[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1728491303-1456171-2-git-send-email-radhey.shyam.pandey@amd.com>
Date: Wed, 9 Oct 2024 21:58:21 +0530
From: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <michal.simek@....com>, <harini.katakam@....com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<git@....com>, Abin Joseph <abin.joseph@....com>, Radhey Shyam Pandey
<radhey.shyam.pandey@....com>
Subject: [PATCH net-next v3 1/3] dt-bindings: net: emaclite: Add clock support
From: Abin Joseph <abin.joseph@....com>
Add s_axi_aclk AXI4 clock support. Traditionally this IP was used on
microblaze platforms which had fixed clocks enabled all the time. But
since its a PL IP, it can also be used on SoC platforms like Zynq
UltraScale+ MPSoC which combines processing system (PS) and user
programmable logic (PL) into the same device. On these platforms instead
of fixed enabled clocks it is mandatory to explicitly enable IP clocks
for proper functionality.
So make clock a required property and also define max supported clock
constraints.
Signed-off-by: Abin Joseph <abin.joseph@....com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
Acked-by: Conor Dooley <conor.dooley@...rochip.com>
---
Changes for v3:
- Add Conor acked-by tag.
Changes for v2:
- Make clocks as required property.
---
Documentation/devicetree/bindings/net/xlnx,emaclite.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
index 92d8ade988f6..e16384aff557 100644
--- a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
+++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
@@ -29,6 +29,9 @@ properties:
interrupts:
maxItems: 1
+ clocks:
+ maxItems: 1
+
phy-handle: true
local-mac-address: true
@@ -45,6 +48,7 @@ required:
- compatible
- reg
- interrupts
+ - clocks
- phy-handle
additionalProperties: false
@@ -56,6 +60,7 @@ examples:
reg = <0x40e00000 0x10000>;
interrupt-parent = <&axi_intc_1>;
interrupts = <1>;
+ clocks = <&dummy>;
local-mac-address = [00 00 00 00 00 00];
phy-handle = <&phy0>;
xlnx,rx-ping-pong;
--
2.34.1
Powered by blists - more mailing lists