| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+V-a8uZP0_kvtNYzfTA8atn=wgFrabLODxyVuyYvjR68z=HZA@mail.gmail.com>
Date: Wed, 25 Sep 2024 16:24:52 +0100
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Sakari Ailus <sakari.ailus@...ux.intel.com>,
Kieran Bingham <kieran.bingham@...asonboard.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
Jacopo Mondi <jacopo.mondi@...asonboard.com>, Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>, linux-media@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH v2 04/11] media: i2c: ov5645: Use dev_err_probe instead of dev_err
Hi Laurent,
Thank you for the review.
On Tue, Sep 24, 2024 at 11:44 PM Laurent Pinchart
<laurent.pinchart@...asonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Tue, Sep 10, 2024 at 06:06:03PM +0100, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> >
> > Drop dev_err() and use the dev_err_probe() helper on probe path.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > ---
> > drivers/media/i2c/ov5645.c | 74 +++++++++++++++-----------------------
> > 1 file changed, 28 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> > index 78b86438c798..9e6ff1f1b9ac 100644
> > --- a/drivers/media/i2c/ov5645.c
> > +++ b/drivers/media/i2c/ov5645.c
> > @@ -1076,51 +1076,37 @@ static int ov5645_probe(struct i2c_client *client)
> > ov5645->dev = dev;
> >
> > endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
> > - if (!endpoint) {
> > - dev_err(dev, "endpoint node not found\n");
> > - return -EINVAL;
> > - }
> > + if (!endpoint)
> > + return dev_err_probe(dev, -EINVAL, "endpoint node not found\n");
> >
> > ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint),
> > &ov5645->ep);
> >
> > of_node_put(endpoint);
> >
> > - if (ret < 0) {
> > - dev_err(dev, "parsing endpoint node failed\n");
> > - return ret;
> > - }
> > + if (ret < 0)
> > + return dev_err_probe(dev, ret, "parsing endpoint node failed\n");
> >
> > - if (ov5645->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
> > - dev_err(dev, "invalid bus type, must be CSI2\n");
> > - return -EINVAL;
> > - }
> > + if (ov5645->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
> > + return dev_err_probe(dev, -EINVAL, "invalid bus type, must be CSI2\n");
> >
> > /* get system clock (xclk) */
> > ov5645->xclk = devm_clk_get(dev, NULL);
> > - if (IS_ERR(ov5645->xclk)) {
> > - dev_err(dev, "could not get xclk");
> > - return PTR_ERR(ov5645->xclk);
> > - }
> > + if (IS_ERR(ov5645->xclk))
> > + return dev_err_probe(dev, PTR_ERR(ov5645->xclk), "could not get xclk");
> >
> > ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
> > - if (ret) {
> > - dev_err(dev, "could not get xclk frequency\n");
> > - return ret;
> > - }
> > + if (ret)
> > + return dev_err_probe(dev, ret, "could not get xclk frequency\n");
> >
> > /* external clock must be 24MHz, allow 1% tolerance */
> > - if (xclk_freq < 23760000 || xclk_freq > 24240000) {
> > - dev_err(dev, "external clock frequency %u is not supported\n",
> > - xclk_freq);
> > - return -EINVAL;
> > - }
> > + if (xclk_freq < 23760000 || xclk_freq > 24240000)
> > + return dev_err_probe(dev, -EINVAL, "external clock frequency %u is not supported\n",
> > + xclk_freq);
> >
> > ret = clk_set_rate(ov5645->xclk, xclk_freq);
> > - if (ret) {
> > - dev_err(dev, "could not set xclk frequency\n");
> > - return ret;
> > - }
> > + if (ret)
> > + return dev_err_probe(dev, ret, "could not set xclk frequency\n");
> >
> > for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
> > ov5645->supplies[i].supply = ov5645_supply_name[i];
> > @@ -1131,16 +1117,12 @@ static int ov5645_probe(struct i2c_client *client)
> > return ret;
> >
> > ov5645->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
> > - if (IS_ERR(ov5645->enable_gpio)) {
> > - dev_err(dev, "cannot get enable gpio\n");
> > - return PTR_ERR(ov5645->enable_gpio);
> > - }
> > + if (IS_ERR(ov5645->enable_gpio))
> > + return dev_err_probe(dev, PTR_ERR(ov5645->enable_gpio), "cannot get enable gpio\n");
>
> Those lines are getting long. We usually try to wrap at 80 columns for
> sensor drivers:
>
As there will be a v3 anyway, I'll wrap it to 80 columns.
> return dev_err_probe(dev, PTR_ERR(ov5645->enable_gpio),
> "cannot get enable gpio\n");
>
> Same elsewhere. I'll let Sakari decide.
>
> >
> > ov5645->rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> > - if (IS_ERR(ov5645->rst_gpio)) {
> > - dev_err(dev, "cannot get reset gpio\n");
> > - return PTR_ERR(ov5645->rst_gpio);
> > - }
> > + if (IS_ERR(ov5645->rst_gpio))
> > + return dev_err_probe(dev, PTR_ERR(ov5645->rst_gpio), "cannot get reset gpio\n");
> >
> > mutex_init(&ov5645->power_lock);
> >
> > @@ -1177,9 +1159,9 @@ static int ov5645_probe(struct i2c_client *client)
> > ov5645->sd.ctrl_handler = &ov5645->ctrls;
> >
> > if (ov5645->ctrls.error) {
> > - dev_err(dev, "%s: control initialization error %d\n",
> > - __func__, ov5645->ctrls.error);
> > ret = ov5645->ctrls.error;
> > + dev_err_probe(dev, ret, "%s: control initialization error %d\n",
> > + __func__, ov5645->ctrls.error);
> > goto free_ctrl;
> > }
> >
> > @@ -1192,7 +1174,7 @@ static int ov5645_probe(struct i2c_client *client)
> >
> > ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad);
> > if (ret < 0) {
> > - dev_err(dev, "could not register media entity\n");
> > + dev_err_probe(dev, ret, "could not register media entity\n");
> > goto free_ctrl;
> > }
> >
> > @@ -1202,14 +1184,14 @@ static int ov5645_probe(struct i2c_client *client)
> >
> > ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high);
> > if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) {
> > - dev_err(dev, "could not read ID high\n");
> > ret = -ENODEV;
> > + dev_err_probe(dev, ret, "could not read ID high\n");
> > goto power_down;
> > }
> > ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_LOW, &chip_id_low);
> > if (ret < 0 || chip_id_low != OV5645_CHIP_ID_LOW_BYTE) {
> > - dev_err(dev, "could not read ID low\n");
> > ret = -ENODEV;
> > + dev_err_probe(dev, ret, "could not read ID low\n");
> > goto power_down;
> > }
> >
> > @@ -1218,24 +1200,24 @@ static int ov5645_probe(struct i2c_client *client)
> > ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL,
> > &ov5645->aec_pk_manual);
> > if (ret < 0) {
> > - dev_err(dev, "could not read AEC/AGC mode\n");
> > ret = -ENODEV;
> > + dev_err_probe(dev, ret, "could not read AEC/AGC mode\n");
> > goto power_down;
> > }
> >
> > ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20,
> > &ov5645->timing_tc_reg20);
> > if (ret < 0) {
> > - dev_err(dev, "could not read vflip value\n");
> > ret = -ENODEV;
> > + dev_err_probe(dev, ret, "could not read vflip value\n");
> > goto power_down;
> > }
> >
> > ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21,
> > &ov5645->timing_tc_reg21);
> > if (ret < 0) {
> > - dev_err(dev, "could not read hflip value\n");
> > ret = -ENODEV;
> > + dev_err_probe(dev, ret, "could not read hflip value\n");
> > goto power_down;
> > }
> >
> > @@ -1243,7 +1225,7 @@ static int ov5645_probe(struct i2c_client *client)
> >
> > ret = v4l2_async_register_subdev(&ov5645->sd);
> > if (ret < 0) {
> > - dev_err(dev, "could not register v4l2 device\n");
> > + dev_err_probe(dev, ret, "could not register v4l2 device\n");
> > goto power_down;
> > }
> >
>
> The probe function looks really young, I think it would benefit from
> being broken down in multiple functions.
>
I will add this once this initial series gets accepted.
Cheers,
Prabhakar
Powered by blists - more mailing lists