lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ac9c2b3d-f035-4ca2-c737-6ed72d54b150@quicinc.com>
Date: Tue, 24 Sep 2024 14:43:04 +0530
From: Dikshita Agarwal <quic_dikshita@...cinc.com>
To: <neil.armstrong@...aro.org>, Vikash Garodia <quic_vgarodia@...cinc.com>,
        Abhinav Kumar <quic_abhinavk@...cinc.com>,
        Mauro Carvalho Chehab
	<mchehab@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski
	<krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Philipp Zabel
	<p.zabel@...gutronix.de>
CC: <linux-media@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Vedang Nagar
	<quic_vnagar@...cinc.com>
Subject: Re: [PATCH v3 00/29] Qualcomm iris video decoder driver

Hi Neil,

On 8/27/2024 7:11 PM, neil.armstrong@...aro.org wrote:
> Hi,
> 
> On 27/08/2024 12:05, Dikshita Agarwal via B4 Relay wrote:
>> Introduce support for Qualcomm new video acceleration hardware i.e. IRIS,
>> used
>> for video stream decoding.
>>
>> Iris is a multi pipe based hardware that offloads video stream decoding
>> from the
>> application processor (AP). It supports H.264 decoding.  The AP communicates
>> with hardware through a well defined protocol, called as host firmware
>> interface
>> (HFI), which provides fine-grained and asynchronous control over individual
>> hardware features.
>>
>> This driver implements upgraded HFI gen2 to communicate with firmware. It
>> supports SM8550 which is based out of HFI gen 2. It also supports SM8250
>> which
>> is based out of HFI gen1.
>>
>> This driver comes with below capabilities:
>> - V4L2 complaint video driver with M2M and STREAMING capability.
>> - Supports H264 decoder.
>>
>> This driver comes with below features:
>> - Centralized resource management.
>> - Centralized management of core and instance states.
>> - Defines platform specific capabilities and features. As a results, it
>> provides
>>    a single point of control to enable/disable a given feature depending on
>>    specific platform capabilities.
>> - Handles various video recommended sequences, like DRC, Drain, Seek, EOS.
>> - Implements asynchronous communication with hardware to achieve better
>>    experience in low latency usecases.
>> - Output and capture planes are controlled independently. Thereby
>> providing a
>>    way to reconfigure individual plane.
>> - Native hardware support of LAST flag which is mandatory to align with port
>>    reconfiguration and DRAIN sequence as per V4L guidelines.
>>
>> Changes since v2:
>> - introduced support for HFI gen1.
>> - deprecated Encoder and HEVC, VP9 codecs.
>> - removed custom vb2 mem ops and used standard framework instead.
>> - added support for mmap streaming mode.
>> - migrated all the buffer APIs to mem2mem helper functions.
>> - registered iris buffer with vb2 framework.
>> - migrated to clk_bulk, reset_bulk and icc_bulk APIs.
>> - used pm_domain_attach/detach_list APIs.
>> - migrated to read/writel and other available helpers for register access
>>    instead of custom wrappers.
>> - added documentation for various structures.
>> - addressed many other review comments from v2.
>>
>> This series depends on [1] & [2]:
>>
>> [1]: https://patchwork.linuxtv.org/project/linux-media/list/?series=13341 -
>> already applied in next-20240821
>> [2]: https://patchwork.kernel.org/project/linux-clk/patch
>> /20240812134752.28031-1-quic_vnagar@...cinc.com/
>>
>> Note: A harmless onetime error log "Lucid PLL latch failed. Output may
>> be unstable!" is seen during bootup. It doesn't impact any video usecase
>> and is currently under discussion.
>>
>> Static tools like checkpatch, smatch, dt_binding_check, sparse and
>> Coccinelle
>> run successfully with this driver.
>>
>> The result of v4l2-compliance test on SM8550:
>>
>> v4l2-compliance 1.29.0-5239, 64 bits, 64-bit time_t
>> v4l2-compliance SHA: a1ebb4dad512 2024-08-08 20:00:17
>>
>> Compliance test for iris_driver device /dev/video0:
>>
>> Driver Info:
>>          Driver name      : iris_driver
>>          Card type        : iris_decoder
>>          Bus info         : platform:iris_icc
>>          Driver version   : 6.11.0
>>          Capabilities     : 0x84204000
>>                  Video Memory-to-Memory Multiplanar
>>                  Streaming
>>                  Extended Pix Format
>>                  Device Capabilities
>>          Device Caps      : 0x04204000
>>                  Video Memory-to-Memory Multiplanar
>>                  Streaming
>>                  Extended Pix Format
>>          Detected Stateful Decoder
>>
>> Required ioctls:
>>          test VIDIOC_QUERYCAP: OK
>>          test invalid ioctls: OK
>>
>> Allow for multiple opens:
>>          test second /dev/video0 open: OK
>>          test VIDIOC_QUERYCAP: OK
>>          test VIDIOC_G/S_PRIORITY: OK
>>                  fail: ../utils/v4l2-compliance/v4l2-compliance.cpp(763):
>> !ok
>>          test for unlimited opens: FAIL
> 
> You are supossed to fix those 2 failures to be compliant.
> 
Sure, we will fix this in next version.
>>
>> Debug ioctls:
>>          test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>          test VIDIOC_LOG_STATUS: OK (Not Supported)
>>
>> Input ioctls:
>>          test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>          test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>          test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>          test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>          test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>          test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>          Inputs: 0 Audio Inputs: 0 Tuners: 0
>>
>> Output ioctls:
>>          test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>          test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>          test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>          test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>          test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>          Outputs: 0 Audio Outputs: 0 Modulators: 0
>>
>> Input/Output configuration ioctls:
>>          test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>          test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>          test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>          test VIDIOC_G/S_EDID: OK (Not Supported)
>>
>> Control ioctls:
>>          test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>          test VIDIOC_QUERYCTRL: OK
>>          test VIDIOC_G/S_CTRL: OK
>>          test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>          test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>          test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>          Standard Controls: 3 Private Controls: 0
>>
>> Format ioctls:
>>          test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>          test VIDIOC_G/S_PARM: OK (Not Supported)
>>          test VIDIOC_G_FBUF: OK (Not Supported)
>>          test VIDIOC_G_FMT: OK
>>          test VIDIOC_TRY_FMT: OK
>>          test VIDIOC_S_FMT: OK
>>          test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>          test Cropping: OK
>>          test Composing: OK
>>          test Scaling: OK (Not Supported)
>>
>> Codec ioctls:
>>          test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>          test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>          test VIDIOC_(TRY_)DECODER_CMD: OK
>>
>> Buffer ioctls:
>>          test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>          test CREATE_BUFS maximum buffers: OK
>>          test VIDIOC_REMOVE_BUFS: OK
>>          test VIDIOC_EXPBUF: OK (Not Supported)
>>          test Requests: OK (Not Supported)
> 
> I've been trying to test the driver on QRD8550, and I tried to
> decode a stream with v4l2-ctl and v4l2-compliance using --stream-from-hdr
> and it completely fails:
> 
> # v4l2-ctl --verbose --set-fmt-video-out=pixelformat=H264
> --set-fmt-video=pixelformat=NV12
> --stream-from-hdr=/Big_Buck_Bunny_1080_10s_5MB.264.hdr --stream-count=25
> --stream-mmap --stream-to=out.nv12
> VIDIOC_QUERYCAP: ok
> VIDIOC_G_FMT: ok
> VIDIOC_S_FMT: ok
> Format Video Capture Multiplanar:
>     Width/Height      : 384/256
>     Pixel Format      : 'NV12' (Y/UV 4:2:0)
>     Field             : None
>     Number of planes  : 1
>     Flags             :
>     Colorspace        : Default
>     Transfer Function : Default
>     YCbCr/HSV Encoding: Default
>     Quantization      : Default
>     Plane 0           :
>        Bytes per Line : 384
>        Size Image     : 147456
> VIDIOC_G_FMT: ok
> VIDIOC_S_FMT: ok
> Format Video Output Multiplanar:
>     Width/Height      : 320/240
>     Pixel Format      : 'H264' (H.264)
>     Field             : None
>     Number of planes  : 1
>     Flags             :
>     Colorspace        : Default
>     Transfer Function : Default
>     YCbCr/HSV Encoding: Default
>     Quantization      : Default
>     Plane 0           :
>        Bytes per Line : 0
>        Size Image     : 7077888
>         VIDIOC_REQBUFS returned 0 (Success)
>         VIDIOC_QUERYBUF returned 0 (Success)
>         VIDIOC_QUERYBUF returned 0 (Success)
>         VIDIOC_QUERYBUF returned 0 (Success)
>         VIDIOC_QUERYBUF returned 0 (Success)
>         VIDIOC_G_FMT returned 0 (Success)
>         VIDIOC_QBUF returned 0 (Success)
>         VIDIOC_QBUF returned 0 (Success)
>         VIDIOC_QBUF returned 0 (Success)
>         VIDIOC_QBUF returned 0 (Success)
>         VIDIOC_STREAMON returned 0 (Success)
> 
> <then nothing>
> 
> and :
> # v4l2-compliance --stream-from-hdr /Big_Buck_Bunny_1080_10s_5MB.264.hdr
> -s250 -d /dev/video0
> ...
> 
> v4l2-compliance 1.26.1-5142, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 4aee01a02792 2023-12-12 21:40:38
> 
> Compliance test for iris_driver device /dev/video0:
> 
> Driver Info:
>     Driver name      : iris_driver
>     Card type        : iris_decoder
>     Bus info         : platform:iris_icc
>     Driver version   : 6.11.0
>     Capabilities     : 0x84204000
>         Video Memory-to-Memory Multiplanar
>         Streaming
>         Extended Pix Format
>         Device Capabilities
>     Device Caps      : 0x04204000
>         Video Memory-to-Memory Multiplanar
>         Streaming
>         Extended Pix Format
>     Detected Stateful Decoder
> ...
> 
> Test input 0:
> 
> Streaming ioctls:
>     test read/write: OK (Not Supported)
>         fail: v4l2-test-buffers.cpp(2848): !thread_streamoff.done
>         fail: v4l2-test-buffers.cpp(2876): testBlockingDQBuf(node, q)
>     test blocking wait: FAIL
>         fail: v4l2-test-buffers.cpp(240): g_field() == V4L2_FIELD_ANY
>         fail: v4l2-test-buffers.cpp(1390): buf.qbuf(node)
>     test MMAP (select): FAIL
>         fail: v4l2-test-buffers.cpp(240): g_field() == V4L2_FIELD_ANY
>         fail: v4l2-test-buffers.cpp(1390): buf.qbuf(node)
>     test MMAP (epoll): FAIL
>     test USERPTR (select): OK (Not Supported)
>     test DMABUF: Cannot test, specify --expbuf-device
> 
> Total for iris_driver device /dev/video0: 51, Succeeded: 47, Failed: 4,
> Warnings: 0
> 
> but using ffmpeg seems to work:
> 
> # ffmpeg -r 1 -c:v h264_v4l2m2m -i /Big_Buck_Bunny_1080_10s_5MB.264.hdr
> -pix_fmt nv21 -f rawvideo -y out.nv21
> ffmpeg version 6.1.1 Copyright (c) 2000-2023 the FFmpeg developers
> ...
> Input #0, h264, from '/Big_Buck_Bunny_1080_10s_5MB.264.hdr':
>   Duration: N/A, bitrate: N/A
>   Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1080 [SAR 1:1
> DAR 16:9], 25 fps, 60 tbr, 1200k tbn
> [h264_v4l2m2m @ 0x26b7a540] Using device /dev/video0
> [h264_v4l2m2m @ 0x26b7a540] driver 'iris_driver' on card 'iris_decoder' in
> mplane mode
> [h264_v4l2m2m @ 0x26b7a540] requesting formats: output=H264/none
> capture=NV12/yuv420p
> Stream mapping:
>   Stream #0:0 -> #0:0 (h264 (h264_v4l2m2m) -> rawvideo (native))
> Press [q] to stop, [?] for help
> Output #0, rawvideo, to 'out.nv21':
>   Metadata:
>     encoder         : Lavf60.16.100
>   Stream #0:0: Video: rawvideo (NV21 / 0x3132564E), nv21(tv, progressive),
> 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, 24883 kb/s, 1 fps, 1 tbn
>     Metadata:
>       encoder         : Lavc60.31.102 rawvideo
> [out#0/rawvideo @ 0x26aae650] video:911250kB audio:0kB subtitle:0kB other
> streams:0kB global headers:0kB muxing overhead: 0.000000%
> frame=  300 fps= 95 q=-0.0 Lsize=  911250kB time=00:04:59.00
> bitrate=24966.4kbits/s speed=94.7x
> 
> I had to set output framerate to 1 otherwise ffmpeg would drop 298 frames:
> frame=    3 fps=0.9 q=-0.0 Lsize=    9112kB time=00:00:00.06
> bitrate=1119738.4kbits/s dup=0 drop=298 speed=0.0195x
> 
> Could you explain how do you test the driver and which wich stream ?
> 
We actually didn't run the v4l2-compliance with -s option while testing the
driver.
we tested without it and with Gstreamer :

gst-launch-1.0 filesrc
location=/media/media/fluster/resources/JVT-AVC_V1/CVSE3_Sony_H/CVSE3_Sony_H.jsv
! h264parse ! v4l2h264dec capture-io-mode=dmabuf output-io-mode=dmabuf !
kmssink

We will run v4l2-compliance with -s option and v4l-ctl, fixed the issues
and share the report in next version.

Thanks,
Dikshita
>>
>> Total for iris_driver device /dev/video0: 47, Succeeded: 46, Failed: 1,
>> Warnings: 0
>>
>> The result of v4l2-compliance test on SM8250:
>>
>> v4l2-compliance 1.29.0-5239, 64 bits, 64-bit time_t
>> v4l2-compliance SHA: a1ebb4dad512 2024-08-08 20:00:17
>>
>> Compliance test for iris_driver device /dev/video0:
>>
>> Driver Info:
>>          Driver name      : iris_driver
>>          Card type        : iris_decoder
>>          Bus info         : platform:iris_icc
>>          Driver version   : 6.11.0
>>          Capabilities     : 0x84204000
>>                  Video Memory-to-Memory Multiplanar
>>                  Streaming
>>                  Extended Pix Format
>>                  Device Capabilities
>>          Device Caps      : 0x04204000
>>                  Video Memory-to-Memory Multiplanar
>>                  Streaming
>>                  Extended Pix Format
>>          Detected Stateful Decoder
>>
>> Required ioctls:
>>          test VIDIOC_QUERYCAP: OK
>>          test invalid ioctls: OK
>>
>> Allow for multiple opens:
>>          test second /dev/video0 open: OK
>>          test VIDIOC_QUERYCAP: OK
>>          test VIDIOC_G/S_PRIORITY: OK
>>                  fail: ../utils/v4l2-compliance/v4l2-compliance.cpp(763):
>> !ok
>>          test for unlimited opens: FAIL
>>
>> Debug ioctls:
>>          test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>          test VIDIOC_LOG_STATUS: OK (Not Supported)
>>
>> Input ioctls:
>>          test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>          test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>          test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>          test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>          test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>          test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>          Inputs: 0 Audio Inputs: 0 Tuners: 0
>>
>> Output ioctls:
>>          test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>          test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>          test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>          test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>          test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>          Outputs: 0 Audio Outputs: 0 Modulators: 0
>>
>> Input/Output configuration ioctls:
>>          test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>          test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>          test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>          test VIDIOC_G/S_EDID: OK (Not Supported)
>>
>> Control ioctls:
>>          test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>          test VIDIOC_QUERYCTRL: OK
>>          test VIDIOC_G/S_CTRL: OK
>>          test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>          test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>          test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>          Standard Controls: 2 Private Controls: 0
>>
>> Format ioctls:
>>          test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>          test VIDIOC_G/S_PARM: OK (Not Supported)
>>          test VIDIOC_G_FBUF: OK (Not Supported)
>>          test VIDIOC_G_FMT: OK
>>          test VIDIOC_TRY_FMT: OK
>>          test VIDIOC_S_FMT: OK
>>          test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>          test Cropping: OK
>>          test Composing: OK
>>          test Scaling: OK (Not Supported)
>>
>> Codec ioctls:
>>          test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>          test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>          test VIDIOC_(TRY_)DECODER_CMD: OK
>>
>> Buffer ioctls:
>>          test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>          test CREATE_BUFS maximum buffers: OK
>>          test VIDIOC_REMOVE_BUFS: OK
>>          test VIDIOC_EXPBUF: OK (Not Supported)
>>          test Requests: OK (Not Supported)
>>
>> Total for iris_driver device /dev/video0: 47, Succeeded: 46, Failed: 1,
>> Warnings: 0
>>
>> Fluster score on SM8550:
>>
>> 77/135 while testing JVT-AVC_V1 with GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
>> The failing tests are:
>> - 52 test vectors failed due to interlaced clips: Interlaced decoding is
>>    not supported in iris driver.
>>    Test Vectors:
>>          cabac_mot_fld0_full
>>          cabac_mot_mbaff0_full
>>          cabac_mot_picaff0_full
>>          CABREF3_Sand_D
>>          CAFI1_SVA_C
>>          CAMA1_Sony_C
>>          CAMA1_TOSHIBA_B
>>          cama1_vtc_c
>>          cama2_vtc_b
>>          CAMA3_Sand_E
>>          cama3_vtc_b
>>          CAMACI3_Sony_C
>>          CAMANL1_TOSHIBA_B
>>          CAMANL2_TOSHIBA_B
>>          CAMANL3_Sand_E
>>          CAMASL3_Sony_B
>>          CAMP_MOT_MBAFF_L30
>>          CAMP_MOT_MBAFF_L31
>>          CANLMA2_Sony_C
>>          CANLMA3_Sony_C
>>          CAPA1_TOSHIBA_B
>>          CAPAMA3_Sand_F
>>          cavlc_mot_fld0_full_B
>>          cavlc_mot_mbaff0_full_B
>>          cavlc_mot_picaff0_full_B
>>          CVCANLMA2_Sony_C
>>          CVFI1_Sony_D
>>          CVFI1_SVA_C
>>          CVFI2_Sony_H
>>          CVFI2_SVA_C
>>          CVMA1_Sony_D
>>          CVMA1_TOSHIBA_B
>>          CVMANL1_TOSHIBA_B
>>          CVMANL2_TOSHIBA_B
>>          CVMAPAQP3_Sony_E
>>          CVMAQP2_Sony_G
>>          CVMAQP3_Sony_D
>>          CVMP_MOT_FLD_L30_B
>>          CVNLFI1_Sony_C
>>          CVNLFI2_Sony_H
>>          CVPA1_TOSHIBA_B
>>          FI1_Sony_E
>>          MR6_BT_B
>>          MR7_BT_B
>>          MR8_BT_B
>>          MR9_BT_B
>>          Sharp_MP_Field_1_B
>>          Sharp_MP_Field_2_B
>>          Sharp_MP_Field_3_B
>>          Sharp_MP_PAFF_1r2
>>          Sharp_MP_PAFF_2r
>>          CVMP_MOT_FRM_L31_B
>> - 3 test vectors failed due to unsupported bitstream.
>>    num_slice_group_minus1 greater than zero is not supported by the
>> hardware.
>>    Test Vectors:
>>          FM1_BT_B
>>          FM1_FT_E
>>          FM2_SVA_C
>> - 2 test vectors failed because SP_SLICE type is not supported by the
>> hardware.
>>    Test Vectors:
>>          SP1_BT_A
>>          sp2_bt_b
>> - 1 test vector failed due to unsupported profile:
>>    V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED is being deprecated from sm8550
>>    onwards due to hardware issues.
>>    Test Vectors:
>>          BA3_SVA_C
>>
>> 23/69 while testing JVT-FR-EXT with GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
>> The failing tests are:
>> - 21 test vectors failed due to interlaced clips: Interlaced decoding is
>>    not supported in iris driver.
>>    Test Vectors:
>>          brcm_freh4
>>          brcm_freh5
>>          brcm_freh6
>>          brcm_freh10
>>          brcm_freh11
>>          freh7_b
>>          FREXT01_JVC_D
>>          FREXT02_JVC_C
>>          FRExt2_Panasonic_C
>>          FRExt4_Panasonic_B
>>          HCAFF1_HHI_B
>>          HCAMFF1_HHI_B
>>          HCHP3_HHI_A
>>          HPCAFL_BRCM_C
>>          HPCAFLNL_BRCM_C
>>          HVLCFI0_Sony_B
>>          HVLCMFF0_Sony_B
>>          HVLCPFF0_Sony_B
>>          HPCAMAPALQ_BRCM_B
>>          HPCVFL_BRCM_A
>>          HPCVFLNL_BRCM_A
>> - 2 test vectors failed due to 10bit bitstream: 10bit decoding is not
>>    supported in iris driver
>>    Test Vectors:
>>          FREH10-1
>>          FREH10-2
>> - 21 test vectors failed due to unsupported profile:
>>    V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the hardware.
>>    Test Vectors:
>>          FREXT1_TANDBERG_A
>>          FREXT2_TANDBERG_A
>>          FREXT3_TANDBERG_A
>>          Hi422FR1_SONY_A
>>          Hi422FR2_SONY_A
>>          Hi422FR3_SONY_A
>>          Hi422FR4_SONY_A
>>          Hi422FR6_SONY_A
>>          Hi422FR7_SONY_A
>>          Hi422FR8_SONY_A
>>          Hi422FR9_SONY_A
>>          Hi422FR10_SONY_A
>>          Hi422FR11_SONY_A
>>          Hi422FR12_SONY_A
>>          Hi422FR13_SONY_A
>>          Hi422FR14_SONY_A
>>          Hi422FR15_SONY_A
>>          Hi422FREXT16_SONY_A
>>          Hi422FREXT17_SONY_A
>>          Hi422FREXT18_SONY_A
>>          Hi422FREXT19_SONY_A
>> - 2 test vectors failed due to unsupported bitstream.
>>    chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not
>>    supported by the hardware.
>>    Test Vectors:
>>          HPCAMOLQ_BRCM_B
>>          HPCVMOLQ_BRCM_B
>>
>> Fluster score on SM8250:
>>
>> 78/135 while testing JVT-AVC_V1 with GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
>> The failing tests are:
>> - 52 test vectors failed due to interlaced clips: Interlaced decoding is not
>>    supported in iris driver.
>>    Test Vectors:
>>          cabac_mot_fld0_full
>>          cabac_mot_mbaff0_full
>>          cabac_mot_picaff0_full
>>          CABREF3_Sand_D
>>          CAFI1_SVA_C
>>          CAMA1_Sony_C
>>          CAMA1_TOSHIBA_B
>>          cama1_vtc_c
>>          cama2_vtc_b
>>          CAMA3_Sand_E
>>          cama3_vtc_b
>>          CAMACI3_Sony_C
>>          CAMANL1_TOSHIBA_B
>>          CAMANL2_TOSHIBA_B
>>          CAMANL3_Sand_E
>>          CAMASL3_Sony_B
>>          CAMP_MOT_MBAFF_L30
>>          CAMP_MOT_MBAFF_L31
>>          CANLMA2_Sony_C
>>          CANLMA3_Sony_C
>>          CAPA1_TOSHIBA_B
>>          CAPAMA3_Sand_F
>>          cavlc_mot_fld0_full_B
>>          cavlc_mot_mbaff0_full_B
>>          cavlc_mot_picaff0_full_B
>>          CVCANLMA2_Sony_C
>>          CVFI1_Sony_D
>>          CVFI1_SVA_C
>>          CVFI2_Sony_H
>>          CVFI2_SVA_C
>>          CVMA1_Sony_D
>>          CVMA1_TOSHIBA_B
>>          CVMANL1_TOSHIBA_B
>>          CVMANL2_TOSHIBA_B
>>          CVMAPAQP3_Sony_E
>>          CVMAQP2_Sony_G
>>          CVMAQP3_Sony_D
>>          CVMP_MOT_FLD_L30_B
>>          CVNLFI1_Sony_C
>>          CVNLFI2_Sony_H
>>          CVPA1_TOSHIBA_B
>>          FI1_Sony_E
>>          MR6_BT_B
>>          MR7_BT_B
>>          MR8_BT_B
>>          MR9_BT_B
>>          Sharp_MP_Field_1_B
>>          Sharp_MP_Field_2_B
>>          Sharp_MP_Field_3_B
>>          Sharp_MP_PAFF_1r2
>>          Sharp_MP_PAFF_2r
>>          CVMP_MOT_FRM_L31_B
>> - 3 test vectors failed due to unsupported bitstream.
>>    num_slice_group_minus1 greater than zero is not supported by the
>> hardware.
>>    Test Vectors:
>>          FM1_BT_B
>>          FM1_FT_E
>>          FM2_SVA_C
>> - 2 test vectors failed because SP_SLICE type is not supported by the
>> hardware.
>>    Test Vectors:
>>          SP1_BT_A
>>          sp2_bt_b
>>
>> 23/69 while testing JVT-FR-EXT with GStreamer-H.264-V4L2-Gst1.0.JVT-AVC_V1.
>> The failing tests are:
>> - 21 test vectors failed due to interlaced clips: Interlaced decoding is
>>    not supported in iris driver.
>>    Test Vectors:
>>          brcm_freh4
>>          brcm_freh5
>>          brcm_freh6
>>          brcm_freh10
>>          brcm_freh11
>>          freh7_b
>>          FREXT01_JVC_D
>>          FREXT02_JVC_C
>>          FRExt2_Panasonic_C
>>          FRExt4_Panasonic_B
>>          HCAFF1_HHI_B
>>          HCAMFF1_HHI_B
>>          HCHP3_HHI_A
>>          HPCAFL_BRCM_C
>>          HPCAFLNL_BRCM_C
>>          HVLCFI0_Sony_B
>>          HVLCMFF0_Sony_B
>>          HVLCPFF0_Sony_B
>>          HPCAMAPALQ_BRCM_B
>>          HPCVFL_BRCM_A
>>          HPCVFLNL_BRCM_A
>> - 2 test vectors failed due to 10bit bitstream: 10bit decoding is not
>>    supported in iris driver
>>    Test Vectors:
>>          FREH10-1
>>          FREH10-2
>> - 21 test vectors failed due to unsupported profile:
>>    V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 is not supported by the hardware.
>>    Test Vectors:
>>          FREXT1_TANDBERG_A
>>          FREXT2_TANDBERG_A
>>          FREXT3_TANDBERG_A
>>          Hi422FR1_SONY_A
>>          Hi422FR2_SONY_A
>>          Hi422FR3_SONY_A
>>          Hi422FR4_SONY_A
>>          Hi422FR6_SONY_A
>>          Hi422FR7_SONY_A
>>          Hi422FR8_SONY_A
>>          Hi422FR9_SONY_A
>>          Hi422FR10_SONY_A
>>          Hi422FR11_SONY_A
>>          Hi422FR12_SONY_A
>>          Hi422FR13_SONY_A
>>          Hi422FR14_SONY_A
>>          Hi422FR15_SONY_A
>>          Hi422FREXT16_SONY_A
>>          Hi422FREXT17_SONY_A
>>          Hi422FREXT18_SONY_A
>>          Hi422FREXT19_SONY_A
>> - 2 test vectors failed due to unsupported bitstream.
>>    chroma_fmt_idc is equal to 0(monochrome) in the bitstream which is not
>>    supported by the hardware.
>>    Test Vectors:
>>          HPCAMOLQ_BRCM_B
>>          HPCVMOLQ_BRCM_B
>>
>> Signed-off-by: Dikshita Agarwal <quic_dikshita@...cinc.com>
>> ---
>> Dikshita Agarwal (17):
>>        dt-bindings: media: Add sm8550 dt schema
>>        media: MAINTAINERS: Add Qualcomm Iris video accelerator driver
>>        media: iris: add platform driver for iris video device
>>        media: iris: initialize power resources
>>        media: iris: implement iris v4l2 file ops
>>        media: iris: introduce iris core state management with shared queues
>>        media: iris: implement video firmware load/unload
>>        media: iris: implement boot sequence of the firmware
>>        media: iris: introduce Host firmware interface with necessary hooks
>>        media: iris: implement power management
>>        media: iris: implement reqbuf ioctl with vb2_queue_setup
>>        media: iris: implement vb2 streaming ops
>>        media: iris: allocate, initialize and queue internal buffers
>>        media: iris: implement vb2 ops for buf_queue and firmware response
>>        media: iris: add support for dynamic resolution change
>>        media: iris: handle streamoff/on from client in dynamic resolution
>> change
>>        media: iris: add support for drain sequence
>>
>> Vedang Nagar (12):
>>        media: iris: implement s_fmt, g_fmt and try_fmt ioctls
>>        media: iris: implement g_selection ioctl
>>        media: iris: implement enum_fmt and enum_frameintervals ioctls
>>        media: iris: implement subscribe_event and unsubscribe_event ioctls
>>        media: iris: implement iris v4l2_ctrl_ops and prepare capabilities
>>        media: iris: implement query_cap, query_ctrl and query_menu ioctls
>>        media: iris: implement set properties to firmware during streamon
>>        media: iris: subscribe parameters and properties to firmware for
>> hfi_gen2
>>        media: iris: add check whether the video session is supported or not
>>        media: iris: implement power scaling for vpu2 and vpu3
>>        media: iris: add allow checks for v4l2 ioctls
>>        media: iris: add check to allow sub states transitions
>>
>>   .../bindings/media/qcom,sm8550-iris.yaml           |  162 ++++
>>   MAINTAINERS                                        |   11 +
>>   drivers/media/platform/qcom/Kconfig                |    1 +
>>   drivers/media/platform/qcom/Makefile               |    1 +
>>   drivers/media/platform/qcom/iris/Kconfig           |   13 +
>>   drivers/media/platform/qcom/iris/Makefile          |   27 +
>>   drivers/media/platform/qcom/iris/iris_buffer.c     |  599 ++++++++++++
>>   drivers/media/platform/qcom/iris/iris_buffer.h     |  117 +++
>>   drivers/media/platform/qcom/iris/iris_core.c       |   99 ++
>>   drivers/media/platform/qcom/iris/iris_core.h       |  107 +++
>>   drivers/media/platform/qcom/iris/iris_ctrls.c      |  296 ++++++
>>   drivers/media/platform/qcom/iris/iris_ctrls.h      |   22 +
>>   drivers/media/platform/qcom/iris/iris_firmware.c   |  151 +++
>>   drivers/media/platform/qcom/iris/iris_firmware.h   |   15 +
>>   drivers/media/platform/qcom/iris/iris_hfi_common.c |  222 +++++
>>   drivers/media/platform/qcom/iris/iris_hfi_common.h |  155 +++
>>   drivers/media/platform/qcom/iris/iris_hfi_gen1.h   |   16 +
>>   .../platform/qcom/iris/iris_hfi_gen1_command.c     |  834 ++++++++++++++++
>>   .../platform/qcom/iris/iris_hfi_gen1_defines.h     |  448 +++++++++
>>   .../platform/qcom/iris/iris_hfi_gen1_response.c    |  658 +++++++++++++
>>   drivers/media/platform/qcom/iris/iris_hfi_gen2.h   |   41 +
>>   .../platform/qcom/iris/iris_hfi_gen2_command.c     | 1003
>> ++++++++++++++++++++
>>   .../platform/qcom/iris/iris_hfi_gen2_defines.h     |  160 ++++
>>   .../platform/qcom/iris/iris_hfi_gen2_packet.c      |  328 +++++++
>>   .../platform/qcom/iris/iris_hfi_gen2_packet.h      |  125 +++
>>   .../platform/qcom/iris/iris_hfi_gen2_response.c    |  954
>> +++++++++++++++++++
>>   drivers/media/platform/qcom/iris/iris_hfi_queue.c  |  343 +++++++
>>   drivers/media/platform/qcom/iris/iris_hfi_queue.h  |  180 ++++
>>   drivers/media/platform/qcom/iris/iris_instance.h   |   73 ++
>>   .../platform/qcom/iris/iris_platform_common.h      |  195 ++++
>>   .../platform/qcom/iris/iris_platform_sm8250.c      |  175 ++++
>>   .../platform/qcom/iris/iris_platform_sm8550.c      |  310 ++++++
>>   drivers/media/platform/qcom/iris/iris_power.c      |  182 ++++
>>   drivers/media/platform/qcom/iris/iris_power.h      |   15 +
>>   drivers/media/platform/qcom/iris/iris_probe.c      |  257 +++++
>>   drivers/media/platform/qcom/iris/iris_resources.c  |  338 +++++++
>>   drivers/media/platform/qcom/iris/iris_resources.h  |   27 +
>>   drivers/media/platform/qcom/iris/iris_state.c      |  338 +++++++
>>   drivers/media/platform/qcom/iris/iris_state.h      |  153 +++
>>   drivers/media/platform/qcom/iris/iris_utils.c      |   96 ++
>>   drivers/media/platform/qcom/iris/iris_utils.h      |   50 +
>>   drivers/media/platform/qcom/iris/iris_vb2.c        |  353 +++++++
>>   drivers/media/platform/qcom/iris/iris_vb2.h        |   17 +
>>   drivers/media/platform/qcom/iris/iris_vdec.c       |  693 ++++++++++++++
>>   drivers/media/platform/qcom/iris/iris_vdec.h       |   25 +
>>   drivers/media/platform/qcom/iris/iris_vidc.c       |  706 ++++++++++++++
>>   drivers/media/platform/qcom/iris/iris_vidc.h       |   15 +
>>   drivers/media/platform/qcom/iris/iris_vpu2.c       |   39 +
>>   drivers/media/platform/qcom/iris/iris_vpu3.c       |  125 +++
>>   drivers/media/platform/qcom/iris/iris_vpu_buffer.c |  311 ++++++
>>   drivers/media/platform/qcom/iris/iris_vpu_buffer.h |   91 ++
>>   drivers/media/platform/qcom/iris/iris_vpu_common.c |  371 ++++++++
>>   drivers/media/platform/qcom/iris/iris_vpu_common.h |   28 +
>>   .../platform/qcom/iris/iris_vpu_register_defines.h |   17 +
>>   54 files changed, 12088 insertions(+)
>> ---
>> base-commit: 31aaa7d95e09892c81df0d7c49ae85640fa4e202
>> change-id: 20240827-iris_v3-4b30e9610e7f
>>
>> Best regards,
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ