linux-kernel - Re: [PATCH v4 08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ylxrbde4kafbos3qmx54w2d6hpv26ngxgkkpnbdynjj2wfce32@fyzr4jxzn6z4>
Date: Mon, 16 Sep 2024 16:23:04 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Ivaylo Ivanov <ivo.ivanov.ivanov1@...il.com>
Cc: Krzysztof Kozlowski <krzk+dt@...nel.org>, 
	Conor Dooley <conor+dt@...nel.org>, Alim Akhtar <alim.akhtar@...sung.com>, 
	Sylwester Nawrocki <s.nawrocki@...sung.com>, Linus Walleij <linus.walleij@...aro.org>, 
	Rob Herring <robh+dt@...nel.org>, linux-samsung-soc@...r.kernel.org, 
	linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org, linux-gpio@...r.kernel.org, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 08/10] arm64: dts: exynos: Add initial support for
 exynos8895 SoC

On Mon, Sep 09, 2024 at 02:00:15PM +0300, Ivaylo Ivanov wrote:

> +&pinctrl_peric0 {
> +	gpd0: gpd0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd1: gpd1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd2: gpd2-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd3: gpd3-gpio-bank {

These should be ordered by node name. Same in peric1.

> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb1: gpb1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpe7: gpe7-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpf1: gpf1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};


> diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
> new file mode 100644
> index 000000000..59af33420
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
> @@ -0,0 +1,249 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/*
> + * Samsung's Exynos 8895 SoC device tree source
> + *
> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@...il.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "samsung,exynos8895";
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		pinctrl0 = &pinctrl_alive;
> +		pinctrl1 = &pinctrl_abox;
> +		pinctrl2 = &pinctrl_vts;
> +		pinctrl3 = &pinctrl_fsys0;
> +		pinctrl4 = &pinctrl_fsys1;
> +		pinctrl5 = &pinctrl_busc;
> +		pinctrl6 = &pinctrl_peric0;
> +		pinctrl7 = &pinctrl_peric1;
> +	};
> +
> +	arm-a53-pmu {
> +		compatible = "arm,cortex-a53-pmu";
> +		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpu0>,
> +				     <&cpu1>,
> +				     <&cpu2>,
> +				     <&cpu3>;
> +	};
> +
> +	/* There's no PMU model for the Mongoose cores */
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&cpu4>;
> +				};
> +				core1 {
> +					cpu = <&cpu5>;
> +				};
> +				core2 {
> +					cpu = <&cpu6>;
> +				};
> +				core3 {
> +					cpu = <&cpu7>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x100>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu@101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x101>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu2: cpu@102 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x102>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu3: cpu@103 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x103>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu4: cpu@0 {

Why cpu@0 is cpu4 not cpu0? Anyway, these should be ordered by unit
address.

> +
> +	oscclk: osc-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-output-names = "oscclk";
> +	};
> +
> +	psci {
> +		compatible = "arm,psci";
> +		method = "smc";
> +		cpu_suspend = <0xc4000001>;
> +		cpu_off = <0x84000002>;
> +		cpu_on = <0xc4000003>;
> +	};
> +
> +	timer {

Keep order by names, timer goes after soc.

> +		compatible = "arm,armv8-timer";
> +		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> +		/*
> +		 * Non-updatable, broken stock Samsung bootloader does not
> +		 * configure CNTFRQ_EL0
> +		 */
> +		clock-frequency = <26000000>;
> +	};
> +
> +	soc: soc@0 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0x0 0x20000000>;

ranges is the second property (see DTS coding style).

> +
> +		chipid@...00000 {
> +			compatible = "samsung,exynos8895-chipid",
> +				     "samsung,exynos850-chipid";
> +			reg = <0x10000000 0x24>;
> +		};
> +
> +		gic: interrupt-controller@...01000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x10201000 0x1000>,

reg is second, please follow DTS coding style for new submissions.

> +			      <0x10202000 0x1000>,
> +			      <0x10204000 0x2000>,
> +			      <0x10206000 0x2000>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
> +						 IRQ_TYPE_LEVEL_HIGH)>;
> +		};

Best regards,
Krzysztof