[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240924102433.3ff11d20@fedora.home>
Date: Tue, 24 Sep 2024 10:24:33 +0200
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: Abhishek Chauhan <quic_abchauha@...cinc.com>
Cc: "David S. Miller" <davem@...emloft.net>, Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
<pabeni@...hat.com>, netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Andrew Halaney <ahalaney@...hat.com>, "Russell King (Oracle)"
<linux@...linux.org.uk>, Andrew Lunn <andrew@...n.ch>, Heiner Kallweit
<hkallweit1@...il.com>, Bartosz Golaszewski
<bartosz.golaszewski@...aro.org>, "linux-tegra@...r.kernel.org"
<linux-tegra@...r.kernel.org>, Brad Griffis <bgriffis@...dia.com>, Vladimir
Oltean <vladimir.oltean@....com>, Jon Hunter <jonathanh@...dia.com>,
kernel@...cinc.com
Subject: Re: [PATCH net v2] net: phy: aquantia: Introduce custom
get_features
Hi,
On Mon, 23 Sep 2024 22:52:51 -0700
Abhishek Chauhan <quic_abchauha@...cinc.com> wrote:
> Remove the use of phy_set_max_speed in phy driver as the
> function is mainly used in MAC driver to set the max
> speed.
>
> Introduce custom get_features for AQR family of chipsets
>
> 1. such as AQR111/B0/114c which supports speeds up to 5Gbps
> 2. such as AQR115c/AQCS109 which supports speeds up to 2.5Gbps
>
> Fixes: 038ba1dc4e54 ("net: phy: aquantia: add AQR111 and AQR111B0 PHY ID")
> Fixes: 0974f1f03b07 ("net: phy: aquantia: remove false 5G and 10G speed ability for AQCS109")
> Fixes: c278ec644377 ("net: phy: aquantia: add support for AQR114C PHY ID")
> Fixes: 0ebc581f8a4b ("net: phy: aquantia: add support for aqr115c")
> Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/
> Signed-off-by: Abhishek Chauhan <quic_abchauha@...cinc.com>
> ---
> Changes since v1
> 1. remove usage of phy_set_max_speed in the aquantia driver code.
> 2. Introduce aqr_custom_get_feature which checks for the phy id and
> takes necessary actions based on max_speed supported by the phy
> 3. remove aqr111_config_init as it is just a wrapper function.
>
> output from my device looks like :-
> 1. Link is up with 2.5Gbps with 2500BaseX with autoneg on.
>
>
> Settings for eth0:
> Supported ports: [ TP FIBRE ]
> Supported link modes: 10baseT/Full
> 100baseT/Full
> 1000baseT/Full
> 2500baseX/Full
> 2500baseT/Full
> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: Yes
> Supported FEC modes: Not reported
> Advertised link modes: 10baseT/Full
> 100baseT/Full
> 1000baseT/Full
> 2500baseX/Full
> 2500baseT/Full
>
[...]
> +static void aqr_supported_speed(struct phy_device *phydev, u32 max_speed)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
> +
> + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
Can this PHY actually support FIBRE ports ? What you must list here are
the modes that the PHY can support on the LP side. I'm not familiar
with this PHY, but from what I can see from the current driver, there's
no such support yet in the driver.
> + linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, supported);
> +
> + if (max_speed == SPEED_2500) {
> + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, supported);
If the PHY is strictly BaseT, then you shouldn't specify 2500BaseX as
supported
> + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, supported);
> + } else if (max_speed == SPEED_5000) {
> + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, supported);
Same here
> + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, supported);
> + }
> +
> + linkmode_copy(phydev->supported, supported);
> +}
> +
> +static int aqr_custom_get_feature(struct phy_device *phydev)
> +{
> + switch (phydev->drv->phy_id) {
> + case PHY_ID_AQR115C:
> + case PHY_ID_AQCS109:
> + aqr_supported_speed(phydev, SPEED_2500);
> + break;
> + case PHY_ID_AQR111:
> + case PHY_ID_AQR111B0:
> + case PHY_ID_AQR114C:
> + aqr_supported_speed(phydev, SPEED_5000);
> + break;
> + }
> + return 0;
> +}
You could define one .get_feature for the 2.5G PHYs and another for the
5G phys, that would avoid having to modify this single helper for each
new PHY.
Thanks,
Maxime
Powered by blists - more mailing lists