[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9f7f0fd7-bca9-4c92-9590-ce621dce7f5f@ideasonboard.com>
Date: Wed, 23 Oct 2024 15:00:22 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: Michal Simek <michal.simek@....com>, Lars-Peter Clausen
<lars@...afoo.de>, Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc: linux-sound@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Vishal Sagar <vishal.sagar@....com>,
Anatoliy Klymenko <anatoliy.klymenko@....com>,
Péter Ujfalusi <peter.ujfalusi@...il.com>
Subject: Re: [PATCH v3 2/3] arm64: dts: zynqmp: Add DMA for DP audio
Hi Michal,
On 08/10/2024 11:22, Michal Simek wrote:
>
>
> On 9/10/24 13:19, Tomi Valkeinen wrote:
>> Add the two DMA channels used for the DisplayPort audio to the
>> zynqmp_dpsub node.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
>> ---
>> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 7 +++++--
>> 1 file changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/
>> dts/xilinx/zynqmp.dtsi
>> index b1b31dcf6291..673ca8422e6b 100644
>> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
>> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
>> @@ -1207,11 +1207,14 @@ zynqmp_dpsub: display@...a0000 {
>> "dp_vtc_pixel_clk_in";
>> power-domains = <&zynqmp_firmware PD_DP>;
>> resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
>> - dma-names = "vid0", "vid1", "vid2", "gfx0";
>> + dma-names = "vid0", "vid1", "vid2", "gfx0",
>> + "aud0", "aud1";
>> dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
>> <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
>> <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
>> - <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
>> + <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>,
>> + <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO0>,
>> + <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO1>;
>> ports {
>> #address-cells = <1>;
>>
>
> Acked-by: Michal Simek <michal.simek@....com>
>
> If you want me to take this patch via my tree please let me know.
Thanks. I've sent a v4, but no changes to this patch.
I'm not sure what is the custom with xilinx dts changes. With the other
platforms dts changes have always gone through a single tree, not via
driver trees.
I don't have a preference either way, so if there's no clear rule here,
I can take this one with the other patches.
Tomi
Powered by blists - more mailing lists