lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Ztsk23X_0p57KGSS@pengutronix.de>
Date: Fri, 6 Sep 2024 17:50:51 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Andrew Lunn <andrew@...n.ch>
Cc: Heiner Kallweit <hkallweit1@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Florian Fainelli <f.fainelli@...il.com>, kernel@...gutronix.de,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	Russell King <linux@...linux.org.uk>, devicetree@...r.kernel.org
Subject: Re: [PATCH v1] dt-bindings: net: ethernet-phy: Add
 forced-master/slave properties for SPE PHYs

On Fri, Sep 06, 2024 at 05:11:54PM +0200, Andrew Lunn wrote:
> On Fri, Sep 06, 2024 at 04:49:05PM +0200, Oleksij Rempel wrote:
> > Add two new properties, `forced-master` and `forced-slave`, to the
> > ethernet-phy binding. These properties are intended for Single Pair
> > Ethernet (1000/100/10Base-T1) PHYs, where each PHY and product may have
> > a predefined link role (master or slave). Typically, these roles are set
> > by hardware strap pins, but in some cases, device tree configuration is
> > necessary.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > ---
> >  .../devicetree/bindings/net/ethernet-phy.yaml | 22 +++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > index d9b62741a2259..af7a1eb6ceff6 100644
> > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > @@ -158,6 +158,28 @@ properties:
> >        Mark the corresponding energy efficient ethernet mode as
> >        broken and request the ethernet to stop advertising it.
> > 
> > +  forced-master:
> > +    $ref: /schemas/types.yaml#/definitions/flag
> > +    description:
> > +      If set, forces the PHY to operate as a master. This is used in Single Pair
> > +      Ethernet (1000/100/10Base-T1) where each PHY and product has a predefined
> > +      link role (master or slave). This property is board-specific, as the role
> > +      is usually configured by strap pins but can be set through the device tree
> > +      if needed.
> > +      This property is mutually exclusive with 'forced-slave'; only one of them
> > +      should be used.
> 
> DT reviewers tend to complain about such mutually exclusive
> properties.

Yes, at this point i was uncertain.

> What you are effectively adding is support for the ethtool:
> 
> ethtool -s [master-slave preferred-master|preferred-slave|forced-master|forced-slave]

ack

> 10Base-T1 often does not have autoneg, so preferred-master &
> preferred-slave make non sense in this context, but i wounder if
> somebody will want these later. An Ethernet switch is generally
> preferred-master for example, but the client is preferred-slave.

Good point.

> Maybe make the property a string with supported values 'forced-master'
> and 'forced-slave', leaving it open for the other two to be added
> later.
> 
> I've not seen the implementation yet, but i don't think there is much
> driver specific here. We already have phydev->master_slave_set, it
> just needs to be set from this property. Can it be done in phylib core
> somewhere?

Yes, this is the idea.

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ