| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1f5a321e-6f95-4eeb-80e4-24d96d5034ef@nxp.com>
Date: Wed, 9 Oct 2024 16:33:11 +0800
From: Liu Ying <victor.liu@....com>
To: Biju Das <biju.das.jz@...renesas.com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>
Cc: "andrzej.hajda@...el.com" <andrzej.hajda@...el.com>,
"neil.armstrong@...aro.org" <neil.armstrong@...aro.org>,
"rfoss@...nel.org" <rfoss@...nel.org>,
"laurent.pinchart" <laurent.pinchart@...asonboard.com>,
"jonas@...boo.se" <jonas@...boo.se>,
"jernej.skrabec@...il.com" <jernej.skrabec@...il.com>,
"maarten.lankhorst@...ux.intel.com" <maarten.lankhorst@...ux.intel.com>,
"mripard@...nel.org" <mripard@...nel.org>,
"tzimmermann@...e.de" <tzimmermann@...e.de>,
"airlied@...il.com" <airlied@...il.com>, "simona@...ll.ch"
<simona@...ll.ch>, "robh@...nel.org" <robh@...nel.org>,
"krzk+dt@...nel.org" <krzk+dt@...nel.org>,
"conor+dt@...nel.org" <conor+dt@...nel.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will@...nel.org" <will@...nel.org>,
"quic_bjorande@...cinc.com" <quic_bjorande@...cinc.com>,
"geert+renesas@...der.be" <geert+renesas@...der.be>,
"dmitry.baryshkov@...aro.org" <dmitry.baryshkov@...aro.org>,
"arnd@...db.de" <arnd@...db.de>,
"nfraprado@...labora.com" <nfraprado@...labora.com>,
"o.rempel@...gutronix.de" <o.rempel@...gutronix.de>,
"y.moog@...tec.de" <y.moog@...tec.de>
Subject: Re: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
On 09/30/2024, Biju Das wrote:
> Hi Liu,
Hi Biju,
>
>> -----Original Message-----
>> From: Biju Das
>> Sent: Monday, September 30, 2024 10:16 AM
>> Subject: RE: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
>>
>> Hi Liu,
>>
>> Thanks for the patch.
>>
>>> -----Original Message-----
>>> From: linux-arm-kernel <linux-arm-kernel-bounces@...ts.infradead.org>
>>> On Behalf Of Liu Ying
>>> Sent: Monday, September 30, 2024 6:29 AM
>>> Subject: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
>>>
>>> Add basic HDMI video output support. Currently, only RGB888 output
>>> pixel format is supported. At the LVDS input side, the driver
>>> supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping.
>>>
>>> Product link:
>>> https://www.ite.com.tw/en/product/cate1/IT6263
>>>
>>> Signed-off-by: Liu Ying <victor.liu@....com>
>>> ---
>>> drivers/gpu/drm/bridge/Kconfig | 8 +
>>> drivers/gpu/drm/bridge/Makefile | 1 +
>>> drivers/gpu/drm/bridge/ite-it6263.c | 829
>>> ++++++++++++++++++++++++++++
>>> 3 files changed, 838 insertions(+)
>>> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c
>>>
>>> diff --git a/drivers/gpu/drm/bridge/Kconfig
>>> b/drivers/gpu/drm/bridge/Kconfig index
>>> 3eb955333c80..93f99682a090 100644
>>> --- a/drivers/gpu/drm/bridge/Kconfig
>>> +++ b/drivers/gpu/drm/bridge/Kconfig
>>> @@ -90,6 +90,14 @@ config DRM_FSL_LDB
>>> help
>>> Support for i.MX8MP DPI-to-LVDS on-SoC encoder.
>>>
>>> +config DRM_ITE_IT6263
>>> + tristate "ITE IT6263 LVDS/HDMI bridge"
>>> + depends on OF
>>> + select DRM_KMS_HELPER
>>> + select REGMAP_I2C
>>> + help
>>> + ITE IT6263 LVDS to HDMI bridge chip driver.
>>> +
>>> config DRM_ITE_IT6505
>>> tristate "ITE IT6505 DisplayPort bridge"
>>> depends on OF
>>> diff --git a/drivers/gpu/drm/bridge/Makefile
>>> b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd
>>> 100644
>>> --- a/drivers/gpu/drm/bridge/Makefile
>>> +++ b/drivers/gpu/drm/bridge/Makefile
>>> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
>>> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
>>> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
>>> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o
>>> +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o
>>> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o
>>> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o
>>> obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git
>>> a/drivers/gpu/drm/bridge/ite-it6263.c
>>> b/drivers/gpu/drm/bridge/ite-it6263.c
>>> new file mode 100644
>>> index 000000000000..886588497bc1
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/bridge/ite-it6263.c
>>> @@ -0,0 +1,829 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Copyright 2024 NXP
>>> + */
>>> +
>>> +#include <linux/bitfield.h>
>>> +#include <linux/bits.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/gpio/consumer.h>
>>> +#include <linux/i2c.h>
>>> +#include <linux/media-bus-format.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/regmap.h>
>>> +#include <linux/regulator/consumer.h>
>>> +
>>> +#include <drm/drm_atomic.h>
>>> +#include <drm/drm_atomic_helper.h>
>>> +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h>
>>> +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include
>>> +<drm/drm_edid.h> #include <drm/drm_of.h> #include
>>> +<drm/drm_probe_helper.h>
>>> +
>>> +/*
>>> +---------------------------------------------------------------------
>>> +--
>>> +------
>>> + * LVDS registers
>>> + */
>>> +
>>> +/* LVDS software reset registers */
>>> +#define LVDS_REG_05 0x05
>>> +#define REG_SOFT_P_RST BIT(1)
>>> +
>>> +/* LVDS system configuration registers */
>>> +/* 0x0b */
>>> +#define LVDS_REG_0B 0x0b
>>> +#define REG_SSC_PCLK_RF BIT(0)
>>> +#define REG_LVDS_IN_SWAP BIT(1)
>>> +
>>> +/* LVDS test pattern gen control registers */
>>> +/* 0x2c */
>>> +#define LVDS_REG_2C 0x2c
>>> +#define REG_COL_DEP GENMASK(1, 0)
>>> +#define BIT8 FIELD_PREP(REG_COL_DEP, 2)
>>> +#define OUT_MAP BIT(4)
>>> +#define JEIDA 0
>>> +#define REG_DESSC_ENB BIT(6)
>>> +#define DMODE BIT(7)
>>> +#define DISO BIT(7)
>>> +#define SISO 0
>>> +
>>> +#define LVDS_REG_3C 0x3c
>>> +#define LVDS_REG_3F 0x3f
>>> +#define LVDS_REG_47 0x47
>>> +#define LVDS_REG_48 0x48
>>> +#define LVDS_REG_4F 0x4f
>>> +#define LVDS_REG_52 0x52
>>> +
>>> +/*
>>> +---------------------------------------------------------------------
>>> +--
>>> +------
>>> + * HDMI registers are separated into three banks:
>>> + * 1) HDMI register common bank: 0x00 ~ 0x2f */
>>> +
>>> +/* HDMI genernal registers */
>>> +#define HDMI_REG_SW_RST 0x04
>>> +#define SOFTREF_RST BIT(5)
>>> +#define SOFTA_RST BIT(4)
>>> +#define SOFTV_RST BIT(3)
>>> +#define AUD_RST BIT(2)
>>> +#define HDCP_RST BIT(0)
>>> +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \
>>> + AUD_RST | HDCP_RST)
>>> +
>>> +#define HDMI_REG_SYS_STATUS 0x0e
>>> +#define HPDETECT BIT(6)
>>> +#define TXVIDSTABLE BIT(4)
>>> +
>>> +#define HDMI_REG_BANK_CTRL 0x0f
>>> +#define REG_BANK_SEL BIT(0)
>>> +
>>> +/* HDMI System DDC control registers */
>>> +#define HDMI_REG_DDC_MASTER_CTRL 0x10
>>> +#define MASTER_SEL_HOST BIT(0)
>>> +
>>> +#define HDMI_REG_DDC_HEADER 0x11
>>> +
>>> +#define HDMI_REG_DDC_REQOFF 0x12
>>> +#define HDMI_REG_DDC_REQCOUNT 0x13
>>> +#define HDMI_REG_DDC_EDIDSEG 0x14
>>> +
>>> +#define HDMI_REG_DDC_CMD 0x15
>>> +#define DDC_CMD_EDID_READ 0x3
>>> +#define DDC_CMD_FIFO_CLR 0x9
>>> +
>>> +#define HDMI_REG_DDC_STATUS 0x16
>>> +#define DDC_DONE BIT(7)
>>> +#define DDC_NOACK BIT(5)
>>> +#define DDC_WAITBUS BIT(4)
>>> +#define DDC_ARBILOSE BIT(3)
>>> +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE)
>>> +
>>> +#define HDMI_DDC_FIFO_BYTES 32
>>> +#define HDMI_REG_DDC_READFIFO 0x17
>>> +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */
>>> +#define HDMI_REG_LVDS_PORT_EN 0x1e
>>> +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33
>>> +
>>> +/*
>>> +---------------------------------------------------------------------
>>> +--
>>> +------
>>> + * 2) HDMI register bank0: 0x30 ~ 0xff */
>>> +
>>> +/* HDMI AFE registers */
>>> +#define HDMI_REG_AFE_DRV_CTRL 0x61
>>> +#define AFE_DRV_PWD BIT(5)
>>> +#define AFE_DRV_RST BIT(4)
>>> +
>>> +#define HDMI_REG_AFE_XP_CTRL 0x62
>>> +#define AFE_XP_GAINBIT BIT(7)
>>> +#define AFE_XP_ER0 BIT(4)
>>> +#define AFE_XP_RESETB BIT(3)
>>> +
>>> +#define HDMI_REG_AFE_ISW_CTRL 0x63
>>> +
>>> +#define HDMI_REG_AFE_IP_CTRL 0x64
>>> +#define AFE_IP_GAINBIT BIT(7)
>>> +#define AFE_IP_ER0 BIT(3)
>>> +#define AFE_IP_RESETB BIT(2)
>>> +
>>> +/* HDMI input data format registers */
>>> +#define HDMI_REG_INPUT_MODE 0x70
>>> +#define IN_RGB 0x00
>>> +
>>> +/* HDMI general control registers */
>>> +#define HDMI_REG_HDMI_MODE 0xc0
>>> +#define TX_HDMI_MODE BIT(0)
>>> +
>>> +#define HDMI_REG_GCP 0xc1
>>> +#define AVMUTE BIT(0)
>>> +#define HDMI_COLOR_DEPTH GENMASK(6, 4)
>>> +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4)
>>> +
>>> +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6
>>> +#define ENABLE_PKT BIT(0)
>>> +#define REPEAT_PKT BIT(1)
>>> +
>>> +/*
>>> +---------------------------------------------------------------------
>>> +--
>>> +------
>>> + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */
>>> +
>>> +/* AVI packet registers */
>>> +#define HDMI_REG_AVI_DB1 0x158
>>> +#define AVI_DB1_COLOR_SPACE GENMASK(6, 5)
>>> +#define AVI_COLOR_SPACE_RGB FIELD_PREP(AVI_DB1_COLOR_SPACE, 0)
>>> +
>>> +#define MAX_PIXEL_CLOCK_KHZ 150000
>>> +#define HIGH_PIXEL_CLOCK_KHZ 80000
>>> +
>>> +struct it6263 {
>>> + struct device *dev;
>>> + struct i2c_client *hdmi_i2c;
>>> + struct i2c_client *lvds_i2c;
>>> + struct regmap *hdmi_regmap;
>>> + struct regmap *lvds_regmap;
>>> + struct drm_bridge bridge;
>>> + struct drm_bridge *next_bridge;
>>> + struct drm_connector connector;
>>> + struct gpio_desc *reset_gpio;
>>> + bool lvds_dual_link;
>>> + bool lvds_link12_swap;
>>> +};
>>> +
>>> +static inline struct it6263 *bridge_to_it6263(struct drm_bridge
>>> +*bridge) {
>>> + return container_of(bridge, struct it6263, bridge); }
>>> +
>>> +static inline struct it6263 *connector_to_it6263(struct drm_connector
>>> +*conn) {
>>> + return container_of(conn, struct it6263, connector); }
>>> +
>>> +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned
>>> +int
>>> +reg) {
>>> + switch (reg) {
>>> + case HDMI_REG_SW_RST:
>>> + case HDMI_REG_BANK_CTRL:
>>> + case HDMI_REG_DDC_MASTER_CTRL:
>>> + case HDMI_REG_DDC_HEADER:
>>> + case HDMI_REG_DDC_REQOFF:
>>> + case HDMI_REG_DDC_REQCOUNT:
>>> + case HDMI_REG_DDC_EDIDSEG:
>>> + case HDMI_REG_DDC_CMD:
>>> + case HDMI_REG_LVDS_PORT:
>>> + case HDMI_REG_LVDS_PORT_EN:
>>> + case HDMI_REG_AFE_DRV_CTRL:
>>> + case HDMI_REG_AFE_XP_CTRL:
>>> + case HDMI_REG_AFE_ISW_CTRL:
>>> + case HDMI_REG_AFE_IP_CTRL:
>>> + case HDMI_REG_INPUT_MODE:
>>> + case HDMI_REG_HDMI_MODE:
>>> + case HDMI_REG_GCP:
>>> + case HDMI_REG_PKT_GENERAL_CTRL:
>>> + case HDMI_REG_AVI_DB1:
>>> + return true;
>>> + default:
>>> + return false;
>>> + }
>>> +}
>>> +
>>> +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int
>>> +reg) {
>>> + if (it6263_hdmi_writeable_reg(dev, reg))
>>> + return true;
>>> +
>>> + switch (reg) {
>>> + case HDMI_REG_SYS_STATUS:
>>> + case HDMI_REG_DDC_STATUS:
>>> + case HDMI_REG_DDC_READFIFO:
>>> + return true;
>>> + default:
>>> + return false;
>>> + }
>>> +}
>>> +
>>> +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int
>>> +reg) {
>>> + switch (reg) {
>>> + case HDMI_REG_SW_RST:
>>> + case HDMI_REG_SYS_STATUS:
>>> + case HDMI_REG_DDC_STATUS:
>>> + case HDMI_REG_DDC_READFIFO:
>>> + return true;
>>> + default:
>>> + return false;
>>> + }
>>> +}
>>> +
>>> +static const struct regmap_range_cfg it6263_hdmi_range_cfg = {
>>> + .range_min = 0x00,
>>> + .range_max = HDMI_REG_AVI_DB1,
>>> + .selector_reg = HDMI_REG_BANK_CTRL,
>>> + .selector_mask = REG_BANK_SEL,
>>> + .selector_shift = 0,
>>> + .window_start = 0x00,
>>> + .window_len = 0x100,
>>> +};
>>> +
>>> +static const struct regmap_config it6263_hdmi_regmap_config = {
>>> + .name = "it6263-hdmi",
>>> + .reg_bits = 8,
>>> + .val_bits = 8,
>>> + .writeable_reg = it6263_hdmi_writeable_reg,
>>> + .readable_reg = it6263_hdmi_readable_reg,
>>> + .volatile_reg = it6263_hdmi_volatile_reg,
>>> + .max_register = HDMI_REG_AVI_DB1,
>>> + .ranges = &it6263_hdmi_range_cfg,
>>> + .num_ranges = 1,
>>> + .cache_type = REGCACHE_MAPLE,
>>> +};
>>> +
>>> +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned
>>> +int
>>> +reg) {
>>> + switch (reg) {
>>> + case LVDS_REG_05:
>>> + case LVDS_REG_0B:
>>> + case LVDS_REG_2C:
>>> + case LVDS_REG_3C:
>>> + case LVDS_REG_3F:
>>> + case LVDS_REG_47:
>>> + case LVDS_REG_48:
>>> + case LVDS_REG_4F:
>>> + case LVDS_REG_52:
>>> + return true;
>>> + default:
>>> + return false;
>>> + }
>>> +}
>>> +
>>> +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int
>>> +reg) {
>>> + return it6263_lvds_writeable_reg(dev, reg); }
>>> +
>>> +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int
>>> +reg) {
>>> + return reg == LVDS_REG_05;
>>> +}
>>> +
>>> +static const struct regmap_config it6263_lvds_regmap_config = {
>>> + .name = "it6263-lvds",
>>> + .reg_bits = 8,
>>> + .val_bits = 8,
>>> + .writeable_reg = it6263_lvds_writeable_reg,
>>> + .readable_reg = it6263_lvds_readable_reg,
>>> + .volatile_reg = it6263_lvds_volatile_reg,
>>> + .max_register = LVDS_REG_52,
>>> + .cache_type = REGCACHE_MAPLE,
>>> +};
>>> +
>>> +static const char * const it6263_supplies[] = {
>>> + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2",
>>> + "avcc", "anvdd", "apvdd"
>>> +};
>>> +
>>> +static int it6263_parse_dt(struct it6263 *it) {
>>> + struct device *dev = it->dev;
>>> + struct device_node *port0, *port1;
>>> + int ret = 0;
>>> +
>>> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0);
>>> + if (IS_ERR(it->next_bridge))
>>> + return dev_err_probe(dev, PTR_ERR(it->next_bridge),
>>> + "failed to get next bridge\n");
>>> +
>>> + port0 = of_graph_get_port_by_id(dev->of_node, 0);
>>> + port1 = of_graph_get_port_by_id(dev->of_node, 1);
>>> + if (port0 && port1) {
>>> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") &&
>>> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) {
>>> + it->lvds_dual_link = true;
>>> + it->lvds_link12_swap = true;
>>> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") &&
>>> + of_property_read_bool(port1, "dual-lvds-even-pixels")) {
>>> + it->lvds_dual_link = true;
>>> + }
>>> +
>>> + if (!it->lvds_dual_link) {
>>> + dev_err(dev,
>>> + "failed to get LVDS dual link pixel order\n");
>>> + ret = -EINVAL;
>>> + }
>>> + } else if (port1) {
>>> + ret = -EINVAL;
>>> + dev_err(dev, "single input LVDS port1 is not supported\n");
>>
>> Are you supporting single input LVDS port0??
>>
>>> + } else if (!port0) {
>>> + ret = -EINVAL;
>>> + dev_err(dev, "no input LVDS port\n");
>>> + }
>>> +
>>> + of_node_put(port0);
>>> + of_node_put(port1);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static inline void it6263_reset(struct it6263 *it) {
>>> + if (!it->reset_gpio)
>>> + return;
>>> +
>>> + gpiod_set_value_cansleep(it->reset_gpio, 0);
>>> + fsleep(1000);
>>> + gpiod_set_value_cansleep(it->reset_gpio, 1);
>>> + /* The chip maker says the low pulse should be at least 40ms. */
>>> + fsleep(40000);
>>> + gpiod_set_value_cansleep(it->reset_gpio, 0);
>>> + /* addtional time to wait the high voltage to be stable */
>>> + fsleep(5000);
>>
>> What about other resets ??
>>
>> /* AFE PLL reset and pclk reset */
>>
>>> +}
>>> +
>>> +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) {
>>> + int ret;
>>> +
>>> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT,
>>> + LVDS_INPUT_CTRL_I2C_ADDR << 1);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0));
>>> +}
>>> +
>>> +static inline void it6263_lvds_reset(struct it6263 *it) {
>>> + /* AFE PLL reset */
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0);
>>> + fsleep(1000);
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0));
>>> +
>>> + /* software pixel clock domain reset */
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST,
>>> + REG_SOFT_P_RST);
>>> + fsleep(1000);
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0);
>>> + fsleep(10000);
>>> +}
>>> +
>>> +static inline void it6263_lvds_set_interface(struct it6263 *it) {
>>> + /* color depth */
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8);
>>> + /* output mapping */
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA);
>>> +
>>> + if (it->lvds_dual_link) {
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO);
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1));
>>> + } else {
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO);
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0);
>>> + }
>>> +}
>>> +
>>> +static inline void it6263_lvds_set_afe(struct it6263 *it) {
>>> + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa);
>>> + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02);
>>> + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa);
>>> + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02);
>>> + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11);
>>> +
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF,
>>> + REG_SSC_PCLK_RF);
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0);
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB,
>>> + REG_DESSC_ENB);
>>> +}
>>> +
>>> +static inline void it6263_lvds_sys_cfg(struct it6263 *it) {
>>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP,
>>> + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); }
>>> +
>>> +static inline void it6263_lvds_config(struct it6263 *it) {
>>> + it6263_lvds_reset(it);
>>> + it6263_lvds_set_interface(it);
>>> + it6263_lvds_set_afe(it);
>>> + it6263_lvds_sys_cfg(it);
>>> +}
>>> +
>>> +static inline void it6263_hdmi_config(struct it6263 *it) {
>>> + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL);
>>> + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB);
>>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH,
>>> + HDMI_COLOR_DEPTH_24);
>>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_AVI_DB1,
>>> + AVI_DB1_COLOR_SPACE, AVI_COLOR_SPACE_RGB); }
>>> +
>>> +static enum drm_connector_status it6263_detect(struct it6263 *it) {
>>> + unsigned int val;
>>> +
>>> + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val);
>>> + if (val & HPDETECT)
>>> + return connector_status_connected;
>>> + else
>>> + return connector_status_disconnected; }
>>> +
>>> +static enum drm_connector_status
>>> +it6263_connector_detect(struct drm_connector *connector, bool force) {
>>> + struct it6263 *it = connector_to_it6263(connector);
>>> +
>>> + return it6263_detect(it);
>>> +}
>>> +
>>> +static const struct drm_connector_funcs it6263_connector_funcs = {
>>> + .detect = it6263_connector_detect,
>>> + .fill_modes = drm_helper_probe_single_connector_modes,
>>> + .destroy = drm_connector_cleanup,
>>> + .reset = drm_atomic_helper_connector_reset,
>>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>>> +};
>>> +
>>> +static int it6263_read_edid(void *data, u8 *buf, unsigned int block,
>>> +size_t len) {
>>> + struct it6263 *it = data;
>>> + struct regmap *regmap = it->hdmi_regmap;
>>> + unsigned int start = (block % 2) * EDID_LENGTH;
>>> + unsigned int segment = block >> 1;
>>> + unsigned int count, val;
>>> + int ret;
>>> +
>>> + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST);
>>> + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1);
>>> + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment);
>>> +
>>> + while (len) {
>>> + /* clear DDC FIFO */
>>> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR);
>>> +
>>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS,
>>> + val, val & DDC_DONE,
>>> + 2000, 10000);
>>> + if (ret) {
>>> + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len;
>>> +
>>> + /* fire the read command */
>>> + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start);
>>> + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count);
>>> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ);
>>> +
>>> + start += count;
>>> + len -= count;
>>> +
>>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val,
>>> + val & (DDC_DONE | DDC_ERROR),
>>> + 20000, 250000);
>>> + if (ret && !(val & DDC_ERROR)) {
>>> + dev_err(it->dev, "failed to read EDID:%d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + if (val & DDC_ERROR) {
>>> + dev_err(it->dev, "DDC error\n");
>>> + return -EIO;
>>> + }
>>> +
>>> + /* cache to buffer */
>>> + for (; count > 0; count--) {
>>> + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val);
>>> + *(buf++) = val;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int it6263_connector_get_modes(struct drm_connector
>>> +*connector) {
>>> + struct it6263 *it = connector_to_it6263(connector);
>>> + const struct drm_edid *drm_edid;
>>> + int count;
>>> +
>>> + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it);
>>> +
>>> + drm_edid_connector_update(connector, drm_edid);
>>> + count = drm_edid_connector_add_modes(connector);
>>> +
>>> + drm_edid_free(drm_edid);
>>> +
>>> + return count;
>>> +}
>>> +
>>> +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = {
>>> + .get_modes = it6263_connector_get_modes, };
>>> +
>>> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge,
>>> + struct drm_bridge_state *bridge_state,
>>> + struct drm_crtc_state *crtc_state,
>>> + struct drm_connector_state *conn_state) {
>>> + struct drm_display_mode *mode = &crtc_state->adjusted_mode;
>>> +
>>> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; }
>>> +
>>> +static void
>>> +it6263_bridge_atomic_disable(struct drm_bridge *bridge,
>>> + struct drm_bridge_state *old_bridge_state) {
>>> + struct it6263 *it = bridge_to_it6263(bridge);
>>> +
>>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE);
>>> + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0);
>>> + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL,
>>> + AFE_DRV_RST | AFE_DRV_PWD);
>>> +}
>>> +
>>> +static void
>>> +it6263_bridge_atomic_enable(struct drm_bridge *bridge,
>>> + struct drm_bridge_state *old_bridge_state) {
>>> + struct drm_atomic_state *state = old_bridge_state->base.state;
>>> + struct it6263 *it = bridge_to_it6263(bridge);
>>> + const struct drm_crtc_state *crtc_state;
>>> + struct regmap *regmap = it->hdmi_regmap;
>>> + const struct drm_display_mode *mode;
>>> + struct drm_connector *connector;
>>> + bool is_stable = false;
>>> + struct drm_crtc *crtc;
>>> + unsigned int val;
>>> + bool pclk_high;
>>> + int i, ret;
>>> +
>>> + connector = drm_atomic_get_new_connector_for_encoder(state,
>>> + bridge->encoder);
>>> + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
>>> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
>>> + mode = &crtc_state->adjusted_mode;
>>> +
>>> + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE);
>>> +
>>> + /* HDMI AFE setup */
>>> + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false;
>>> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST);
>>> + if (pclk_high)
>>> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL,
>>> + AFE_XP_GAINBIT | AFE_XP_RESETB);
>>> + else
>>> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL,
>>> + AFE_XP_ER0 | AFE_XP_RESETB);
>>> + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10);
>>> + if (pclk_high)
>>> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL,
>>> + AFE_IP_GAINBIT | AFE_IP_RESETB);
>>> + else
>>> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL,
>>> + AFE_IP_ER0 | AFE_IP_RESETB);
>>> +
>>> + /* HDMI software video reset */
>>> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST);
>>> + fsleep(1000);
>>> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0);
>>> +
>>> + /* reconfigure LVDS and retry several times in case video is instable */
>>> + for (i = 0; i < 3; i++) {
>>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val,
>>> + val & TXVIDSTABLE,
>>> + 20000, 500000);
>>> + if (!ret) {
>>> + is_stable = true;
>>> + break;
>>> + }
>>> +
>>> + it6263_lvds_config(it);
>>> + }
>>> +
>>> + if (!is_stable)
>>> + dev_warn(it->dev, "failed to wait for video stable\n");
>>> +
>>> + /* HDMI AFE reset release and power up */
>>> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0);
>>> +
>>> + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0);
>>> +
>>> + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT |
>>> +REPEAT_PKT); }
>>> +
>>> +static enum drm_mode_status
>>> +it6263_bridge_mode_valid(struct drm_bridge *bridge,
>>> + const struct drm_display_info *info,
>>> + const struct drm_display_mode *mode) {
>>> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH :
>>> +MODE_OK; }
>>> +
>>> +static int it6263_bridge_attach(struct drm_bridge *bridge,
>>> + enum drm_bridge_attach_flags flags) {
>>> + struct it6263 *it = bridge_to_it6263(bridge);
>>> + int ret;
>>> +
>>> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge,
>>> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
>>> + return 0;
>>> +
>>> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT |
>>> + DRM_CONNECTOR_POLL_DISCONNECT;
>>> +
>>> + ret = drm_connector_init(bridge->dev, &it->connector,
>>> + &it6263_connector_funcs,
>>> + DRM_MODE_CONNECTOR_HDMIA);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + drm_connector_helper_add(&it->connector,
>>> + &it6263_connector_helper_funcs);
>>> + drm_connector_attach_encoder(&it->connector, bridge->encoder);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static enum drm_connector_status it6263_bridge_detect(struct
>>> +drm_bridge
>>> +*bridge) {
>>> + struct it6263 *it = bridge_to_it6263(bridge);
>>> +
>>> + return it6263_detect(it);
>>> +}
>>> +
>>> +static const struct drm_edid *
>>> +it6263_bridge_edid_read(struct drm_bridge *bridge,
>>> + struct drm_connector *connector)
>>> +{
>>> + struct it6263 *it = bridge_to_it6263(bridge);
>>> +
>>> + return drm_edid_read_custom(connector, it6263_read_edid, it); }
>>> +
>>> +static u32 *
>>> +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
>>> + struct drm_bridge_state *bridge_state,
>>> + struct drm_crtc_state *crtc_state,
>>> + struct drm_connector_state *conn_state,
>>> + u32 output_fmt,
>>> + unsigned int *num_input_fmts)
>>> +{
>>> + u32 *input_fmts;
>>> +
>>> + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
>>> + if (!input_fmts) {
>>> + *num_input_fmts = 0;
>>> + return NULL;
>>> + }
>>> +
>>> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA;
>>
>> Why is it hardcoded? What about supporting VESA??
>>
>>> + *num_input_fmts = 1;
>>> +
>>> + return input_fmts;
>>> +}
>>> +
>>> +static const struct drm_bridge_funcs it6263_bridge_funcs = {
>>> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
>>> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
>>> + .atomic_reset = drm_atomic_helper_bridge_reset,
>>> + .attach = it6263_bridge_attach,
>>> + .mode_valid = it6263_bridge_mode_valid,
>>> + .atomic_disable = it6263_bridge_atomic_disable,
>>> + .atomic_enable = it6263_bridge_atomic_enable,
>>> + .atomic_check = it6263_bridge_atomic_check,
>>> + .detect = it6263_bridge_detect,
>>> + .edid_read = it6263_bridge_edid_read,
>>> + .atomic_get_input_bus_fmts =
>>> +it6263_bridge_atomic_get_input_bus_fmts,
>>> +};
>
> Like [1]
> static const struct drm_bridge_funcs it6263_bridge_funcs = {
> .attach = it6263_bridge_attach,
> .mode_set = it6263_bridge_mode_set,
> .disable = it6263_bridge_disable,
> .enable = it6263_bridge_enable,
> .get_edid = it6263_bridge_get_edid,
> .detect = it6263_bridge_detect,
> };
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c?h=v6.12-rc1#n998
>
> Is it not sufficient for your use case??
If we decide to document the LVDS data mapping in dt-binding,
then it is practically ok to use the non-atomic callbacks like
the adv7511 driver, otherwise, the atomic callbacks are required
due to the bus format negotiation.
>
> Cheers,
> Biju
>
>>> +
>>> +static int it6263_probe(struct i2c_client *client) {
>>> + struct device *dev = &client->dev;
>>> + struct it6263 *it;
>>> + int ret;
>>> +
>>> + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL);
>>> + if (!it)
>>> + return -ENOMEM;
>>> +
>>> + it->dev = dev;
>>> + it->hdmi_i2c = client;
>>> +
>>> + it->hdmi_regmap = devm_regmap_init_i2c(client,
>>> + &it6263_hdmi_regmap_config);
>>> + if (IS_ERR(it->hdmi_regmap))
>>> + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap),
>>> + "failed to init I2C regmap for HDMI\n");
>>> +
>>> + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
>>> + if (IS_ERR(it->reset_gpio))
>>> + return dev_err_probe(dev, PTR_ERR(it->reset_gpio),
>>> + "failed to get reset gpio\n");
>>> +
>>> + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies),
>>> + it6263_supplies);
>>> + if (ret)
>>> + return dev_err_probe(dev, ret, "failed to get power supplies\n");
>>> +
>>> + ret = it6263_parse_dt(it);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + it6263_reset(it);
>>> +
>>> + ret = it6263_lvds_set_i2c_addr(it);
>>> + if (ret)
>>> + return dev_err_probe(dev, ret, "failed to set I2C addr\n");
>>> +
>>> + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter,
>>> + LVDS_INPUT_CTRL_I2C_ADDR);
>>> + if (IS_ERR(it->lvds_i2c))
>>> + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c),
>>> + "failed to allocate I2C device for LVDS\n");
>>
>> Maybe use action_or_reset and call i2c_unregister_device();
>>
>>> +
>>> + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c,
>>> + &it6263_lvds_regmap_config);
>>> + if (IS_ERR(it->lvds_regmap))
>>> + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap),
>>> + "failed to init I2C regmap for LVDS\n");
>>
>>> +
>>> + it6263_lvds_config(it);
>>> + it6263_hdmi_config(it);
>>
>>> +
>>> + i2c_set_clientdata(client, it);
>>> +
>>> + it->bridge.funcs = &it6263_bridge_funcs;
>>> + it->bridge.of_node = dev->of_node;
>>> + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
>>
>> it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; ??
>>
>>> + drm_bridge_add(&it->bridge);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void it6263_remove(struct i2c_client *client) {
>>> + struct it6263 *it = i2c_get_clientdata(client);
>>> +
>>> + drm_bridge_remove(&it->bridge);
>>
>>> +}
>>> +
>>> +static const struct of_device_id it6263_of_match[] = {
>>> + { .compatible = "ite,it6263", },
>>> + { }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, it6263_of_match);
>>> +
>>> +static const struct i2c_device_id it6263_i2c_ids[] = {
>>> + { "it6263", 0 },
>>> + { }
>>> +};
>>> +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids);
>>> +
>>> +static struct i2c_driver it6263_driver = {
>>> + .probe = it6263_probe,
>>> + .remove = it6263_remove,
>>> + .driver = {
>>> + .name = "it6263",
>>> + .of_match_table = it6263_of_match,
>>> + },
>>> + .id_table = it6263_i2c_ids,
>>> +};
>>> +module_i2c_driver(it6263_driver);
>>> +
>>> +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge");
>>> +MODULE_AUTHOR("Liu Ying <victor.liu@....com>");
>>> +MODULE_LICENSE("GPL");
>>> --
>>> 2.34.1
>>>
>
--
Regards,
Liu Ying
Powered by blists - more mailing lists