linux-kernel - [PATCH v4 06/11] crypto: qce - Convert register r/w for sha via BAM/DMA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240909092632.2776160-7-quic_mdalam@quicinc.com>
Date: Mon, 9 Sep 2024 14:56:27 +0530
From: Md Sadre Alam <quic_mdalam@...cinc.com>
To: <thara.gopinath@...il.com>, <herbert@...dor.apana.org.au>,
        <davem@...emloft.net>, <vkoul@...nel.org>, <kees@...nel.org>,
        <robin.murphy@....com>, <fenghua.yu@...el.com>, <av2082000@...il.com>,
        <u.kleine-koenig@...gutronix.d>, <linux-crypto@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <dmaengine@...r.kernel.org>, <quic_varada@...cinc.com>,
        <quic_srichara@...cinc.com>
CC: <quic_mdalam@...cinc.com>
Subject: [PATCH v4 06/11] crypto: qce - Convert register r/w for sha via BAM/DMA

Convert register read/write for sha via BAM/DMA.
with this change all the crypto register configuration
will be done via BAM/DMA. This change will prepare command
descriptor for all register and write it once.

Signed-off-by: Md Sadre Alam <quic_mdalam@...cinc.com>
---

Change in [v4]

* No change 
 
Change in [v3]

* No change

Change in [v2]

* Added initial support to read/write crypto
  register via BAM for SHA

Change in [v1]

* This patch was not included in [v1]

 drivers/crypto/qce/common.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/crypto/qce/common.c b/drivers/crypto/qce/common.c
index d1da6b1938f3..d485762a3fdc 100644
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -157,17 +157,19 @@ static int qce_setup_regs_ahash(struct crypto_async_request *async_req)
 	__be32 mackey[QCE_SHA_HMAC_KEY_SIZE / sizeof(__be32)] = {0};
 	u32 auth_cfg = 0, config;
 	unsigned int iv_words;
+	int ret;
 
 	/* if not the last, the size has to be on the block boundary */
 	if (!rctx->last_blk && req->nbytes % blocksize)
 		return -EINVAL;
 
+	qce_clear_bam_transaction(qce);
 	qce_setup_config(qce);
 
 	if (IS_CMAC(rctx->flags)) {
-		qce_write(qce, REG_AUTH_SEG_CFG, 0);
-		qce_write(qce, REG_ENCR_SEG_CFG, 0);
-		qce_write(qce, REG_ENCR_SEG_SIZE, 0);
+		qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, 0, 1);
+		qce_write_reg_dma(qce, REG_ENCR_SEG_CFG, 0, 1);
+		qce_write_reg_dma(qce, REG_ENCR_SEG_SIZE, 0, 1);
 		qce_clear_array(qce, REG_AUTH_IV0, 16);
 		qce_clear_array(qce, REG_AUTH_KEY0, 16);
 		qce_clear_array(qce, REG_AUTH_BYTECNT0, 4);
@@ -213,18 +215,24 @@ static int qce_setup_regs_ahash(struct crypto_async_request *async_req)
 		auth_cfg &= ~BIT(AUTH_FIRST_SHIFT);
 
 go_proc:
-	qce_write(qce, REG_AUTH_SEG_CFG, auth_cfg);
-	qce_write(qce, REG_AUTH_SEG_SIZE, req->nbytes);
-	qce_write(qce, REG_AUTH_SEG_START, 0);
-	qce_write(qce, REG_ENCR_SEG_CFG, 0);
-	qce_write(qce, REG_SEG_SIZE, req->nbytes);
+	qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, auth_cfg, 1);
+	qce_write_reg_dma(qce, REG_AUTH_SEG_SIZE, req->nbytes, 1);
+	qce_write_reg_dma(qce, REG_AUTH_SEG_START, 0, 1);
+	qce_write_reg_dma(qce, REG_ENCR_SEG_CFG, 0, 1);
+	qce_write_reg_dma(qce, REG_SEG_SIZE, req->nbytes, 1);
 
 	/* get little endianness */
 	config = qce_config_reg(qce, 1);
-	qce_write(qce, REG_CONFIG, config);
+	qce_write_reg_dma(qce, REG_CONFIG, config, 1);
 
 	qce_crypto_go(qce, true);
 
+	ret = qce_submit_cmd_desc(qce, 0);
+	if (ret) {
+		dev_err(qce->dev, "Error in sha cmd descriptor\n");
+		return ret;
+	}
+
 	return 0;
 }
 #endif
-- 
2.34.1