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap);
> > -	if (rc)
> > -		return rc;
> > +	if (!llcc_driv_data->ecc_irq_configured) {
> > +		rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap);
> > +		if (rc)
> > +			return rc;
> > +	}
> >  
> >  	/* Allocate edac control info */
> >  	edev_ctl = edac_device_alloc_ctl_info(0, "qcom-llcc", 1, "bank",
> > diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> > index 8fa4ffd3a9b5..b1c0ae9991d6 100644
> > --- a/drivers/soc/qcom/llcc-qcom.c
> > +++ b/drivers/soc/qcom/llcc-qcom.c
> > @@ -139,6 +139,7 @@ struct qcom_llcc_config {
> >  	int size;
> >  	bool need_llcc_cfg;
> >  	bool no_edac;
> > +	bool irq_configured;
> >  };
> >  
> >  struct qcom_sct_config {
> > @@ -718,6 +719,7 @@ static const struct qcom_llcc_config x1e80100_cfg[] = {
> >  		.need_llcc_cfg	= true,
> >  		.reg_offset	= llcc_v2_1_reg_offset,
> >  		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
> > +		.irq_configured = true,
> >  	},
> >  };
> >  
> > @@ -1345,6 +1347,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
> >  	drv_data->cfg = llcc_cfg;
> >  	drv_data->cfg_size = sz;
> >  	drv_data->edac_reg_offset = cfg->edac_reg_offset;
> > +	drv_data->ecc_irq_configured = cfg->irq_configured;
> >  	mutex_init(&drv_data->lock);
> >  	platform_set_drvdata(pdev, drv_data);
> >  
> > diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
> > index 9e9f528b1370..acad1f4cf854 100644
> > --- a/include/linux/soc/qcom/llcc-qcom.h
> > +++ b/include/linux/soc/qcom/llcc-qcom.h
> > @@ -125,6 +125,7 @@ struct llcc_edac_reg_offset {
> >   * @num_banks: Number of llcc banks
> >   * @bitmap: Bit map to track the active slice ids
> >   * @ecc_irq: interrupt for llcc cache error detection and reporting
> > + * @ecc_irq_configured: 'True' if firmware has already configured the irq propagation
> >   * @version: Indicates the LLCC version
> >   */
> >  struct llcc_drv_data {
> > @@ -139,6 +140,7 @@ struct llcc_drv_data {
> >  	u32 num_banks;
> >  	unsigned long *bitmap;
> >  	int ecc_irq;
> > +	bool ecc_irq_configured;
> >  	u32 version;
> >  };
> >  
> > -- 
> > 2.34.1
> > 

-- 
மணிவண்ணன் சதாசிவம்

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ