[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0c304de2-26c6-49b3-9809-bf1e7619e5b8@kernel.org>
Date: Tue, 15 Oct 2024 15:31:37 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Jyothi Kumar Seerapu <quic_jseerapu@...cinc.com>,
Vinod Koul <vkoul@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Andi Shyti <andi.shyti@...nel.org>,
Sumit Semwal <sumit.semwal@...aro.org>,
Christian König <christian.koenig@....com>
Cc: cros-qcom-dts-watchers@...omium.org, linux-arm-msm@...r.kernel.org,
dmaengine@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-media@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linaro-mm-sig@...ts.linaro.org, quic_msavaliy@...cinc.com,
quic_vtanuku@...cinc.com
Subject: Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional
arg to dma-cell property
On 15/10/2024 14:07, Jyothi Kumar Seerapu wrote:
> When high performance with multiple i2c messages in a single transfer
> is required, employ Block Event Interrupt (BEI) to trigger interrupts
> after specific messages transfer and the last message transfer,
> thereby reducing interrupts.
>
> For each i2c message transfer, a series of Transfer Request Elements(TREs)
> must be programmed, including config tre for frequency configuration,
> go tre for holding i2c address and dma tre for holding dma buffer address,
> length as per the hardware programming guide. For transfer using BEI,
> multiple I2C messages may necessitate the preparation of config, go,
> and tx DMA TREs. However, a channel TRE size of 64 is often insufficient,
> potentially leading to failures due to inadequate memory space.
Please kindly test the patches before you sent them. Upstream is not a
testing service.
Best regards,
Krzysztof
Powered by blists - more mailing lists