| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <46236bfa-decc-4515-8909-e9e1008594d2@telus.net>
Date: Mon, 16 Sep 2024 20:01:33 -0600
From: Bob Gill <gillb5@...us.net>
To: "Dr. David Alan Gilbert" <linux@...blig.org>
Cc: linux-kernel@...r.kernel.org
Subject: Re: 6.11.0 crash on X startup
Hi. Sorry for the delayed reply.
When it crashes, the caps lock key stops responding. Unplug/replug the
keyboard usb connection also does
nothing. After the crash, the caps lock key does not light up. Likewise the
power and reset buttons on the front of the case stop responding, I have
to shut
off/reset the computer with the power bar. However, in answering your
questions, I have
done a bit more testing. If I start using 6.11.0 in recovery mode,
enable networking,
drop to the terminal, then run "service lightdm start", it crashes, but
if run
startx, x starts (but I have two monitors and it only starts on one),
but inxi -G shows that the amdgpu loadable kernel module is not in use.
Also the x server is really slow.
On 6.10.0:
inxi -G gives:
Graphics:
Device-1: AMD driver: amdgpu v: kernel
Device-2: Conexant Systems CX23887/8 PCIe Broadcast Audio and Video
Decoder with 3D Comb
driver: cx23885 v: 0.0.4
Device-3: Razer USA Kiyo Pro type: USB driver: snd-usb-audio,uvcvideo
Device-4: Realtek RTL2838 DVB-T type: USB driver: N/A
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati
unloaded: fbdev,modesetting,radeon,vesa gpu: amdgpu resolution:
1: 1920x1080~60Hz 2: 1920x1080~60Hz
OpenGL:
renderer: AMD Radeon RX 6500 XT (navi24 LLVM 15.0.7 DRM 3.57 6.10.0)
v: 4.6 Mesa 23.2.1-1ubuntu3.1~22.04.2
On 6.11.0: inxi -G gives:
Graphics:
Device-1: AMD driver: N/A
Device-2: Conexant Systems CX23887/8 PCIe Broadcast Audio and Video
Decoder with 3D Comb
driver: cx23885 v: 0.0.4
Device-3: Razer USA Kiyo Pro type: USB driver: snd-usb-audio,uvcvideo
Device-4: Realtek RTL2838 DVB-T type: USB driver: N/A
Display: server: X.Org v: 1.21.1.4 driver: X: loaded: ati,vesa
unloaded: fbdev,modesetting,radeon gpu: cx23885 resolution: 1920x1080
OpenGL: renderer: llvmpipe (LLVM 15.0.7 128 bits)
v: 4.5 Mesa 23.2.1-1ubuntu3.1~22.04.2
I know a lot of changes happened to /lib/modules/<kernel
version>/kernel/drivers/gpu/amd/amdgpu/amdgpu.ko
The 6.10.0 version is 523 megabytes and the 6.11.0 version is 580
megabytes. I don't want to point my finger and say "that", but for some
reason my 6.11.0 kernel doesn't seem to like the amdgpu kernel object.
Most of my hardware (tylersberg/nehalem, motherboard) is fairly old, but
the graphics card is less than 2 years old. Maybe that's why
I hit a corner case.
Thanks for your reply.
On 2024-09-16 17:03, Dr. David Alan Gilbert wrote:
> * Bob Gill (gillb5@...us.net) wrote:
>> So I think I know what you are look for. My grub line is
>>
>> "quiet splash" without modeset.
>>
>> I don't know how to log dmesg automatically from boot. If I
>>
>> start from a recovery kernel in the bootloader, I can give you dmesg,
>>
>> but if I start from a regular kernel (6.11.0 for example), as soon as it
>>
>> gets to the X server, it crashes the system. I can't type ctrl-alt-1
>> moments after the bootloader screen disappears
> Oh, I didn't understand that from your initial report - I thought it was
> only X not starting.
>
>> (while its still reading the kernel source from disk and loading it into
>> memory) to get to a
>>
>> terminal and avoid the X server (I do attempt it, but have never been
>> successful). As soon as it tries to start the X server, the system
>> crashes. As I understand it, dmesg is stored in a ring buffer (and does not
>> survive reboot).
>>
>> Did you want the output of /var/log/kern.log (or /var/log/kern.log.1)?
> OK, so if you do have a boot message from the failed kernel without the nomodeset
> then yes that would be great. It depends on your distro where it would put that,
> and a lot of luck whether it manages to get to disk before the crash.
>
> Some thoughts:
> a) When it crashes, you say ctrl-alt-1 doesn't work - does alt-sysrq-h do anything?
> b) How about caps-lock when it crashes - does the light change?
> c) Can you boot into non-graphics, - e.g. something like adding
> systemd.unit=multi-user.target
>
> I think should get you a text login? (Depending on distro etc)
> If that fails, try just adding the word single
>
> Dave
>
>
>> On 2024-09-16 14:36, Dr. David Alan Gilbert wrote:
>>> * Bob Gill (gillb5@...us.net) wrote:
>>>> OK, so my grub line looks like "quiet splash nomodeset"
>>> Sorry, no; I was asking for a 6.11.0 boot *without* the nomodeset - in the same
>>> way that the 6.10.0 dmesg boots so we can compare them.
>>>
>>>> I have two monitors, of which only the main monitor starts with an X server
>>>> (and the response is slow).
>>>>
>>>> Here is the result of dmesg. The parts that look interesting are around the
>>>> 7.3 second mark that say
>>>>
>>>> "ACPI: OSL: Resource conflict; ACPI support missing from driver?"
>>> It's not necessarily relevant.
>>>
>>> Dave
>>>
>>>> Oh, and thanks for replying.
>>>>
>>>> [ 0.000000] Linux version 6.11.0 (root@...edom) (gcc (Ubuntu
>>>> 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP
>>>> PREEMPT_DYNAMIC Sun Sep 15 13:10:55 MDT 2024
>>>> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.11.0
>>>> root=UUID=94072726-5fed-439f-a496-8e6aaa88617e ro quiet splash nomodeset
>>>> [ 0.000000] KERNEL supported cpus:
>>>> [ 0.000000] Intel GenuineIntel
>>>> [ 0.000000] AMD AuthenticAMD
>>>> [ 0.000000] Hygon HygonGenuine
>>>> [ 0.000000] Centaur CentaurHauls
>>>> [ 0.000000] zhaoxin Shanghai
>>>> [ 0.000000] BIOS-provided physical RAM map:
>>>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
>>>> [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff]
>>>> reserved
>>>> [ 0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff]
>>>> reserved
>>>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
>>>> [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI
>>>> data
>>>> [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI
>>>> NVS
>>>> [ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff]
>>>> reserved
>>>> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
>>>> reserved
>>>> [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff]
>>>> reserved
>>>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
>>>> [ 0.000000] NX (Execute Disable) protection: active
>>>> [ 0.000000] APIC: Static calls initialized
>>>> [ 0.000000] SMBIOS 2.5 present.
>>>> [ 0.000000] DMI: System manufacturer System Product Name/P6T DELUXE, BIOS
>>>> 2209 09/21/2010
>>>> [ 0.000000] DMI: Memory slots populated: 6/6
>>>> [ 0.000000] tsc: Fast TSC calibration using PIT
>>>> [ 0.000000] tsc: Detected 2672.776 MHz processor
>>>> [ 0.001528] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>>>> [ 0.001534] e820: remove [mem 0x000a0000-0x000fffff] usable
>>>> [ 0.001544] last_pfn = 0x340000 max_arch_pfn = 0x400000000
>>>> [ 0.001553] total RAM covered: 12280M
>>>> [ 0.001829] Found optimal setting for mtrr clean up
>>>> [ 0.001830] gran_size: 64K chunk_size: 16M num_reg: 6 lose
>>>> cover RAM: 0G
>>>> [ 0.001837] MTRR map: 8 entries (5 fixed + 3 variable; max 21), built
>>>> from 8 variable MTRRs
>>>> [ 0.001841] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
>>>> [ 0.002807] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
>>>> [ 0.002820] last_pfn = 0xbf798 max_arch_pfn = 0x400000000
>>>> [ 0.014822] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
>>>> [ 0.015378] RAMDISK: [mem 0x0b466000-0x37feefff]
>>>> [ 0.015390] ACPI: Early table checksum verification disabled
>>>> [ 0.015394] ACPI: RSDP 0x00000000000FB150 000024 (v02 ACPIAM)
>>>> [ 0.015401] ACPI: XSDT 0x00000000BF780100 000064 (v01 092110 XSDT0924
>>>> 20100921 MSFT 00000097)
>>>> [ 0.015410] ACPI: FACP 0x00000000BF780290 0000F4 (v03 092110 FACP0924
>>>> 20100921 MSFT 00000097)
>>>> [ 0.015420] ACPI: DSDT 0x00000000BF7804B0 00B69B (v01 A1087 A1087001
>>>> 00000001 INTL 20060113)
>>>> [ 0.015426] ACPI: FACS 0x00000000BF798000 000040
>>>> [ 0.015432] ACPI: FACS 0x00000000BF798000 000040
>>>> [ 0.015437] ACPI: APIC 0x00000000BF780390 0000D8 (v01 092110 APIC0924
>>>> 20100921 MSFT 00000097)
>>>> [ 0.015443] ACPI: MCFG 0x00000000BF780470 00003C (v01 092110 OEMMCFG
>>>> 20100921 MSFT 00000097)
>>>> [ 0.015449] ACPI: OEMB 0x00000000BF798040 000072 (v01 092110 OEMB0924
>>>> 20100921 MSFT 00000097)
>>>> [ 0.015456] ACPI: HPET 0x00000000BF78F4B0 000038 (v01 092110 OEMHPET
>>>> 20100921 MSFT 00000097)
>>>> [ 0.015462] ACPI: DMAR 0x00000000BF7980C0 000138 (v01 AMI OEMDMAR
>>>> 00000001 MSFT 00000097)
>>>> [ 0.015468] ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 092110 OEMOSFR
>>>> 20100921 MSFT 00000097)
>>>> [ 0.015474] ACPI: SSDT 0x00000000BF799E10 000363 (v01 DpgPmm CpuPm
>>>> 00000012 INTL 20060113)
>>>> [ 0.015480] ACPI: Reserving FACP table memory at [mem
>>>> 0xbf780290-0xbf780383]
>>>> [ 0.015482] ACPI: Reserving DSDT table memory at [mem
>>>> 0xbf7804b0-0xbf78bb4a]
>>>> [ 0.015484] ACPI: Reserving FACS table memory at [mem
>>>> 0xbf798000-0xbf79803f]
>>>> [ 0.015485] ACPI: Reserving FACS table memory at [mem
>>>> 0xbf798000-0xbf79803f]
>>>> [ 0.015487] ACPI: Reserving APIC table memory at [mem
>>>> 0xbf780390-0xbf780467]
>>>> [ 0.015489] ACPI: Reserving MCFG table memory at [mem
>>>> 0xbf780470-0xbf7804ab]
>>>> [ 0.015491] ACPI: Reserving OEMB table memory at [mem
>>>> 0xbf798040-0xbf7980b1]
>>>> [ 0.015492] ACPI: Reserving HPET table memory at [mem
>>>> 0xbf78f4b0-0xbf78f4e7]
>>>> [ 0.015494] ACPI: Reserving DMAR table memory at [mem
>>>> 0xbf7980c0-0xbf7981f7]
>>>> [ 0.015496] ACPI: Reserving OSFR table memory at [mem
>>>> 0xbf78f4f0-0xbf78f59f]
>>>> [ 0.015498] ACPI: Reserving SSDT table memory at [mem
>>>> 0xbf799e10-0xbf79a172]
>>>> [ 0.015676] No NUMA configuration found
>>>> [ 0.015678] Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
>>>> [ 0.015692] NODE_DATA(0) allocated [mem 0x33ffcd000-0x33fff7fff]
>>>> [ 0.016090] Zone ranges:
>>>> [ 0.016092] DMA [mem 0x0000000000001000-0x0000000000ffffff]
>>>> [ 0.016095] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
>>>> [ 0.016098] Normal [mem 0x0000000100000000-0x000000033fffffff]
>>>> [ 0.016100] Device empty
>>>> [ 0.016102] Movable zone start for each node
>>>> [ 0.016106] Early memory node ranges
>>>> [ 0.016106] node 0: [mem 0x0000000000001000-0x000000000009dfff]
>>>> [ 0.016109] node 0: [mem 0x0000000000100000-0x00000000bf77ffff]
>>>> [ 0.016112] node 0: [mem 0x0000000100000000-0x000000033fffffff]
>>>> [ 0.016116] Initmem setup node 0 [mem
>>>> 0x0000000000001000-0x000000033fffffff]
>>>> [ 0.016124] On node 0, zone DMA: 1 pages in unavailable ranges
>>>> [ 0.016158] On node 0, zone DMA: 98 pages in unavailable ranges
>>>> [ 0.043074] On node 0, zone Normal: 2176 pages in unavailable ranges
>>>> [ 0.043371] ACPI: PM-Timer IO Port: 0x808
>>>> [ 0.043400] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
>>>> 0-23
>>>> [ 0.043408] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI
>>>> 24-47
>>>> [ 0.043412] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>>> [ 0.043415] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>>> [ 0.043423] ACPI: Using ACPI (MADT) for SMP configuration information
>>>> [ 0.043426] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>>> [ 0.043442] CPU topo: Max. logical packages: 2
>>>> [ 0.043444] CPU topo: Max. logical dies: 2
>>>> [ 0.043445] CPU topo: Max. dies per package: 1
>>>> [ 0.043456] CPU topo: Max. threads per core: 2
>>>> [ 0.043458] CPU topo: Num. cores per package: 4
>>>> [ 0.043459] CPU topo: Num. threads per package: 8
>>>> [ 0.043460] CPU topo: Allowing 8 present CPUs plus 8 hotplug CPUs
>>>> [ 0.043478] PM: hibernation: Registered nosave memory: [mem
>>>> 0x00000000-0x00000fff]
>>>> [ 0.043482] PM: hibernation: Registered nosave memory: [mem
>>>> 0x0009e000-0x0009efff]
>>>> [ 0.043483] PM: hibernation: Registered nosave memory: [mem
>>>> 0x0009f000-0x0009ffff]
>>>> [ 0.043485] PM: hibernation: Registered nosave memory: [mem
>>>> 0x000a0000-0x000e4fff]
>>>> [ 0.043487] PM: hibernation: Registered nosave memory: [mem
>>>> 0x000e5000-0x000fffff]
>>>> [ 0.043489] PM: hibernation: Registered nosave memory: [mem
>>>> 0xbf780000-0xbf797fff]
>>>> [ 0.043491] PM: hibernation: Registered nosave memory: [mem
>>>> 0xbf798000-0xbf7dbfff]
>>>> [ 0.043493] PM: hibernation: Registered nosave memory: [mem
>>>> 0xbf7dc000-0xbfffffff]
>>>> [ 0.043494] PM: hibernation: Registered nosave memory: [mem
>>>> 0xc0000000-0xfedfffff]
>>>> [ 0.043496] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfee00000-0xfee00fff]
>>>> [ 0.043497] PM: hibernation: Registered nosave memory: [mem
>>>> 0xfee01000-0xffdfffff]
>>>> [ 0.043499] PM: hibernation: Registered nosave memory: [mem
>>>> 0xffe00000-0xffffffff]
>>>> [ 0.043501] [mem 0xc0000000-0xfedfffff] available for PCI devices
>>>> [ 0.043503] Booting paravirtualized kernel on bare hardware
>>>> [ 0.043507] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
>>>> 0xffffffff, max_idle_ns: 7645519600211568 ns
>>>> [ 0.043517] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16
>>>> nr_node_ids:1
>>>> [ 0.045202] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
>>>> [ 0.045216] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
>>>> [ 0.045221] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
>>>> [ 0.045232] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
>>>> [ 0.045264] Kernel command line: BOOT_IMAGE=/vmlinuz-6.11.0
>>>> root=UUID=94072726-5fed-439f-a496-8e6aaa88617e ro quiet splash nomodeset
>>>> [ 0.045420] Booted with the nomodeset parameter. Only the system
>>>> framebuffer will be available
>>>> [ 0.045424] Unknown kernel command line parameters "splash
>>>> BOOT_IMAGE=/vmlinuz-6.11.0", will be passed to user space.
>>>> [ 0.047571] Dentry cache hash table entries: 2097152 (order: 12, 16777216
>>>> bytes, linear)
>>>> [ 0.048684] Inode-cache hash table entries: 1048576 (order: 11, 8388608
>>>> bytes, linear)
>>>> [ 0.049079] Fallback order for Node 0: 0
>>>> [ 0.049086] Built 1 zonelists, mobility grouping on. Total pages:
>>>> 3143453
>>>> [ 0.049088] Policy zone: Normal
>>>> [ 0.049100] mem auto-init: stack:off, heap alloc:on, heap free:off
>>>> [ 0.049115] software IO TLB: area num 16.
>>>> [ 0.128195] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
>>>> [ 0.128395] Kernel/User page tables isolation: enabled
>>>> [ 0.128531] ftrace: allocating 53163 entries in 208 pages
>>>> [ 0.139782] ftrace: allocated 208 pages with 3 groups
>>>> [ 0.140826] Dynamic Preempt: voluntary
>>>> [ 0.141193] rcu: Preemptible hierarchical RCU implementation.
>>>> [ 0.141195] rcu: RCU restricting CPUs from NR_CPUS=8192 to
>>>> nr_cpu_ids=16.
>>>> [ 0.141198] Trampoline variant of Tasks RCU enabled.
>>>> [ 0.141199] Rude variant of Tasks RCU enabled.
>>>> [ 0.141200] Tracing variant of Tasks RCU enabled.
>>>> [ 0.141201] rcu: RCU calculated value of scheduler-enlistment delay is 25
>>>> jiffies.
>>>> [ 0.141202] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
>>>> [ 0.141227] RCU Tasks: Setting shift to 4 and lim to 1
>>>> rcu_task_cb_adjust=1.
>>>> [ 0.141231] RCU Tasks Rude: Setting shift to 4 and lim to 1
>>>> rcu_task_cb_adjust=1.
>>>> [ 0.141235] RCU Tasks Trace: Setting shift to 4 and lim to 1
>>>> rcu_task_cb_adjust=1.
>>>> [ 0.147244] NR_IRQS: 524544, nr_irqs: 960, preallocated irqs: 16
>>>> [ 0.147513] rcu: srcu_init: Setting srcu_struct sizes based on
>>>> contention.
>>>> [ 0.147681] Console: colour dummy device 80x25
>>>> [ 0.147685] printk: legacy console [tty0] enabled
>>>> [ 0.148030] ACPI: Core revision 20240322
>>>> [ 0.148345] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
>>>> max_idle_ns: 133484882848 ns
>>>> [ 0.148362] APIC: Switch to symmetric I/O mode setup
>>>> [ 0.148364] DMAR-IR: This system BIOS has enabled interrupt remapping
>>>> on a chipset that contains an erratum making that
>>>> feature unstable. To maintain system stability
>>>> interrupt remapping is being disabled. Please
>>>> contact your BIOS vendor for an update
>>>> [ 0.148373] APIC: Switched APIC routing to: physical flat
>>>> [ 0.148941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>>>> [ 0.168361] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
>>>> 0x2686c8f140e, max_idle_ns: 440795237667 ns
>>>> [ 0.168371] Calibrating delay loop (skipped), value calculated using
>>>> timer frequency.. 5345.55 BogoMIPS (lpj=10691104)
>>>> [ 0.168399] CPU0: Thermal monitoring enabled (TM1)
>>>> [ 0.168434] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
>>>> [ 0.168437] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>>>> [ 0.168442] process: using mwait in idle threads
>>>> [ 0.168445] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
>>>> pointer sanitization
>>>> [ 0.168448] Spectre V2 : Mitigation: Retpolines
>>>> [ 0.168450] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB
>>>> on context switch
>>>> [ 0.168451] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
>>>> [ 0.168453] Speculative Store Bypass: Vulnerable
>>>> [ 0.168456] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
>>>> [ 0.168458] MMIO Stale Data: Unknown: No mitigations
>>>> [ 0.168461] x86/fpu: x87 FPU will use FXSAVE
>>>> [ 0.199521] Freeing SMP alternatives memory: 44K
>>>> [ 0.199542] pid_max: default: 32768 minimum: 301
>>>> [ 0.200572] LSM: initializing
>>>> lsm=lockdown,capability,landlock,apparmor,ima,evm
>>>> [ 0.200869] landlock: Up and running.
>>>> [ 0.200909] AppArmor: AppArmor initialized
>>>> [ 0.201323] Mount-cache hash table entries: 32768 (order: 6, 262144
>>>> bytes, linear)
>>>> [ 0.201357] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
>>>> bytes, linear)
>>>> [ 0.315223] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
>>>> (family: 0x6, model: 0x1a, stepping: 0x4)
>>>> [ 0.315671] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR,
>>>> Intel PMU driver.
>>>> [ 0.315695] core: CPU erratum AAJ80 worked around
>>>> [ 0.315697] ... version: 3
>>>> [ 0.315699] ... bit width: 48
>>>> [ 0.315700] ... generic registers: 4
>>>> [ 0.315702] ... value mask: 0000ffffffffffff
>>>> [ 0.315704] ... max period: 000000007fffffff
>>>> [ 0.315705] ... fixed-purpose events: 3
>>>> [ 0.315706] ... event mask: 000000070000000f
>>>> [ 0.315916] signal: max sigframe size: 1440
>>>> [ 0.315941] Estimated ratio of average max frequency by base frequency
>>>> (times 1024): 1075
>>>> [ 0.316366] rcu: Hierarchical SRCU implementation.
>>>> [ 0.316366] rcu: Max phase no-delay instances is 1000.
>>>> [ 0.316366] Timer migration: 2 hierarchy levels; 8 children per group; 2
>>>> crossnode level
>>>> [ 0.316714] NMI watchdog: Enabled. Permanently consumes one hw-PMU
>>>> counter.
>>>> [ 0.317011] smp: Bringing up secondary CPUs ...
>>>> [ 0.317232] smpboot: x86: Booting SMP configuration:
>>>> [ 0.317235] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
>>>> [ 0.328546] MDS CPU bug present and SMT on, data leak possible. See
>>>> https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more
>>>> details.
>>>> [ 0.334368] smp: Brought up 1 node, 8 CPUs
>>>> [ 0.334368] smpboot: Total of 8 processors activated (42764.41 BogoMIPS)
>>>> [ 0.336514] Memory: 11491168K/12573812K available (20480K kernel code,
>>>> 4237K rwdata, 7328K rodata, 4860K init, 5060K bss, 1068464K reserved, 0K
>>>> cma-reserved)
>>>> [ 0.337198] devtmpfs: initialized
>>>> [ 0.337198] x86/mm: Memory block size: 128MB
>>>> [ 0.341390] ACPI: PM: Registering ACPI NVS region [mem
>>>> 0xbf798000-0xbf7dbfff] (278528 bytes)
>>>> [ 0.341390] clocksource: jiffies: mask: 0xffffffff max_cycles:
>>>> 0xffffffff, max_idle_ns: 7645041785100000 ns
>>>> [ 0.341390] futex hash table entries: 4096 (order: 6, 262144 bytes,
>>>> linear)
>>>> [ 0.341390] pinctrl core: initialized pinctrl subsystem
>>>> [ 0.341390] PM: RTC time: 20:18:41, date: 2024-09-16
>>>> [ 0.342165] NET: Registered PF_NETLINK/PF_ROUTE protocol family
>>>> [ 0.342551] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic
>>>> allocations
>>>> [ 0.342790] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic
>>>> allocations
>>>> [ 0.343038] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for
>>>> atomic allocations
>>>> [ 0.343068] audit: initializing netlink subsys (disabled)
>>>> [ 0.343091] audit: type=2000 audit(1726517920.192:1): state=initialized
>>>> audit_enabled=0 res=1
>>>> [ 0.344380] thermal_sys: Registered thermal governor 'fair_share'
>>>> [ 0.344382] thermal_sys: Registered thermal governor 'bang_bang'
>>>> [ 0.344384] thermal_sys: Registered thermal governor 'step_wise'
>>>> [ 0.344385] thermal_sys: Registered thermal governor 'user_space'
>>>> [ 0.344386] thermal_sys: Registered thermal governor 'power_allocator'
>>>> [ 0.344403] EISA bus registered
>>>> [ 0.344424] cpuidle: using governor ladder
>>>> [ 0.344429] cpuidle: using governor menu
>>>> [ 0.344500] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>>>> [ 0.344873] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for
>>>> domain 0000 [bus 00-ff]
>>>> [ 0.344880] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not
>>>> reserved)
>>>> [ 0.344882] PCI: Using configuration type 1 for base access
>>>> [ 0.344998] kprobes: kprobe jump-optimization is enabled. All kprobes are
>>>> optimized if possible.
>>>> [ 0.347235] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
>>>> [ 0.347235] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
>>>> [ 0.351318] ACPI: Added _OSI(Module Device)
>>>> [ 0.351318] ACPI: Added _OSI(Processor Device)
>>>> [ 0.351318] ACPI: Added _OSI(3.0 _SCP Extensions)
>>>> [ 0.351318] ACPI: Added _OSI(Processor Aggregator Device)
>>>> [ 0.366412] ACPI: 2 ACPI AML tables successfully acquired and loaded
>>>> [ 0.401749] ACPI: Dynamic OEM Table Load:
>>>> [ 0.401749] ACPI: SSDT 0xFFFF9DD880974000 001C0C (v01 DpgPmm P001Ist
>>>> 00000011 INTL 20060113)
>>>> [ 0.405367] ACPI: Interpreter enabled
>>>> [ 0.405389] ACPI: PM: (supports S0 S1 S3 S4 S5)
>>>> [ 0.405391] ACPI: Using IOAPIC for interrupt routing
>>>> [ 0.405439] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for
>>>> domain 0000 [bus 00-ff]
>>>> [ 0.406832] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI
>>>> motherboard resource
>>>> [ 0.406849] PCI: Using host bridge windows from ACPI; if necessary, use
>>>> "pci=nocrs" and report a bug
>>>> [ 0.406851] PCI: Using E820 reservations for host bridge windows
>>>> [ 0.407073] ACPI: Enabled 13 GPEs in block 00 to 3F
>>>> [ 0.420700] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>>>> [ 0.420710] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
>>>> ClockPM Segments MSI EDR HPX-Type3]
>>>> [ 0.420718] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug
>>>> PME AER PCIeCapability LTR DPC]
>>>> [ 0.420720] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug
>>>> SHPCHotplug PME AER PCIeCapability LTR DPC]
>>>> [ 0.420722] acpi PNP0A08:00: _OSC: platform retains control of PCIe
>>>> features (AE_NOT_FOUND)
>>>> [ 0.421217] PCI host bridge to bus 0000:00
>>>> [ 0.421222] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
>>>> [ 0.421225] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
>>>> [ 0.421227] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
>>>> window]
>>>> [ 0.421229] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff
>>>> window]
>>>> [ 0.421231] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff
>>>> window]
>>>> [ 0.421233] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff
>>>> window]
>>>> [ 0.421235] pci_bus 0000:00: root bus resource [bus 00-ff]
>>>> [ 0.421259] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 PCIe
>>>> Root Port
>>>> [ 0.421288] pci 0000:00:00.0: enabling Extended Tags
>>>> [ 0.421332] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.421435] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 PCIe
>>>> Root Port
>>>> [ 0.421452] pci 0000:00:01.0: PCI bridge to [bus 01]
>>>> [ 0.421469] pci 0000:00:01.0: enabling Extended Tags
>>>> [ 0.421514] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.421651] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 PCIe
>>>> Root Port
>>>> [ 0.421673] pci 0000:00:03.0: PCI bridge to [bus 02-04]
>>>> [ 0.421677] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
>>>> [ 0.421680] pci 0000:00:03.0: bridge window [mem 0xfb600000-0xfb8fffff]
>>>> [ 0.421688] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xdfffffff
>>>> 64bit pref]
>>>> [ 0.421695] pci 0000:00:03.0: enabling Extended Tags
>>>> [ 0.421740] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.421868] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 PCIe
>>>> Root Port
>>>> [ 0.421885] pci 0000:00:07.0: PCI bridge to [bus 05]
>>>> [ 0.421903] pci 0000:00:07.0: enabling Extended Tags
>>>> [ 0.421947] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.422074] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 PCIe
>>>> Root Complex Integrated Endpoint
>>>> [ 0.422186] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 PCIe
>>>> Root Complex Integrated Endpoint
>>>> [ 0.422294] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 PCIe
>>>> Root Complex Integrated Endpoint
>>>> [ 0.422397] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
>>>> conventional PCI endpoint
>>>> [ 0.422490] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
>>>> conventional PCI endpoint
>>>> [ 0.422531] pci 0000:00:1a.0: BAR 4 [io 0x9800-0x981f]
>>>> [ 0.422653] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
>>>> conventional PCI endpoint
>>>> [ 0.422694] pci 0000:00:1a.1: BAR 4 [io 0x9880-0x989f]
>>>> [ 0.422825] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
>>>> conventional PCI endpoint
>>>> [ 0.422865] pci 0000:00:1a.2: BAR 4 [io 0x9c00-0x9c1f]
>>>> [ 0.423001] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
>>>> conventional PCI endpoint
>>>> [ 0.423018] pci 0000:00:1a.7: BAR 0 [mem 0xfb5ff000-0xfb5ff3ff]
>>>> [ 0.423099] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>>> [ 0.423200] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 PCIe
>>>> Root Complex Integrated Endpoint
>>>> [ 0.423218] pci 0000:00:1b.0: BAR 0 [mem 0xfb5f8000-0xfb5fbfff 64bit]
>>>> [ 0.423294] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.423384] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 PCIe
>>>> Root Port
>>>> [ 0.423410] pci 0000:00:1c.0: PCI bridge to [bus 0a]
>>>> [ 0.423424] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff
>>>> 64bit pref]
>>>> [ 0.423478] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.423599] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400 PCIe
>>>> Root Port
>>>> [ 0.423626] pci 0000:00:1c.1: PCI bridge to [bus 09]
>>>> [ 0.423632] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbdfffff]
>>>> [ 0.423694] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>>>> [ 0.423824] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400 PCIe
>>>> Root Port
>>>> [ 0.423850] pci 0000:00:1c.2: PCI bridge to [bus 08]
>>>> [ 0.423855] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
>>>> [ 0.423858] pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
>>>> [ 0.423919] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>>>> [ 0.424038] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 PCIe
>>>> Root Port
>>>> [ 0.424064] pci 0000:00:1c.4: PCI bridge to [bus 07]
>>>> [ 0.424069] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
>>>> [ 0.424072] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
>>>> [ 0.424133] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>>>> [ 0.424253] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 PCIe
>>>> Root Port
>>>> [ 0.424279] pci 0000:00:1c.5: PCI bridge to [bus 06]
>>>> [ 0.424284] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
>>>> [ 0.424287] pci 0000:00:1c.5: bridge window [mem 0xfb900000-0xfb9fffff]
>>>> [ 0.424348] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>>>> [ 0.424477] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
>>>> conventional PCI endpoint
>>>> [ 0.424517] pci 0000:00:1d.0: BAR 4 [io 0x9080-0x909f]
>>>> [ 0.424643] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
>>>> conventional PCI endpoint
>>>> [ 0.424684] pci 0000:00:1d.1: BAR 4 [io 0x9400-0x941f]
>>>> [ 0.424809] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
>>>> conventional PCI endpoint
>>>> [ 0.424851] pci 0000:00:1d.2: BAR 4 [io 0x9480-0x949f]
>>>> [ 0.424984] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
>>>> conventional PCI endpoint
>>>> [ 0.425001] pci 0000:00:1d.7: BAR 0 [mem 0xfb5fe000-0xfb5fe3ff]
>>>> [ 0.425082] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>>> [ 0.425178] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>>>> conventional PCI bridge
>>>> [ 0.425203] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
>>>> [ 0.425208] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
>>>> [ 0.425211] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
>>>> [ 0.425335] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
>>>> conventional PCI endpoint
>>>> [ 0.425412] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6
>>>> ACPI/GPIO/TCO
>>>> [ 0.425417] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6
>>>> GPIO
>>>> [ 0.425420] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294
>>>> (mask 0003)
>>>> [ 0.425425] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700
>>>> (mask 001f)
>>>> [ 0.425575] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
>>>> conventional PCI endpoint
>>>> [ 0.425589] pci 0000:00:1f.2: BAR 0 [io 0x8c00-0x8c07]
>>>> [ 0.425596] pci 0000:00:1f.2: BAR 1 [io 0x8880-0x8883]
>>>> [ 0.425604] pci 0000:00:1f.2: BAR 2 [io 0x8800-0x8807]
>>>> [ 0.425611] pci 0000:00:1f.2: BAR 3 [io 0x8480-0x8483]
>>>> [ 0.425618] pci 0000:00:1f.2: BAR 4 [io 0x8400-0x841f]
>>>> [ 0.425625] pci 0000:00:1f.2: BAR 5 [mem 0xfb5fc000-0xfb5fc7ff]
>>>> [ 0.425666] pci 0000:00:1f.2: PME# supported from D3hot
>>>> [ 0.425760] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
>>>> conventional PCI endpoint
>>>> [ 0.425777] pci 0000:00:1f.3: BAR 0 [mem 0xfb5fd000-0xfb5fd0ff 64bit]
>>>> [ 0.425797] pci 0000:00:1f.3: BAR 4 [io 0x0400-0x041f]
>>>> [ 0.425902] pci 0000:00:01.0: PCI bridge to [bus 01]
>>>> [ 0.425962] pci 0000:02:00.0: [1002:1478] type 01 class 0x060400 PCIe
>>>> Switch Upstream Port
>>>> [ 0.425977] pci 0000:02:00.0: BAR 0 [mem 0xfb6fc000-0xfb6fffff]
>>>> [ 0.425992] pci 0000:02:00.0: PCI bridge to [bus 03-04]
>>>> [ 0.425999] pci 0000:02:00.0: bridge window [io 0xa000-0xafff]
>>>> [ 0.426002] pci 0000:02:00.0: bridge window [mem 0xfb700000-0xfb8fffff]
>>>> [ 0.426012] pci 0000:02:00.0: bridge window [mem 0xcfe00000-0xdfffffff
>>>> 64bit pref]
>>>> [ 0.426097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.426163] pci 0000:02:00.0: 16.000 Gb/s available PCIe bandwidth,
>>>> limited by 5.0 GT/s PCIe x4 link at 0000:00:03.0 (capable of 63.012 Gb/s
>>>> with 16.0 GT/s PCIe x4 link)
>>>> [ 0.436388] pci 0000:00:03.0: PCI bridge to [bus 02-04]
>>>> [ 0.436467] pci 0000:03:00.0: [1002:1479] type 01 class 0x060400 PCIe
>>>> Switch Downstream Port
>>>> [ 0.436495] pci 0000:03:00.0: PCI bridge to [bus 04]
>>>> [ 0.436501] pci 0000:03:00.0: bridge window [io 0xa000-0xafff]
>>>> [ 0.436505] pci 0000:03:00.0: bridge window [mem 0xfb700000-0xfb8fffff]
>>>> [ 0.436515] pci 0000:03:00.0: bridge window [mem 0xcfe00000-0xdfffffff
>>>> 64bit pref]
>>>> [ 0.436600] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.436763] pci 0000:02:00.0: PCI bridge to [bus 03-04]
>>>> [ 0.436832] pci 0000:04:00.0: [1002:743f] type 00 class 0x030000 PCIe
>>>> Legacy Endpoint
>>>> [ 0.436852] pci 0000:04:00.0: BAR 0 [mem 0xd0000000-0xdfffffff 64bit
>>>> pref]
>>>> [ 0.436864] pci 0000:04:00.0: BAR 2 [mem 0xcfe00000-0xcfffffff 64bit
>>>> pref]
>>>> [ 0.436872] pci 0000:04:00.0: BAR 4 [io 0xa000-0xa0ff]
>>>> [ 0.436880] pci 0000:04:00.0: BAR 5 [mem 0xfb700000-0xfb7fffff]
>>>> [ 0.436888] pci 0000:04:00.0: ROM [mem 0xfb8c0000-0xfb8dffff pref]
>>>> [ 0.436925] pci 0000:04:00.0: Video device with shadowed ROM at [mem
>>>> 0x000c0000-0x000dffff]
>>>> [ 0.436985] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
>>>> [ 0.437058] pci 0000:04:00.0: 16.000 Gb/s available PCIe bandwidth,
>>>> limited by 5.0 GT/s PCIe x4 link at 0000:00:03.0 (capable of 252.048 Gb/s
>>>> with 16.0 GT/s PCIe x16 link)
>>>> [ 0.437158] pci 0000:04:00.1: [1002:ab28] type 00 class 0x040300 PCIe
>>>> Legacy Endpoint
>>>> [ 0.437173] pci 0000:04:00.1: BAR 0 [mem 0xfb8fc000-0xfb8fffff]
>>>> [ 0.437271] pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold
>>>> [ 0.437411] pci 0000:03:00.0: PCI bridge to [bus 04]
>>>> [ 0.437472] pci 0000:00:07.0: PCI bridge to [bus 05]
>>>> [ 0.437519] pci 0000:00:1c.0: PCI bridge to [bus 0a]
>>>> [ 0.437590] pci 0000:09:00.0: [14f1:8880] type 00 class 0x040000 PCIe
>>>> Endpoint
>>>> [ 0.437623] pci 0000:09:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit]
>>>> [ 0.437793] pci 0000:09:00.0: supports D1 D2
>>>> [ 0.437794] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot
>>>> [ 0.437927] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You
>>>> can enable it with 'pcie_aspm=force'
>>>> [ 0.437941] pci 0000:00:1c.1: PCI bridge to [bus 09]
>>>> [ 0.438009] pci 0000:08:00.0: [11ab:4364] type 00 class 0x020000 PCIe
>>>> Legacy Endpoint
>>>> [ 0.438036] pci 0000:08:00.0: BAR 0 [mem 0xfbbfc000-0xfbbfffff 64bit]
>>>> [ 0.438048] pci 0000:08:00.0: BAR 2 [io 0xd800-0xd8ff]
>>>> [ 0.438088] pci 0000:08:00.0: ROM [mem 0xfbbc0000-0xfbbdffff pref]
>>>> [ 0.438159] pci 0000:08:00.0: supports D1 D2
>>>> [ 0.438161] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>>>> [ 0.438257] pci 0000:00:1c.2: ASPM: current common clock configuration is
>>>> inconsistent, reconfiguring
>>>> [ 0.448394] pci 0000:00:1c.2: PCI bridge to [bus 08]
>>>> [ 0.448486] pci 0000:07:00.0: [11ab:6121] type 00 class 0x01018f PCIe
>>>> Legacy Endpoint
>>>> [ 0.448506] pci 0000:07:00.0: BAR 0 [io 0xcc00-0xcc07]
>>>> [ 0.448518] pci 0000:07:00.0: BAR 1 [io 0xc880-0xc883]
>>>> [ 0.448529] pci 0000:07:00.0: BAR 2 [io 0xc800-0xc807]
>>>> [ 0.448540] pci 0000:07:00.0: BAR 3 [io 0xc480-0xc483]
>>>> [ 0.448551] pci 0000:07:00.0: BAR 4 [io 0xc400-0xc40f]
>>>> [ 0.448562] pci 0000:07:00.0: BAR 5 [mem 0xfbaffc00-0xfbafffff]
>>>> [ 0.448636] pci 0000:07:00.0: supports D1
>>>> [ 0.448638] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
>>>> [ 0.448727] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You
>>>> can enable it with 'pcie_aspm=force'
>>>> [ 0.448739] pci 0000:00:1c.4: PCI bridge to [bus 07]
>>>> [ 0.448811] pci 0000:06:00.0: [11ab:4364] type 00 class 0x020000 PCIe
>>>> Legacy Endpoint
>>>> [ 0.448838] pci 0000:06:00.0: BAR 0 [mem 0xfb9fc000-0xfb9fffff 64bit]
>>>> [ 0.448850] pci 0000:06:00.0: BAR 2 [io 0xb800-0xb8ff]
>>>> [ 0.448891] pci 0000:06:00.0: ROM [mem 0xfb9c0000-0xfb9dffff pref]
>>>> [ 0.448963] pci 0000:06:00.0: supports D1 D2
>>>> [ 0.448965] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>>>> [ 0.449068] pci 0000:00:1c.5: ASPM: current common clock configuration is
>>>> inconsistent, reconfiguring
>>>> [ 0.460394] pci 0000:00:1c.5: PCI bridge to [bus 06]
>>>> [ 0.460427] pci_bus 0000:0b: extended config space not accessible
>>>> [ 0.460468] pci 0000:0b:02.0: [1106:3044] type 00 class 0x0c0010
>>>> conventional PCI endpoint
>>>> [ 0.460485] pci 0000:0b:02.0: BAR 0 [mem 0xfbeff000-0xfbeff7ff]
>>>> [ 0.460495] pci 0000:0b:02.0: BAR 1 [io 0xec00-0xec7f]
>>>> [ 0.460565] pci 0000:0b:02.0: supports D2
>>>> [ 0.460567] pci 0000:0b:02.0: PME# supported from D2 D3hot D3cold
>>>> [ 0.460650] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
>>>> [ 0.460660] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window]
>>>> (subtractive decode)
>>>> [ 0.460662] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window]
>>>> (subtractive decode)
>>>> [ 0.460664] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff
>>>> window] (subtractive decode)
>>>> [ 0.460666] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff
>>>> window] (subtractive decode)
>>>> [ 0.460668] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff
>>>> window] (subtractive decode)
>>>> [ 0.460670] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff
>>>> window] (subtractive decode)
>>>> [ 0.461561] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
>>>> [ 0.461631] ACPI: PCI: Interrupt link LNKB configured for IRQ 5
>>>> [ 0.461700] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
>>>> [ 0.461768] ACPI: PCI: Interrupt link LNKD configured for IRQ 14
>>>> [ 0.461835] ACPI: PCI: Interrupt link LNKE configured for IRQ 15
>>>> [ 0.461903] ACPI: PCI: Interrupt link LNKF configured for IRQ 3
>>>> [ 0.461971] ACPI: PCI: Interrupt link LNKG configured for IRQ 7
>>>> [ 0.462039] ACPI: PCI: Interrupt link LNKH configured for IRQ 4
>>>> [ 0.462216] iommu: Default domain type: Translated
>>>> [ 0.462216] iommu: DMA domain TLB invalidation policy: lazy mode
>>>> [ 0.462216] SCSI subsystem initialized
>>>> [ 0.462216] libata version 3.00 loaded.
>>>> [ 0.462216] ACPI: bus type USB registered
>>>> [ 0.462216] usbcore: registered new interface driver usbfs
>>>> [ 0.462216] usbcore: registered new interface driver hub
>>>> [ 0.462216] usbcore: registered new device driver usb
>>>> [ 0.462216] pps_core: LinuxPPS API ver. 1 registered
>>>> [ 0.462216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
>>>> Giometti<giometti@...ux.it>
>>>> [ 0.462216] PTP clock support registered
>>>> [ 0.462216] EDAC MC: Ver: 3.0.0
>>>> [ 0.462216] NetLabel: Initializing
>>>> [ 0.462216] NetLabel: domain hash size = 128
>>>> [ 0.462216] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
>>>> [ 0.462216] NetLabel: unlabeled traffic allowed by default
>>>> [ 0.462216] PCI: Using ACPI for IRQ routing
>>>> [ 0.468990] PCI: Discovered peer bus ff
>>>> [ 0.468992] PCI: root bus ff: using default resources
>>>> [ 0.468994] PCI: Probing PCI hardware (bus ff)
>>>> [ 0.469021] PCI host bridge to bus 0000:ff
>>>> [ 0.469023] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
>>>> [ 0.469026] pci_bus 0000:ff: root bus resource [mem
>>>> 0x00000000-0xfffffffff]
>>>> [ 0.469028] pci_bus 0000:ff: No busn resource found for root bus, will
>>>> use [bus ff-ff]
>>>> [ 0.469030] pci_bus 0000:ff: busn_res: can not insert [bus ff] under
>>>> domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
>>>> [ 0.469038] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469094] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469145] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469192] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469241] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469290] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469343] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469391] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469441] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469488] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469535] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469585] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469632] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469679] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469731] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469782] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469829] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469875] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469925] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
>>>> conventional PCI endpoint
>>>> [ 0.469981] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
>>>> [ 0.469984] pci_bus 0000:ff: busn_res: can not insert [bus ff] under
>>>> domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
>>>> [ 0.469992] PCI: pci_cache_line_size set to 64 bytes
>>>> [ 0.470083] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
>>>> [ 0.470085] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
>>>> [ 0.470108] pci 0000:04:00.0: vgaarb: setting as boot VGA device
>>>> [ 0.470108] pci 0000:04:00.0: vgaarb: bridge control possible
>>>> [ 0.470108] pci 0000:04:00.0: vgaarb: VGA device added:
>>>> decodes=io+mem,owns=io+mem,locks=none
>>>> [ 0.470108] vgaarb: loaded
>>>> [ 0.470108] hpet: 4 channels of 0 reserved for per-cpu timers
>>>> [ 0.470108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>>>> [ 0.470108] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>>>> [ 0.472412] clocksource: Switched to clocksource tsc-early
>>>> [ 0.474123] VFS: Disk quotas dquot_6.6.0
>>>> [ 0.474178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
>>>> bytes)
>>>> [ 0.474353] AppArmor: AppArmor Filesystem Enabled
>>>> [ 0.474372] pnp: PnP ACPI init
>>>> [ 0.474452] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
>>>> [ 0.474456] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
>>>> [ 0.474458] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
>>>> [ 0.474460] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
>>>> [ 0.474462] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be
>>>> reserved
>>>> [ 0.474465] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
>>>> [ 0.474787] system 00:02: [io 0x0290-0x029f] has been reserved
>>>> [ 0.475064] system 00:03: [io 0x04d0-0x04d1] has been reserved
>>>> [ 0.475068] system 00:03: [io 0x0800-0x087f] has been reserved
>>>> [ 0.475070] system 00:03: [io 0x0500-0x057f] could not be reserved
>>>> [ 0.475072] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
>>>> [ 0.475075] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
>>>> [ 0.475077] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
>>>> [ 0.475240] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
>>>> [ 0.475414] system 00:05: [mem 0xfec00000-0xfec00fff] could not be
>>>> reserved
>>>> [ 0.475418] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
>>>> [ 0.475547] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
>>>> [ 0.475756] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it
>>>> overlaps 0000:04:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
>>>> [ 0.475794] system 00:07: [mem 0x00000000-0x0009ffff] could not be
>>>> reserved
>>>> [ 0.475797] system 00:07: [mem 0x000e0000-0x000fffff] could not be
>>>> reserved
>>>> [ 0.475799] system 00:07: [mem 0x00100000-0xbfffffff] could not be
>>>> reserved
>>>> [ 0.475801] system 00:07: [mem 0xfed90000-0xffffffff] could not be
>>>> reserved
>>>> [ 0.475968] pnp: PnP ACPI: found 8 devices
>>>> [ 0.482412] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
>>>> max_idle_ns: 2085701024 ns
>>>> [ 0.482668] NET: Registered PF_INET protocol family
>>>> [ 0.482922] IP idents hash table entries: 262144 (order: 9, 2097152
>>>> bytes, linear)
>>>> [ 0.487040] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5,
>>>> 131072 bytes, linear)
>>>> [ 0.487090] Table-perturb hash table entries: 65536 (order: 6, 262144
>>>> bytes, linear)
>>>> [ 0.487211] TCP established hash table entries: 131072 (order: 8, 1048576
>>>> bytes, linear)
>>>> [ 0.487622] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes,
>>>> linear)
>>>> [ 0.487923] TCP: Hash tables configured (established 131072 bind 65536)
>>>> [ 0.488158] MPTCP token hash table entries: 16384 (order: 6, 393216
>>>> bytes, linear)
>>>> [ 0.488251] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
>>>> [ 0.488324] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes,
>>>> linear)
>>>> [ 0.488454] NET: Registered PF_UNIX/PF_LOCAL protocol family
>>>> [ 0.488463] NET: Registered PF_XDP protocol family
>>>> [ 0.488480] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
>>>> 0a] add_size 1000
>>>> [ 0.488484] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff]
>>>> to [bus 0a] add_size 200000 add_align 100000
>>>> [ 0.488488] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus
>>>> 09] add_size 1000
>>>> [ 0.488491] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff
>>>> 64bit pref] to [bus 09] add_size 200000 add_align 100000
>>>> [ 0.488494] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff
>>>> 64bit pref] to [bus 08] add_size 200000 add_align 100000
>>>> [ 0.488497] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff
>>>> 64bit pref] to [bus 07] add_size 200000 add_align 100000
>>>> [ 0.488500] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff
>>>> 64bit pref] to [bus 06] add_size 200000 add_align 100000
>>>> [ 0.488517] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]:
>>>> assigned
>>>> [ 0.488520] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff
>>>> 64bit pref]: assigned
>>>> [ 0.488524] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff
>>>> 64bit pref]: assigned
>>>> [ 0.488526] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff
>>>> 64bit pref]: assigned
>>>> [ 0.488529] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff
>>>> 64bit pref]: assigned
>>>> [ 0.488532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]: assigned
>>>> [ 0.488535] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]: assigned
>>>> [ 0.488538] pci 0000:00:01.0: PCI bridge to [bus 01]
>>>> [ 0.488548] pci 0000:03:00.0: PCI bridge to [bus 04]
>>>> [ 0.488550] pci 0000:03:00.0: bridge window [io 0xa000-0xafff]
>>>> [ 0.488555] pci 0000:03:00.0: bridge window [mem 0xfb700000-0xfb8fffff]
>>>> [ 0.488559] pci 0000:03:00.0: bridge window [mem 0xcfe00000-0xdfffffff
>>>> 64bit pref]
>>>> [ 0.488564] pci 0000:02:00.0: PCI bridge to [bus 03-04]
>>>> [ 0.488567] pci 0000:02:00.0: bridge window [io 0xa000-0xafff]
>>>> [ 0.488571] pci 0000:02:00.0: bridge window [mem 0xfb700000-0xfb8fffff]
>>>> [ 0.488575] pci 0000:02:00.0: bridge window [mem 0xcfe00000-0xdfffffff
>>>> 64bit pref]
>>>> [ 0.488580] pci 0000:00:03.0: PCI bridge to [bus 02-04]
>>>> [ 0.488583] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
>>>> [ 0.488586] pci 0000:00:03.0: bridge window [mem 0xfb600000-0xfb8fffff]
>>>> [ 0.488590] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xdfffffff
>>>> 64bit pref]
>>>> [ 0.488594] pci 0000:00:07.0: PCI bridge to [bus 05]
>>>> [ 0.488603] pci 0000:00:1c.0: PCI bridge to [bus 0a]
>>>> [ 0.488605] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
>>>> [ 0.488609] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
>>>> [ 0.488612] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff
>>>> 64bit pref]
>>>> [ 0.488618] pci 0000:00:1c.1: PCI bridge to [bus 09]
>>>> [ 0.488620] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
>>>> [ 0.488624] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbdfffff]
>>>> [ 0.488628] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff
>>>> 64bit pref]
>>>> [ 0.488633] pci 0000:00:1c.2: PCI bridge to [bus 08]
>>>> [ 0.488635] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
>>>> [ 0.488639] pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
>>>> [ 0.488643] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff
>>>> 64bit pref]
>>>> [ 0.488648] pci 0000:00:1c.4: PCI bridge to [bus 07]
>>>> [ 0.488650] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
>>>> [ 0.488654] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
>>>> [ 0.488658] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff
>>>> 64bit pref]
>>>> [ 0.488663] pci 0000:00:1c.5: PCI bridge to [bus 06]
>>>> [ 0.488665] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
>>>> [ 0.488669] pci 0000:00:1c.5: bridge window [mem 0xfb900000-0xfb9fffff]
>>>> [ 0.488673] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff
>>>> 64bit pref]
>>>> [ 0.488678] pci 0000:00:1e.0: PCI bridge to [bus 0b]
>>>> [ 0.488681] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
>>>> [ 0.488685] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
>>>> [ 0.488692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
>>>> [ 0.488694] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
>>>> [ 0.488696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
>>>> window]
>>>> [ 0.488698] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff
>>>> window]
>>>> [ 0.488700] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff
>>>> window]
>>>> [ 0.488702] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff
>>>> window]
>>>> [ 0.488704] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
>>>> [ 0.488705] pci_bus 0000:02: resource 1 [mem 0xfb600000-0xfb8fffff]
>>>> [ 0.488707] pci_bus 0000:02: resource 2 [mem 0xcfe00000-0xdfffffff 64bit
>>>> pref]
>>>> [ 0.488709] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
>>>> [ 0.488711] pci_bus 0000:03: resource 1 [mem 0xfb700000-0xfb8fffff]
>>>> [ 0.488712] pci_bus 0000:03: resource 2 [mem 0xcfe00000-0xdfffffff 64bit
>>>> pref]
>>>> [ 0.488714] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
>>>> [ 0.488716] pci_bus 0000:04: resource 1 [mem 0xfb700000-0xfb8fffff]
>>>> [ 0.488718] pci_bus 0000:04: resource 2 [mem 0xcfe00000-0xdfffffff 64bit
>>>> pref]
>>>> [ 0.488720] pci_bus 0000:0a: resource 0 [io 0x1000-0x1fff]
>>>> [ 0.488722] pci_bus 0000:0a: resource 1 [mem 0xc0000000-0xc01fffff]
>>>> [ 0.488723] pci_bus 0000:0a: resource 2 [mem 0xfaf00000-0xfaffffff 64bit
>>>> pref]
>>>> [ 0.488725] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
>>>> [ 0.488727] pci_bus 0000:09: resource 1 [mem 0xfbc00000-0xfbdfffff]
>>>> [ 0.488728] pci_bus 0000:09: resource 2 [mem 0xc0200000-0xc03fffff 64bit
>>>> pref]
>>>> [ 0.488730] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
>>>> [ 0.488732] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
>>>> [ 0.488734] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit
>>>> pref]
>>>> [ 0.488736] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
>>>> [ 0.488737] pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff]
>>>> [ 0.488739] pci_bus 0000:07: resource 2 [mem 0xc0600000-0xc07fffff 64bit
>>>> pref]
>>>> [ 0.488741] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
>>>> [ 0.488743] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff]
>>>> [ 0.488744] pci_bus 0000:06: resource 2 [mem 0xc0800000-0xc09fffff 64bit
>>>> pref]
>>>> [ 0.488746] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff]
>>>> [ 0.488748] pci_bus 0000:0b: resource 1 [mem 0xfbe00000-0xfbefffff]
>>>> [ 0.488750] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7 window]
>>>> [ 0.488751] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff window]
>>>> [ 0.488753] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff
>>>> window]
>>>> [ 0.488755] pci_bus 0000:0b: resource 7 [mem 0x000d0000-0x000dffff
>>>> window]
>>>> [ 0.488757] pci_bus 0000:0b: resource 8 [mem 0xc0000000-0xdfffffff
>>>> window]
>>>> [ 0.488758] pci_bus 0000:0b: resource 9 [mem 0xf0000000-0xfed8ffff
>>>> window]
>>>> [ 0.488836] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
>>>> [ 0.488838] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
>>>> [ 0.490705] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
>>>> [ 0.490763] PCI: CLS 256 bytes, default 64
>>>> [ 0.490837] DMAR: Host address width 39
>>>> [ 0.490840] DMAR: DRHD base: 0x000000fbfff000 flags: 0x0
>>>> [ 0.490855] DMAR: dmar0: reg_base_addr fbfff000 ver 1:0 cap
>>>> c9008010e60262 ecap f0207a
>>>> [ 0.490859] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
>>>> [ 0.490868] DMAR: dmar1: reg_base_addr fbffe000 ver 1:0 cap
>>>> c90780106f0462 ecap f020fe
>>>> [ 0.490872] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
>>>> [ 0.490874] DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff
>>>> [ 0.490876] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR
>>>> [0x00000000bf7dc000-0x00000000bf7dbfff]
>>>> BIOS vendor: American Megatrends Inc.; Ver: 2209 ; Product
>>>> Version: System Version
>>>> [ 0.490885] DMAR: ATSR flags: 0x0
>>>> [ 0.490916] Trying to unpack rootfs image as initramfs...
>>>> [ 0.490924] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>>> [ 0.490926] software IO TLB: mapped [mem
>>>> 0x00000000bb780000-0x00000000bf780000] (64MB)
>>>> [ 0.498853] Initialise system trusted keyrings
>>>> [ 0.498871] Key type blacklist registered
>>>> [ 0.498929] workingset: timestamp_bits=36 max_order=22 bucket_order=0
>>>> [ 0.498939] zbud: loaded
>>>> [ 0.500605] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>>>> [ 0.500783] fuse: init (API version 7.40)
>>>> [ 0.501317] integrity: Platform Keyring initialized
>>>> [ 0.518817] Key type asymmetric registered
>>>> [ 0.518823] Asymmetric key parser 'x509' registered
>>>> [ 0.518900] Block layer SCSI generic (bsg) driver version 0.4 loaded
>>>> (major 243)
>>>> [ 0.518995] io scheduler mq-deadline registered
>>>> [ 0.519607] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
>>>> [ 0.519816] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
>>>> [ 0.520733] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>>>> [ 0.520780] Driver vt8623fb not loading because of nomodeset parameter
>>>> [ 0.521646] input: Power Button as
>>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>>>> [ 0.521681] ACPI: button: Power Button [PWRB]
>>>> [ 0.521720] input: Power Button as
>>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>>>> [ 0.521846] ACPI: button: Power Button [PWRF]
>>>> [ 0.523498] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>>>> [ 0.527493] Linux agpgart interface v0.103
>>>> [ 0.532004] loop: module loaded
>>>> [ 0.532510] tun: Universal TUN/TAP device driver, 1.6
>>>> [ 0.532598] PPP generic driver version 2.4.2
>>>> [ 0.532913] VFIO - User Level meta-driver version: 0.3
>>>> [ 0.533261] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>>>> [ 0.533272] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
>>>> number 1
>>>> [ 0.533282] uhci_hcd 0000:00:1a.0: detected 2 ports
>>>> [ 0.533318] uhci_hcd 0000:00:1a.0: irq 16, io port 0x00009800
>>>> [ 0.533385] usb usb1: New USB device found, idVendor=1d6b,
>>>> idProduct=0001, bcdDevice= 6.11
>>>> [ 0.533388] usb usb1: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 0.533390] usb usb1: Product: UHCI Host Controller
>>>> [ 0.533392] usb usb1: Manufacturer: Linux 6.11.0 uhci_hcd
>>>> [ 0.533393] usb usb1: SerialNumber: 0000:00:1a.0
>>>> [ 0.533563] hub 1-0:1.0: USB hub found
>>>> [ 0.533572] hub 1-0:1.0: 2 ports detected
>>>> [ 0.533852] ehci-pci 0000:00:1a.7: EHCI Host Controller
>>>> [ 0.533861] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus
>>>> number 2
>>>> [ 0.533874] ehci-pci 0000:00:1a.7: debug port 1
>>>> [ 0.537796] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfb5ff000
>>>> [ 0.553037] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>>>> [ 0.553115] usb usb2: New USB device found, idVendor=1d6b,
>>>> idProduct=0002, bcdDevice= 6.11
>>>> [ 0.553119] usb usb2: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 0.553121] usb usb2: Product: EHCI Host Controller
>>>> [ 0.553122] usb usb2: Manufacturer: Linux 6.11.0 ehci_hcd
>>>> [ 0.553124] usb usb2: SerialNumber: 0000:00:1a.7
>>>> [ 0.553411] hub 2-0:1.0: USB hub found
>>>> [ 0.553424] hub 2-0:1.0: 6 ports detected
>>>> [ 0.581085] hub 1-0:1.0: USB hub found
>>>> [ 0.581097] hub 1-0:1.0: 2 ports detected
>>>> [ 0.581279] ehci-pci 0000:00:1d.7: EHCI Host Controller
>>>> [ 0.581289] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus
>>>> number 3
>>>> [ 0.581304] ehci-pci 0000:00:1d.7: debug port 1
>>>> [ 0.585225] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb5fe000
>>>> [ 0.601021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>>>> [ 0.601099] usb usb3: New USB device found, idVendor=1d6b,
>>>> idProduct=0002, bcdDevice= 6.11
>>>> [ 0.601103] usb usb3: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 0.601105] usb usb3: Product: EHCI Host Controller
>>>> [ 0.601107] usb usb3: Manufacturer: Linux 6.11.0 ehci_hcd
>>>> [ 0.601108] usb usb3: SerialNumber: 0000:00:1d.7
>>>> [ 0.601354] hub 3-0:1.0: USB hub found
>>>> [ 0.601366] hub 3-0:1.0: 6 ports detected
>>>> [ 0.601649] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>>>> [ 0.601659] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
>>>> number 4
>>>> [ 0.601668] uhci_hcd 0000:00:1a.1: detected 2 ports
>>>> [ 0.601701] uhci_hcd 0000:00:1a.1: irq 21, io port 0x00009880
>>>> [ 0.601762] usb usb4: New USB device found, idVendor=1d6b,
>>>> idProduct=0001, bcdDevice= 6.11
>>>> [ 0.601765] usb usb4: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 0.601767] usb usb4: Product: UHCI Host Controller
>>>> [ 0.601768] usb usb4: Manufacturer: Linux 6.11.0 uhci_hcd
>>>> [ 0.601770] usb usb4: SerialNumber: 0000:00:1a.1
>>>> [ 0.601959] hub 4-0:1.0: USB hub found
>>>> [ 0.601971] hub 4-0:1.0: 2 ports detected
>>>> [ 0.602279] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>>>> [ 0.602285] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
>>>> number 5
>>>> [ 0.602292] uhci_hcd 0000:00:1a.2: detected 2 ports
>>>> [ 0.602319] uhci_hcd 0000:00:1a.2: irq 19, io port 0x00009c00
>>>> [ 0.602378] usb usb5: New USB device found, idVendor=1d6b,
>>>> idProduct=0001, bcdDevice= 6.11
>>>> [ 0.602381] usb usb5: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 0.602383] usb usb5: Product: UHCI Host Controller
>>>> [ 0.602385] usb usb5: Manufacturer: Linux 6.11.0 uhci_hcd
>>>> [ 0.602387] usb usb5: SerialNumber: 0000:00:1a.2
>>>> [ 0.602571] hub 5-0:1.0: USB hub found
>>>> [ 0.602582] hub 5-0:1.0: 2 ports detected
>>>> [ 0.602821] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>>>> [ 0.602827] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
>>>> number 6
>>>> [ 0.602834] uhci_hcd 0000:00:1d.0: detected 2 ports
>>>> [ 0.602852] uhci_hcd 0000:00:1d.0: irq 23, io port 0x00009080
>>>> [ 0.602905] usb usb6: New USB device found, idVendor=1d6b,
>>>> idProduct=0001, bcdDevice= 6.11
>>>> [ 0.602908] usb usb6: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 0.602910] usb usb6: Product: UHCI Host Controller
>>>> [ 0.602911] usb usb6: Manufacturer: Linux 6.11.0 uhci_hcd
>>>> [ 0.602913] usb usb6: SerialNumber: 0000:00:1d.0
>>>> [ 0.603096] hub 6-0:1.0: USB hub found
>>>> [ 0.603108] hub 6-0:1.0: 2 ports detected
>>>> [ 0.603355] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>>>> [ 0.603366] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
>>>> number 7
>>>> [ 0.603373] uhci_hcd 0000:00:1d.1: detected 2 ports
>>>> [ 0.603390] uhci_hcd 0000:00:1d.1: irq 19, io port 0x00009400
>>>> [ 0.603444] usb usb7: New USB device found, idVendor=1d6b,
>>>> idProduct=0001, bcdDevice= 6.11
>>>> [ 0.603447] usb usb7: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 0.603449] usb usb7: Product: UHCI Host Controller
>>>> [ 0.603450] usb usb7: Manufacturer: Linux 6.11.0 uhci_hcd
>>>> [ 0.603452] usb usb7: SerialNumber: 0000:00:1d.1
>>>> [ 0.603636] hub 7-0:1.0: USB hub found
>>>> [ 0.603648] hub 7-0:1.0: 2 ports detected
>>>> [ 0.603900] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>>>> [ 0.603907] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
>>>> number 8
>>>> [ 0.603913] uhci_hcd 0000:00:1d.2: detected 2 ports
>>>> [ 0.603931] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00009480
>>>> [ 0.603984] usb usb8: New USB device found, idVendor=1d6b,
>>>> idProduct=0001, bcdDevice= 6.11
>>>> [ 0.603987] usb usb8: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 0.603989] usb usb8: Product: UHCI Host Controller
>>>> [ 0.603991] usb usb8: Manufacturer: Linux 6.11.0 uhci_hcd
>>>> [ 0.603992] usb usb8: SerialNumber: 0000:00:1d.2
>>>> [ 0.604175] hub 8-0:1.0: USB hub found
>>>> [ 0.604187] hub 8-0:1.0: 2 ports detected
>>>> [ 0.604507] i8042: PNP: No PS/2 controller found.
>>>> [ 0.604509] i8042: Probing ports directly.
>>>> [ 0.607314] serio: i8042 KBD port at 0x60,0x64 irq 1
>>>> [ 0.607322] serio: i8042 AUX port at 0x60,0x64 irq 12
>>>> [ 0.607576] mousedev: PS/2 mouse device common for all mice
>>>> [ 0.607851] rtc_cmos 00:01: RTC can wake from S4
>>>> [ 0.608175] rtc_cmos 00:01: registered as rtc0
>>>> [ 0.608206] rtc_cmos 00:01: setting system clock to 2024-09-16T20:18:41
>>>> UTC (1726517921)
>>>> [ 0.608248] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram,
>>>> hpet irqs
>>>> [ 0.608269] i2c_dev: i2c /dev entries driver
>>>> [ 0.609016] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled.
>>>> Duplicate IMA measurements will not be recorded in the IMA log.
>>>> [ 0.609054] device-mapper: uevent: version 1.0.3
>>>> [ 0.609150] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised:
>>>> dm-devel@...ts.linux.dev
>>>> [ 0.609178] platform eisa.0: Probing EISA bus 0
>>>> [ 0.609181] platform eisa.0: EISA: Cannot allocate resource for mainboard
>>>> [ 0.609183] platform eisa.0: Cannot allocate resource for EISA slot 1
>>>> [ 0.609185] platform eisa.0: Cannot allocate resource for EISA slot 2
>>>> [ 0.609186] platform eisa.0: Cannot allocate resource for EISA slot 3
>>>> [ 0.609188] platform eisa.0: Cannot allocate resource for EISA slot 4
>>>> [ 0.609189] platform eisa.0: Cannot allocate resource for EISA slot 5
>>>> [ 0.609191] platform eisa.0: Cannot allocate resource for EISA slot 6
>>>> [ 0.609192] platform eisa.0: Cannot allocate resource for EISA slot 7
>>>> [ 0.609194] platform eisa.0: Cannot allocate resource for EISA slot 8
>>>> [ 0.609195] platform eisa.0: EISA: Detected 0 cards
>>>> [ 0.609198] intel_pstate: CPU model not supported
>>>> [ 0.609512] ledtrig-cpu: registered to indicate activity on CPUs
>>>> [ 0.609564] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
>>>> [ 0.609566] vesafb: scrolling: redraw
>>>> [ 0.609567] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>>>> [ 0.609588] vesafb: framebuffer at 0xd0000000, mapped to
>>>> 0x(____ptrval____), using 8128k, total 8128k
>>>> [ 0.609716] fbcon: Deferring console take-over
>>>> [ 0.609720] fb0: VESA VGA frame buffer device
>>>> [ 0.609756] fujitsu_tablet: Unknown (using defaults)
>>>> [ 0.609870] drop_monitor: Initializing network drop monitor service
>>>> [ 0.610200] NET: Registered PF_INET6 protocol family
>>>> [ 0.809011] usb 2-5: new high-speed USB device number 2 using ehci-pci
>>>> [ 0.965402] usb 2-5: New USB device found, idVendor=0409, idProduct=005a,
>>>> bcdDevice= 1.00
>>>> [ 0.965410] usb 2-5: New USB device strings: Mfr=0, Product=0,
>>>> SerialNumber=0
>>>> [ 0.965833] hub 2-5:1.0: USB hub found
>>>> [ 0.966029] hub 2-5:1.0: 4 ports detected
>>>> [ 1.060999] usb 6-1: new full-speed USB device number 2 using uhci_hcd
>>>> [ 1.254086] usb 6-1: New USB device found, idVendor=1784, idProduct=0001,
>>>> bcdDevice= 0.00
>>>> [ 1.254094] usb 6-1: New USB device strings: Mfr=1, Product=2,
>>>> SerialNumber=3
>>>> [ 1.254096] usb 6-1: Product: eHome Infrared Transceiver
>>>> [ 1.254098] usb 6-1: Manufacturer: Topseed
>>>> [ 1.254100] usb 6-1: SerialNumber: TS000IUz
>>>> [ 1.256907] usb 2-5.1: new low-speed USB device number 3 using ehci-pci
>>>> [ 1.371648] usb 2-5.1: New USB device found, idVendor=046d,
>>>> idProduct=c317, bcdDevice= 0.70
>>>> [ 1.371656] usb 2-5.1: New USB device strings: Mfr=1, Product=2,
>>>> SerialNumber=0
>>>> [ 1.371658] usb 2-5.1: Product: USB Multimedia Keyboard
>>>> [ 1.371660] usb 2-5.1: Manufacturer: Logitech
>>>> [ 1.448914] usb 2-5.2: new high-speed USB device number 4 using ehci-pci
>>>> [ 1.525172] tsc: Refined TSC clocksource calibration: 2672.735 MHz
>>>> [ 1.525186] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
>>>> 0x2686a22b34e, max_idle_ns: 440795332917 ns
>>>> [ 1.525285] clocksource: Switched to clocksource tsc
>>>> [ 1.558738] usb 2-5.2: New USB device found, idVendor=1532,
>>>> idProduct=0e05, bcdDevice= 8.21
>>>> [ 1.558746] usb 2-5.2: New USB device strings: Mfr=1, Product=2,
>>>> SerialNumber=0
>>>> [ 1.558748] usb 2-5.2: Product: Razer Kiyo Pro
>>>> [ 1.558750] usb 2-5.2: Manufacturer: Razer Inc
>>>> [ 1.636911] usb 2-5.4: new high-speed USB device number 5 using ehci-pci
>>>> [ 1.757135] usb 2-5.4: New USB device found, idVendor=0bda,
>>>> idProduct=2838, bcdDevice= 1.00
>>>> [ 1.757143] usb 2-5.4: New USB device strings: Mfr=1, Product=2,
>>>> SerialNumber=3
>>>> [ 1.757145] usb 2-5.4: Product: RTL2838UHIDIR
>>>> [ 1.757147] usb 2-5.4: Manufacturer: Realtek
>>>> [ 1.757148] usb 2-5.4: SerialNumber: 00000001
>>>> [ 1.896915] usb 7-1: new low-speed USB device number 2 using uhci_hcd
>>>> [ 2.090985] usb 7-1: New USB device found, idVendor=1c4f, idProduct=0034,
>>>> bcdDevice= 1.10
>>>> [ 2.090993] usb 7-1: New USB device strings: Mfr=1, Product=2,
>>>> SerialNumber=0
>>>> [ 2.090995] usb 7-1: Product: Usb Mouse
>>>> [ 2.090997] usb 7-1: Manufacturer: SIGMACHIP
>>>> [ 2.520914] usb 3-4: new high-speed USB device number 4 using ehci-pci
>>>> [ 2.695073] usb 3-4: New USB device found, idVendor=0b05, idProduct=1784,
>>>> bcdDevice= 1.01
>>>> [ 2.695080] usb 3-4: New USB device strings: Mfr=1, Product=2,
>>>> SerialNumber=3
>>>> [ 2.695083] usb 3-4: Product: 802.11 n WLAN
>>>> [ 2.695085] usb 3-4: Manufacturer: Ralink
>>>> [ 2.695086] usb 3-4: SerialNumber: 1.0
>>>> [ 6.983494] Freeing initrd memory: 732708K
>>>> [ 6.993078] Segment Routing with IPv6
>>>> [ 6.993112] In-situ OAM (IOAM) with IPv6
>>>> [ 6.993166] NET: Registered PF_PACKET protocol family
>>>> [ 6.993452] Key type dns_resolver registered
>>>> [ 6.994849] microcode: Current revision: 0x00000012
>>>> [ 6.994854] microcode: Updated early from: 0x00000010
>>>> [ 6.995662] IPI shorthand broadcast: enabled
>>>> [ 6.998021] sched_clock: Marking stable (6996004567,
>>>> 824148)->(7068598070, -71769355)
>>>> [ 6.998330] registered taskstats version 1
>>>> [ 6.999038] Loading compiled-in X.509 certificates
>>>> [ 7.000201] Loaded X.509 cert 'Build time autogenerated kernel key:
>>>> 8b9c4d5ea71199831d97e735201ace9ff8457a95'
>>>> [ 7.003218] Demotion targets for Node 0: null
>>>> [ 7.003551] Key type .fscrypt registered
>>>> [ 7.003556] Key type fscrypt-provisioning registered
>>>> [ 7.015077] cryptd: max_cpu_qlen set to 1000
>>>> [ 7.055597] Key type encrypted registered
>>>> [ 7.055608] AppArmor: AppArmor sha256 policy hashing enabled
>>>> [ 7.055626] ima: No TPM chip found, activating TPM-bypass!
>>>> [ 7.055639] Loading compiled-in module X.509 certificates
>>>> [ 7.056587] Loaded X.509 cert 'Build time autogenerated kernel key:
>>>> 8b9c4d5ea71199831d97e735201ace9ff8457a95'
>>>> [ 7.056590] ima: Allocated hash algorithm: sha1
>>>> [ 7.056598] ima: No architecture policies found
>>>> [ 7.056614] evm: Initialising EVM extended attributes:
>>>> [ 7.056615] evm: security.selinux
>>>> [ 7.056616] evm: security.SMACK64
>>>> [ 7.056617] evm: security.SMACK64EXEC
>>>> [ 7.056618] evm: security.SMACK64TRANSMUTE
>>>> [ 7.056619] evm: security.SMACK64MMAP
>>>> [ 7.056620] evm: security.apparmor
>>>> [ 7.056621] evm: security.ima
>>>> [ 7.056622] evm: security.capability
>>>> [ 7.056623] evm: HMAC attrs: 0x1
>>>> [ 7.057049] PM: Magic number: 8:614:346
>>>> [ 7.057098] tty tty63: hash matches
>>>> [ 7.061477] RAS: Correctable Errors collector initialized.
>>>> [ 7.061561] clk: Disabling unused clocks
>>>> [ 7.061564] PM: genpd: Disabling unused power domains
>>>> [ 7.066690] Freeing unused decrypted memory: 2036K
>>>> [ 7.067974] Freeing unused kernel image (initmem) memory: 4860K
>>>> [ 7.068170] Write protecting the kernel read-only data: 28672k
>>>> [ 7.068986] Freeing unused kernel image (rodata/data gap) memory: 864K
>>>> [ 7.160616] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>>>> [ 7.160704] x86/mm: Checking user space page tables
>>>> [ 7.221245] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>>>> [ 7.221251] Run /init as init process
>>>> [ 7.221253] with arguments:
>>>> [ 7.221254] /init
>>>> [ 7.221255] splash
>>>> [ 7.221256] with environment:
>>>> [ 7.221257] HOME=/
>>>> [ 7.221258] TERM=linux
>>>> [ 7.221259] BOOT_IMAGE=/vmlinuz-6.11.0
>>>> [ 7.375505] ACPI Warning: SystemIO range
>>>> 0x0000000000000828-0x000000000000082F conflicts with OpRegion
>>>> 0x0000000000000800-0x000000000000084F (\PMRG) (20240322/utaddress-204)
>>>> [ 7.375517] ACPI: OSL: Resource conflict; ACPI support missing from
>>>> driver?
>>>> [ 7.375522] ACPI Warning: SystemIO range
>>>> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
>>>> 0x0000000000000500-0x000000000000053F (\GPS0) (20240322/utaddress-204)
>>>> [ 7.375529] ACPI: OSL: Resource conflict; ACPI support missing from
>>>> driver?
>>>> [ 7.375531] ACPI Warning: SystemIO range
>>>> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
>>>> 0x0000000000000500-0x000000000000053F (\GPS0) (20240322/utaddress-204)
>>>> [ 7.375537] ACPI: OSL: Resource conflict; ACPI support missing from
>>>> driver?
>>>> [ 7.375538] lpc_ich: Resource conflict(s) found affecting gpio_ich
>>>> [ 7.384601] sky2: driver version 1.30
>>>> [ 7.384756] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>>>> [ 7.385087] sky2 0000:08:00.0 eth0: addr 00:23:54:9e:5b:d0
>>>> [ 7.385184] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
>>>> [ 7.385497] sky2 0000:06:00.0 eth1: addr 00:23:54:9e:5b:cf
>>>> [ 7.390107] ahci 0000:00:1f.2: version 3.0
>>>> [ 7.391435] ACPI Warning: SystemIO range
>>>> 0x0000000000000400-0x000000000000041F conflicts with OpRegion
>>>> 0x0000000000000400-0x000000000000040F (\SMRG) (20240322/utaddress-204)
>>>> [ 7.391445] ACPI: OSL: Resource conflict; ACPI support missing from
>>>> driver?
>>>> [ 7.392355] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>>>> [ 7.392400] ahci 0000:00:1f.2: AHCI vers 0001.0200, 32 command slots, 3
>>>> Gbps, SATA mode
>>>> [ 7.392405] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
>>>> [ 7.392408] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp
>>>> pio slum part ccc ems sxs
>>>> [ 7.397468] hid: raw HID events driver (C) Jiri Kosina
>>>> [ 7.438438] sky2 0000:08:00.0 enp8s0: renamed from eth0
>>>> [ 7.438941] sky2 0000:06:00.0 enp6s0: renamed from eth1
>>>> [ 7.446100] usbcore: registered new interface driver usbhid
>>>> [ 7.446103] usbhid: USB HID core driver
>>>> [ 7.449704] scsi host0: ahci
>>>> [ 7.450043] scsi host1: ahci
>>>> [ 7.450177] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.7/usb2/2-5/2-5.1/2-5.1:1.0/0003:046D:C317.0001/input/input5
>>>> [ 7.450206] scsi host2: ahci
>>>> [ 7.450384] scsi host3: ahci
>>>> [ 7.450534] scsi host4: ahci
>>>> [ 7.450680] scsi host5: ahci
>>>> [ 7.450765] ata1: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc100
>>>> irq 29 lpm-pol 0
>>>> [ 7.450769] ata2: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc180
>>>> irq 29 lpm-pol 0
>>>> [ 7.450772] ata3: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc200
>>>> irq 29 lpm-pol 0
>>>> [ 7.450775] ata4: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc280
>>>> irq 29 lpm-pol 0
>>>> [ 7.450778] ata5: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc300
>>>> irq 29 lpm-pol 0
>>>> [ 7.450781] ata6: SATA max UDMA/133 abar m2048@...b5fc000 port 0xfb5fc380
>>>> irq 29 lpm-pol 0
>>>> [ 7.509365] hid-generic 0003:046D:C317.0001: input,hidraw0: USB HID v1.10
>>>> Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:1a.7-5.1/input0
>>>> [ 7.509615] input: Logitech USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:1a.7/usb2/2-5/2-5.1/2-5.1:1.1/0003:046D:C317.0002/input/input6
>>>> [ 7.512965] firewire_ohci 0000:0b:02.0: added OHCI v1.10 device as card
>>>> 0, 4 IR + 8 IT contexts, quirks 0x11
>>>> [ 7.525915] ACPI: bus type drm_connector registered
>>>> [ 7.569198] input: Logitech USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.7/usb2/2-5/2-5.1/2-5.1:1.1/0003:046D:C317.0002/input/input7
>>>> [ 7.569501] hid-generic 0003:046D:C317.0002: input,hidraw1: USB HID v1.10
>>>> Device [Logitech USB Multimedia Keyboard] on usb-0000:00:1a.7-5.1/input1
>>>> [ 7.569707] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:1C4F:0034.0003/input/input8
>>>> [ 7.570110] hid-generic 0003:1C4F:0034.0003: input,hidraw2: USB HID v1.10
>>>> Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.1-1/input0
>>>> [ 7.924893] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>> [ 7.925710] ata1.00: ATA-10: WD Blue SA510 2.5 2TB, 530309WD, max
>>>> UDMA/133
>>>> [ 7.925801] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32),
>>>> AA
>>>> [ 7.926415] ata1.00: Features: Dev-Sleep
>>>> [ 7.927326] ata1.00: configured for UDMA/133
>>>> [ 7.927586] scsi 0:0:0:0: Direct-Access ATA WD Blue SA510 2.
>>>> 09WD PQ: 0 ANSI: 5
>>>> [ 7.928008] scsi 0:0:0:0: Attached scsi generic sg0 type 0
>>>> [ 8.025099] firewire_core 0000:0b:02.0: created device fw0: GUID
>>>> 001e8c0001b0584a, S400
>>>> [ 8.404993] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>> [ 8.416099] ata2.00: ATA-8: Corsair Force 3 SSD, 1.3.2, max UDMA/133
>>>> [ 8.416606] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32),
>>>> AA
>>>> [ 8.426528] ata2.00: configured for UDMA/133
>>>> [ 8.426791] scsi 1:0:0:0: Direct-Access ATA Corsair Force 3
>>>> 2 PQ: 0 ANSI: 5
>>>> [ 8.427456] scsi 1:0:0:0: Attached scsi generic sg1 type 0
>>>> [ 8.904925] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>> [ 8.905740] ata3.00: ATA-10: WD Blue SA510 2.5 2TB, 530309WD, max
>>>> UDMA/133
>>>> [ 8.905838] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32),
>>>> AA
>>>> [ 8.906448] ata3.00: Features: Dev-Sleep
>>>> [ 8.907336] ata3.00: configured for UDMA/133
>>>> [ 8.907542] scsi 2:0:0:0: Direct-Access ATA WD Blue SA510 2.
>>>> 09WD PQ: 0 ANSI: 5
>>>> [ 8.908069] scsi 2:0:0:0: Attached scsi generic sg2 type 0
>>>> [ 9.392962] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>> [ 9.394169] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
>>>> [ 9.394176] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32)
>>>> [ 9.395560] ata4.00: configured for UDMA/133
>>>> [ 9.395767] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ:
>>>> 0 ANSI: 5
>>>> [ 9.396339] scsi 3:0:0:0: Attached scsi generic sg3 type 0
>>>> [ 9.876891] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>> [ 9.877133] ata5.00: ATA-10: KINGSTON SA400S37480G, SBFKK1B3, max
>>>> UDMA/133
>>>> [ 9.877216] ata5.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
>>>> [ 9.877559] ata5.00: configured for UDMA/133
>>>> [ 9.877838] scsi 4:0:0:0: Direct-Access ATA KINGSTON SA400S3
>>>> K1B3 PQ: 0 ANSI: 5
>>>> [ 9.878294] scsi 4:0:0:0: Attached scsi generic sg4 type 0
>>>> [ 10.352870] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>> [ 10.354014] ata6.00: ATAPI: DRW-24F1ST d, 2.00, max UDMA/133
>>>> [ 10.355420] ata6.00: configured for UDMA/133
>>>> [ 10.358873] scsi 5:0:0:0: CD-ROM ASUS DRW-24F1ST d 2.00
>>>> PQ: 0 ANSI: 5
>>>> [ 10.463913] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram
>>>> cd/rw xa/form2 cdda tray
>>>> [ 10.463919] cdrom: Uniform CD-ROM driver Revision: 3.20
>>>> [ 10.501960] sr 5:0:0:0: Attached scsi CD-ROM sr0
>>>> [ 10.502081] sr 5:0:0:0: Attached scsi generic sg5 type 5
>>>> [ 10.507297] scsi host6: pata_marvell
>>>> [ 10.507511] scsi host7: pata_marvell
>>>> [ 10.507593] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400
>>>> irq 16 lpm-pol 0
>>>> [ 10.507596] ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408
>>>> irq 16 lpm-pol 0
>>>> [ 10.514525] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00
>>>> TB/1.82 TiB)
>>>> [ 10.514542] sd 0:0:0:0: [sda] Write Protect is off
>>>> [ 10.514546] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>>> [ 10.514567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
>>>> doesn't support DPO or FUA
>>>> [ 10.514570] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120
>>>> GB/112 GiB)
>>>> [ 10.514587] sd 1:0:0:0: [sdb] Write Protect is off
>>>> [ 10.514591] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>>>> [ 10.514610] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>>>> [ 10.514610] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00
>>>> TB/1.82 TiB)
>>>> [ 10.514618] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
>>>> doesn't support DPO or FUA
>>>> [ 10.514622] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500
>>>> GB/466 GiB)
>>>> [ 10.514623] sd 2:0:0:0: [sdc] Write Protect is off
>>>> [ 10.514627] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>>>> [ 10.514639] sd 3:0:0:0: [sdd] Write Protect is off
>>>> [ 10.514643] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>>>> [ 10.514649] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
>>>> doesn't support DPO or FUA
>>>> [ 10.514650] sd 4:0:0:0: [sde] 937703088 512-byte logical blocks: (480
>>>> GB/447 GiB)
>>>> [ 10.514659] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
>>>> [ 10.514672] sd 4:0:0:0: [sde] Write Protect is off
>>>> [ 10.514673] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
>>>> doesn't support DPO or FUA
>>>> [ 10.514677] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>>>> [ 10.514690] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
>>>> [ 10.514706] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled,
>>>> doesn't support DPO or FUA
>>>> [ 10.514726] sd 3:0:0:0: [sdd] Preferred minimum I/O size 512 bytes
>>>> [ 10.514747] sd 4:0:0:0: [sde] Preferred minimum I/O size 512 bytes
>>>> [ 10.557486] sde: sde1
>>>> [ 10.557579] sd 4:0:0:0: [sde] Attached SCSI disk
>>>> [ 10.557928] sda: sda1
>>>> [ 10.557999] sd 0:0:0:0: [sda] Attached SCSI disk
>>>> [ 10.558245] sd 2:0:0:0: [sdc] Attached SCSI disk
>>>> [ 10.560449] sdb: sdb1 sdb2 sdb3
>>>> [ 10.560883] sd 1:0:0:0: [sdb] Attached SCSI disk
>>>> [ 10.602620] sdd: sdd1
>>>> [ 10.602860] sd 3:0:0:0: [sdd] Attached SCSI disk
>>>> [ 18.784958] random: crng init done
>>>> [ 24.072890] raid6: sse2x4 gen() 9257 MB/s
>>>> [ 24.140893] raid6: sse2x2 gen() 11781 MB/s
>>>> [ 24.208892] raid6: sse2x1 gen() 9633 MB/s
>>>> [ 24.208894] raid6: using algorithm sse2x2 gen() 11781 MB/s
>>>> [ 24.276889] raid6: .... xor() 7155 MB/s, rmw enabled
>>>> [ 24.276891] raid6: using ssse3x2 recovery algorithm
>>>> [ 24.279508] xor: measuring software checksum speed
>>>> [ 24.280148] prefetch64-sse : 15495 MB/sec
>>>> [ 24.280906] generic_sse : 13259 MB/sec
>>>> [ 24.280908] xor: using function: prefetch64-sse (15495 MB/sec)
>>>> [ 24.283562] async_tx: api initialized (async)
>>>> [ 24.888184] Btrfs loaded, zoned=yes, fsverity=yes
>>>> [ 25.121189] EXT4-fs (sde1): mounted filesystem
>>>> 94072726-5fed-439f-a496-8e6aaa88617e ro with ordered data mode. Quota mode:
>>>> none.
>>>> [ 25.650104] systemd[1]: Inserted module 'autofs4'
>>>> [ 25.720961] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode
>>>> (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS
>>>> +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD
>>>> +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ
>>>> +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
>>>> [ 25.721115] systemd[1]: Detected architecture x86-64.
>>>> [ 26.209831] systemd[1]: Configuration file
>>>> /run/systemd/system/netplan-ovs-cleanup.service is marked
>>>> world-inaccessible. This has no effect as configuration data is accessible
>>>> via APIs without restrictions. Proceeding anyway.
>>>> [ 26.282129] systemd[1]: Accepting user/group name '${GNUNET_USER}', which
>>>> does not match strict user/group name rules.
>>>> [ 26.341173] systemd[1]: Queued start job for default target Graphical
>>>> Interface.
>>>> [ 26.382658] systemd[1]: Created slice Slice /system/modprobe.
>>>> [ 26.383229] systemd[1]: Created slice Slice /system/systemd-fsck.
>>>> [ 26.383636] systemd[1]: Created slice User and Session Slice.
>>>> [ 26.383727] systemd[1]: Started Forward Password Requests to Wall
>>>> Directory Watch.
>>>> [ 26.383934] systemd[1]: Set up automount Arbitrary Executable File
>>>> Formats File System Automount Point.
>>>> [ 26.384053] systemd[1]: Reached target User and Group Name Lookups.
>>>> [ 26.384087] systemd[1]: Reached target Slice Units.
>>>> [ 26.384122] systemd[1]: Reached target Local Verity Protected Volumes.
>>>> [ 26.384233] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>>>> [ 26.384385] systemd[1]: Listening on LVM2 poll daemon socket.
>>>> [ 26.390357] systemd[1]: Listening on RPCbind Server Activation Socket.
>>>> [ 26.390560] systemd[1]: Listening on Syslog Socket.
>>>> [ 26.392228] systemd[1]: Listening on Process Core Dump Socket.
>>>> [ 26.392358] systemd[1]: Listening on fsck to fsckd communication Socket.
>>>> [ 26.392444] systemd[1]: Listening on initctl Compatibility Named Pipe.
>>>> [ 26.392728] systemd[1]: Listening on Journal Audit Socket.
>>>> [ 26.392878] systemd[1]: Listening on Journal Socket (/dev/log).
>>>> [ 26.393048] systemd[1]: Listening on Journal Socket.
>>>> [ 26.393622] systemd[1]: Listening on udev Control Socket.
>>>> [ 26.393770] systemd[1]: Listening on udev Kernel Socket.
>>>> [ 26.394928] systemd[1]: Mounting Huge Pages File System...
>>>> [ 26.396045] systemd[1]: Mounting POSIX Message Queue File System...
>>>> [ 26.397206] systemd[1]: Mounting Kernel Debug File System...
>>>> [ 26.398341] systemd[1]: Mounting Kernel Trace File System...
>>>> [ 26.400711] systemd[1]: Starting Journal Service...
>>>> [ 26.400852] systemd[1]: Condition check resulted in Kernel Module
>>>> supporting RPCSEC_GSS being skipped.
>>>> [ 26.400981] systemd[1]: Finished Availability of block devices.
>>>> [ 26.402714] systemd[1]: Starting Set the console keyboard layout...
>>>> [ 26.403977] systemd[1]: Starting Create List of Static Device Nodes...
>>>> [ 26.405164] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots
>>>> etc. using dmeventd or progress polling...
>>>> [ 26.406446] systemd[1]: Starting Load Kernel Module configfs...
>>>> [ 26.408022] systemd[1]: Starting Load Kernel Module drm...
>>>> [ 26.409876] systemd[1]: Starting Load Kernel Module efi_pstore...
>>>> [ 26.411397] systemd[1]: Starting Load Kernel Module fuse...
>>>> [ 26.411770] systemd[1]: Condition check resulted in File System Check on
>>>> Root Device being skipped.
>>>> [ 26.419152] systemd[1]: Starting Load Kernel Modules...
>>>> [ 26.420372] systemd[1]: Starting Remount Root and Kernel File Systems...
>>>> [ 26.421670] systemd[1]: Starting Coldplug All udev Devices...
>>>> [ 26.424102] systemd[1]: Mounted Huge Pages File System.
>>>> [ 26.424285] systemd[1]: Mounted POSIX Message Queue File System.
>>>> [ 26.424439] systemd[1]: Mounted Kernel Debug File System.
>>>> [ 26.424592] systemd[1]: Mounted Kernel Trace File System.
>>>> [ 26.425138] systemd[1]: Finished Create List of Static Device Nodes.
>>>> [ 26.425552] systemd[1]:modprobe@...figfs.service: Deactivated
>>>> successfully.
>>>> [ 26.425869] systemd[1]: Finished Load Kernel Module configfs.
>>>> [ 26.426221] systemd[1]:modprobe@....service: Deactivated successfully.
>>>> [ 26.426531] systemd[1]: Finished Load Kernel Module drm.
>>>> [ 26.426889] systemd[1]:modprobe@...e.service: Deactivated successfully.
>>>> [ 26.427195] systemd[1]: Finished Load Kernel Module fuse.
>>>> [ 26.428523] systemd[1]: Mounting FUSE Control File System...
>>>> [ 26.429778] systemd[1]: Mounting Kernel Configuration File System...
>>>> [ 26.431223] systemd[1]: Mounted FUSE Control File System.
>>>> [ 26.432057] systemd[1]: Mounted Kernel Configuration File System.
>>>> [ 26.448406] systemd[1]:modprobe@..._pstore.service: Deactivated
>>>> successfully.
>>>> [ 26.448945] systemd[1]: Finished Load Kernel Module efi_pstore.
>>>> [ 26.469212] EXT4-fs (sde1): re-mounted
>>>> 94072726-5fed-439f-a496-8e6aaa88617e r/w. Quota mode: none.
>>>> [ 26.471407] systemd[1]: Finished Remount Root and Kernel File Systems.
>>>> [ 26.471675] systemd[1]: Condition check resulted in Platform Persistent
>>>> Storage Archival being skipped.
>>>> [ 26.473420] systemd[1]: Starting Load/Save Random Seed...
>>>> [ 26.475161] systemd[1]: Starting Create System Users...
>>>> [ 26.483026] lp: driver loaded but no devices found
>>>> [ 26.493865] ppdev: user-space parallel port driver
>>>> [ 26.502393] systemd[1]: Finished Load/Save Random Seed.
>>>> [ 26.502655] systemd[1]: Condition check resulted in First Boot Complete
>>>> being skipped.
>>>> [ 26.506712] systemd[1]: Finished Set the console keyboard layout.
>>>> [ 26.508747] systemd[1]: Finished Create System Users.
>>>> [ 26.510321] systemd[1]: Starting Create Static Device Nodes in /dev...
>>>> [ 26.511046] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots
>>>> etc. using dmeventd or progress polling.
>>>> [ 26.528026] systemd[1]: Finished Load Kernel Modules.
>>>> [ 26.529531] systemd[1]: Starting Apply Kernel Variables...
>>>> [ 26.530139] systemd[1]: Finished Create Static Device Nodes in /dev.
>>>> [ 26.530349] systemd[1]: Reached target Preparation for Local File
>>>> Systems.
>>>> [ 26.532348] systemd[1]: Starting Rule-based Manager for Device Events and
>>>> Files...
>>>> [ 26.553864] systemd[1]: Started Journal Service.
>>>> [ 26.562848] systemd-journald[406]: Received client request to flush
>>>> runtime journal.
>>>> [ 26.919447] i5500_temp 0000:00:14.3: Sensor seems to be disabled
>>>> [ 26.941867] EDAC MC0: Giving out device to module i7core_edac.c
>>>> controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
>>>> [ 26.941914] EDAC PCI0: Giving out device to module i7core_edac controller
>>>> EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
>>>> [ 26.941936] EDAC i7core: Driver loaded, 1 memory controller(s) found.
>>>> [ 27.501967] mc: Linux media interface: v0.10
>>>> [ 27.821741] videodev: Linux video capture interface: v2.00
>>>> [ 27.829839] kvm_intel: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work
>>>> properly. Using workaround
>>>> [ 27.910536] snd_hda_intel 0000:04:00.1: Force to non-snoop mode
>>>> [ 27.927314] EXT4-fs (sdd1): mounted filesystem
>>>> 269c3cb0-82a8-484f-9f96-2569d52ced08 r/w with ordered data mode. Quota mode:
>>>> none.
>>>> [ 27.967879] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card1/input9
>>>> [ 27.967995] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card1/input10
>>>> [ 28.099282] EXT4-fs (sdb3): mounted filesystem
>>>> 965f3d65-ec1b-49a8-a27a-a6989cecf661 r/w with ordered data mode. Quota mode:
>>>> none.
>>>> [ 28.119031] EXT4-fs (sdc): mounted filesystem
>>>> 7f49ad40-e533-42c4-9977-7c4809d47b3d r/w with ordered data mode. Quota mode:
>>>> none.
>>>> [ 28.120177] EXT4-fs (sda1): mounted filesystem
>>>> a7d8e4b2-e2df-4976-b661-37e48f7411cf r/w with ordered data mode. Quota mode:
>>>> none.
>>>> [ 28.148845] Registered IR keymap rc-rc6-mce
>>>> [ 28.152056] Adding 15625212k swap on /dev/sdb2. Priority:-2 extents:1
>>>> across:15625212k SS
>>>> [ 28.169493] usb 2-5.2: Found UVC 1.00 device Razer Kiyo Pro (1532:0e05)
>>>> [ 28.174756] usbcore: registered new interface driver uvcvideo
>>>> [ 28.238001] IR RC6 protocol handler initialized
>>>> [ 28.301533] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 48000
>>>> [ 28.313037] rc rc0: Media Center Ed. eHome Infrared Remote Transceiver as
>>>> /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/rc/rc0
>>>> [ 28.313134] rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw
>>>> IR receiver, raw IR transmitter
>>>> [ 28.313280] input: Media Center Ed. eHome Infrared Remote Transceiver as
>>>> /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/rc/rc0/input11
>>>> [ 28.405085] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1989B:
>>>> line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
>>>> [ 28.405093] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0
>>>> (0x0/0x0/0x0/0x0/0x0)
>>>> [ 28.405095] snd_hda_codec_analog hdaudioC0D0: hp_outs=1
>>>> (0x11/0x0/0x0/0x0/0x0)
>>>> [ 28.405098] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
>>>> [ 28.405099] snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x1d
>>>> [ 28.405101] snd_hda_codec_analog hdaudioC0D0: inputs:
>>>> [ 28.405103] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x17
>>>> [ 28.405105] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x14
>>>> [ 28.405106] snd_hda_codec_analog hdaudioC0D0: Line=0x15
>>>> [ 28.405108] snd_hda_codec_analog hdaudioC0D0: CD=0x18
>>>> [ 28.420231] input: HDA Intel Rear Mic as
>>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>>>> [ 28.420363] input: HDA Intel Front Mic as
>>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>>>> [ 28.420495] input: HDA Intel Line as
>>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>>>> [ 28.420592] input: HDA Intel Line Out Front as
>>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>>>> [ 28.420710] input: HDA Intel Line Out Surround as
>>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
>>>> [ 28.420798] input: HDA Intel Line Out CLFE as
>>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
>>>> [ 28.420905] input: HDA Intel Line Out Side as
>>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
>>>> [ 28.421001] input: HDA Intel Front Headphone as
>>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
>>>> [ 28.540353] cfg80211: Loading compiled-in X.509 certificates for
>>>> regulatory database
>>>> [ 28.540722] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>>>> [ 28.541013] Loaded X.509 cert 'wens:
>>>> 61c038651aabdcf94bd0ac7ff06c7248db18c600'
>>>> [ 28.541974] mceusb 6-1:1.0: long-range (0x1) receiver active
>>>> [ 28.571526] cx23885: cx23885 driver version 0.0.4 loaded
>>>> [ 28.571754] cx23885: CORE cx23885[0]: subsystem: 0070:7801, board:
>>>> Hauppauge WinTV-HVR1800 [card=2,autodetected]
>>>> [ 28.605043] mceusb 6-1:1.0: Registered Topseed eHome Infrared Transceiver
>>>> with mce emulator interface version 1
>>>> [ 28.605052] mceusb 6-1:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1
>>>> active)
>>>> [ 28.605120] usbcore: registered new interface driver mceusb
>>>> [ 28.607375] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 24000
>>>> [ 28.613794] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 32000
>>>> [ 28.718690] usbcore: registered new interface driver snd-usb-audio
>>>> [ 29.013320] tveeprom: Hauppauge model 78521, rev C1E9, serial# 4029759297
>>>> [ 29.013327] tveeprom: MAC address is 00:0d:fe:31:3f:41
>>>> [ 29.013329] tveeprom: tuner model is Philips 18271_8295 (idx 149, type
>>>> 54)
>>>> [ 29.013331] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
>>>> [ 29.013333] tveeprom: audio processor is CX23887 (idx 42)
>>>> [ 29.013334] tveeprom: decoder processor is CX23887 (idx 37)
>>>> [ 29.013335] tveeprom: has radio
>>>> [ 29.013336] cx23885: cx23885[0]: hauppauge eeprom: model=78521
>>>> [ 29.101189] cx25840 2-0044: cx23887 A/V decoder found @ 0x88 (cx23885[0])
>>>> [ 29.560967] usb 3-4: reset high-speed USB device number 4 using ehci-pci
>>>> [ 29.731550] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev
>>>> 021c detected
>>>> [ 29.760952] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008
>>>> detected
>>>> [ 29.761293] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>>>> [ 29.761939] usbcore: registered new interface driver rt2800usb
>>>> [ 29.792083] rt2800usb 3-4:1.0 wlx20cf30a24130: renamed from wlan0
>>>> [ 29.793914] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware
>>>> (16382 bytes)
>>>> [ 29.931887] tuner: 1-0042: Tuner -1 found with type(s) Radio TV.
>>>> [ 29.977929] tda829x 1-0042: could not clearly identify tuner address,
>>>> defaulting to 60
>>>> [ 30.005283] tda18271 1-0060: creating new instance
>>>> [ 30.049326] tda18271: TDA18271HD/C1 detected @ 1-0060
>>>> [ 30.873273] tda829x 1-0042: type set to tda8295+18271
>>>> [ 32.228176] cx23885: cx23885[0]: registered device video2 [v4l2]
>>>> [ 32.228328] cx23885: cx23885[0]: registered device vbi0
>>>> [ 32.228612] cx23885: cx23885[0]: alsa: registered ALSA audio device
>>>> [ 32.228777] cx23885: cx23885[0]: registered device video3 [mpeg]
>>>> [ 32.228793] cx23885: Firmware and/or mailbox pointer not initialized or
>>>> corrupted, signature = 0xffffbfff, cmd = PING_FW
>>>> [ 32.228801] fbcon: Taking over console
>>>> [ 32.229089] Console: switching to colour frame buffer device 240x67
>>>> [ 32.230049] cx23885 0000:09:00.0: Direct firmware load for
>>>> v4l-cx23885-enc.fw failed with error -2
>>>> [ 32.230055] cx23885: ERROR: Hotplug firmware request failed
>>>> (v4l-cx23885-enc.fw).
>>>> [ 32.230056] cx23885: Please fix your hotplug setup, the board will not
>>>> work without firmware loaded!
>>>> [ 32.230057] cx23885: cx23885_initialize_codec() f/w load failed
>>>> [ 32.230059] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
>>>> [ 32.230061] cx23885: cx23885[0]: cx23885 based dvb card
>>>> [ 32.398080] MT2131: successfully identified at address 0x61
>>>> [ 32.399714] dvbdev: DVB: registering new adapter (cx23885[0])
>>>> [ 32.399718] cx23885 0000:09:00.0: DVB: registering adapter 0 frontend 0
>>>> (Samsung S5H1409 QAM/8VSB Frontend)...
>>>> [ 32.400463] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb1
>>>> [ 32.400467] cx23885: cx23885[0]/0: found at 0000:09:00.0, rev: 15, irq:
>>>> 17, latency: 0, mmio: 0xfbc00000
>>>> [ 43.045128] audit: type=1400 audit(1726517963.933:2): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start"
>>>> pid=1473 comm="apparmor_parser"
>>>> [ 43.047845] audit: type=1400 audit(1726517963.933:3): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="nvidia_modprobe"
>>>> pid=1470 comm="apparmor_parser"
>>>> [ 43.047854] audit: type=1400 audit(1726517963.933:4): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
>>>> pid=1470 comm="apparmor_parser"
>>>> [ 43.047859] audit: type=1400 audit(1726517963.933:5): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="lsb_release" pid=1468
>>>> comm="apparmor_parser"
>>>> [ 43.048576] audit: type=1400 audit(1726517963.933:6): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1474
>>>> comm="apparmor_parser"
>>>> [ 43.048583] audit: type=1400 audit(1726517963.933:7): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="man_filter" pid=1474
>>>> comm="apparmor_parser"
>>>> [ 43.048587] audit: type=1400 audit(1726517963.933:8): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="man_groff" pid=1474
>>>> comm="apparmor_parser"
>>>> [ 43.053897] audit: type=1400 audit(1726517963.941:9): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="/usr/bin/redshift"
>>>> pid=1476 comm="apparmor_parser"
>>>> [ 43.054106] audit: type=1400 audit(1726517963.941:10): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="libreoffice-oosplash"
>>>> pid=1478 comm="apparmor_parser"
>>>> [ 43.054837] audit: type=1400 audit(1726517963.941:11): apparmor="STATUS"
>>>> operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
>>>> pid=1479 comm="apparmor_parser"
>>>> [ 43.276873] RPC: Registered named UNIX socket transport module.
>>>> [ 43.276877] RPC: Registered udp transport module.
>>>> [ 43.276879] RPC: Registered tcp transport module.
>>>> [ 43.276879] RPC: Registered tcp-with-tls transport module.
>>>> [ 43.276880] RPC: Registered tcp NFSv4.1 backchannel transport module.
>>>> [ 43.770189] sky2 0000:06:00.0 enp6s0: enabling interface
>>>> [ 43.781961] sky2 0000:08:00.0 enp8s0: enabling interface
>>>> [ 43.787810] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading
>>>> firmware file 'rt2870.bin'
>>>> [ 43.793640] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware
>>>> detected - version: 0.36
>>>> [ 45.854962] wlx20cf30a24130: authenticate with fc:2b:b2:a7:af:02 (local
>>>> address=20:cf:30:a2:41:30)
>>>> [ 45.854969] wlx20cf30a24130: send auth to fc:2b:b2:a7:af:02 (try 1/3)
>>>> [ 45.867365] wlx20cf30a24130: authenticated
>>>> [ 45.868985] wlx20cf30a24130: associate with fc:2b:b2:a7:af:02 (try 1/3)
>>>> [ 45.877038] wlx20cf30a24130: RX AssocResp from fc:2b:b2:a7:af:02
>>>> (capab=0x1411 status=0 aid=3)
>>>> [ 45.887555] wlx20cf30a24130: associated
>>>> [ 46.441910] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 48000
>>>> [ 46.558022] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 48000
>>>> [ 46.677063] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 48000
>>>> [ 46.695942] sky2 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full
>>>> duplex, flow control both
>>>> [ 47.319604] wlx20cf30a24130: Limiting TX power to 30 (30 - 0) dBm as
>>>> advertised by fc:2b:b2:a7:af:02
>>>> [ 59.697229] kauditd_printk_skb: 25 callbacks suppressed
>>>> [ 59.697233] audit: type=1400 audit(1726517980.585:37): apparmor="DENIED"
>>>> operation="open" class="file" profile="/usr/sbin/cups-browsed"
>>>> name="/usr/local/lib/libz.so.1.3" pid=2031 comm="cups-browsed"
>>>> requested_mask="r" denied_mask="r" fsuid=0 ouid=0
>>>> [ 59.699869] audit: type=1400 audit(1726517980.585:38): apparmor="DENIED"
>>>> operation="open" class="file" profile="/usr/sbin/cups-browsed"
>>>> name="/usr/local/lib/libpng16.so.16.44.0" pid=2031 comm="cups-browsed"
>>>> requested_mask="r" denied_mask="r" fsuid=0 ouid=0
>>>> [ 59.810741] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 48000
>>>> [ 59.921457] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 48000
>>>> [ 60.036414] usb 2-5.2: current rate 16000 is different from the runtime
>>>> rate 48000
>>>> [ 63.727107] warning: `kdeconnectd' uses wireless extensions which will
>>>> stop working for Wi-Fi 7 hardware; use nl80211
>>>>
>>>> On 2024-09-16 11:20, Dr. David Alan Gilbert wrote:
>>>>> * Bob Gill (gillb5@...us.net) wrote:
>>>>>> OK.
>>>>> Thanks! I'm not seeing anything too obvious, however...
>>>>>
>>>>>> 6.10.0.dmesg.txt:
>>>>>>
>>>>>> [ 0.000000] Linux version 6.10.0 (root@...edom) (gcc (Ubuntu
>>>>>> 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP
>>>>>> PREEMPT_DYNAMIC Sun Jul 14 18:50:17 MDT 2024
>>>>>> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.10.0
>>>>>> root=UUID=94072726-5fed-439f-a496-8e6aaa88617e ro quiet splash
>>>>> .....
>>>>>
>>>>>
>>>>>> 6.11.0.dmesg.txt
>>>>>>
>>>>>> [ 0.000000] Linux version 6.11.0 (root@...edom) (gcc (Ubuntu
>>>>>> 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP
>>>>>> PREEMPT_DYNAMIC Sun Sep 15 13:10:55 MDT 2024
>>>>>> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.11.0
>>>>>> root=UUID=94072726-5fed-439f-a496-8e6aaa88617e ro recovery nomodeset
>>>>>> dis_ucode_ldr
>>>>>> [ 0.000000] KERNEL supported cpus:
>>>>> Would it be possible to get a 6.11.0 dmesg without the 'nomodeset' ?
>>>>> I realise that's trickier, but it's really where things start to get interesting.
>>>>>
>>>>> On the 6.10 dmesg we have the normal fun:
>>>>>
>>>>>> [ 15.759932] [drm] amdgpu kernel modesetting enabled.
>>>>>> [ 15.760169] amdgpu: Virtual CRAT table created for CPU
>>>>>> [ 15.760203] amdgpu: Topology: Add CPU node
>>>>>> [ 15.760502] [drm] initializing kernel modesetting (BEIGE_GOBY
>>>>>> 0x1002:0x743F 0x148C:0x2415 0xC1).
>>>>>> [ 15.760519] [drm] register mmio base: 0xFB700000
>>>>>> [ 15.760520] [drm] register mmio size: 1048576
>>>>>> [ 15.764353] [drm] add ip block number 0 <nv_common>
>>>>>> [ 15.764355] [drm] add ip block number 1 <gmc_v10_0>
>>>>>> [ 15.764357] [drm] add ip block number 2 <navi10_ih>
>>>>>> [ 15.764359] [drm] add ip block number 3 <psp>
>>>>>> [ 15.764360] [drm] add ip block number 4 <smu>
>>>>>> [ 15.764361] [drm] add ip block number 5 <dm>
>>>>>> [ 15.764363] [drm] add ip block number 6 <gfx_v10_0>
>>>>>> [ 15.764364] [drm] add ip block number 7 <sdma_v5_2>
>>>>>> [ 15.764366] [drm] add ip block number 8 <vcn_v3_0>
>>>>>> [ 15.764379] resource: resource sanity check: requesting [mem
>>>>>> 0x00000000000c0000-0x00000000000dffff], which spans more than PCI Bus
>>>>>> 0000:00 [mem 0x000d0000-0x000dffff window]
>>>>>> [ 15.764383] caller pci_map_rom+0x83/0x220 mapping multiple BARs
>>>>>> [ 15.764391] amdgpu 0000:04:00.0: No more image in the PCI ROM
>>>>>> [ 15.764412] amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from ROM BAR
>>>>>> [ 15.764414] amdgpu: ATOM BIOS: 113-001-XT7
>>>>>> [ 15.777550] [drm] VCN(0) decode is enabled in VM mode
>>>>>> [ 15.781178] amdgpu 0000:04:00.0: vgaarb: deactivate vga console
>>>>>> [ 15.781185] amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ)
>>>>>> feature disabled as experimental (default)
>>>>>> [ 15.781194] amdgpu 0000:04:00.0: amdgpu: PCIE atomic ops is not supported
>>>>>> [ 15.781245] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit,
>>>>>> fragment size is 9-bit
>>>>>> [ 15.781261] amdgpu 0000:04:00.0: amdgpu: VRAM: 4080M 0x0000008000000000 -
>>>>>> 0x00000080FEFFFFFF (4080M used)
>>>>>> [ 15.781264] amdgpu 0000:04:00.0: amdgpu: GART: 512M 0x0000000000000000 -
>>>>>> 0x000000001FFFFFFF
>>>>>> [ 15.781277] [drm] Detected VRAM RAM=4080M, BAR=256M
>>>>>> [ 15.781279] [drm] RAM width 64bits GDDR6
>>>>>> [ 15.783108] [drm] amdgpu: 4080M of VRAM memory ready
>>>>>> [ 15.783112] [drm] amdgpu: 5979M of GTT memory ready.
>>>>>> [ 15.783133] [drm] GART: num cpu pages 131072, num gpu pages 131072
>>>>>> [ 15.783255] [drm] PCIE GART of 512M enabled (table at
>>>>>> 0x0000008000800000).
>>>>>> [ 18.564918] random: crng init done
>>>>>> [ 19.594908] amdgpu 0000:04:00.0: amdgpu: STB initialized to 2048 entries
>>>>>> [ 19.595220] [drm] Loading DMUB firmware via PSP: version=0x02020020
>>>>>> [ 19.595937] [drm] use_doorbell being set to: [true]
>>>>>> [ 19.595955] [drm] Found VCN firmware Version ENC: 1.31 DEC: 3 VEP: 0
>>>>>> Revision: 2
>>>>>> [ 19.595965] amdgpu 0000:04:00.0: amdgpu: Will use PSP to load VCN
>>>>>> firmware
>>>>>> [ 19.663643] amdgpu 0000:04:00.0: amdgpu: reserve 0xa00000 from
>>>>>> 0x80fd000000 for PSP TMR
>>>>>> [ 19.765435] amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is
>>>>>> not available
>>>>>> [ 19.781512] amdgpu 0000:04:00.0: amdgpu: SECUREDISPLAY: securedisplay ta
>>>>>> ucode is not available
>>>>>> [ 19.781538] amdgpu 0000:04:00.0: amdgpu: smu driver if version =
>>>>>> 0x0000000d, smu fw if version = 0x00000010, smu fw program = 0, version =
>>>>>> 0x00492400 (73.36.0)
>>>>>> [ 19.781544] amdgpu 0000:04:00.0: amdgpu: SMU driver if version not
>>>>>> matched
>>>>>> [ 19.781581] amdgpu 0000:04:00.0: amdgpu: use vbios provided pptable
>>>>>> [ 19.828182] amdgpu 0000:04:00.0: amdgpu: SMU is initialized successfully!
>>>>>> [ 19.828795] [drm] Display Core v3.2.281 initialized on DCN 3.0.3
>>>>>> [ 19.828798] [drm] DP-HDMI FRL PCON supported
>>>>>> [ 19.829988] [drm] DMUB hardware initialized: version=0x02020020
>>>>>> [ 19.914675] [drm] kiq ring mec 2 pipe 1 q 0
>>>>>> [ 19.956011] amdgpu: HMM registered 4080MB device memory
>>>>>> [ 19.963868] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
>>>>>> [ 19.963883] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
>>>>>> [ 19.964255] amdgpu: Virtual CRAT table created for GPU
>>>>>> [ 19.964896] amdgpu: Topology: Add dGPU node [0x743f:0x1002]
>>>>>> [ 19.964900] kfd kfd: amdgpu: added device 1002:743f
>>>>>> [ 19.964919] amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 8,
>>>>>> active_cu_number 16
>>>>>> [ 19.964924] amdgpu 0000:04:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0
>>>>>> on hub 0
>>>>>> [ 19.964926] amdgpu 0000:04:00.0: amdgpu: ring gfx_0.1.0 uses VM inv eng 1
>>>>>> on hub 0
>>>>>> [ 19.964927] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng
>>>>>> 4 on hub 0
>>>>>> [ 19.964929] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng
>>>>>> 5 on hub 0
>>>>>> [ 19.964931] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng
>>>>>> 6 on hub 0
>>>>>> [ 19.964933] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng
>>>>>> 7 on hub 0
>>>>>> [ 19.964935] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng
>>>>>> 8 on hub 0
>>>>>> [ 19.964936] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng
>>>>>> 9 on hub 0
>>>>>> [ 19.964938] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng
>>>>>> 10 on hub 0
>>>>>> [ 19.964940] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng
>>>>>> 11 on hub 0
>>>>>> [ 19.964941] amdgpu 0000:04:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng
>>>>>> 12 on hub 0
>>>>>> [ 19.964943] amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 13 on
>>>>>> hub 0
>>>>>> [ 19.964945] amdgpu 0000:04:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0
>>>>>> on hub 8
>>>>>> [ 19.966250] amdgpu 0000:04:00.0: amdgpu: Using BACO for runtime pm
>>>>>> [ 19.966781] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:04:00.0 on
>>>>>> minor 0
>>>>>> [ 19.975362] fbcon: amdgpudrmfb (fb0) is primary device
>>>>>> [ 19.975369] fbcon: Deferring console take-over
>>>>>> [ 19.975373] amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer
>>>>>> device
>>>>> So lets see what that looks like on a 6.11.0 without the nomodeset.
>>>>>
>>>>> Dave
Powered by blists - more mailing lists