[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e5b5aa3f-c766-2966-72f1-0dbf08b1e19a@loongson.cn>
Date: Wed, 25 Sep 2024 14:17:46 +0800
From: Zhao Qunqin <zhaoqunqin@...ngson.cn>
To: Huacai Chen <chenhuacai@...nel.org>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org, bp@...en8.de,
tony.luck@...el.com, linux-edac@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, kernel@...0n.name, james.morse@....com,
mchehab@...nel.org, rric@...nel.org, loongarch@...ts.linux.dev
Subject: Re: [PATCH v5 2/2] Loongarch: EDAC driver for loongson memory
controller
在 2024/9/25 下午12:46, Huacai Chen 写道:
> Hi, Qunqin,
>
> The title should be "EDAC: Add EDAC driver for loongson memory controller"
Will fix
> On Wed, Sep 25, 2024 at 10:40 AM Zhao Qunqin <zhaoqunqin@...ngson.cn> wrote:
>> Reports single bit errors (CE) only.
>>
>> Signed-off-by: Zhao Qunqin <zhaoqunqin@...ngson.cn>
>> ---
>> Changes in v5:
>> - Drop the loongson_ prefix from all static functions.
>> - Align function arguments on the opening brace.
>> - Drop useless comments and useless wrapper. Drop side comments.
>> - Reorder variable declarations.
>>
>> Changes in v4:
>> - None
>>
>> Changes in v3:
>> - Addressed review comments raised by Krzysztof and Huacai
>>
>> Changes in v2:
>> - Addressed review comments raised by Krzysztof
>>
>> MAINTAINERS | 1 +
>> arch/loongarch/Kconfig | 1 +
>> drivers/edac/Kconfig | 8 ++
>> drivers/edac/Makefile | 1 +
>> drivers/edac/loongson_edac.c | 168 +++++++++++++++++++++++++++++++++++
>> 5 files changed, 179 insertions(+)
>> create mode 100644 drivers/edac/loongson_edac.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 6cc8cfc8f..5b4526638 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -13242,6 +13242,7 @@ M: Zhao Qunqin <zhaoqunqin@...ngson.cn>
>> L: linux-edac@...r.kernel.org
>> S: Maintained
>> F: Documentation/devicetree/bindings/edac/loongson,ls3a5000-mc-edac.yaml
>> +F: drivers/edac/loongson_edac.c
>>
>> LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
>> M: Sathya Prakash <sathya.prakash@...adcom.com>
>> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
>> index 70f169210..9c135f1a2 100644
>> --- a/arch/loongarch/Kconfig
>> +++ b/arch/loongarch/Kconfig
>> @@ -181,6 +181,7 @@ config LOONGARCH
>> select PCI_MSI_ARCH_FALLBACKS
>> select PCI_QUIRKS
>> select PERF_USE_VMALLOC
>> + select EDAC_SUPPORT
>> select RTC_LIB
>> select SPARSE_IRQ
>> select SYSCTL_ARCH_UNALIGN_ALLOW
>> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
>> index 81af6c344..719bb6ca7 100644
>> --- a/drivers/edac/Kconfig
>> +++ b/drivers/edac/Kconfig
>> @@ -564,5 +564,13 @@ config EDAC_VERSAL
>> Support injecting both correctable and uncorrectable errors
>> for debugging purposes.
>>
>> +config EDAC_LOONGSON3
>> + tristate "Loongson-3 Memory Controller"
>> + depends on LOONGARCH || COMPILE_TEST
>> + help
>> + Support for error detection and correction on the Loongson-3
>> + family memory controller. This driver reports single bit
>> + errors (CE) only. Loongson-3A5000/3C5000/3D5000/3C5000L/3A6000/3C6000
>> + are compatible.
>>
>> endif # EDAC
>> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
>> index faf310eec..e72ca1be4 100644
>> --- a/drivers/edac/Makefile
>> +++ b/drivers/edac/Makefile
>> @@ -88,3 +88,4 @@ obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o
>> obj-$(CONFIG_EDAC_NPCM) += npcm_edac.o
>> obj-$(CONFIG_EDAC_ZYNQMP) += zynqmp_edac.o
>> obj-$(CONFIG_EDAC_VERSAL) += versal_edac.o
>> +obj-$(CONFIG_EDAC_LOONGSON3) += loongson_edac.o
> Change the Kconfig name to CONFIG_EDAC_LOONGSON, or change the file
> name to loongson3_edac.c may be a little better.
>
> Huacai
Will fix
>> diff --git a/drivers/edac/loongson_edac.c b/drivers/edac/loongson_edac.c
>> new file mode 100644
>> index 000000000..2721dfba5
>> --- /dev/null
>> +++ b/drivers/edac/loongson_edac.c
>> @@ -0,0 +1,168 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2024 Loongson Technology Corporation Limited.
>> + */
>> +
>> +#include <linux/edac.h>
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "edac_module.h"
>> +
>> +enum ecc_index {
>> + ECC_SET = 0,
>> + ECC_RESERVED,
>> + ECC_COUNT,
>> + ECC_CS_COUNT,
>> + ECC_CODE,
>> + ECC_ADDR,
>> + ECC_DATA0,
>> + ECC_DATA1,
>> + ECC_DATA2,
>> + ECC_DATA3,
>> +};
>> +
>> +struct loongson_edac_pvt {
>> + u64 *ecc_base;
>> + int last_ce_count;
>> +};
>> +
>> +static int read_ecc(struct mem_ctl_info *mci)
>> +{
>> + struct loongson_edac_pvt *pvt = mci->pvt_info;
>> + u64 ecc;
>> + int cs;
>> +
>> + if (!pvt->ecc_base)
>> + return pvt->last_ce_count;
>> +
>> + ecc = pvt->ecc_base[ECC_CS_COUNT];
>> + /* cs0 -- cs3 */
>> + cs = ecc & 0xff;
>> + cs += (ecc >> 8) & 0xff;
>> + cs += (ecc >> 16) & 0xff;
>> + cs += (ecc >> 24) & 0xff;
>> +
>> + return cs;
>> +}
>> +
>> +static void edac_check(struct mem_ctl_info *mci)
>> +{
>> + struct loongson_edac_pvt *pvt = mci->pvt_info;
>> + int new, add;
>> +
>> + new = read_ecc(mci);
>> + add = new - pvt->last_ce_count;
>> + pvt->last_ce_count = new;
>> + if (add <= 0)
>> + return;
>> +
>> + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add,
>> + 0, 0, 0, 0, 0, -1, "error", "");
>> + edac_mc_printk(mci, KERN_INFO, "add: %d", add);
>> +}
>> +
>> +static int get_dimm_config(struct mem_ctl_info *mci)
>> +{
>> + struct dimm_info *dimm;
>> + u32 size, npages;
>> +
>> + /* size not used */
>> + size = -1;
>> + npages = MiB_TO_PAGES(size);
>> +
>> + dimm = edac_get_dimm(mci, 0, 0, 0);
>> + dimm->nr_pages = npages;
>> + snprintf(dimm->label, sizeof(dimm->label),
>> + "MC#%uChannel#%u_DIMM#%u", mci->mc_idx, 0, 0);
>> + dimm->grain = 8;
>> +
>> + return 0;
>> +}
>> +
>> +static void pvt_init(struct mem_ctl_info *mci, u64 *vbase)
>> +{
>> + struct loongson_edac_pvt *pvt = mci->pvt_info;
>> +
>> + pvt->ecc_base = vbase;
>> + pvt->last_ce_count = read_ecc(mci);
>> +}
>> +
>> +static int edac_probe(struct platform_device *pdev)
>> +{
>> + struct edac_mc_layer layers[2];
>> + struct loongson_edac_pvt *pvt;
>> + struct mem_ctl_info *mci;
>> + u64 *vbase;
>> + int ret;
>> +
>> + vbase = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(vbase))
>> + return PTR_ERR(vbase);
>> +
>> + /* allocate a new MC control structure */
>> + layers[0].type = EDAC_MC_LAYER_CHANNEL;
>> + layers[0].size = 1;
>> + layers[0].is_virt_csrow = false;
>> + layers[1].type = EDAC_MC_LAYER_SLOT;
>> + layers[1].size = 1;
>> + layers[1].is_virt_csrow = true;
>> + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
>> + if (mci == NULL)
>> + return -ENOMEM;
>> +
>> + mci->mc_idx = edac_device_alloc_index();
>> + mci->mtype_cap = MEM_FLAG_RDDR4;
>> + mci->edac_ctl_cap = EDAC_FLAG_NONE;
>> + mci->edac_cap = EDAC_FLAG_NONE;
>> + mci->mod_name = "loongson_edac.c";
>> + mci->ctl_name = "loongson_edac_ctl";
>> + mci->dev_name = "loongson_edac_dev";
>> + mci->ctl_page_to_phys = NULL;
>> + mci->pdev = &pdev->dev;
>> + mci->error_desc.grain = 8;
>> + /* Set the function pointer to an actual operation function */
>> + mci->edac_check = edac_check;
>> +
>> + pvt_init(mci, vbase);
>> + get_dimm_config(mci);
>> +
>> + ret = edac_mc_add_mc(mci);
>> + if (ret) {
>> + edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
>> + edac_mc_free(mci);
>> + return ret;
>> + }
>> + edac_op_state = EDAC_OPSTATE_POLL;
>> +
>> + return 0;
>> +}
>> +
>> +static void edac_remove(struct platform_device *pdev)
>> +{
>> + struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev);
>> +
>> + if (mci)
>> + edac_mc_free(mci);
>> +}
>> +
>> +static const struct of_device_id loongson_edac_of_match[] = {
>> + { .compatible = "loongson,ls3a5000-mc-edac", },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, loongson_edac_of_match);
>> +
>> +static struct platform_driver loongson_edac_driver = {
>> + .probe = edac_probe,
>> + .remove = edac_remove,
>> + .driver = {
>> + .name = "loongson-mc-edac",
>> + .of_match_table = loongson_edac_of_match,
>> + },
>> +};
>> +module_platform_driver(loongson_edac_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Zhao Qunqin <zhaoqunqin@...ngson.cn>");
>> +MODULE_DESCRIPTION("EDAC driver for loongson memory controller");
>> --
>> 2.43.0
>>
>>
Powered by blists - more mailing lists