lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1d2477439ec2bb7f5145648da4be5dcd8cfb6847.1729509613.git.matthias.schiffer@ew.tq-group.com>
Date: Mon, 21 Oct 2024 13:34:27 +0200
From: Matthias Schiffer <matthias.schiffer@...tq-group.com>
To: Lee Jones <lee@...nel.org>
Cc: linux@...tq-group.com,
	linux-kernel@...r.kernel.org,
	Gregor Herburger <gregor.herburger@...group.com>,
	Matthias Schiffer <matthias.schiffer@...tq-group.com>
Subject: [PATCH v5 5/5] mfd: tqmx86: add I2C IRQ support

From: Gregor Herburger <gregor.herburger@...group.com>

The i2c-ocores controller can run in interrupt mode on tqmx86 modules.
Add module parameter to allow configuring the IRQ number, similar to the
handling of the GPIO IRQ.

Signed-off-by: Gregor Herburger <gregor.herburger@...group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
---

v2: improve module parameter description (was patch 4/4)
v3: replace IRQ 0 resource with an empty placeholder to simplify error handling
v4: no changes
v5: move placeholder to the end of the resource array, use define for index

 drivers/mfd/tqmx86.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index 1fd2212bf492c..94126a484c412 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -50,6 +50,7 @@
 #define TQMX86_REG_IO_EXT_INT_9			2
 #define TQMX86_REG_IO_EXT_INT_12		3
 #define TQMX86_REG_IO_EXT_INT_MASK		0x3
+#define TQMX86_REG_IO_EXT_INT_I2C_SHIFT		0
 #define TQMX86_REG_IO_EXT_INT_GPIO_SHIFT	4
 #define TQMX86_REG_SAUC		0x17
 
@@ -60,11 +61,18 @@ static uint gpio_irq;
 module_param(gpio_irq, uint, 0);
 MODULE_PARM_DESC(gpio_irq, "GPIO IRQ number (valid parameters: 7, 9, 12)");
 
+static uint i2c_irq;
+module_param(i2c_irq, uint, 0);
+MODULE_PARM_DESC(i2c_irq, "I2C IRQ number (valid parameters: 7, 9, 12)");
+
 /* Index of IRQ placeholder in resource list */
 #define TQMX86_IRQ_GPIO 1
+#define TQMX86_IRQ_I2C 1
 
-static const struct resource tqmx_i2c_soft_resources[] = {
+static struct resource tqmx_i2c_soft_resources[] = {
 	DEFINE_RES_IO(TQMX86_IOBASE_I2C, TQMX86_IOSIZE_I2C),
+	/* Placeholder for IRQ resource - filled in by the probe function */
+	[TQMX86_IRQ_I2C] = {},
 };
 
 static const struct resource tqmx_watchdog_resources[] = {
@@ -262,6 +270,14 @@ static int tqmx86_probe(struct platform_device *pdev)
 	ocores_platform_data.clock_khz = tqmx86_board_id_to_clk_rate(dev, board_id);
 
 	if (i2c_det == TQMX86_REG_I2C_DETECT_SOFT) {
+		if (i2c_irq) {
+			err = tqmx86_setup_irq(dev, "I2C", i2c_irq, io_base,
+					       TQMX86_REG_IO_EXT_INT_I2C_SHIFT);
+			if (!err)
+				/* Assumes the IRQ resource placeholder is first */
+				tqmx_i2c_soft_resources[TQMX86_IRQ_I2C] = DEFINE_RES_IRQ(i2c_irq);
+		}
+
 		err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
 					   tqmx86_i2c_soft_dev,
 					   ARRAY_SIZE(tqmx86_i2c_soft_dev),
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ