lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJM55Z-3R5tbvpQB7mLF6b=FD9Wg-78_KPww2nqOLr566WPOFg@mail.gmail.com>
Date: Thu, 17 Oct 2024 04:01:31 -0700
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Conor Dooley <conor@...nel.org>, linux-riscv@...ts.infradead.org
Cc: Conor Dooley <conor.dooley@...rochip.com>, stable@...r.kernel.org, 
	Aurelien Jarno <aurelien@...el32.net>, Emil Renner Berthing <kernel@...il.dk>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, 
	Changhuang Liang <changhuang.liang@...rfivetech.com>, devicetree@...r.kernel.org, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1] riscv: dts: starfive: disable unused csi/camss nodes

Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@...rochip.com>
>
> Aurelien reported probe failures due to the csi node being enabled
> without having a camera attached to it. A camera was in the initial
> submissions, but was removed from the dts, as it had not actually been
> present on the board, but was from an addon board used by the
> developer of the relevant drivers. The non-camera pipeline nodes were
> not disabled when this happened and the probe failures are problematic
> for Debian. Disable them.
>
> CC: stable@...r.kernel.org
> Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
> Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
> Reported-by: Aurelien Jarno <aurelien@...el32.net>
> Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>

Thanks!

Reviewed-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>

> ---
> CC: Emil Renner Berthing <kernel@...il.dk>
> CC: Rob Herring <robh@...nel.org>
> CC: Krzysztof Kozlowski <krzk+dt@...nel.org>
> CC: Conor Dooley <conor+dt@...nel.org>
> CC: Changhuang Liang <changhuang.liang@...rfivetech.com>
> CC: devicetree@...r.kernel.org
> CC: linux-riscv@...ts.infradead.org
> CC: linux-kernel@...r.kernel.org
> ---
>  arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 --
>  1 file changed, 2 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index c7771b3b64758..d6c55f1cc96a9 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -128,7 +128,6 @@ &camss {
>  	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
>  			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
>  	assigned-clock-rates = <49500000>, <198000000>;
> -	status = "okay";
>
>  	ports {
>  		#address-cells = <1>;
> @@ -151,7 +150,6 @@ camss_from_csi2rx: endpoint {
>  &csi2rx {
>  	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
>  	assigned-clock-rates = <297000000>;
> -	status = "okay";
>
>  	ports {
>  		#address-cells = <1>;
> --
> 2.45.2
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ