lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Ztrs6bA7gfSCl4e7@smile.fi.intel.com>
Date: Fri, 6 Sep 2024 14:52:09 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Kimriver Liu <kimriver.liu@...ngine.com>
Cc: jarkko.nikula@...ux.intel.com, mika.westerberg@...ux.intel.com,
	jsd@...ihalf.com, andi.shyti@...nel.org, linux-i2c@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH] i2c: designware: fix master is holding SCL low while
 ENABLE bit is disabled

On Fri, Sep 06, 2024 at 03:47:31PM +0800, Kimriver Liu wrote:
> It was observed issuing ABORT bit(IC_ENABLE[1]) will not work when
> IC_ENABLE is already disabled.
> 
> Check if ENABLE bit(IC_ENABLE[0]) is disabled when the master is
> holding SCL low. If ENABLE bit is disabled, the software need
> enable it before trying to issue ABORT bit. otherwise,
> the controller ignores any write to ABORT bit.

This is *still* version 1!

-- 
With Best Regards,
Andy Shevchenko



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ