| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Zui5XFSLbZTTNxSf@gallifrey>
Date: Mon, 16 Sep 2024 23:03:56 +0000
From: "Dr. David Alan Gilbert" <linux@...blig.org>
To: Bob Gill <gillb5@...us.net>
Cc: linux-kernel@...r.kernel.org
Subject: Re: 6.11.0 crash on X startup
* Bob Gill (gillb5@...us.net) wrote:
> So I think I know what you are look for. My grub line is
>
> "quiet splash" without modeset.
>
> I don't know how to log dmesg automatically from boot. If I
>
> start from a recovery kernel in the bootloader, I can give you dmesg,
>
> but if I start from a regular kernel (6.11.0 for example), as soon as it
>
> gets to the X server, it crashes the system. I can't type ctrl-alt-1
> moments after the bootloader screen disappears
Oh, I didn't understand that from your initial report - I thought it was
only X not starting.
> (while its still reading the kernel source from disk and loading it into
> memory) to get to a
>
> terminal and avoid the X server (I do attempt it, but have never been
> successful). As soon as it tries to start the X server, the system
> crashes. As I understand it, dmesg is stored in a ring buffer (and does not
> survive reboot).
>
> Did you want the output of /var/log/kern.log (or /var/log/kern.log.1)?
OK, so if you do have a boot message from the failed kernel without the nomodeset
then yes that would be great. It depends on your distro where it would put that,
and a lot of luck whether it manages to get to disk before the crash.
Some thoughts:
a) When it crashes, you say ctrl-alt-1 doesn't work - does alt-sysrq-h do anything?
b) How about caps-lock when it crashes - does the light change?
c) Can you boot into non-graphics, - e.g. something like adding
systemd.unit=multi-user.target
I think should get you a text login? (Depending on distro etc)
If that fails, try just adding the word single
Dave
> On 2024-09-16 14:36, Dr. David Alan Gilbert wrote:
> > * Bob Gill (gillb5@...us.net) wrote:
> > > OK, so my grub line looks like "quiet splash nomodeset"
> > Sorry, no; I was asking for a 6.11.0 boot *without* the nomodeset - in the same
> > way that the 6.10.0 dmesg boots so we can compare them.
> >
> > > I have two monitors, of which only the main monitor starts with an X server
> > > (and the response is slow).
> > >
> > > Here is the result of dmesg. The parts that look interesting are around the
> > > 7.3 second mark that say
> > >
> > > "ACPI: OSL: Resource conflict; ACPI support missing from driver?"
> > It's not necessarily relevant.
> >
> > Dave
> >
> > > Oh, and thanks for replying.
> > >
> > > [ 0.000000] Linux version 6.11.0 (root@...edom) (gcc (Ubuntu
> > > 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP
> > > PREEMPT_DYNAMIC Sun Sep 15 13:10:55 MDT 2024
> > > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.11.0
> > > root=UUID=94072726-5fed-439f-a496-8e6aaa88617e ro quiet splash nomodeset
> > > [ 0.000000] KERNEL supported cpus:
> > > [ 0.000000] Intel GenuineIntel
> > > [ 0.000000] AMD AuthenticAMD
> > > [ 0.000000] Hygon HygonGenuine
> > > [ 0.000000] Centaur CentaurHauls
> > > [ 0.000000] zhaoxin Shanghai
> > > [ 0.000000] BIOS-provided physical RAM map:
> > > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
> > > [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff]
> > > reserved
> > > [ 0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff]
> > > reserved
> > > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
> > > [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI
> > > data
> > > [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI
> > > NVS
> > > [ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff]
> > > reserved
> > > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
> > > reserved
> > > [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff]
> > > reserved
> > > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
> > > [ 0.000000] NX (Execute Disable) protection: active
> > > [ 0.000000] APIC: Static calls initialized
> > > [ 0.000000] SMBIOS 2.5 present.
> > > [ 0.000000] DMI: System manufacturer System Product Name/P6T DELUXE, BIOS
> > > 2209 09/21/2010
> > > [ 0.000000] DMI: Memory slots populated: 6/6
> > > [ 0.000000] tsc: Fast TSC calibration using PIT
> > > [ 0.000000] tsc: Detected 2672.776 MHz processor
> > > [ 0.001528] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> > > [ 0.001534] e820: remove [mem 0x000a0000-0x000fffff] usable
> > > [ 0.001544] last_pfn = 0x340000 max_arch_pfn = 0x400000000
> > > [ 0.001553] total RAM covered: 12280M
> > > [ 0.001829] Found optimal setting for mtrr clean up
> > > [ 0.001830] gran_size: 64K chunk_size: 16M num_reg: 6 lose
> > > cover RAM: 0G
> > > [ 0.001837] MTRR map: 8 entries (5 fixed + 3 variable; max 21), built
> > > from 8 variable MTRRs
> > > [ 0.001841] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
> > > [ 0.002807] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
> > > [ 0.002820] last_pfn = 0xbf798 max_arch_pfn = 0x400000000
> > > [ 0.014822] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
> > > [ 0.015378] RAMDISK: [mem 0x0b466000-0x37feefff]
> > > [ 0.015390] ACPI: Early table checksum verification disabled
> > > [ 0.015394] ACPI: RSDP 0x00000000000FB150 000024 (v02 ACPIAM)
> > > [ 0.015401] ACPI: XSDT 0x00000000BF780100 000064 (v01 092110 XSDT0924
> > > 20100921 MSFT 00000097)
> > > [ 0.015410] ACPI: FACP 0x00000000BF780290 0000F4 (v03 092110 FACP0924
> > > 20100921 MSFT 00000097)
> > > [ 0.015420] ACPI: DSDT 0x00000000BF7804B0 00B69B (v01 A1087 A1087001
> > > 00000001 INTL 20060113)
> > > [ 0.015426] ACPI: FACS 0x00000000BF798000 000040
> > > [ 0.015432] ACPI: FACS 0x00000000BF798000 000040
> > > [ 0.015437] ACPI: APIC 0x00000000BF780390 0000D8 (v01 092110 APIC0924
> > > 20100921 MSFT 00000097)
> > > [ 0.015443] ACPI: MCFG 0x00000000BF780470 00003C (v01 092110 OEMMCFG
> > > 20100921 MSFT 00000097)
> > > [ 0.015449] ACPI: OEMB 0x00000000BF798040 000072 (v01 092110 OEMB0924
> > > 20100921 MSFT 00000097)
> > > [ 0.015456] ACPI: HPET 0x00000000BF78F4B0 000038 (v01 092110 OEMHPET
> > > 20100921 MSFT 00000097)
> > > [ 0.015462] ACPI: DMAR 0x00000000BF7980C0 000138 (v01 AMI OEMDMAR
> > > 00000001 MSFT 00000097)
> > > [ 0.015468] ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 092110 OEMOSFR
> > > 20100921 MSFT 00000097)
> > > [ 0.015474] ACPI: SSDT 0x00000000BF799E10 000363 (v01 DpgPmm CpuPm
> > > 00000012 INTL 20060113)
> > > [ 0.015480] ACPI: Reserving FACP table memory at [mem
> > > 0xbf780290-0xbf780383]
> > > [ 0.015482] ACPI: Reserving DSDT table memory at [mem
> > > 0xbf7804b0-0xbf78bb4a]
> > > [ 0.015484] ACPI: Reserving FACS table memory at [mem
> > > 0xbf798000-0xbf79803f]
> > > [ 0.015485] ACPI: Reserving FACS table memory at [mem
> > > 0xbf798000-0xbf79803f]
> > > [ 0.015487] ACPI: Reserving APIC table memory at [mem
> > > 0xbf780390-0xbf780467]
> > > [ 0.015489] ACPI: Reserving MCFG table memory at [mem
> > > 0xbf780470-0xbf7804ab]
> > > [ 0.015491] ACPI: Reserving OEMB table memory at [mem
> > > 0xbf798040-0xbf7980b1]
> > > [ 0.015492] ACPI: Reserving HPET table memory at [mem
> > > 0xbf78f4b0-0xbf78f4e7]
> > > [ 0.015494] ACPI: Reserving DMAR table memory at [mem
> > > 0xbf7980c0-0xbf7981f7]
> > > [ 0.015496] ACPI: Reserving OSFR table memory at [mem
> > > 0xbf78f4f0-0xbf78f59f]
> > > [ 0.015498] ACPI: Reserving SSDT table memory at [mem
> > > 0xbf799e10-0xbf79a172]
> > > [ 0.015676] No NUMA configuration found
> > > [ 0.015678] Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
> > > [ 0.015692] NODE_DATA(0) allocated [mem 0x33ffcd000-0x33fff7fff]
> > > [ 0.016090] Zone ranges:
> > > [ 0.016092] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> > > [ 0.016095] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> > > [ 0.016098] Normal [mem 0x0000000100000000-0x000000033fffffff]
> > > [ 0.016100] Device empty
> > > [ 0.016102] Movable zone start for each node
> > > [ 0.016106] Early memory node ranges
> > > [ 0.016106] node 0: [mem 0x0000000000001000-0x000000000009dfff]
> > > [ 0.016109] node 0: [mem 0x0000000000100000-0x00000000bf77ffff]
> > > [ 0.016112] node 0: [mem 0x0000000100000000-0x000000033fffffff]
> > > [ 0.016116] Initmem setup node 0 [mem
> > > 0x0000000000001000-0x000000033fffffff]
> > > [ 0.016124] On node 0, zone DMA: 1 pages in unavailable ranges
> > > [ 0.016158] On node 0, zone DMA: 98 pages in unavailable ranges
> > > [ 0.043074] On node 0, zone Normal: 2176 pages in unavailable ranges
> > > [ 0.043371] ACPI: PM-Timer IO Port: 0x808
> > > [ 0.043400] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
> > > 0-23
> > > [ 0.043408] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI
> > > 24-47
> > > [ 0.043412] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > > [ 0.043415] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > > [ 0.043423] ACPI: Using ACPI (MADT) for SMP configuration information
> > > [ 0.043426] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> > > [ 0.043442] CPU topo: Max. logical packages: 2
> > > [ 0.043444] CPU topo: Max. logical dies: 2
> > > [ 0.043445] CPU topo: Max. dies per package: 1
> > > [ 0.043456] CPU topo: Max. threads per core: 2
> > > [ 0.043458] CPU topo: Num. cores per package: 4
> > > [ 0.043459] CPU topo: Num. threads per package: 8
> > > [ 0.043460] CPU topo: Allowing 8 present CPUs plus 8 hotplug CPUs
> > > [ 0.043478] PM: hibernation: Registered nosave memory: [mem
> > > 0x00000000-0x00000fff]
> > > [ 0.043482] PM: hibernation: Registered nosave memory: [mem
> > > 0x0009e000-0x0009efff]
> > > [ 0.043483] PM: hibernation: Registered nosave memory: [mem
> > > 0x0009f000-0x0009ffff]
> > > [ 0.043485] PM: hibernation: Registered nosave memory: [mem
> > > 0x000a0000-0x000e4fff]
> > > [ 0.043487] PM: hibernation: Registered nosave memory: [mem
> > > 0x000e5000-0x000fffff]
> > > [ 0.043489] PM: hibernation: Registered nosave memory: [mem
> > > 0xbf780000-0xbf797fff]
> > > [ 0.043491] PM: hibernation: Registered nosave memory: [mem
> > > 0xbf798000-0xbf7dbfff]
> > > [ 0.043493] PM: hibernation: Registered nosave memory: [mem
> > > 0xbf7dc000-0xbfffffff]
> > > [ 0.043494] PM: hibernation: Registered nosave memory: [mem
> > > 0xc0000000-0xfedfffff]
> > > [ 0.043496] PM: hibernation: Registered nosave memory: [mem
> > > 0xfee00000-0xfee00fff]
> > > [ 0.043497] PM: hibernation: Registered nosave memory: [mem
> > > 0xfee01000-0xffdfffff]
> > > [ 0.043499] PM: hibernation: Registered nosave memory: [mem
> > > 0xffe00000-0xffffffff]
> > > [ 0.043501] [mem 0xc0000000-0xfedfffff] available for PCI devices
> > > [ 0.043503] Booting paravirtualized kernel on bare hardware
> > > [ 0.043507] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
> > > 0xffffffff, max_idle_ns: 7645519600211568 ns
> > > [ 0.043517] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16
> > > nr_node_ids:1
> > > [ 0.045202] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
> > > [ 0.045216] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
> > > [ 0.045221] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
> > > [ 0.045232] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
> > > [ 0.045264] Kernel command line: BOOT_IMAGE=/vmlinuz-6.11.0
> > > root=UUID=94072726-5fed-439f-a496-8e6aaa88617e ro quiet splash nomodeset
> > > [ 0.045420] Booted with the nomodeset parameter. Only the system
> > > framebuffer will be available
> > > [ 0.045424] Unknown kernel command line parameters "splash
> > > BOOT_IMAGE=/vmlinuz-6.11.0", will be passed to user space.
> > > [ 0.047571] Dentry cache hash table entries: 2097152 (order: 12, 16777216
> > > bytes, linear)
> > > [ 0.048684] Inode-cache hash table entries: 1048576 (order: 11, 8388608
> > > bytes, linear)
> > > [ 0.049079] Fallback order for Node 0: 0
> > > [ 0.049086] Built 1 zonelists, mobility grouping on. Total pages:
> > > 3143453
> > > [ 0.049088] Policy zone: Normal
> > > [ 0.049100] mem auto-init: stack:off, heap alloc:on, heap free:off
> > > [ 0.049115] software IO TLB: area num 16.
> > > [ 0.128195] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
> > > [ 0.128395] Kernel/User page tables isolation: enabled
> > > [ 0.128531] ftrace: allocating 53163 entries in 208 pages
> > > [ 0.139782] ftrace: allocated 208 pages with 3 groups
> > > [ 0.140826] Dynamic Preempt: voluntary
> > > [ 0.141193] rcu: Preemptible hierarchical RCU implementation.
> > > [ 0.141195] rcu: RCU restricting CPUs from NR_CPUS=8192 to
> > > nr_cpu_ids=16.
> > > [ 0.141198] Trampoline variant of Tasks RCU enabled.
> > > [ 0.141199] Rude variant of Tasks RCU enabled.
> > > [ 0.141200] Tracing variant of Tasks RCU enabled.
> > > [ 0.141201] rcu: RCU calculated value of scheduler-enlistment delay is 25
> > > jiffies.
> > > [ 0.141202] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
> > > [ 0.141227] RCU Tasks: Setting shift to 4 and lim to 1
> > > rcu_task_cb_adjust=1.
> > > [ 0.141231] RCU Tasks Rude: Setting shift to 4 and lim to 1
> > > rcu_task_cb_adjust=1.
> > > [ 0.141235] RCU Tasks Trace: Setting shift to 4 and lim to 1
> > > rcu_task_cb_adjust=1.
> > > [ 0.147244] NR_IRQS: 524544, nr_irqs: 960, preallocated irqs: 16
> > > [ 0.147513] rcu: srcu_init: Setting srcu_struct sizes based on
> > > contention.
> > > [ 0.147681] Console: colour dummy device 80x25
> > > [ 0.147685] printk: legacy console [tty0] enabled
> > > [ 0.148030] ACPI: Core revision 20240322
> > > [ 0.148345] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
> > > max_idle_ns: 133484882848 ns
> > > [ 0.148362] APIC: Switch to symmetric I/O mode setup
> > > [ 0.148364] DMAR-IR: This system BIOS has enabled interrupt remapping
> > > on a chipset that contains an erratum making that
> > > feature unstable. To maintain system stability
> > > interrupt remapping is being disabled. Please
> > > contact your BIOS vendor for an update
> > > [ 0.148373] APIC: Switched APIC routing to: physical flat
> > > [ 0.148941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> > > [ 0.168361] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
> > > 0x2686c8f140e, max_idle_ns: 440795237667 ns
> > > [ 0.168371] Calibrating delay loop (skipped), value calculated using
> > > timer frequency.. 5345.55 BogoMIPS (lpj=10691104)
> > > [ 0.168399] CPU0: Thermal monitoring enabled (TM1)
> > > [ 0.168434] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
> > > [ 0.168437] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
> > > [ 0.168442] process: using mwait in idle threads
> > > [ 0.168445] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
> > > pointer sanitization
> > > [ 0.168448] Spectre V2 : Mitigation: Retpolines
> > > [ 0.168450] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB
> > > on context switch
> > > [ 0.168451] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
> > > [ 0.168453] Speculative Store Bypass: Vulnerable
> > > [ 0.168456] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
> > > [ 0.168458] MMIO Stale Data: Unknown: No mitigations
> > > [ 0.168461] x86/fpu: x87 FPU will use FXSAVE
> > > [ 0.199521] Freeing SMP alternatives memory: 44K
> > > [ 0.199542] pid_max: default: 32768 minimum: 301
> > > [ 0.200572] LSM: initializing
> > > lsm=lockdown,capability,landlock,apparmor,ima,evm
> > > [ 0.200869] landlock: Up and running.
> > > [ 0.200909] AppArmor: AppArmor initialized
> > > [ 0.201323] Mount-cache hash table entries: 32768 (order: 6, 262144
> > > bytes, linear)
> > > [ 0.201357] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
> > > bytes, linear)
> > > [ 0.315223] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
> > > (family: 0x6, model: 0x1a, stepping: 0x4)
> > > [ 0.315671] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR,
> > > Intel PMU driver.
> > > [ 0.315695] core: CPU erratum AAJ80 worked around
> > > [ 0.315697] ... version: 3
> > > [ 0.315699] ... bit width: 48
> > > [ 0.315700] ... generic registers: 4
> > > [ 0.315702] ... value mask: 0000ffffffffffff
> > > [ 0.315704] ... max period: 000000007fffffff
> > > [ 0.315705] ... fixed-purpose events: 3
> > > [ 0.315706] ... event mask: 000000070000000f
> > > [ 0.315916] signal: max sigframe size: 1440
> > > [ 0.315941] Estimated ratio of average max frequency by base frequency
> > > (times 1024): 1075
> > > [ 0.316366] rcu: Hierarchical SRCU implementation.
> > > [ 0.316366] rcu: Max phase no-delay instances is 1000.
> > > [ 0.316366] Timer migration: 2 hierarchy levels; 8 children per group; 2
> > > crossnode level
> > > [ 0.316714] NMI watchdog: Enabled. Permanently consumes one hw-PMU
> > > counter.
> > > [ 0.317011] smp: Bringing up secondary CPUs ...
> > > [ 0.317232] smpboot: x86: Booting SMP configuration:
> > > [ 0.317235] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
> > > [ 0.328546] MDS CPU bug present and SMT on, data leak possible. See
> > > https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more
> > > details.
> > > [ 0.334368] smp: Brought up 1 node, 8 CPUs
> > > [ 0.334368] smpboot: Total of 8 processors activated (42764.41 BogoMIPS)
> > > [ 0.336514] Memory: 11491168K/12573812K available (20480K kernel code,
> > > 4237K rwdata, 7328K rodata, 4860K init, 5060K bss, 1068464K reserved, 0K
> > > cma-reserved)
> > > [ 0.337198] devtmpfs: initialized
> > > [ 0.337198] x86/mm: Memory block size: 128MB
> > > [ 0.341390] ACPI: PM: Registering ACPI NVS region [mem
> > > 0xbf798000-0xbf7dbfff] (278528 bytes)
> > > [ 0.341390] clocksource: jiffies: mask: 0xffffffff max_cycles:
> > > 0xffffffff, max_idle_ns: 7645041785100000 ns
> > > [ 0.341390] futex hash table entries: 4096 (order: 6, 262144 bytes,
> > > linear)
> > > [ 0.341390] pinctrl core: initialized pinctrl subsystem
> > > [ 0.341390] PM: RTC time: 20:18:41, date: 2024-09-16
> > > [ 0.342165] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> > > [ 0.342551] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic
> > > allocations
> > > [ 0.342790] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic
> > > allocations
> > > [ 0.343038] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for
> > > atomic allocations
> > > [ 0.343068] audit: initializing netlink subsys (disabled)
> > > [ 0.343091] audit: type=2000 audit(1726517920.192:1): state=initialized
> > > audit_enabled=0 res=1
> > > [ 0.344380] thermal_sys: Registered thermal governor 'fair_share'
> > > [ 0.344382] thermal_sys: Registered thermal governor 'bang_bang'
> > > [ 0.344384] thermal_sys: Registered thermal governor 'step_wise'
> > > [ 0.344385] thermal_sys: Registered thermal governor 'user_space'
> > > [ 0.344386] thermal_sys: Registered thermal governor 'power_allocator'
> > > [ 0.344403] EISA bus registered
> > > [ 0.344424] cpuidle: using governor ladder
> > > [ 0.344429] cpuidle: using governor menu
> > > [ 0.344500] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> > > [ 0.344873] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for
> > > domain 0000 [bus 00-ff]
> > > [ 0.344880] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not
> > > reserved)
> > > [ 0.344882] PCI: Using configuration type 1 for base access
> > > [ 0.344998] kprobes: kprobe jump-optimization is enabled. All kprobes are
> > > optimized if possible.
> > > [ 0.347235] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
> > > [ 0.347235] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
> > > [ 0.351318] ACPI: Added _OSI(Module Device)
> > > [ 0.351318] ACPI: Added _OSI(Processor Device)
> > > [ 0.351318] ACPI: Added _OSI(3.0 _SCP Extensions)
> > > [ 0.351318] ACPI: Added _OSI(Processor Aggregator Device)
> > > [ 0.366412] ACPI: 2 ACPI AML tables successfully acquired and loaded
> > > [ 0.401749] ACPI: Dynamic OEM Table Load:
> > > [ 0.401749] ACPI: SSDT 0xFFFF9DD880974000 001C0C (v01 DpgPmm P001Ist
> > > 00000011 INTL 20060113)
> > > [ 0.405367] ACPI: Interpreter enabled
> > > [ 0.405389] ACPI: PM: (supports S0 S1 S3 S4 S5)
> > > [ 0.405391] ACPI: Using IOAPIC for interrupt routing
> > > [ 0.405439] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for
> > > domain 0000 [bus 00-ff]
> > > [ 0.406832] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI
> > > motherboard resource
> > > [ 0.406849] PCI: Using host bridge windows from ACPI; if necessary, use
> > > "pci=nocrs" and report a bug
> > > [ 0.406851] PCI: Using E820 reservations for host bridge windows
> > > [ 0.407073] ACPI: Enabled 13 GPEs in block 00 to 3F
> > > [ 0.420700] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> > > [ 0.420710] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
> > > ClockPM Segments MSI EDR HPX-Type3]
> > > [ 0.420718] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug
> > > PME AER PCIeCapability LTR DPC]
> > > [ 0.420720] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug
> > > SHPCHotplug PME AER PCIeCapability LTR DPC]
> > > [ 0.420722] acpi PNP0A08:00: _OSC: platform retains control of PCIe
> > > features (AE_NOT_FOUND)
> > > [ 0.421217] PCI host bridge to bus 0000:00
> > > [ 0.421222] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> > > [ 0.421225] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> > > [ 0.421227] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
> > > window]
> > > [ 0.421229] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff
> > > window]
> > > [ 0.421231] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff
> > > window]
> > > [ 0.421233] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff
> > > window]
> > > [ 0.421235] pci_bus 0000:00: root bus resource [bus 00-ff]
> > > [ 0.421259] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 PCIe
> > > Root Port
> > > [ 0.421288] pci 0000:00:00.0: enabling Extended Tags
> > > [ 0.421332] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
> > > [ 0.421435] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 PCIe
> > > Root Port
> > > [ 0.421452] pci 0000:00:01.0: PCI bridge to [bus 01]
> > > [ 0.421469] pci 0000:00:01.0: enabling Extended Tags
> > > [ 0.421514] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> > > [ 0.421651] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 PCIe
> > > Root Port
> > > [ 0.421673] pci 0000:00:03.0: PCI bridge to [bus 02-04]
> > > [ 0.421677] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
> > > [ 0.421680] pci 0000:00:03.0: bridge window [mem 0xfb600000-0xfb8fffff]
> > > [ 0.421688] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xdfffffff
> > > 64bit pref]
> > > [ 0.421695] pci 0000:00:03.0: enabling Extended Tags
> > > [ 0.421740] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> > > [ 0.421868] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 PCIe
> > > Root Port
> > > [ 0.421885] pci 0000:00:07.0: PCI bridge to [bus 05]
> > > [ 0.421903] pci 0000:00:07.0: enabling Extended Tags
> > > [ 0.421947] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> > > [ 0.422074] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 PCIe
> > > Root Complex Integrated Endpoint
> > > [ 0.422186] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 PCIe
> > > Root Complex Integrated Endpoint
> > > [ 0.422294] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 PCIe
> > > Root Complex Integrated Endpoint
> > > [ 0.422397] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
> > > conventional PCI endpoint
> > > [ 0.422490] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
> > > conventional PCI endpoint
> > > [ 0.422531] pci 0000:00:1a.0: BAR 4 [io 0x9800-0x981f]
> > > [ 0.422653] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
> > > conventional PCI endpoint
> > > [ 0.422694] pci 0000:00:1a.1: BAR 4 [io 0x9880-0x989f]
> > > [ 0.422825] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
> > > conventional PCI endpoint
> > > [ 0.422865] pci 0000:00:1a.2: BAR 4 [io 0x9c00-0x9c1f]
> > > [ 0.423001] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
> > > conventional PCI endpoint
> > > [ 0.423018] pci 0000:00:1a.7: BAR 0 [mem 0xfb5ff000-0xfb5ff3ff]
> > > [ 0.423099] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> > > [ 0.423200] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 PCIe
> > > Root Complex Integrated Endpoint
> > > [ 0.423218] pci 0000:00:1b.0: BAR 0 [mem 0xfb5f8000-0xfb5fbfff 64bit]
> > > [ 0.423294] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> > > [ 0.423384] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 PCIe
> > > Root Port
> > > [ 0.423410] pci 0000:00:1c.0: PCI bridge to [bus 0a]
> > > [ 0.423424] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff
> > > 64bit pref]
> > > [ 0.423478] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> > > [ 0.423599] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400 PCIe
> > > Root Port
> > > [ 0.423626] pci 0000:00:1c.1: PCI bridge to [bus 09]
> > > [ 0.423632] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbdfffff]
> > > [ 0.423694] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> > > [ 0.423824] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400 PCIe
> > > Root Port
> > > [ 0.423850] pci 0000:00:1c.2: PCI bridge to [bus 08]
> > > [ 0.423855] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
> > > [ 0.423858] pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
> > > [ 0.423919] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> > > [ 0.424038] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 PCIe
> > > Root Port
> > > [ 0.424064] pci 0000:00:1c.4: PCI bridge to [bus 07]
> > > [ 0.424069] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
> > > [ 0.424072] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
> > > [ 0.424133] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> > > [ 0.424253] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 PCIe
> > > Root Port
> > > [ 0.424279] pci 0000:00:1c.5: PCI bridge to [bus 06]
> > > [ 0.424284] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
> > > [ 0.424287] pci 0000:00:1c.5: bridge window [mem 0xfb900000-0xfb9fffff]
> > > [ 0.424348] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> > > [ 0.424477] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
> > > conventional PCI endpoint
> > > [ 0.424517] pci 0000:00:1d.0: BAR 4 [io 0x9080-0x909f]
> > > [ 0.424643] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
> > > conventional PCI endpoint
> > > [ 0.424684] pci 0000:00:1d.1: BAR 4 [io 0x9400-0x941f]
> > > [ 0.424809] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
> > > conventional PCI endpoint
> > > [ 0.424851] pci 0000:00:1d.2: BAR 4 [io 0x9480-0x949f]
> > > [ 0.424984] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
> > > conventional PCI endpoint
> > > [ 0.425001] pci 0000:00:1d.7: BAR 0 [mem 0xfb5fe000-0xfb5fe3ff]
> > > [ 0.425082] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> > > [ 0.425178] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
> > > conventional PCI bridge
> > > [ 0.425203] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
> > > [ 0.425208] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
> > > [ 0.425211] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
> > > [ 0.425335] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
> > > conventional PCI endpoint
> > > [ 0.425412] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6
> > > ACPI/GPIO/TCO
> > > [ 0.425417] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6
> > > GPIO
> > > [ 0.425420] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294
> > > (mask 0003)
> > > [ 0.425425] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700
> > > (mask 001f)
> > > [ 0.425575] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
> > > conventional PCI endpoint
> > > [ 0.425589] pci 0000:00:1f.2: BAR 0 [io 0x8c00-0x8c07]
> > > [ 0.425596] pci 0000:00:1f.2: BAR 1 [io 0x8880-0x8883]
> > > [ 0.425604] pci 0000:00:1f.2: BAR 2 [io 0x8800-0x8807]
> > > [ 0.425611] pci 0000:00:1f.2: BAR 3 [io 0x8480-0x8483]
> > > [ 0.425618] pci 0000:00:1f.2: BAR 4 [io 0x8400-0x841f]
> > > [ 0.425625] pci 0000:00:1f.2: BAR 5 [mem 0xfb5fc000-0xfb5fc7ff]
> > > [ 0.425666] pci 0000:00:1f.2: PME# supported from D3hot
> > > [ 0.425760] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
> > > conventional PCI endpoint
> > > [ 0.425777] pci 0000:00:1f.3: BAR 0 [mem 0xfb5fd000-0xfb5fd0ff 64bit]
> > > [ 0.425797] pci 0000:00:1f.3: BAR 4 [io 0x0400-0x041f]
> > > [ 0.425902] pci 0000:00:01.0: PCI bridge to [bus 01]
> > > [ 0.425962] pci 0000:02:00.0: [1002:1478] type 01 class 0x060400 PCIe
> > > Switch Upstream Port
> > > [ 0.425977] pci 0000:02:00.0: BAR 0 [mem 0xfb6fc000-0xfb6fffff]
> > > [ 0.425992] pci 0000:02:00.0: PCI bridge to [bus 03-04]
> > > [ 0.425999] pci 0000:02:00.0: bridge window [io 0xa000-0xafff]
> > > [ 0.426002] pci 0000:02:00.0: bridge window [mem 0xfb700000-0xfb8fffff]
> > > [ 0.426012] pci 0000:02:00.0: bridge window [mem 0xcfe00000-0xdfffffff
> > > 64bit pref]
> > > [ 0.426097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> > > [ 0.426163] pci 0000:02:00.0: 16.000 Gb/s available PCIe bandwidth,
> > > limited by 5.0 GT/s PCIe x4 link at 0000:00:03.0 (capable of 63.012 Gb/s
> > > with 16.0 GT/s PCIe x4 link)
> > > [ 0.436388] pci 0000:00:03.0: PCI bridge to [bus 02-04]
> > > [ 0.436467] pci 0000:03:00.0: [1002:1479] type 01 class 0x060400 PCIe
> > > Switch Downstream Port
> > > [ 0.436495] pci 0000:03:00.0: PCI bridge to [bus 04]
> > > [ 0.436501] pci 0000:03:00.0: bridge window [io 0xa000-0xafff]
> > > [ 0.436505] pci 0000:03:00.0: bridge window [mem 0xfb700000-0xfb8fffff]
> > > [ 0.436515] pci 0000:03:00.0: bridge window [mem 0xcfe00000-0xdfffffff
> > > 64bit pref]
> > > [ 0.436600] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> > > [ 0.436763] pci 0000:02:00.0: PCI bridge to [bus 03-04]
> > > [ 0.436832] pci 0000:04:00.0: [1002:743f] type 00 class 0x030000 PCIe
> > > Legacy Endpoint
> > > [ 0.436852] pci 0000:04:00.0: BAR 0 [mem 0xd0000000-0xdfffffff 64bit
> > > pref]
> > > [ 0.436864] pci 0000:04:00.0: BAR 2 [mem 0xcfe00000-0xcfffffff 64bit
> > > pref]
> > > [ 0.436872] pci 0000:04:00.0: BAR 4 [io 0xa000-0xa0ff]
> > > [ 0.436880] pci 0000:04:00.0: BAR 5 [mem 0xfb700000-0xfb7fffff]
> > > [ 0.436888] pci 0000:04:00.0: ROM [mem 0xfb8c0000-0xfb8dffff pref]
> > > [ 0.436925] pci 0000:04:00.0: Video device with shadowed ROM at [mem
> > > 0x000c0000-0x000dffff]
> > > [ 0.436985] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
> > > [ 0.437058] pci 0000:04:00.0: 16.000 Gb/s available PCIe bandwidth,
> > > limited by 5.0 GT/s PCIe x4 link at 0000:00:03.0 (capable of 252.048 Gb/s
> > > with 16.0 GT/s PCIe x16 link)
> > > [ 0.437158] pci 0000:04:00.1: [1002:ab28] type 00 class 0x040300 PCIe
> > > Legacy Endpoint
> > > [ 0.437173] pci 0000:04:00.1: BAR 0 [mem 0xfb8fc000-0xfb8fffff]
> > > [ 0.437271] pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold
> > > [ 0.437411] pci 0000:03:00.0: PCI bridge to [bus 04]
> > > [ 0.437472] pci 0000:00:07.0: PCI bridge to [bus 05]
> > > [ 0.437519] pci 0000:00:1c.0: PCI bridge to [bus 0a]
> > > [ 0.437590] pci 0000:09:00.0: [14f1:8880] type 00 class 0x040000 PCIe
> > > Endpoint
> > > [ 0.437623] pci 0000:09:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit]
> > > [ 0.437793] pci 0000:09:00.0: supports D1 D2
> > > [ 0.437794] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot
> > > [ 0.437927] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You
> > > can enable it with 'pcie_aspm=force'
> > > [ 0.437941] pci 0000:00:1c.1: PCI bridge to [bus 09]
> > > [ 0.438009] pci 0000:08:00.0: [11ab:4364] type 00 class 0x020000 PCIe
> > > Legacy Endpoint
> > > [ 0.438036] pci 0000:08:00.0: BAR 0 [mem 0xfbbfc000-0xfbbfffff 64bit]
> > > [ 0.438048] pci 0000:08:00.0: BAR 2 [io 0xd800-0xd8ff]
> > > [ 0.438088] pci 0000:08:00.0: ROM [mem 0xfbbc0000-0xfbbdffff pref]
> > > [ 0.438159] pci 0000:08:00.0: supports D1 D2
> > > [ 0.438161] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > > [ 0.438257] pci 0000:00:1c.2: ASPM: current common clock configuration is
> > > inconsistent, reconfiguring
> > > [ 0.448394] pci 0000:00:1c.2: PCI bridge to [bus 08]
> > > [ 0.448486] pci 0000:07:00.0: [11ab:6121] type 00 class 0x01018f PCIe
> > > Legacy Endpoint
> > > [ 0.448506] pci 0000:07:00.0: BAR 0 [io 0xcc00-0xcc07]
> > > [ 0.448518] pci 0000:07:00.0: BAR 1 [io 0xc880-0xc883]
> > > [ 0.448529] pci 0000:07:00.0: BAR 2 [io 0xc800-0xc807]
> > > [ 0.448540] pci 0000:07:00.0: BAR 3 [io 0xc480-0xc483]
> > > [ 0.448551] pci 0000:07:00.0: BAR 4 [io 0xc400-0xc40f]
> > > [ 0.448562] pci 0000:07:00.0: BAR 5 [mem 0xfbaffc00-0xfbafffff]
> > > [ 0.448636] pci 0000:07:00.0: supports D1
> > > [ 0.448638] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
> > > [ 0.448727] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You
> > > can enable it with 'pcie_aspm=force'
> > > [ 0.448739] pci 0000:00:1c.4: PCI bridge to [bus 07]
> > > [ 0.448811] pci 0000:06:00.0: [11ab:4364] type 00 class 0x020000 PCIe
> > > Legacy Endpoint
> > > [ 0.448838] pci 0000:06:00.0: BAR 0 [mem 0xfb9fc000-0xfb9fffff 64bit]
> > > [ 0.448850] pci 0000:06:00.0: BAR 2 [io 0xb800-0xb8ff]
> > > [ 0.448891] pci 0000:06:00.0: ROM [mem 0xfb9c0000-0xfb9dffff pref]
> > > [ 0.448963] pci 0000:06:00.0: supports D1 D2
> > > [ 0.448965] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > > [ 0.449068] pci 0000:00:1c.5: ASPM: current common clock configuration is
> > > inconsistent, reconfiguring
> > > [ 0.460394] pci 0000:00:1c.5: PCI bridge to [bus 06]
> > > [ 0.460427] pci_bus 0000:0b: extended config space not accessible
> > > [ 0.460468] pci 0000:0b:02.0: [1106:3044] type 00 class 0x0c0010
> > > conventional PCI endpoint
> > > [ 0.460485] pci 0000:0b:02.0: BAR 0 [mem 0xfbeff000-0xfbeff7ff]
> > > [ 0.460495] pci 0000:0b:02.0: BAR 1 [io 0xec00-0xec7f]
> > > [ 0.460565] pci 0000:0b:02.0: supports D2
> > > [ 0.460567] pci 0000:0b:02.0: PME# supported from D2 D3hot D3cold
> > > [ 0.460650] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
> > > [ 0.460660] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window]
> > > (subtractive decode)
> > > [ 0.460662] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window]
> > > (subtractive decode)
> > > [ 0.460664] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff
> > > window] (subtractive decode)
> > > [ 0.460666] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff
> > > window] (subtractive decode)
> > > [ 0.460668] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff
> > > window] (subtractive decode)
> > > [ 0.460670] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff
> > > window] (subtractive decode)
> > > [ 0.461561] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
> > > [ 0.461631] ACPI: PCI: Interrupt link LNKB configured for IRQ 5
> > > [ 0.461700] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
> > > [ 0.461768] ACPI: PCI: Interrupt link LNKD configured for IRQ 14
> > > [ 0.461835] ACPI: PCI: Interrupt link LNKE configured for IRQ 15
> > > [ 0.461903] ACPI: PCI: Interrupt link LNKF configured for IRQ 3
> > > [ 0.461971] ACPI: PCI: Interrupt link LNKG configured for IRQ 7
> > > [ 0.462039] ACPI: PCI: Interrupt link LNKH configured for IRQ 4
> > > [ 0.462216] iommu: Default domain type: Translated
> > > [ 0.462216] iommu: DMA domain TLB invalidation policy: lazy mode
> > > [ 0.462216] SCSI subsystem initialized
> > > [ 0.462216] libata version 3.00 loaded.
> > > [ 0.462216] ACPI: bus type USB registered
> > > [ 0.462216] usbcore: registered new interface driver usbfs
> > > [ 0.462216] usbcore: registered new interface driver hub
> > > [ 0.462216] usbcore: registered new device driver usb
> > > [ 0.462216] pps_core: LinuxPPS API ver. 1 registered
> > > [ 0.462216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> > > Giometti <giometti@...ux.it>
> > > [ 0.462216] PTP clock support registered
> > > [ 0.462216] EDAC MC: Ver: 3.0.0
> > > [ 0.462216] NetLabel: Initializing
> > > [ 0.462216] NetLabel: domain hash size = 128
> > > [ 0.462216] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> > > [ 0.462216] NetLabel: unlabeled traffic allowed by default
> > > [ 0.462216] PCI: Using ACPI for IRQ routing
> > > [ 0.468990] PCI: Discovered peer bus ff
> > > [ 0.468992] PCI: root bus ff: using default resources
> > > [ 0.468994] PCI: Probing PCI hardware (bus ff)
> > > [ 0.469021] PCI host bridge to bus 0000:ff
> > > [ 0.469023] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
> > > [ 0.469026] pci_bus 0000:ff: root bus resource [mem
> > > 0x00000000-0xfffffffff]
> > > [ 0.469028] pci_bus 0000:ff: No busn resource found for root bus, will
> > > use [bus ff-ff]
> > > [ 0.469030] pci_bus 0000:ff: busn_res: can not insert [bus ff] under
> > > domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
> > > [ 0.469038] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469094] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469145] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469192] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469241] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469290] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469343] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469391] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469441] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469488] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469535] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469585] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469632] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469679] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469731] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469782] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469829] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469875] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469925] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
> > > conventional PCI endpoint
> > > [ 0.469981] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
> > > [ 0.469984] pci_bus 0000:ff: busn_res: can not insert [bus ff] under
> > > domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
> > > [ 0.469992] PCI: pci_cache_line_size set to 64 bytes
> > > [ 0.470083] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
> > > [ 0.470085] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
> > > [ 0.470108] pci 0000:04:00.0: vgaarb: setting as boot VGA device
> > > [ 0.470108] pci 0000:04:00.0: vgaarb: bridge control possible
> > > [ 0.470108] pci 0000:04:00.0: vgaarb: VGA device added:
> > > decodes=io+mem,owns=io+mem,locks=none
> > > [ 0.470108] vgaarb: loaded
> > > [ 0.470108] hpet: 4 channels of 0 reserved for per-cpu timers
> > > [ 0.470108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> > > [ 0.470108] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> > > [ 0.472412] clocksource: Switched to clocksource tsc-early
> > > [ 0.474123] VFS: Disk quotas dquot_6.6.0
> > > [ 0.474178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
> > > bytes)
> > > [ 0.474353] AppArmor: AppArmor Filesystem Enabled
> > > [ 0.474372] pnp: PnP ACPI init
> > > [ 0.474452] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
> > > [ 0.474456] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
> > > [ 0.474458] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
> > > [ 0.474460] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
> > > [ 0.474462] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be
> > > reserved
> > > [ 0.474465] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
> > > [ 0.474787] system 00:02: [io 0x0290-0x029f] has been reserved
> > > [ 0.475064] system 00:03: [io 0x04d0-0x04d1] has been reserved
> > > [ 0.475068] system 00:03: [io 0x0800-0x087f] has been reserved
> > > [ 0.475070] system 00:03: [io 0x0500-0x057f] could not be reserved
> > > [ 0.475072] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
> > > [ 0.475075] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
> > > [ 0.475077] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
> > > [ 0.475240] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
> > > [ 0.475414] system 00:05: [mem 0xfec00000-0xfec00fff] could not be
> > > reserved
> > > [ 0.475418] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
> > > [ 0.475547] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
> > > [ 0.475756] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it
> > > overlaps 0000:04:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
> > > [ 0.475794] system 00:07: [mem 0x00000000-0x0009ffff] could not be
> > > reserved
> > > [ 0.475797] system 00:07: [mem 0x000e0000-0x000fffff] could not be
> > > reserved
> > > [ 0.475799] system 00:07: [mem 0x00100000-0xbfffffff] could not be
> > > reserved
> > > [ 0.475801] system 00:07: [mem 0xfed90000-0xffffffff] could not be
> > > reserved
> > > [ 0.475968] pnp: PnP ACPI: found 8 devices
> > > [ 0.482412] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
> > > max_idle_ns: 2085701024 ns
> > > [ 0.482668] NET: Registered PF_INET protocol family
> > > [ 0.482922] IP idents hash table entries: 262144 (order: 9, 2097152
> > > bytes, linear)
> > > [ 0.487040] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5,
> > > 131072 bytes, linear)
> > > [ 0.487090] Table-perturb hash table entries: 65536 (order: 6, 262144
> > > bytes, linear)
> > > [ 0.487211] TCP established hash table entries: 131072 (order: 8, 1048576
> > > bytes, linear)
> > > [ 0.487622] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes,
> > > linear)
> > > [ 0.487923] TCP: Hash tables configured (established 131072 bind 65536)
> > > [ 0.488158] MPTCP token hash table entries: 16384 (order: 6, 393216
> > > bytes, linear)
> > > [ 0.488251] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
> > > [ 0.488324] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes,
> > > linear)
> > > [ 0.488454] NET: Registered PF_UNIX/PF_LOCAL protocol family
> > > [ 0.488463] NET: Registered PF_XDP protocol family
> > > [ 0.488480] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
> > > 0a] add_size 1000
> > > [ 0.488484] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff]
> > > to [bus 0a] add_size 200000 add_align 100000
> > > [ 0.488488] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus
> > > 09] add_size 1000
> > > [ 0.488491] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff
> > > 64bit pref] to [bus 09] add_size 200000 add_align 100000
> > > [ 0.488494] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff
> > > 64bit pref] to [bus 08] add_size 200000 add_align 100000
> > > [ 0.488497] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff
> > > 64bit pref] to [bus 07] add_size 200000 add_align 100000
> > > [ 0.488500] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff
> > > 64bit pref] to [bus 06] add_size 200000 add_align 100000
> > > [ 0.488517] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]:
> > > assigned
> > > [ 0.488520] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff
> > > 64bit pref]: assigned
> > > [ 0.488524] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff
> > > 64bit pref]: assigned
> > > [ 0.488526] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff
> > > 64bit pref]: assigned
> > > [ 0.488529] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff
> > > 64bit pref]: assigned
> > > [ 0.488532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]: assigned
> > > [ 0.488535] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]: assigned
> > > [ 0.488538] pci 0000:00:01.0: PCI bridge to [bus 01]
> > > [ 0.488548] pci 0000:03:00.0: PCI bridge to [bus 04]
> > > [ 0.488550] pci 0000:03:00.0: bridge window [io 0xa000-0xafff]
> > > [ 0.488555] pci 0000:03:00.0: bridge window [mem 0xfb700000-0xfb8fffff]
> > > [ 0.488559] pci 0000:03:00.0: bridge window [mem 0xcfe00000-0xdfffffff
> > > 64bit pref]
> > > [ 0.488564] pci 0000:02:00.0: PCI bridge to [bus 03-04]
> > > [ 0.488567] pci 0000:02:00.0: bridge window [io 0xa000-0xafff]
> > > [ 0.488571] pci 0000:02:00.0: bridge window [mem 0xfb700000-0xfb8fffff]
> > > [ 0.488575] pci 0000:02:00.0: bridge window [mem 0xcfe00000-0xdfffffff
> > > 64bit pref]
> > > [ 0.488580] pci 0000:00:03.0: PCI bridge to [bus 02-04]
> > > [ 0.488583] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
> > > [ 0.488586] pci 0000:00:03.0: bridge window [mem 0xfb600000-0xfb8fffff]
> > > [ 0.488590] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xdfffffff
> > > 64bit pref]
> > > [ 0.488594] pci 0000:00:07.0: PCI bridge to [bus 05]
> > > [ 0.488603] pci 0000:00:1c.0: PCI bridge to [bus 0a]
> > > [ 0.488605] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> > > [ 0.488609] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
> > > [ 0.488612] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff
> > > 64bit pref]
> > > [ 0.488618] pci 0000:00:1c.1: PCI bridge to [bus 09]
> > > [ 0.488620] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
> > > [ 0.488624] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbdfffff]
> > > [ 0.488628] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff
> > > 64bit pref]
> > > [ 0.488633] pci 0000:00:1c.2: PCI bridge to [bus 08]
> > > [ 0.488635] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
> > > [ 0.488639] pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
> > > [ 0.488643] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff
> > > 64bit pref]
> > > [ 0.488648] pci 0000:00:1c.4: PCI bridge to [bus 07]
> > > [ 0.488650] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
> > > [ 0.488654] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
> > > [ 0.488658] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff
> > > 64bit pref]
> > > [ 0.488663] pci 0000:00:1c.5: PCI bridge to [bus 06]
> > > [ 0.488665] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
> > > [ 0.488669] pci 0000:00:1c.5: bridge window [mem 0xfb900000-0xfb9fffff]
> > > [ 0.488673] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff
> > > 64bit pref]
> > > [ 0.488678] pci 0000:00:1e.0: PCI bridge to [bus 0b]
> > > [ 0.488681] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
> > > [ 0.488685] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
> > > [ 0.488692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> > > [ 0.488694] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> > > [ 0.488696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
> > > window]
> > > [ 0.488698] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff
> > > window]
> > > [ 0.488700] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff
> > > window]
> > > [ 0.488702] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff
> > > window]
> > > [ 0.488704] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
> > > [ 0.488705] pci_bus 0000:02: resource 1 [mem 0xfb600000-0xfb8fffff]
> > > [ 0.488707] pci_bus 0000:02: resource 2 [mem 0xcfe00000-0xdfffffff 64bit
> > > pref]
> > > [ 0.488709] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
> > > [ 0.488711] pci_bus 0000:03: resource 1 [mem 0xfb700000-0xfb8fffff]
> > > [ 0.488712] pci_bus 0000:03: resource 2 [mem 0xcfe00000-0xdfffffff 64bit
> > > pref]
> > > [ 0.488714] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
> > > [ 0.488716] pci_bus 0000:04: resource 1 [mem 0xfb700000-0xfb8fffff]
> > > [ 0.488718] pci_bus 0000:04: resource 2 [mem 0xcfe00000-0xdfffffff 64bit
> > > pref]
> > > [ 0.488720] pci_bus 0000:0a: resource 0 [io 0x1000-0x1fff]
> > > [ 0.488722] pci_bus 0000:0a: resource 1 [mem 0xc0000000-0xc01fffff]
> > > [ 0.488723] pci_bus 0000:0a: resource 2 [mem 0xfaf00000-0xfaffffff 64bit
> > > pref]
> > > [ 0.488725] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
> > > [ 0.488727] pci_bus 0000:09: resource 1 [mem 0xfbc00000-0xfbdfffff]
> > > [ 0.488728] pci_bus 0000:09: resource 2 [mem 0xc0200000-0xc03fffff 64bit
> > > pref]
> > > [ 0.488730] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
> > > [ 0.488732] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
> > > [ 0.488734] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit
> > > pref]
> > > [ 0.488736] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
> > > [ 0.488737] pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff]
> > > [ 0.488739] pci_bus 0000:07: resource 2 [mem 0xc0600000-0xc07fffff 64bit
> > > pref]
> > > [ 0.488741] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
> > > [ 0.488743] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff]
> > > [ 0.488744] pci_bus 0000:06: resource 2 [mem 0xc0800000-0xc09fffff 64bit
> > > pref]
> > > [ 0.488746] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff]
> > > [ 0.488748] pci_bus 0000:0b: resource 1 [mem 0xfbe00000-0xfbefffff]
> > > [ 0.488750] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7 window]
> > > [ 0.488751] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff window]
> > > [ 0.488753] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff
> > > window]
> > > [ 0.488755] pci_bus 0000:0b: resource 7 [mem 0x000d0000-0x000dffff
> > > window]
> > > [ 0.488757] pci_bus 0000:0b: resource 8 [mem 0xc0000000-0xdfffffff
> > > window]
> > > [ 0.488758] pci_bus 0000:0b: resource 9 [mem 0xf0000000-0xfed8ffff
> > > window]
> > > [ 0.488836] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
> > > [ 0.488838] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
> > > [ 0.490705] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
> > > [ 0.490763] PCI: CLS 256 bytes, default 64
> > > [ 0.490837] DMAR: Host address width 39
> > > [ 0.490840] DMAR: DRHD base: 0x000000fbfff000 flags: 0x0
> > > [ 0.490855] DMAR: dmar0: reg_base_addr fbfff000 ver 1:0 cap
> > > c9008010e60262 ecap f0207a
> > > [ 0.490859] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
> > > [ 0.490868] DMAR: dmar1: reg_base_addr fbffe000 ver 1:0 cap
> > > c90780106f0462 ecap f020fe
> > > [ 0.490872] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
> > > [ 0.490874] DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff
> > > [ 0.490876] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR
> > > [0x00000000bf7dc000-0x00000000bf7dbfff]
> > > BIOS vendor: American Megatrends Inc.; Ver: 2209 ; Product
> > > Version: System Version
> > > [ 0.490885] DMAR: ATSR flags: 0x0
> > > [ 0.490916] Trying to unpack rootfs image as initramfs...
> > > [ 0.490924] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > > [ 0.490926] software IO TLB: mapped [mem
> > > 0x00000000bb780000-0x00000000bf780000] (64MB)
> > > [ 0.498853] Initialise system trusted keyrings
> > > [ 0.498871] Key type blacklist registered
> > > [ 0.498929] workingset: timestamp_bits=36 max_order=22 bucket_order=0
> > > [ 0.498939] zbud: loaded
> > > [ 0.500605] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> > > [ 0.500783] fuse: init (API version 7.40)
> > > [ 0.501317] integrity: Platform Keyring initialized
> > > [ 0.518817] Key type asymmetric registered
> > > [ 0.518823] Asymmetric key parser 'x509' registered
> > > [ 0.518900] Block layer SCSI generic (bsg) driver version 0.4 loaded
> > > (major 243)
> > > [ 0.518995] io scheduler mq-deadline registered
> > > [ 0.519607] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
> > > [ 0.519816] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
> > > [ 0.520733] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> > > [ 0.520780] Driver vt8623fb not loading because of nomodeset parameter
> > > [ 0.521646] input: Power Button as
> > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> > > [ 0.521681] ACPI: button: Power Button [PWRB]
> > > [ 0.521720] input: Power Button as
> > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> > > [ 0.521846] ACPI: button: Power Button [PWRF]
> > > [ 0.523498] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> > > [ 0.527493] Linux agpgart interface v0.103
> > > [ 0.532004] loop: module loaded
> > > [ 0.532510] tun: Universal TUN/TAP device driver, 1.6
> > > [ 0.532598] PPP generic driver version 2.4.2
> > > [ 0.532913] VFIO - User Level meta-driver version: 0.3
> > > [ 0.533261] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> > > [ 0.533272] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
> > > number 1
> > > [ 0.533282] uhci_hcd 0000:00:1a.0: detected 2 ports
> > > [ 0.533318] uhci_hcd 0000:00:1a.0: irq 16, io port 0x00009800
> > > [ 0.533385] usb usb1: New USB device found, idVendor=1d6b,
> > > idProduct=0001, bcdDevice= 6.11
> > > [ 0.533388] usb usb1: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1
> > > [ 0.533390] usb usb1: Product: UHCI Host Controller
> > > [ 0.533392] usb usb1: Manufacturer: Linux 6.11.0 uhci_hcd
> > > [ 0.533393] usb usb1: SerialNumber: 0000:00:1a.0
> > > [ 0.533563] hub 1-0:1.0: USB hub found
> > > [ 0.533572] hub 1-0:1.0: 2 ports detected
> > > [ 0.533852] ehci-pci 0000:00:1a.7: EHCI Host Controller
> > > [ 0.533861] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus
> > > number 2
> > > [ 0.533874] ehci-pci 0000:00:1a.7: debug port 1
> > > [ 0.537796] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfb5ff000
> > > [ 0.553037] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> > > [ 0.553115] usb usb2: New USB device found, idVendor=1d6b,
> > > idProduct=0002, bcdDevice= 6.11
> > > [ 0.553119] usb usb2: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1
> > > [ 0.553121] usb usb2: Product: EHCI Host Controller
> > > [ 0.553122] usb usb2: Manufacturer: Linux 6.11.0 ehci_hcd
> > > [ 0.553124] usb usb2: SerialNumber: 0000:00:1a.7
> > > [ 0.553411] hub 2-0:1.0: USB hub found
> > > [ 0.553424] hub 2-0:1.0: 6 ports detected
> > > [ 0.581085] hub 1-0:1.0: USB hub found
> > > [ 0.581097] hub 1-0:1.0: 2 ports detected
> > > [ 0.581279] ehci-pci 0000:00:1d.7: EHCI Host Controller
> > > [ 0.581289] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus
> > > number 3
> > > [ 0.581304] ehci-pci 0000:00:1d.7: debug port 1
> > > [ 0.585225] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb5fe000
> > > [ 0.601021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> > > [ 0.601099] usb usb3: New USB device found, idVendor=1d6b,
> > > idProduct=0002, bcdDevice= 6.11
> > > [ 0.601103] usb usb3: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1
> > > [ 0.601105] usb usb3: Product: EHCI Host Controller
> > > [ 0.601107] usb usb3: Manufacturer: Linux 6.11.0 ehci_hcd
> > > [ 0.601108] usb usb3: SerialNumber: 0000:00:1d.7
> > > [ 0.601354] hub 3-0:1.0: USB hub found
> > > [ 0.601366] hub 3-0:1.0: 6 ports detected
> > > [ 0.601649] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> > > [ 0.601659] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
> > > number 4
> > > [ 0.601668] uhci_hcd 0000:00:1a.1: detected 2 ports
> > > [ 0.601701] uhci_hcd 0000:00:1a.1: irq 21, io port 0x00009880
> > > [ 0.601762] usb usb4: New USB device found, idVendor=1d6b,
> > > idProduct=0001, bcdDevice= 6.11
> > > [ 0.601765] usb usb4: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1
> > > [ 0.601767] usb usb4: Product: UHCI Host Controller
> > > [ 0.601768] usb usb4: Manufacturer: Linux 6.11.0 uhci_hcd
> > > [ 0.601770] usb usb4: SerialNumber: 0000:00:1a.1
> > > [ 0.601959] hub 4-0:1.0: USB hub found
> > > [ 0.601971] hub 4-0:1.0: 2 ports detected
> > > [ 0.602279] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> > > [ 0.602285] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
> > > number 5
> > > [ 0.602292] uhci_hcd 0000:00:1a.2: detected 2 ports
> > > [ 0.602319] uhci_hcd 0000:00:1a.2: irq 19, io port 0x00009c00
> > > [ 0.602378] usb usb5: New USB device found, idVendor=1d6b,
> > > idProduct=0001, bcdDevice= 6.11
> > > [ 0.602381] usb usb5: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1
> > > [ 0.602383] usb usb5: Product: UHCI Host Controller
> > > [ 0.602385] usb usb5: Manufacturer: Linux 6.11.0 uhci_hcd
> > > [ 0.602387] usb usb5: SerialNumber: 0000:00:1a.2
> > > [ 0.602571] hub 5-0:1.0: USB hub found
> > > [ 0.602582] hub 5-0:1.0: 2 ports detected
> > > [ 0.602821] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > > [ 0.602827] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
> > > number 6
> > > [ 0.602834] uhci_hcd 0000:00:1d.0: detected 2 ports
> > > [ 0.602852] uhci_hcd 0000:00:1d.0: irq 23, io port 0x00009080
> > > [ 0.602905] usb usb6: New USB device found, idVendor=1d6b,
> > > idProduct=0001, bcdDevice= 6.11
> > > [ 0.602908] usb usb6: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1
> > > [ 0.602910] usb usb6: Product: UHCI Host Controller
> > > [ 0.602911] usb usb6: Manufacturer: Linux 6.11.0 uhci_hcd
> > > [ 0.602913] usb usb6: SerialNumber: 0000:00:1d.0
> > > [ 0.603096] hub 6-0:1.0: USB hub found
> > > [ 0.603108] hub 6-0:1.0: 2 ports detected
> > > [ 0.603355] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > > [ 0.603366] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
> > > number 7
> > > [ 0.603373] uhci_hcd 0000:00:1d.1: detected 2 ports
> > > [ 0.603390] uhci_hcd 0000:00:1d.1: irq 19, io port 0x00009400
> > > [ 0.603444] usb usb7: New USB device found, idVendor=1d6b,
> > > idProduct=0001, bcdDevice= 6.11
> > > [ 0.603447] usb usb7: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1
> > > [ 0.603449] usb usb7: Product: UHCI Host Controller
> > > [ 0.603450] usb usb7: Manufacturer: Linux 6.11.0 uhci_hcd
> > > [ 0.603452] usb usb7: SerialNumber: 0000:00:1d.1
> > > [ 0.603636] hub 7-0:1.0: USB hub found
> > > [ 0.603648] hub 7-0:1.0: 2 ports detected
> > > [ 0.603900] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > > [ 0.603907] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
> > > number 8
> > > [ 0.603913] uhci_hcd 0000:00:1d.2: detected 2 ports
> > > [ 0.603931] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00009480
> > > [ 0.603984] usb usb8: New USB device found, idVendor=1d6b,
> > > idProduct=0001, bcdDevice= 6.11
> > > [ 0.603987] usb usb8: New USB device strings: Mfr=3, Product=2,
> > > SerialNumber=1
> > > [ 0.603989] usb usb8: Product: UHCI Host Controller
> > > [ 0.603991] usb usb8: Manufacturer: Linux 6.11.0 uhci_hcd
> > > [ 0.603992] usb usb8: SerialNumber: 0000:00:1d.2
> > > [ 0.604175] hub 8-0:1.0: USB hub found
> > > [ 0.604187] hub 8-0:1.0: 2 ports detected
> > > [ 0.604507] i8042: PNP: No PS/2 controller found.
> > > [ 0.604509] i8042: Probing ports directly.
> > > [ 0.607314] serio: i8042 KBD port at 0x60,0x64 irq 1
> > > [ 0.607322] serio: i8042 AUX port at 0x60,0x64 irq 12
> > > [ 0.607576] mousedev: PS/2 mouse device common for all mice
> > > [ 0.607851] rtc_cmos 00:01: RTC can wake from S4
> > > [ 0.608175] rtc_cmos 00:01: registered as rtc0
> > > [ 0.608206] rtc_cmos 00:01: setting system clock to 2024-09-16T20:18:41
> > > UTC (1726517921)
> > > [ 0.608248] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram,
> > > hpet irqs
> > > [ 0.608269] i2c_dev: i2c /dev entries driver
> > > [ 0.609016] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled.
> > > Duplicate IMA measurements will not be recorded in the IMA log.
> > > [ 0.609054] device-mapper: uevent: version 1.0.3
> > > [ 0.609150] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised:
> > > dm-devel@...ts.linux.dev
> > > [ 0.609178] platform eisa.0: Probing EISA bus 0
> > > [ 0.609181] platform eisa.0: EISA: Cannot allocate resource for mainboard
> > > [ 0.609183] platform eisa.0: Cannot allocate resource for EISA slot 1
> > > [ 0.609185] platform eisa.0: Cannot allocate resource for EISA slot 2
> > > [ 0.609186] platform eisa.0: Cannot allocate resource for EISA slot 3
> > > [ 0.609188] platform eisa.0: Cannot allocate resource for EISA slot 4
> > > [ 0.609189] platform eisa.0: Cannot allocate resource for EISA slot 5
> > > [ 0.609191] platform eisa.0: Cannot allocate resource for EISA slot 6
> > > [ 0.609192] platform eisa.0: Cannot allocate resource for EISA slot 7
> > > [ 0.609194] platform eisa.0: Cannot allocate resource for EISA slot 8
> > > [ 0.609195] platform eisa.0: EISA: Detected 0 cards
> > > [ 0.609198] intel_pstate: CPU model not supported
> > > [ 0.609512] ledtrig-cpu: registered to indicate activity on CPUs
> > > [ 0.609564] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
> > > [ 0.609566] vesafb: scrolling: redraw
> > > [ 0.609567] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
> > > [ 0.609588] vesafb: framebuffer at 0xd0000000, mapped to
> > > 0x(____ptrval____), using 8128k, total 8128k
> > > [ 0.609716] fbcon: Deferring console take-over
> > > [ 0.609720] fb0: VESA VGA frame buffer device
> > > [ 0.609756] fujitsu_tablet: Unknown (using defaults)
> > > [ 0.609870] drop_monitor: Initializing network drop monitor service
> > > [ 0.610200] NET: Registered PF_INET6 protocol family
> > > [ 0.809011] usb 2-5: new high-speed USB device number 2 using ehci-pci
> > > [ 0.965402] usb 2-5: New USB device found, idVendor=0409, idProduct=005a,
> > > bcdDevice= 1.00
> > > [ 0.965410] usb 2-5: New USB device strings: Mfr=0, Product=0,
> > > SerialNumber=0
> > > [ 0.965833] hub 2-5:1.0: USB hub found
> > > [ 0.966029] hub 2-5:1.0: 4 ports detected
> > > [ 1.060999] usb 6-1: new full-speed USB device number 2 using uhci_hcd
> > > [ 1.254086] usb 6-1: New USB device found, idVendor=1784, idProduct=0001,
> > > bcdDevice= 0.00
> > > [ 1.254094] usb 6-1: New USB device strings: Mfr=1, Product=2,
> > > SerialNumber=3
> > > [ 1.254096] usb 6-1: Product: eHome Infrared Transceiver
> > > [ 1.254098] usb 6-1: Manufacturer: Topseed
> > > [ 1.254100] usb 6-1: SerialNumber: TS000IUz
> > > [ 1.256907] usb 2-5.1: new low-speed USB device number 3 using ehci-pci
> > > [ 1.371648] usb 2-5.1: New USB device found, idVendor=046d,
> > > idProduct=c317, bcdDevice= 0.70
> > > [ 1.371656] usb 2-5.1: New USB device strings: Mfr=1, Product=2,
> > > SerialNumber=0
> > > [ 1.371658] usb 2-5.1: Product: USB Multimedia Keyboard
> > > [ 1.371660] usb 2-5.1: Manufacturer: Logitech
> > > [ 1.448914] usb 2-5.2: new high-speed USB device number 4 using ehci-pci
> > > [ 1.525172] tsc: Refined TSC clocksource calibration: 2672.735 MHz
> > > [ 1.525186] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
> > > 0x2686a22b34e, max_idle_ns: 440795332917 ns
> > > [ 1.525285] clocksource: Switched to clocksource tsc
> > > [ 1.558738] usb 2-5.2: New USB device found, idVendor=1532,
> > > idProduct=0e05, bcdDevice= 8.21
> > > [ 1.558746] usb 2-5.2: New USB device strings: Mfr=1, Product=2,
> > > SerialNumber=0
> > > [ 1.558748] usb 2-5.2: Product: Razer Kiyo Pro
> > > [ 1.558750] usb 2-5.2: Manufacturer: Razer Inc
> > > [ 1.636911] usb 2-5.4: new high-speed USB device number 5 using ehci-pci
> > > [ 1.757135] usb 2-5.4: New USB device found, idVendor=0bda,
> > > idProduct=2838, bcdDevice= 1.00
> > > [ 1.757143] usb 2-5.4: New USB device strings: Mfr=1, Product=2,
> > > SerialNumber=3
> > > [ 1.757145] usb 2-5.4: Product: RTL2838UHIDIR
> > > [ 1.757147] usb 2-5.4: Manufacturer: Realtek
> > > [ 1.757148] usb 2-5.4: SerialNumber: 00000001
> > > [ 1.896915] usb 7-1: new low-speed USB device number 2 using uhci_hcd
> > > [ 2.090985] usb 7-1: New USB device found, idVendor=1c4f, idProduct=0034,
> > > bcdDevice= 1.10
> > > [ 2.090993] usb 7-1: New USB device strings: Mfr=1, Product=2,
> > > SerialNumber=0
> > > [ 2.090995] usb 7-1: Product: Usb Mouse
> > > [ 2.090997] usb 7-1: Manufacturer: SIGMACHIP
> > > [ 2.520914] usb 3-4: new high-speed USB device number 4 using ehci-pci
> > > [ 2.695073] usb 3-4: New USB device found, idVendor=0b05, idProduct=1784,
> > > bcdDevice= 1.01
> > > [ 2.695080] usb 3-4: New USB device strings: Mfr=1, Product=2,
> > > SerialNumber=3
> > > [ 2.695083] usb 3-4: Product: 802.11 n WLAN
> > > [ 2.695085] usb 3-4: Manufacturer: Ralink
> > > [ 2.695086] usb 3-4: SerialNumber: 1.0
> > > [ 6.983494] Freeing initrd memory: 732708K
> > > [ 6.993078] Segment Routing with IPv6
> > > [ 6.993112] In-situ OAM (IOAM) with IPv6
> > > [ 6.993166] NET: Registered PF_PACKET protocol family
> > > [ 6.993452] Key type dns_resolver registered
> > > [ 6.994849] microcode: Current revision: 0x00000012
> > > [ 6.994854] microcode: Updated early from: 0x00000010
> > > [ 6.995662] IPI shorthand broadcast: enabled
> > > [ 6.998021] sched_clock: Marking stable (6996004567,
> > > 824148)->(7068598070, -71769355)
> > > [ 6.998330] registered taskstats version 1
> > > [ 6.999038] Loading compiled-in X.509 certificates
> > > [ 7.000201] Loaded X.509 cert 'Build time autogenerated kernel key:
> > > 8b9c4d5ea71199831d97e735201ace9ff8457a95'
> > > [ 7.003218] Demotion targets for Node 0: null
> > > [ 7.003551] Key type .fscrypt registered
> > > [ 7.003556] Key type fscrypt-provisioning registered
> > > [ 7.015077] cryptd: max_cpu_qlen set to 1000
> > > [ 7.055597] Key type encrypted registered
> > > [ 7.055608] AppArmor: AppArmor sha256 policy hashing enabled
> > > [ 7.055626] ima: No TPM chip found, activating TPM-bypass!
> > > [ 7.055639] Loading compiled-in module X.509 certificates
> > > [ 7.056587] Loaded X.509 cert 'Build time autogenerated kernel key:
> > > 8b9c4d5ea71199831d97e735201ace9ff8457a95'
> > > [ 7.056590] ima: Allocated hash algorithm: sha1
> > > [ 7.056598] ima: No architecture policies found
> > > [ 7.056614] evm: Initialising EVM extended attributes:
> > > [ 7.056615] evm: security.selinux
> > > [ 7.056616] evm: security.SMACK64
> > > [ 7.056617] evm: security.SMACK64EXEC
> > > [ 7.056618] evm: security.SMACK64TRANSMUTE
> > > [ 7.056619] evm: security.SMACK64MMAP
> > > [ 7.056620] evm: security.apparmor
> > > [ 7.056621] evm: security.ima
> > > [ 7.056622] evm: security.capability
> > > [ 7.056623] evm: HMAC attrs: 0x1
> > > [ 7.057049] PM: Magic number: 8:614:346
> > > [ 7.057098] tty tty63: hash matches
> > > [ 7.061477] RAS: Correctable Errors collector initialized.
> > > [ 7.061561] clk: Disabling unused clocks
> > > [ 7.061564] PM: genpd: Disabling unused power domains
> > > [ 7.066690] Freeing unused decrypted memory: 2036K
> > > [ 7.067974] Freeing unused kernel image (initmem) memory: 4860K
> > > [ 7.068170] Write protecting the kernel read-only data: 28672k
> > > [ 7.068986] Freeing unused kernel image (rodata/data gap) memory: 864K
> > > [ 7.160616] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> > > [ 7.160704] x86/mm: Checking user space page tables
> > > [ 7.221245] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> > > [ 7.221251] Run /init as init process
> > > [ 7.221253] with arguments:
> > > [ 7.221254] /init
> > > [ 7.221255] splash
> > > [ 7.221256] with environment:
> > > [ 7.221257] HOME=/
> > > [ 7.221258] TERM=linux
> > > [ 7.221259] BOOT_IMAGE=/vmlinuz-6.11.0
> > > [ 7.375505] ACPI Warning: SystemIO range
> > > 0x0000000000000828-0x000000000000082F conflicts with OpRegion
> > > 0x0000000000000800-0x000000000000084F (\PMRG) (20240322/utaddress-204)
> > > [ 7.375517] ACPI: OSL: Resource conflict; ACPI support missing from
> > > driver?
> > > [ 7.375522] ACPI Warning: SystemIO range
> > > 0x0000000000000530-0x000000000000053F conflicts with OpRegion
> > > 0x0000000000000500-0x000000000000053F (\GPS0) (20240322/utaddress-204)
> > > [ 7.375529] ACPI: OSL: Resource conflict; ACPI support missing from
> > > driver?
> > > [ 7.375531] ACPI Warning: SystemIO range
> > > 0x0000000000000500-0x000000000000052F conflicts with OpRegion
> > > 0x0000000000000500-0x000000000000053F (\GPS0) (20240322/utaddress-204)
> > > [ 7.375537] ACPI: OSL: Resource conflict; ACPI support missing from
> > > driver?
> > > [ 7.375538] lpc_ich: Resource conflict(s) found affecting gpio_ich
> > > [ 7.384601] sky2: driver version 1.30
> > > [ 7.384756] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
> > > [ 7.385087] sky2 0000:08:00.0 eth0: addr 00:23:54:9e:5b:d0
> > > [ 7.385184] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
> > > [ 7.385497] sky2 0000:06:00.0 eth1: addr 00:23:54:9e:5b:cf
> > > [ 7.390107] ahci 0000:00:1f.2: version 3.0
> > > [ 7.391435] ACPI Warning: SystemIO range
> > > 0x0000000000000400-0x000000000000041F conflicts with OpRegion
> > > 0x0000000000000400-0x000000000000040F (\SMRG) (20240322/utaddress-204)
> > > [ 7.391445] ACPI: OSL: Resource conflict; ACPI support missing from
> > > driver?
> > > [ 7.392355] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
> > > [ 7.392400] ahci 0000:00:1f.2: AHCI vers 0001.0200, 32 command slots, 3
> > > Gbps, SATA mode
> > > [ 7.392405] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
> > > [ 7.392408] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp
> > > pio slum part ccc ems sxs
> > > [ 7.397468] hid: raw HID events driver (C) Jiri Kosina
> > > [ 7.438438] sky2 0000:08:00.0 enp8s0: renamed from eth0
> > > [ 7.438941] sky2 0000:06:00.0 enp6s0: renamed from eth1
> > > [ 7.446100] usbcore: registered new interface driver usbhid
> > > [ 7.446103] usbhid: USB HID core driver
> > > [ 7.449704] scsi host0: ahci
> > > [ 7.450043] scsi host1: ahci
> > > [ 7.450177] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.7/usb2/2-5/2-5.1/2-5.1:1.0/0003:046D:C317.0001/input/input5
> > > [ 7.450206] scsi host2: ahci
> > > [ 7.450384] scsi host3: ahci
> > > [ 7.450534] scsi host4: ahci
> > > [ 7.450680] scsi host5: ahci
> > > [ 7.450765] ata1: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc100
> > > irq 29 lpm-pol 0
> > > [ 7.450769] ata2: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc180
> > > irq 29 lpm-pol 0
> > > [ 7.450772] ata3: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc200
> > > irq 29 lpm-pol 0
> > > [ 7.450775] ata4: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc280
> > > irq 29 lpm-pol 0
> > > [ 7.450778] ata5: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc300
> > > irq 29 lpm-pol 0
> > > [ 7.450781] ata6: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc380
> > > irq 29 lpm-pol 0
> > > [ 7.509365] hid-generic 0003:046D:C317.0001: input,hidraw0: USB HID v1.10
> > > Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:1a.7-5.1/input0
> > > [ 7.509615] input: Logitech USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:1a.7/usb2/2-5/2-5.1/2-5.1:1.1/0003:046D:C317.0002/input/input6
> > > [ 7.512965] firewire_ohci 0000:0b:02.0: added OHCI v1.10 device as card
> > > 0, 4 IR + 8 IT contexts, quirks 0x11
> > > [ 7.525915] ACPI: bus type drm_connector registered
> > > [ 7.569198] input: Logitech USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.7/usb2/2-5/2-5.1/2-5.1:1.1/0003:046D:C317.0002/input/input7
> > > [ 7.569501] hid-generic 0003:046D:C317.0002: input,hidraw1: USB HID v1.10
> > > Device [Logitech USB Multimedia Keyboard] on usb-0000:00:1a.7-5.1/input1
> > > [ 7.569707] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:1C4F:0034.0003/input/input8
> > > [ 7.570110] hid-generic 0003:1C4F:0034.0003: input,hidraw2: USB HID v1.10
> > > Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.1-1/input0
> > > [ 7.924893] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > > [ 7.925710] ata1.00: ATA-10: WD Blue SA510 2.5 2TB, 530309WD, max
> > > UDMA/133
> > > [ 7.925801] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32),
> > > AA
> > > [ 7.926415] ata1.00: Features: Dev-Sleep
> > > [ 7.927326] ata1.00: configured for UDMA/133
> > > [ 7.927586] scsi 0:0:0:0: Direct-Access ATA WD Blue SA510 2.
> > > 09WD PQ: 0 ANSI: 5
> > > [ 7.928008] scsi 0:0:0:0: Attached scsi generic sg0 type 0
> > > [ 8.025099] firewire_core 0000:0b:02.0: created device fw0: GUID
> > > 001e8c0001b0584a, S400
> > > [ 8.404993] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > > [ 8.416099] ata2.00: ATA-8: Corsair Force 3 SSD, 1.3.2, max UDMA/133
> > > [ 8.416606] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32),
> > > AA
> > > [ 8.426528] ata2.00: configured for UDMA/133
> > > [ 8.426791] scsi 1:0:0:0: Direct-Access ATA Corsair Force 3
> > > 2 PQ: 0 ANSI: 5
> > > [ 8.427456] scsi 1:0:0:0: Attached scsi generic sg1 type 0
> > > [ 8.904925] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > > [ 8.905740] ata3.00: ATA-10: WD Blue SA510 2.5 2TB, 530309WD, max
> > > UDMA/133
> > > [ 8.905838] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32),
> > > AA
> > > [ 8.906448] ata3.00: Features: Dev-Sleep
> > > [ 8.907336] ata3.00: configured for UDMA/133
> > > [ 8.907542] scsi 2:0:0:0: Direct-Access ATA WD Blue SA510 2.
> > > 09WD PQ: 0 ANSI: 5
> > > [ 8.908069] scsi 2:0:0:0: Attached scsi generic sg2 type 0
> > > [ 9.392962] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > > [ 9.394169] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
> > > [ 9.394176] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32)
> > > [ 9.395560] ata4.00: configured for UDMA/133
> > > [ 9.395767] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ:
> > > 0 ANSI: 5
> > > [ 9.396339] scsi 3:0:0:0: Attached scsi generic sg3 type 0
> > > [ 9.876891] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > > [ 9.877133] ata5.00: ATA-10: KINGSTON SA400S37480G, SBFKK1B3, max
> > > UDMA/133
> > > [ 9.877216] ata5.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
> > > [ 9.877559] ata5.00: configured for UDMA/133
> > > [ 9.877838] scsi 4:0:0:0: Direct-Access ATA KINGSTON SA400S3
> > > K1B3 PQ: 0 ANSI: 5
> > > [ 9.878294] scsi 4:0:0:0: Attached scsi generic sg4 type 0
> > > [ 10.352870] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > > [ 10.354014] ata6.00: ATAPI: DRW-24F1ST d, 2.00, max UDMA/133
> > > [ 10.355420] ata6.00: configured for UDMA/133
> > > [ 10.358873] scsi 5:0:0:0: CD-ROM ASUS DRW-24F1ST d 2.00
> > > PQ: 0 ANSI: 5
> > > [ 10.463913] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram
> > > cd/rw xa/form2 cdda tray
> > > [ 10.463919] cdrom: Uniform CD-ROM driver Revision: 3.20
> > > [ 10.501960] sr 5:0:0:0: Attached scsi CD-ROM sr0
> > > [ 10.502081] sr 5:0:0:0: Attached scsi generic sg5 type 5
> > > [ 10.507297] scsi host6: pata_marvell
> > > [ 10.507511] scsi host7: pata_marvell
> > > [ 10.507593] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400
> > > irq 16 lpm-pol 0
> > > [ 10.507596] ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408
> > > irq 16 lpm-pol 0
> > > [ 10.514525] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00
> > > TB/1.82 TiB)
> > > [ 10.514542] sd 0:0:0:0: [sda] Write Protect is off
> > > [ 10.514546] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > > [ 10.514567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> > > doesn't support DPO or FUA
> > > [ 10.514570] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120
> > > GB/112 GiB)
> > > [ 10.514587] sd 1:0:0:0: [sdb] Write Protect is off
> > > [ 10.514591] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> > > [ 10.514610] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
> > > [ 10.514610] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00
> > > TB/1.82 TiB)
> > > [ 10.514618] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
> > > doesn't support DPO or FUA
> > > [ 10.514622] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500
> > > GB/466 GiB)
> > > [ 10.514623] sd 2:0:0:0: [sdc] Write Protect is off
> > > [ 10.514627] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> > > [ 10.514639] sd 3:0:0:0: [sdd] Write Protect is off
> > > [ 10.514643] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> > > [ 10.514649] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
> > > doesn't support DPO or FUA
> > > [ 10.514650] sd 4:0:0:0: [sde] 937703088 512-byte logical blocks: (480
> > > GB/447 GiB)
> > > [ 10.514659] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
> > > [ 10.514672] sd 4:0:0:0: [sde] Write Protect is off
> > > [ 10.514673] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
> > > doesn't support DPO or FUA
> > > [ 10.514677] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
> > > [ 10.514690] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
> > > [ 10.514706] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled,
> > > doesn't support DPO or FUA
> > > [ 10.514726] sd 3:0:0:0: [sdd] Preferred minimum I/O size 512 bytes
> > > [ 10.514747] sd 4:0:0:0: [sde] Preferred minimum I/O size 512 bytes
> > > [ 10.557486] sde: sde1
> > > [ 10.557579] sd 4:0:0:0: [sde] Attached SCSI disk
> > > [ 10.557928] sda: sda1
> > > [ 10.557999] sd 0:0:0:0: [sda] Attached SCSI disk
> > > [ 10.558245] sd 2:0:0:0: [sdc] Attached SCSI disk
> > > [ 10.560449] sdb: sdb1 sdb2 sdb3
> > > [ 10.560883] sd 1:0:0:0: [sdb] Attached SCSI disk
> > > [ 10.602620] sdd: sdd1
> > > [ 10.602860] sd 3:0:0:0: [sdd] Attached SCSI disk
> > > [ 18.784958] random: crng init done
> > > [ 24.072890] raid6: sse2x4 gen() 9257 MB/s
> > > [ 24.140893] raid6: sse2x2 gen() 11781 MB/s
> > > [ 24.208892] raid6: sse2x1 gen() 9633 MB/s
> > > [ 24.208894] raid6: using algorithm sse2x2 gen() 11781 MB/s
> > > [ 24.276889] raid6: .... xor() 7155 MB/s, rmw enabled
> > > [ 24.276891] raid6: using ssse3x2 recovery algorithm
> > > [ 24.279508] xor: measuring software checksum speed
> > > [ 24.280148] prefetch64-sse : 15495 MB/sec
> > > [ 24.280906] generic_sse : 13259 MB/sec
> > > [ 24.280908] xor: using function: prefetch64-sse (15495 MB/sec)
> > > [ 24.283562] async_tx: api initialized (async)
> > > [ 24.888184] Btrfs loaded, zoned=yes, fsverity=yes
> > > [ 25.121189] EXT4-fs (sde1): mounted filesystem
> > > 94072726-5fed-439f-a496-8e6aaa88617e ro with ordered data mode. Quota mode:
> > > none.
> > > [ 25.650104] systemd[1]: Inserted module 'autofs4'
> > > [ 25.720961] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode
> > > (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS
> > > +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD
> > > +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ
> > > +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
> > > [ 25.721115] systemd[1]: Detected architecture x86-64.
> > > [ 26.209831] systemd[1]: Configuration file
> > > /run/systemd/system/netplan-ovs-cleanup.service is marked
> > > world-inaccessible. This has no effect as configuration data is accessible
> > > via APIs without restrictions. Proceeding anyway.
> > > [ 26.282129] systemd[1]: Accepting user/group name '${GNUNET_USER}', which
> > > does not match strict user/group name rules.
> > > [ 26.341173] systemd[1]: Queued start job for default target Graphical
> > > Interface.
> > > [ 26.382658] systemd[1]: Created slice Slice /system/modprobe.
> > > [ 26.383229] systemd[1]: Created slice Slice /system/systemd-fsck.
> > > [ 26.383636] systemd[1]: Created slice User and Session Slice.
> > > [ 26.383727] systemd[1]: Started Forward Password Requests to Wall
> > > Directory Watch.
> > > [ 26.383934] systemd[1]: Set up automount Arbitrary Executable File
> > > Formats File System Automount Point.
> > > [ 26.384053] systemd[1]: Reached target User and Group Name Lookups.
> > > [ 26.384087] systemd[1]: Reached target Slice Units.
> > > [ 26.384122] systemd[1]: Reached target Local Verity Protected Volumes.
> > > [ 26.384233] systemd[1]: Listening on Device-mapper event daemon FIFOs.
> > > [ 26.384385] systemd[1]: Listening on LVM2 poll daemon socket.
> > > [ 26.390357] systemd[1]: Listening on RPCbind Server Activation Socket.
> > > [ 26.390560] systemd[1]: Listening on Syslog Socket.
> > > [ 26.392228] systemd[1]: Listening on Process Core Dump Socket.
> > > [ 26.392358] systemd[1]: Listening on fsck to fsckd communication Socket.
> > > [ 26.392444] systemd[1]: Listening on initctl Compatibility Named Pipe.
> > > [ 26.392728] systemd[1]: Listening on Journal Audit Socket.
> > > [ 26.392878] systemd[1]: Listening on Journal Socket (/dev/log).
> > > [ 26.393048] systemd[1]: Listening on Journal Socket.
> > > [ 26.393622] systemd[1]: Listening on udev Control Socket.
> > > [ 26.393770] systemd[1]: Listening on udev Kernel Socket.
> > > [ 26.394928] systemd[1]: Mounting Huge Pages File System...
> > > [ 26.396045] systemd[1]: Mounting POSIX Message Queue File System...
> > > [ 26.397206] systemd[1]: Mounting Kernel Debug File System...
> > > [ 26.398341] systemd[1]: Mounting Kernel Trace File System...
> > > [ 26.400711] systemd[1]: Starting Journal Service...
> > > [ 26.400852] systemd[1]: Condition check resulted in Kernel Module
> > > supporting RPCSEC_GSS being skipped.
> > > [ 26.400981] systemd[1]: Finished Availability of block devices.
> > > [ 26.402714] systemd[1]: Starting Set the console keyboard layout...
> > > [ 26.403977] systemd[1]: Starting Create List of Static Device Nodes...
> > > [ 26.405164] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots
> > > etc. using dmeventd or progress polling...
> > > [ 26.406446] systemd[1]: Starting Load Kernel Module configfs...
> > > [ 26.408022] systemd[1]: Starting Load Kernel Module drm...
> > > [ 26.409876] systemd[1]: Starting Load Kernel Module efi_pstore...
> > > [ 26.411397] systemd[1]: Starting Load Kernel Module fuse...
> > > [ 26.411770] systemd[1]: Condition check resulted in File System Check on
> > > Root Device being skipped.
> > > [ 26.419152] systemd[1]: Starting Load Kernel Modules...
> > > [ 26.420372] systemd[1]: Starting Remount Root and Kernel File Systems...
> > > [ 26.421670] systemd[1]: Starting Coldplug All udev Devices...
> > > [ 26.424102] systemd[1]: Mounted Huge Pages File System.
> > > [ 26.424285] systemd[1]: Mounted POSIX Message Queue File System.
> > > [ 26.424439] systemd[1]: Mounted Kernel Debug File System.
> > > [ 26.424592] systemd[1]: Mounted Kernel Trace File System.
> > > [ 26.425138] systemd[1]: Finished Create List of Static Device Nodes.
> > > [ 26.425552] systemd[1]: modprobe@...figfs.service: Deactivated
> > > successfully.
> > > [ 26.425869] systemd[1]: Finished Load Kernel Module configfs.
> > > [ 26.426221] systemd[1]: modprobe@....service: Deactivated successfully.
> > > [ 26.426531] systemd[1]: Finished Load Kernel Module drm.
> > > [ 26.426889] systemd[1]: modprobe@...e.service: Deactivated successfully.
> > > [ 26.427195] systemd[1]: Finished Load Kernel Module fuse.
> > > [ 26.428523] systemd[1]: Mounting FUSE Control File System...
> > > [ 26.429778] systemd[1]: Mounting Kernel Configuration File System...
> > > [ 26.431223] systemd[1]: Mounted FUSE Control File System.
> > > [ 26.432057] systemd[1]: Mounted Kernel Configuration File System.
> > > [ 26.448406] systemd[1]: modprobe@..._pstore.service: Deactivated
> > > successfully.
> > > [ 26.448945] systemd[1]: Finished Load Kernel Module efi_pstore.
> > > [ 26.469212] EXT4-fs (sde1): re-mounted
> > > 94072726-5fed-439f-a496-8e6aaa88617e r/w. Quota mode: none.
> > > [ 26.471407] systemd[1]: Finished Remount Root and Kernel File Systems.
> > > [ 26.471675] systemd[1]: Condition check resulted in Platform Persistent
> > > Storage Archival being skipped.
> > > [ 26.473420] systemd[1]: Starting Load/Save Random Seed...
> > > [ 26.475161] systemd[1]: Starting Create System Users...
> > > [ 26.483026] lp: driver loaded but no devices found
> > > [ 26.493865] ppdev: user-space parallel port driver
> > > [ 26.502393] systemd[1]: Finished Load/Save Random Seed.
> > > [ 26.502655] systemd[1]: Condition check resulted in First Boot Complete
> > > being skipped.
> > > [ 26.506712] systemd[1]: Finished Set the console keyboard layout.
> > > [ 26.508747] systemd[1]: Finished Create System Users.
> > > [ 26.510321] systemd[1]: Starting Create Static Device Nodes in /dev...
> > > [ 26.511046] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots
> > > etc. using dmeventd or progress polling.
> > > [ 26.528026] systemd[1]: Finished Load Kernel Modules.
> > > [ 26.529531] systemd[1]: Starting Apply Kernel Variables...
> > > [ 26.530139] systemd[1]: Finished Create Static Device Nodes in /dev.
> > > [ 26.530349] systemd[1]: Reached target Preparation for Local File
> > > Systems.
> > > [ 26.532348] systemd[1]: Starting Rule-based Manager for Device Events and
> > > Files...
> > > [ 26.553864] systemd[1]: Started Journal Service.
> > > [ 26.562848] systemd-journald[406]: Received client request to flush
> > > runtime journal.
> > > [ 26.919447] i5500_temp 0000:00:14.3: Sensor seems to be disabled
> > > [ 26.941867] EDAC MC0: Giving out device to module i7core_edac.c
> > > controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
> > > [ 26.941914] EDAC PCI0: Giving out device to module i7core_edac controller
> > > EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
> > > [ 26.941936] EDAC i7core: Driver loaded, 1 memory controller(s) found.
> > > [ 27.501967] mc: Linux media interface: v0.10
> > > [ 27.821741] videodev: Linux video capture interface: v2.00
> > > [ 27.829839] kvm_intel: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work
> > > properly. Using workaround
> > > [ 27.910536] snd_hda_intel 0000:04:00.1: Force to non-snoop mode
> > > [ 27.927314] EXT4-fs (sdd1): mounted filesystem
> > > 269c3cb0-82a8-484f-9f96-2569d52ced08 r/w with ordered data mode. Quota mode:
> > > none.
> > > [ 27.967879] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card1/input9
> > > [ 27.967995] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card1/input10
> > > [ 28.099282] EXT4-fs (sdb3): mounted filesystem
> > > 965f3d65-ec1b-49a8-a27a-a6989cecf661 r/w with ordered data mode. Quota mode:
> > > none.
> > > [ 28.119031] EXT4-fs (sdc): mounted filesystem
> > > 7f49ad40-e533-42c4-9977-7c4809d47b3d r/w with ordered data mode. Quota mode:
> > > none.
> > > [ 28.120177] EXT4-fs (sda1): mounted filesystem
> > > a7d8e4b2-e2df-4976-b661-37e48f7411cf r/w with ordered data mode. Quota mode:
> > > none.
> > > [ 28.148845] Registered IR keymap rc-rc6-mce
> > > [ 28.152056] Adding 15625212k swap on /dev/sdb2. Priority:-2 extents:1
> > > across:15625212k SS
> > > [ 28.169493] usb 2-5.2: Found UVC 1.00 device Razer Kiyo Pro (1532:0e05)
> > > [ 28.174756] usbcore: registered new interface driver uvcvideo
> > > [ 28.238001] IR RC6 protocol handler initialized
> > > [ 28.301533] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 48000
> > > [ 28.313037] rc rc0: Media Center Ed. eHome Infrared Remote Transceiver as
> > > /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/rc/rc0
> > > [ 28.313134] rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw
> > > IR receiver, raw IR transmitter
> > > [ 28.313280] input: Media Center Ed. eHome Infrared Remote Transceiver as
> > > /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/rc/rc0/input11
> > > [ 28.405085] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1989B:
> > > line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
> > > [ 28.405093] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0
> > > (0x0/0x0/0x0/0x0/0x0)
> > > [ 28.405095] snd_hda_codec_analog hdaudioC0D0: hp_outs=1
> > > (0x11/0x0/0x0/0x0/0x0)
> > > [ 28.405098] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
> > > [ 28.405099] snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x1d
> > > [ 28.405101] snd_hda_codec_analog hdaudioC0D0: inputs:
> > > [ 28.405103] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x17
> > > [ 28.405105] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x14
> > > [ 28.405106] snd_hda_codec_analog hdaudioC0D0: Line=0x15
> > > [ 28.405108] snd_hda_codec_analog hdaudioC0D0: CD=0x18
> > > [ 28.420231] input: HDA Intel Rear Mic as
> > > /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> > > [ 28.420363] input: HDA Intel Front Mic as
> > > /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> > > [ 28.420495] input: HDA Intel Line as
> > > /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> > > [ 28.420592] input: HDA Intel Line Out Front as
> > > /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
> > > [ 28.420710] input: HDA Intel Line Out Surround as
> > > /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
> > > [ 28.420798] input: HDA Intel Line Out CLFE as
> > > /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
> > > [ 28.420905] input: HDA Intel Line Out Side as
> > > /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
> > > [ 28.421001] input: HDA Intel Front Headphone as
> > > /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
> > > [ 28.540353] cfg80211: Loading compiled-in X.509 certificates for
> > > regulatory database
> > > [ 28.540722] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> > > [ 28.541013] Loaded X.509 cert 'wens:
> > > 61c038651aabdcf94bd0ac7ff06c7248db18c600'
> > > [ 28.541974] mceusb 6-1:1.0: long-range (0x1) receiver active
> > > [ 28.571526] cx23885: cx23885 driver version 0.0.4 loaded
> > > [ 28.571754] cx23885: CORE cx23885[0]: subsystem: 0070:7801, board:
> > > Hauppauge WinTV-HVR1800 [card=2,autodetected]
> > > [ 28.605043] mceusb 6-1:1.0: Registered Topseed eHome Infrared Transceiver
> > > with mce emulator interface version 1
> > > [ 28.605052] mceusb 6-1:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1
> > > active)
> > > [ 28.605120] usbcore: registered new interface driver mceusb
> > > [ 28.607375] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 24000
> > > [ 28.613794] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 32000
> > > [ 28.718690] usbcore: registered new interface driver snd-usb-audio
> > > [ 29.013320] tveeprom: Hauppauge model 78521, rev C1E9, serial# 4029759297
> > > [ 29.013327] tveeprom: MAC address is 00:0d:fe:31:3f:41
> > > [ 29.013329] tveeprom: tuner model is Philips 18271_8295 (idx 149, type
> > > 54)
> > > [ 29.013331] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
> > > [ 29.013333] tveeprom: audio processor is CX23887 (idx 42)
> > > [ 29.013334] tveeprom: decoder processor is CX23887 (idx 37)
> > > [ 29.013335] tveeprom: has radio
> > > [ 29.013336] cx23885: cx23885[0]: hauppauge eeprom: model=78521
> > > [ 29.101189] cx25840 2-0044: cx23887 A/V decoder found @ 0x88 (cx23885[0])
> > > [ 29.560967] usb 3-4: reset high-speed USB device number 4 using ehci-pci
> > > [ 29.731550] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev
> > > 021c detected
> > > [ 29.760952] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008
> > > detected
> > > [ 29.761293] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> > > [ 29.761939] usbcore: registered new interface driver rt2800usb
> > > [ 29.792083] rt2800usb 3-4:1.0 wlx20cf30a24130: renamed from wlan0
> > > [ 29.793914] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware
> > > (16382 bytes)
> > > [ 29.931887] tuner: 1-0042: Tuner -1 found with type(s) Radio TV.
> > > [ 29.977929] tda829x 1-0042: could not clearly identify tuner address,
> > > defaulting to 60
> > > [ 30.005283] tda18271 1-0060: creating new instance
> > > [ 30.049326] tda18271: TDA18271HD/C1 detected @ 1-0060
> > > [ 30.873273] tda829x 1-0042: type set to tda8295+18271
> > > [ 32.228176] cx23885: cx23885[0]: registered device video2 [v4l2]
> > > [ 32.228328] cx23885: cx23885[0]: registered device vbi0
> > > [ 32.228612] cx23885: cx23885[0]: alsa: registered ALSA audio device
> > > [ 32.228777] cx23885: cx23885[0]: registered device video3 [mpeg]
> > > [ 32.228793] cx23885: Firmware and/or mailbox pointer not initialized or
> > > corrupted, signature = 0xffffbfff, cmd = PING_FW
> > > [ 32.228801] fbcon: Taking over console
> > > [ 32.229089] Console: switching to colour frame buffer device 240x67
> > > [ 32.230049] cx23885 0000:09:00.0: Direct firmware load for
> > > v4l-cx23885-enc.fw failed with error -2
> > > [ 32.230055] cx23885: ERROR: Hotplug firmware request failed
> > > (v4l-cx23885-enc.fw).
> > > [ 32.230056] cx23885: Please fix your hotplug setup, the board will not
> > > work without firmware loaded!
> > > [ 32.230057] cx23885: cx23885_initialize_codec() f/w load failed
> > > [ 32.230059] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
> > > [ 32.230061] cx23885: cx23885[0]: cx23885 based dvb card
> > > [ 32.398080] MT2131: successfully identified at address 0x61
> > > [ 32.399714] dvbdev: DVB: registering new adapter (cx23885[0])
> > > [ 32.399718] cx23885 0000:09:00.0: DVB: registering adapter 0 frontend 0
> > > (Samsung S5H1409 QAM/8VSB Frontend)...
> > > [ 32.400463] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb1
> > > [ 32.400467] cx23885: cx23885[0]/0: found at 0000:09:00.0, rev: 15, irq:
> > > 17, latency: 0, mmio: 0xfbc00000
> > > [ 43.045128] audit: type=1400 audit(1726517963.933:2): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start"
> > > pid=1473 comm="apparmor_parser"
> > > [ 43.047845] audit: type=1400 audit(1726517963.933:3): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="nvidia_modprobe"
> > > pid=1470 comm="apparmor_parser"
> > > [ 43.047854] audit: type=1400 audit(1726517963.933:4): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
> > > pid=1470 comm="apparmor_parser"
> > > [ 43.047859] audit: type=1400 audit(1726517963.933:5): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="lsb_release" pid=1468
> > > comm="apparmor_parser"
> > > [ 43.048576] audit: type=1400 audit(1726517963.933:6): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1474
> > > comm="apparmor_parser"
> > > [ 43.048583] audit: type=1400 audit(1726517963.933:7): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="man_filter" pid=1474
> > > comm="apparmor_parser"
> > > [ 43.048587] audit: type=1400 audit(1726517963.933:8): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="man_groff" pid=1474
> > > comm="apparmor_parser"
> > > [ 43.053897] audit: type=1400 audit(1726517963.941:9): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="/usr/bin/redshift"
> > > pid=1476 comm="apparmor_parser"
> > > [ 43.054106] audit: type=1400 audit(1726517963.941:10): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="libreoffice-oosplash"
> > > pid=1478 comm="apparmor_parser"
> > > [ 43.054837] audit: type=1400 audit(1726517963.941:11): apparmor="STATUS"
> > > operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
> > > pid=1479 comm="apparmor_parser"
> > > [ 43.276873] RPC: Registered named UNIX socket transport module.
> > > [ 43.276877] RPC: Registered udp transport module.
> > > [ 43.276879] RPC: Registered tcp transport module.
> > > [ 43.276879] RPC: Registered tcp-with-tls transport module.
> > > [ 43.276880] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > > [ 43.770189] sky2 0000:06:00.0 enp6s0: enabling interface
> > > [ 43.781961] sky2 0000:08:00.0 enp8s0: enabling interface
> > > [ 43.787810] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading
> > > firmware file 'rt2870.bin'
> > > [ 43.793640] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware
> > > detected - version: 0.36
> > > [ 45.854962] wlx20cf30a24130: authenticate with fc:2b:b2:a7:af:02 (local
> > > address=20:cf:30:a2:41:30)
> > > [ 45.854969] wlx20cf30a24130: send auth to fc:2b:b2:a7:af:02 (try 1/3)
> > > [ 45.867365] wlx20cf30a24130: authenticated
> > > [ 45.868985] wlx20cf30a24130: associate with fc:2b:b2:a7:af:02 (try 1/3)
> > > [ 45.877038] wlx20cf30a24130: RX AssocResp from fc:2b:b2:a7:af:02
> > > (capab=0x1411 status=0 aid=3)
> > > [ 45.887555] wlx20cf30a24130: associated
> > > [ 46.441910] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 48000
> > > [ 46.558022] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 48000
> > > [ 46.677063] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 48000
> > > [ 46.695942] sky2 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full
> > > duplex, flow control both
> > > [ 47.319604] wlx20cf30a24130: Limiting TX power to 30 (30 - 0) dBm as
> > > advertised by fc:2b:b2:a7:af:02
> > > [ 59.697229] kauditd_printk_skb: 25 callbacks suppressed
> > > [ 59.697233] audit: type=1400 audit(1726517980.585:37): apparmor="DENIED"
> > > operation="open" class="file" profile="/usr/sbin/cups-browsed"
> > > name="/usr/local/lib/libz.so.1.3" pid=2031 comm="cups-browsed"
> > > requested_mask="r" denied_mask="r" fsuid=0 ouid=0
> > > [ 59.699869] audit: type=1400 audit(1726517980.585:38): apparmor="DENIED"
> > > operation="open" class="file" profile="/usr/sbin/cups-browsed"
> > > name="/usr/local/lib/libpng16.so.16.44.0" pid=2031 comm="cups-browsed"
> > > requested_mask="r" denied_mask="r" fsuid=0 ouid=0
> > > [ 59.810741] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 48000
> > > [ 59.921457] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 48000
> > > [ 60.036414] usb 2-5.2: current rate 16000 is different from the runtime
> > > rate 48000
> > > [ 63.727107] warning: `kdeconnectd' uses wireless extensions which will
> > > stop working for Wi-Fi 7 hardware; use nl80211
> > >
> > > On 2024-09-16 11:20, Dr. David Alan Gilbert wrote:
> > > > * Bob Gill (gillb5@...us.net) wrote:
> > > > > OK.
> > > > Thanks! I'm not seeing anything too obvious, however...
> > > >
> > > > > 6.10.0.dmesg.txt:
> > > > >
> > > > > [ 0.000000] Linux version 6.10.0 (root@...edom) (gcc (Ubuntu
> > > > > 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP
> > > > > PREEMPT_DYNAMIC Sun Jul 14 18:50:17 MDT 2024
> > > > > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.10.0
> > > > > root=UUID=94072726-5fed-439f-a496-8e6aaa88617e ro quiet splash
> > > > .....
> > > >
> > > >
> > > > > 6.11.0.dmesg.txt
> > > > >
> > > > > [ 0.000000] Linux version 6.11.0 (root@...edom) (gcc (Ubuntu
> > > > > 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP
> > > > > PREEMPT_DYNAMIC Sun Sep 15 13:10:55 MDT 2024
> > > > > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.11.0
> > > > > root=UUID=94072726-5fed-439f-a496-8e6aaa88617e ro recovery nomodeset
> > > > > dis_ucode_ldr
> > > > > [ 0.000000] KERNEL supported cpus:
> > > > Would it be possible to get a 6.11.0 dmesg without the 'nomodeset' ?
> > > > I realise that's trickier, but it's really where things start to get interesting.
> > > >
> > > > On the 6.10 dmesg we have the normal fun:
> > > >
> > > > > [ 15.759932] [drm] amdgpu kernel modesetting enabled.
> > > > > [ 15.760169] amdgpu: Virtual CRAT table created for CPU
> > > > > [ 15.760203] amdgpu: Topology: Add CPU node
> > > > > [ 15.760502] [drm] initializing kernel modesetting (BEIGE_GOBY
> > > > > 0x1002:0x743F 0x148C:0x2415 0xC1).
> > > > > [ 15.760519] [drm] register mmio base: 0xFB700000
> > > > > [ 15.760520] [drm] register mmio size: 1048576
> > > > > [ 15.764353] [drm] add ip block number 0 <nv_common>
> > > > > [ 15.764355] [drm] add ip block number 1 <gmc_v10_0>
> > > > > [ 15.764357] [drm] add ip block number 2 <navi10_ih>
> > > > > [ 15.764359] [drm] add ip block number 3 <psp>
> > > > > [ 15.764360] [drm] add ip block number 4 <smu>
> > > > > [ 15.764361] [drm] add ip block number 5 <dm>
> > > > > [ 15.764363] [drm] add ip block number 6 <gfx_v10_0>
> > > > > [ 15.764364] [drm] add ip block number 7 <sdma_v5_2>
> > > > > [ 15.764366] [drm] add ip block number 8 <vcn_v3_0>
> > > > > [ 15.764379] resource: resource sanity check: requesting [mem
> > > > > 0x00000000000c0000-0x00000000000dffff], which spans more than PCI Bus
> > > > > 0000:00 [mem 0x000d0000-0x000dffff window]
> > > > > [ 15.764383] caller pci_map_rom+0x83/0x220 mapping multiple BARs
> > > > > [ 15.764391] amdgpu 0000:04:00.0: No more image in the PCI ROM
> > > > > [ 15.764412] amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from ROM BAR
> > > > > [ 15.764414] amdgpu: ATOM BIOS: 113-001-XT7
> > > > > [ 15.777550] [drm] VCN(0) decode is enabled in VM mode
> > > > > [ 15.781178] amdgpu 0000:04:00.0: vgaarb: deactivate vga console
> > > > > [ 15.781185] amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ)
> > > > > feature disabled as experimental (default)
> > > > > [ 15.781194] amdgpu 0000:04:00.0: amdgpu: PCIE atomic ops is not supported
> > > > > [ 15.781245] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit,
> > > > > fragment size is 9-bit
> > > > > [ 15.781261] amdgpu 0000:04:00.0: amdgpu: VRAM: 4080M 0x0000008000000000 -
> > > > > 0x00000080FEFFFFFF (4080M used)
> > > > > [ 15.781264] amdgpu 0000:04:00.0: amdgpu: GART: 512M 0x0000000000000000 -
> > > > > 0x000000001FFFFFFF
> > > > > [ 15.781277] [drm] Detected VRAM RAM=4080M, BAR=256M
> > > > > [ 15.781279] [drm] RAM width 64bits GDDR6
> > > > > [ 15.783108] [drm] amdgpu: 4080M of VRAM memory ready
> > > > > [ 15.783112] [drm] amdgpu: 5979M of GTT memory ready.
> > > > > [ 15.783133] [drm] GART: num cpu pages 131072, num gpu pages 131072
> > > > > [ 15.783255] [drm] PCIE GART of 512M enabled (table at
> > > > > 0x0000008000800000).
> > > > > [ 18.564918] random: crng init done
> > > > > [ 19.594908] amdgpu 0000:04:00.0: amdgpu: STB initialized to 2048 entries
> > > > > [ 19.595220] [drm] Loading DMUB firmware via PSP: version=0x02020020
> > > > > [ 19.595937] [drm] use_doorbell being set to: [true]
> > > > > [ 19.595955] [drm] Found VCN firmware Version ENC: 1.31 DEC: 3 VEP: 0
> > > > > Revision: 2
> > > > > [ 19.595965] amdgpu 0000:04:00.0: amdgpu: Will use PSP to load VCN
> > > > > firmware
> > > > > [ 19.663643] amdgpu 0000:04:00.0: amdgpu: reserve 0xa00000 from
> > > > > 0x80fd000000 for PSP TMR
> > > > > [ 19.765435] amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is
> > > > > not available
> > > > > [ 19.781512] amdgpu 0000:04:00.0: amdgpu: SECUREDISPLAY: securedisplay ta
> > > > > ucode is not available
> > > > > [ 19.781538] amdgpu 0000:04:00.0: amdgpu: smu driver if version =
> > > > > 0x0000000d, smu fw if version = 0x00000010, smu fw program = 0, version =
> > > > > 0x00492400 (73.36.0)
> > > > > [ 19.781544] amdgpu 0000:04:00.0: amdgpu: SMU driver if version not
> > > > > matched
> > > > > [ 19.781581] amdgpu 0000:04:00.0: amdgpu: use vbios provided pptable
> > > > > [ 19.828182] amdgpu 0000:04:00.0: amdgpu: SMU is initialized successfully!
> > > > > [ 19.828795] [drm] Display Core v3.2.281 initialized on DCN 3.0.3
> > > > > [ 19.828798] [drm] DP-HDMI FRL PCON supported
> > > > > [ 19.829988] [drm] DMUB hardware initialized: version=0x02020020
> > > > > [ 19.914675] [drm] kiq ring mec 2 pipe 1 q 0
> > > > > [ 19.956011] amdgpu: HMM registered 4080MB device memory
> > > > > [ 19.963868] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
> > > > > [ 19.963883] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
> > > > > [ 19.964255] amdgpu: Virtual CRAT table created for GPU
> > > > > [ 19.964896] amdgpu: Topology: Add dGPU node [0x743f:0x1002]
> > > > > [ 19.964900] kfd kfd: amdgpu: added device 1002:743f
> > > > > [ 19.964919] amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 8,
> > > > > active_cu_number 16
> > > > > [ 19.964924] amdgpu 0000:04:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0
> > > > > on hub 0
> > > > > [ 19.964926] amdgpu 0000:04:00.0: amdgpu: ring gfx_0.1.0 uses VM inv eng 1
> > > > > on hub 0
> > > > > [ 19.964927] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng
> > > > > 4 on hub 0
> > > > > [ 19.964929] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng
> > > > > 5 on hub 0
> > > > > [ 19.964931] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng
> > > > > 6 on hub 0
> > > > > [ 19.964933] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng
> > > > > 7 on hub 0
> > > > > [ 19.964935] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng
> > > > > 8 on hub 0
> > > > > [ 19.964936] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng
> > > > > 9 on hub 0
> > > > > [ 19.964938] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng
> > > > > 10 on hub 0
> > > > > [ 19.964940] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng
> > > > > 11 on hub 0
> > > > > [ 19.964941] amdgpu 0000:04:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng
> > > > > 12 on hub 0
> > > > > [ 19.964943] amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 13 on
> > > > > hub 0
> > > > > [ 19.964945] amdgpu 0000:04:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0
> > > > > on hub 8
> > > > > [ 19.966250] amdgpu 0000:04:00.0: amdgpu: Using BACO for runtime pm
> > > > > [ 19.966781] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:04:00.0 on
> > > > > minor 0
> > > > > [ 19.975362] fbcon: amdgpudrmfb (fb0) is primary device
> > > > > [ 19.975369] fbcon: Deferring console take-over
> > > > > [ 19.975373] amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer
> > > > > device
> > > > So lets see what that looks like on a 6.11.0 without the nomodeset.
> > > >
> > > > Dave
--
-----Open up your eyes, open up your mind, open up your code -------
/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \
\ dave @ treblig.org | | In Hex /
\ _________________________|_____ http://www.treblig.org |_______/
Powered by blists - more mailing lists