[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241015192905.28969-2-cenk.uluisik@googlemail.com>
Date: Tue, 15 Oct 2024 21:28:36 +0200
From: Cenk Uluisik <cenk.uluisik@...glemail.com>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>,
Chris Morgan <macromorgan@...mail.com>,
Jonas Karlman <jonas@...boo.se>,
Andy Yan <andyshrk@....com>,
Tim Lunn <tim@...thertop.org>,
Jagan Teki <jagan@...eble.ai>,
Dragan Simic <dsimic@...jaro.org>,
Michael Riesch <michael.riesch@...fvision.net>,
Jimmy Hon <honyuenkwun@...il.com>,
Jing Luo <jing@...g.rocks>,
Cenk Uluisik <cenk.uluisik@...glemail.com>,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v6 2/2] arm64: dts: rockchip: Add rk3588-orangepi-5b device tree and refactor
Implements a slightly modified rk3588s-orangepi-5b.dts from the vendor.
Unfortunately the &wireless_bluetooth and &wireless_wlan are not
implemented yet.
Bigger parts of the rk3588s-orangepi-5.dts file were moved into a new
rk3588s-orangepi-5.dtsi file, so that both device trees from the
orangepi-5 and 5b include from it and avoid including from the .dts.
This changes the Orange Pi 5's sdmmc alias to be mmc1, breaking existing
users if they used the /dev/mmc0 device file, so it's consistent with all
the other rk3588 DTS, which, is also the new default that rockchip wants
to use.
https://github.com/orangepi-xunlong/linux-orangepi/commit/
bce92d16b230b8e93c2831fb7768839fd7bbab04
Therefore add the sdhc alias to be mmc0 on the rk3588s-orangepi-5b.dts.
The "enable-active-low" warning is addressed here:
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/
commit/?h=v6.12-armsoc/dtsfixes&id=f4d29bebaa6118c1e51e8f1c21ce2b34f43e1479
The "leds-gpio" warning was already there because the DTS checking script
might not like the ID, which is probably avoidable by renaming it, but this
will be addressed in a seperate issue.
How does this board differ from the original Orange Pi 5?
- the Orange Pi 5 has a M.2 NVMe M-key PCI 2.0x1
slot (hooked to combphy0_ps) whereas the Orange Pi 5b uses combphy0_ps
for the WiFi.
- The Orange Pi 5 with the M.2 socket has a regulator defined hooked to
"GPIO0_C5" (i.e. PCIE_PWREN_H) whereas the Orange Pi 5B has GPIO0_C5
hooked to BT_WAKE_HOST.
- builtin eMMC storage
- no SPI NOR flash (u-boot, preboot etc. initiates
from within the eMMC
storage)
- ap6275p Wifi module (like the Orange Pi 5 Plus)
- builtin BlueTooth module
Signed-off-by: Cenk Uluisik <cenk.uluisik@...glemail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588s-orangepi-5.dts | 798 +-----------------
...orangepi-5.dts => rk3588s-orangepi-5.dtsi} | 36 +-
.../boot/dts/rockchip/rk3588s-orangepi-5b.dts | 18 +
4 files changed, 64 insertions(+), 789 deletions(-)
rewrite arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts (95%)
copy arch/arm64/boot/dts/rockchip/{rk3588s-orangepi-5.dts => rk3588s-orangepi-5.dtsi} (96%)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 09423070c992..45249ce15175 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -154,3 +154,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
dissimilarity index 95%
index feea6b20a6bf..9c0d1348281b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -1,766 +1,32 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/usb/pd.h>
-#include "rk3588s.dtsi"
-
-/ {
- model = "Xunlong Orange Pi 5";
- compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
-
- aliases {
- ethernet0 = &gmac1;
- mmc0 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <100>;
-
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <1800>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_gpio>;
-
- led-1 {
- gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
- label = "status_led";
- linux,default-trigger = "heartbeat";
- };
- };
-
- vbus_typec: vbus-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&typec5v_pwren>;
- regulator-name = "vbus_typec";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_sys: vcc5v0-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
- compatible = "regulator-fixed";
- enable-active-low;
- gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
- regulator-name = "vcc_3v3_sd_s0";
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3_s3>;
- };
-
- vcc3v3_pcie20: vcc3v3-pcie20-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
- regulator-name = "vcc3v3_pcie20";
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- startup-delay-us = <50000>;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&combphy0_ps {
- status = "okay";
-};
-
-&combphy2_psu {
- status = "okay";
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
- cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
- cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&gmac1 {
- clock_in_out = "output";
- phy-handle = <&rgmii_phy1>;
- phy-mode = "rgmii-rxid";
- pinctrl-0 = <&gmac1_miim
- &gmac1_tx_bus2
- &gmac1_rx_bus2
- &gmac1_rgmii_clk
- &gmac1_rgmii_bus>;
- pinctrl-names = "default";
- tx_delay = <0x42>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu_s0>;
- status = "okay";
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0m2_xfer>;
- status = "okay";
-
- vdd_cpu_big0_s0: regulator@42 {
- compatible = "rockchip,rk8602";
- reg = <0x42>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big0_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1050000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_big1_s0: regulator@43 {
- compatible = "rockchip,rk8603", "rockchip,rk8602";
- reg = <0x43>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big1_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1050000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c2 {
- status = "okay";
-
- vdd_npu_s0: regulator@42 {
- compatible = "rockchip,rk8602";
- reg = <0x42>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_npu_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c6 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6m3_xfer>;
- status = "okay";
-
- usbc0: usb-typec@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&usbc0_int>;
- vbus-supply = <&vbus_typec>;
- status = "okay";
-
- usb_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- data-role = "dual";
- op-sink-microwatt = <1000000>;
- power-role = "dual";
- sink-pdos =
- <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
- source-pdos =
- <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- try-power-role = "source";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- usbc0_hs: endpoint {
- remote-endpoint = <&usb_host0_xhci_drd_sw>;
- };
- };
-
- port@1 {
- reg = <1>;
- usbc0_ss: endpoint {
- remote-endpoint = <&usbdp_phy0_typec_ss>;
- };
- };
-
- port@2 {
- reg = <2>;
- usbc0_sbu: endpoint {
- remote-endpoint = <&usbdp_phy0_typec_sbu>;
- };
- };
- };
- };
- };
-
- hym8563: rtc@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
- wakeup-source;
- };
-};
-
-&mdio1 {
- rgmii_phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x1>;
- reset-assert-us = <20000>;
- reset-deassert-us = <100000>;
- reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-};
-
-&pcie2x1l2 {
- reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie20>;
- status = "okay";
-};
-
-&pinctrl {
- gpio-func {
- leds_gpio: leds-gpio {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb-typec {
- usbc0_int: usbc0-int {
- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- typec5v_pwren: typec5v-pwren {
- rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&saradc {
- vref-supply = <&avcc_1v8_s0>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- disable-wp;
- max-frequency = <150000000>;
- no-mmc;
- no-sdio;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc_3v3_sd_s0>;
- vqmmc-supply = <&vccio_sd_s0>;
- status = "okay";
-};
-
-&sfc {
- pinctrl-names = "default";
- pinctrl-0 = <&fspim0_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <100000000>;
- spi-rx-bus-width = <4>;
- spi-tx-bus-width = <1>;
- };
-};
-
-&spi2 {
- status = "okay";
- assigned-clocks = <&cru CLK_SPI2>;
- assigned-clock-rates = <200000000>;
- num-cs = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
-
- pmic@0 {
- compatible = "rockchip,rk806";
- reg = <0x0>;
- interrupt-parent = <&gpio0>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
- <&rk806_dvs2_null>, <&rk806_dvs3_null>;
- spi-max-frequency = <1000000>;
- system-power-controller;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc5v0_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc_2v0_pldo_s3>;
- vcc12-supply = <&vcc5v0_sys>;
- vcc13-supply = <&vcc_1v1_nldo_s3>;
- vcc14-supply = <&vcc_1v1_nldo_s3>;
- vcca-supply = <&vcc5v0_sys>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- rk806_dvs1_null: dvs1-null-pins {
- pins = "gpio_pwrctrl1";
- function = "pin_fun0";
- };
-
- rk806_dvs2_null: dvs2-null-pins {
- pins = "gpio_pwrctrl2";
- function = "pin_fun0";
- };
-
- rk806_dvs3_null: dvs3-null-pins {
- pins = "gpio_pwrctrl3";
- function = "pin_fun0";
- };
-
- regulators {
- vdd_gpu_s0: dcdc-reg1 {
- regulator-name = "vdd_gpu_s0";
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
- regulator-enable-ramp-delay = <400>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_lit_s0: dcdc-reg2 {
- regulator-name = "vdd_cpu_lit_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_log_s0: dcdc-reg3 {
- regulator-name = "vdd_log_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <750000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <750000>;
- };
- };
-
- vdd_vdenc_s0: dcdc-reg4 {
- regulator-name = "vdd_vdenc_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_ddr_s0: dcdc-reg5 {
- regulator-name = "vdd_ddr_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <900000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <850000>;
- };
- };
-
- vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 {
- regulator-name = "vdd2_ddr_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-max-microvolt = <1100000>;
- regulator-min-microvolt = <1100000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_2v0_pldo_s3: dcdc-reg7 {
- regulator-name = "vdd_2v0_pldo_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <2000000>;
- };
- };
-
- vcc_3v3_s3: dcdc-reg8 {
- regulator-name = "vcc_3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vddq_ddr_s0: dcdc-reg9 {
- regulator-name = "vddq_ddr_s0";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8_s3: dcdc-reg10 {
- regulator-name = "vcc_1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- avcc_1v8_s0: pldo-reg1 {
- regulator-name = "avcc_1v8_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8_s0: pldo-reg2 {
- regulator-name = "vcc_1v8_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- avdd_1v2_s0: pldo-reg3 {
- regulator-name = "avdd_1v2_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v3_s0: pldo-reg4 {
- regulator-name = "vcc_3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_sd_s0: pldo-reg5 {
- regulator-name = "vccio_sd_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- pldo6_s3: pldo-reg6 {
- regulator-name = "pldo6_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_0v75_s3: nldo-reg1 {
- regulator-name = "vdd_0v75_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <750000>;
- };
- };
-
- vdd_ddr_pll_s0: nldo-reg2 {
- regulator-name = "vdd_ddr_pll_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <850000>;
- };
- };
-
- avdd_0v75_s0: nldo-reg3 {
- regulator-name = "avdd_0v75_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_0v85_s0: nldo-reg4 {
- regulator-name = "vdd_0v85_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_0v75_s0: nldo-reg5 {
- regulator-name = "vdd_0v75_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&tsadc {
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&u2phy0_otg {
- status = "okay";
-};
-
-&u2phy2 {
- status = "okay";
-};
-
-&u2phy2_host {
- status = "okay";
-};
-
-&u2phy3 {
- status = "okay";
-};
-
-&u2phy3_host {
- status = "okay";
-};
-
-&uart2 {
- pinctrl-0 = <&uart2m0_xfer>;
- status = "okay";
-};
-
-&usbdp_phy0 {
- mode-switch;
- orientation-switch;
- sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
- sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbdp_phy0_typec_ss: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&usbc0_ss>;
- };
-
- usbdp_phy0_typec_sbu: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&usbc0_sbu>;
- };
- };
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host0_xhci {
- dr_mode = "otg";
- usb-role-switch;
- status = "okay";
-
- port {
- usb_host0_xhci_drd_sw: endpoint {
- remote-endpoint = <&usbc0_hs>;
- };
- };
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usb_host2_xhci {
- status = "okay";
-};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588s-orangepi-5.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 5";
+ compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
+
+ vcc3v3_pcie20: vcc3v3-pcie20-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc3v3_pcie20";
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&pcie2x1l2 {
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie20>;
+ status = "okay";
+};
+
+&sfc {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
similarity index 96%
copy from arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
copy to arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index feea6b20a6bf..6436703a94f4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -10,12 +10,9 @@
#include "rk3588s.dtsi"
/ {
- model = "Xunlong Orange Pi 5";
- compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
-
aliases {
ethernet0 = &gmac1;
- mmc0 = &sdmmc;
+ mmc1 = &sdmmc;
};
chosen {
@@ -79,18 +76,6 @@ vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_s3>;
};
-
- vcc3v3_pcie20: vcc3v3-pcie20-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
- regulator-name = "vcc3v3_pcie20";
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- startup-delay-us = <50000>;
- vin-supply = <&vcc5v0_sys>;
- };
};
&combphy0_ps {
@@ -291,12 +276,6 @@ rgmii_phy1: ethernet-phy@1 {
};
};
-&pcie2x1l2 {
- reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie20>;
- status = "okay";
-};
-
&pinctrl {
gpio-func {
leds_gpio: leds-gpio {
@@ -326,6 +305,17 @@ &saradc {
status = "okay";
};
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "disabled";
+};
+
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
@@ -342,7 +332,7 @@ &sdmmc {
&sfc {
pinctrl-names = "default";
pinctrl-0 = <&fspim0_pins>;
- status = "okay";
+ status = "disabled";
flash@0 {
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
new file mode 100644
index 000000000000..158cc27c444c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588s-orangepi-5.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 5B";
+ compatible = "xunlong,orangepi-5b", "rockchip,rk3588s";
+
+ aliases {
+ mmc0 = &sdhci;
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
--
2.46.1
Powered by blists - more mailing lists