[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CABCoZhB62CKhCnZTCgTAhEh27td4Gw6XjJ-uYQJRqJuN9NPqmw@mail.gmail.com>
Date: Fri, 25 Oct 2024 12:24:06 -0700
From: anish kumar <yesanishhere@...il.com>
To: jassisinghbrar@...il.com, Jonathan Corbet <corbet@....net>
Cc: linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
Bagas Sanjaya <bagasdotme@...il.com>
Subject: Re: [PATCH 2/2] mailbox: Documentation: add the latest documentation
Hello Jassi,
I hope to get some more comments from you before
spinning up a new revision.
On Thu, Oct 24, 2024 at 8:38 PM Bagas Sanjaya <bagasdotme@...il.com> wrote:
>
> On Sat, Oct 19, 2024 at 12:55:34PM -0700, anish kumar wrote:
> > 1. added client documentation
> > 2. added controller documentation.
> > 3. added framework documentation
>
> One doc topic on each patch, please.
>
> >
> > Signed-off-by: anish kumar <yesanishhere@...il.com>
> > ---
> > Documentation/driver-api/mailbox/client.rst | 192 ++++++++++++++++++
> > Documentation/driver-api/mailbox/core.rst | 182 +++++++++++++++++
> > Documentation/driver-api/mailbox/index.rst | 45 ++++
> > .../writing_mailbox_controller_drivers.rst | 179 ++++++++++++++++
> > 4 files changed, 598 insertions(+)
> > create mode 100644 Documentation/driver-api/mailbox/client.rst
> > create mode 100644 Documentation/driver-api/mailbox/core.rst
> > create mode 100644 Documentation/driver-api/mailbox/index.rst
> > create mode 100644 Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
> >
> > diff --git a/Documentation/driver-api/mailbox/client.rst b/Documentation/driver-api/mailbox/client.rst
> > new file mode 100644
> > index 000000000000..9088f8373423
> > --- /dev/null
> > +++ b/Documentation/driver-api/mailbox/client.rst
> > @@ -0,0 +1,192 @@
> > +Mailbox Client Documentation
> > +============================
> > +
> > +Overview
> > +--------
> > +The mailbox client driver is responsible for sending and receiving messages
> > +to and from a remote processor. It uses mailbox APIs provided by the
> > +mailbox framework.
> > +
> > +Mailbox Structure
> > +-----------------
> > +The mailbox structure is defined as follows:
> > +
> > +.. code-block:: c
> > +
> > + struct mbox_client {
> > + //device associated with the mailbox
> > + struct device *dev;
> > + // callback for transmission completion
> > + void (*tx_done)(struct mbox_client *client);
> > + // callback to prepare for sending a message
> > + void (*tx_prepare)(struct mbox_client *client);
> > + // callback for received messages
> > + void (*rx_callback)(struct mbox_client *client, void *data);
> > + // flag to indicate if transmission should block
> > + bool tx_block;
> > + // indicates if the client knows when transmission is done
> > + bool knows_txdone;
> > + };
> > +
> > +Key Functions
> > +-------------
> > +1. Requesting a Mailbox Channel
> > + - **Function**: `mbox_request_channel(struct mbox_client *client,
> > + unsigned int channel)`
> > + - **Description**: Requests a mailbox channel for sending messages.
> > + - **Parameters**:
> > + - `client`: Pointer to the mailbox client structure.
> > + - `channel`: The specific mailbox channel to request.
> > + - **Returns**: A pointer to the mailbox channel on success, or an error
> > + code on failure.
> > +
> > +2. Sending a Message
> > + - **Function**: `mbox_send_message(struct mbox_chan *chan, void *msg)`
> > + - **Description**: Sends a message through the mailbox channel.
> > + - **Parameters**:
> > + - `chan`: The mailbox channel used for communication.
> > + - `msg`: Pointer to the message to be sent (usually NULL for dummy
> > + messages).
> > + - **Returns**: 0 on success, or a negative error code on failure.
> > +
> > +3. Transmitting Completion
> > + - **Function**: `mbox_client_txdone(struct mbox_chan *chan, unsigned int
> > + msg_id)`
> > + - **Description**: Notifies the mailbox framework that message
> > + transmission is complete.
> > + - **Parameters**:
> > + - `chan`: The mailbox channel associated with the message.
> > + - `msg_id`: The identifier of the message that was transmitted.
>
> These functions should've been documented as kernel-doc comments, though.
>
> > +
> > +Usage Example
> > +-------------
> > +In a typical mailbox client driver, the following steps are typically
> > +performed:
> > +
> > +1. Initialize the Mailbox Client:
> > +
> > + .. code-block:: c
> > +
> > + struct mbox_client my_mbox_client = {
> > + .dev = &my_device,
> > + .tx_done = my_tx_done_callback,
> > + .rx_callback = my_rx_callback,
> > + .tx_block = false,
> > + .knows_txdone = true,
> > + };
> > +
> > +2. Request a Mailbox Channel:
> > +
> > + .. code-block:: c
> > +
> > + mbox_chan = mbox_request_channel(&my_mbox_client, 0);
> > + if (IS_ERR(mbox_chan)) {
> > + // Handle error
> > + }
> > +
> > +3. Send a Message:
> > +
> > + .. code-block:: c
> > +
> > + int ret = mbox_send_message(mbox_chan, NULL); // Sending a dummy message
> > + if (ret < 0) {
> > + // Handle error
> > + }
> > +
> > +4. Complete Transmission:
> > +
> > + .. code-block:: c
> > +
> > + mbox_client_txdone(mbox_chan, 0);
> > +
> > +Interrupt Handling
> > +------------------
> > +The mailbox interface can trigger interrupts upon message receipt. Handlers
> > +should be implemented in the `rx_callback` function defined in the mailbox
> > +client structure to process incoming messages.
> > +
> > +Example Mailbox Client Driver
> > +-----------------------------
> > +.. code-block:: c
> > +
> > + struct demo_client {
> > + struct mbox_client cl;
> > + struct mbox_chan *mbox;
> > + struct completion c;
> > + bool async;
> > + /* ... */
> > + };
> > +
> > + /*
> > + * This is the handler for data received from remote. The behaviour is purely
> > + * dependent upon the protocol. This is just an example.
> > + */
> > + static void message_from_remote(struct mbox_client *cl, void *mssg)
> > + {
> > + struct demo_client *dc = container_of(cl, struct demo_client, cl);
> > + if (dc->async) {
> > + if (is_an_ack(mssg)) {
> > + /* An ACK to our last sample sent */
> > + return; /* Or do something else here */
> > + } else { /* A new message from remote */
> > + queue_req(mssg);
> > + }
> > + } else {
> > + /* Remote f/w sends only ACK packets on this channel */
> > + return;
> > + }
> > + }
> > +
> > + static void sample_sent(struct mbox_client *cl, void *mssg, int r)
> > + {
> > + struct demo_client *dc = container_of(cl, struct demo_client, cl);
> > + complete(&dc->c);
> > + }
> > +
> > + static void client_demo(struct platform_device *pdev)
> > + {
> > + struct demo_client *dc_sync, *dc_async;
> > + /* The controller already knows async_pkt and sync_pkt */
> > + struct async_pkt ap;
> > + struct sync_pkt sp;
> > +
> > + dc_sync = kzalloc(sizeof(*dc_sync), GFP_KERNEL);
> > + dc_async = kzalloc(sizeof(*dc_async), GFP_KERNEL);
> > +
> > + /* Populate non-blocking mode client */
> > + dc_async->cl.dev = &pdev->dev;
> > + dc_async->cl.rx_callback = message_from_remote;
> > + dc_async->cl.tx_done = sample_sent;
> > + dc_async->cl.tx_block = false;
> > + dc_async->cl.tx_tout = 0; /* doesn't matter here */
> > + dc_async->cl.knows_txdone = false; /* depending upon protocol */
> > + dc_async->async = true;
> > + init_completion(&dc_async->c);
> > +
> > + /* Populate blocking mode client */
> > + dc_sync->cl.dev = &pdev->dev;
> > + dc_sync->cl.rx_callback = message_from_remote;
> > + dc_sync->cl.tx_done = NULL; /* operate in blocking mode */
> > + dc_sync->cl.tx_block = true;
> > + dc_sync->cl.tx_tout = 500; /* by half a second */
> > + dc_sync->cl.knows_txdone = false; /* depending upon protocol */
> > + dc_sync->async = false;
> > +
> > + /* ASync mailbox is listed second in 'mboxes' property */
> > + dc_async->mbox = mbox_request_channel(&dc_async->cl, 1);
> > + /* Populate data packet */
> > + /* ap.xxx = 123; etc */
> > + /* Send async message to remote */
> > + mbox_send_message(dc_async->mbox, &ap);
> > +
> > + /* Sync mailbox is listed first in 'mboxes' property */
> > + dc_sync->mbox = mbox_request_channel(&dc_sync->cl, 0);
> > + /* Populate data packet */
> > + /* sp.abc = 123; etc */
> > + /* Send message to remote in blocking mode */
> > + mbox_send_message(dc_sync->mbox, &sp);
> > + /* At this point 'sp' has been sent */
> > +
> > + /* Now wait for async chan to be done */
> > + wait_for_completion(&dc_async->c);
> > + }
> > diff --git a/Documentation/driver-api/mailbox/core.rst b/Documentation/driver-api/mailbox/core.rst
> > new file mode 100644
> > index 000000000000..d1220086da67
> > --- /dev/null
> > +++ b/Documentation/driver-api/mailbox/core.rst
> > @@ -0,0 +1,182 @@
> > +=====================
> > +mailbox documentation
> > +=====================
> > +
> > +Hardware Introduction
> > +=====================
> > +
> > +Mailbox hardware is a specialized component found in multi-core
> > +processors and embedded systems that facilitates inter-processor
> > +communication (IPC) or communication between different hardware
> > +components. It provides a structured mechanism for sending and
> > +receiving messages, allowing various processors or devices to
> > +exchange data efficiently. Here's an overview of its key
> > +characteristics and functions:
> > +
> > +Key Characteristics of Mailbox Hardware
> > +Interrupt Handling: Many mailbox implementations support
> > +interrupt-driven communication. This allows a receiving processor
> > +to be alerted when a new message arrives, facilitating immediate
> > +processing without polling the mailbox constantly.
> > +
> > +Hardware Registers: Mailbox hardware often includes registers for
> > +configuration and status monitoring. These registers can be used
> > +to control the mailbox's behavior, check for available messages,
> > +or acknowledge message receipt.
> > +
> > +Support for Multiple Protocols: Mailboxes can support various
> > +communication protocols, enabling interoperability between different
> > +hardware components and simplifying the integration of diverse systems.
> > +
> > +Synchronous and Asynchronous Modes: Mailbox hardware can operate in
> > +both synchronous and asynchronous modes. In synchronous mode, the
> > +sender may wait for the receiver to acknowledge receipt before
> > +proceeding, while in asynchronous mode, the sender can continue
> > +executing other tasks immediately after sending the message.
> > +
> > +
> > +Mailbox framework design
> > +========================
> > +
> > +The mailbox facilitates interprocessor communication by allowing processors to
> > +exchange messages or signals. The mailbox framework consists of:
> > +
> > +Mailbox Controller: This is platform-specific and is responsible for configuring
> > +and managing interrupts from the remote processor. It offers a generic API for
> > +the mailbox client.
> > +
> > +Mailbox Client: This component handles the sending and receiving of messages.
> > +
> > +
> > +............................................................................
> > +: client driver client_a client_b :
> > +............................................................................
> > + ^-------------------^
> > + |
> > + |
> > +............................................................................
> > +: controller framework mailbox :
> > +....................................|.......................................
> > + |
> > + |
> > +............................................................................
> > +: controller driver device specific :
> > +....................................|.......................................
> > + |
> > + |
> > +kernel |
> > +............................................................................
> > +hardware |
> > + |
> > + |
> > +............................................................................
> > +: remote processor :
> > +............................................................................
>
> htmldocs build errors out:
>
> Documentation/driver-api/mailbox/core.rst:57: WARNING: Block quote ends without a blank line; unexpected unindent.
> Documentation/driver-api/mailbox/core.rst:57: CRITICAL: Missing matching underline for section title overline.
>
> ............................................................................
> : controller framework mailbox :
> ....................................|.......................................
>
> reST markup error:
> Documentation/driver-api/mailbox/core.rst:57: (SEVERE/4) Missing matching underline for section title overline.
>
> ............................................................................
> : controller framework mailbox :
> ....................................|.......................................
>
> I have to fix up the design diagram and wrap it:
>
> ---- >8 ----
> diff --git a/Documentation/driver-api/mailbox/core.rst b/Documentation/driver-api/mailbox/core.rst
> index d1220086da679f..8d56d81007c11c 100644
> --- a/Documentation/driver-api/mailbox/core.rst
> +++ b/Documentation/driver-api/mailbox/core.rst
> @@ -47,31 +47,32 @@ the mailbox client.
>
> Mailbox Client: This component handles the sending and receiving of messages.
>
> +::
>
> -............................................................................
> -: client driver client_a client_b :
> -............................................................................
> - ^-------------------^
> - |
> - |
> -............................................................................
> -: controller framework mailbox :
> -....................................|.......................................
> - |
> - |
> -............................................................................
> -: controller driver device specific :
> -....................................|.......................................
> - |
> - |
> -kernel |
> -............................................................................
> -hardware |
> - |
> - |
> -............................................................................
> -: remote processor :
> -............................................................................
> + +---------------------------------------------------------------------------+
> + | client driver client_a client_b |
> + +---------------------------------------------------------------------------+
> + ^-------------------^
> + |
> + |
> + +--------------------------------------------------------------------------+
> + | controller framework mailbox |
> + +-----------------------------------|--------------------------------------+
> + |
> + |
> + +--------------------------------------------------------------------------+
> + | controller driver device specific |
> + +-----------------------------------|--------------------------------------+
> + |
> + |
> + kernel |
> + ----------------------------------------------------------------------------
> + hardware |
> + |
> + |
> + +--------------------------------------------------------------------------+
> + | remote processor |
> + +--------------------------------------------------------------------------+
>
>
> In the context of a mailbox framework, a channel refers to a dedicated
>
> > +
> > +
> > +In the context of a mailbox framework, a channel refers to a dedicated
> > +communication pathway between two or more processors or components. By using
> > +channels, the framework abstracts the complexity of interprocessor communication.
> > +
> > +Data Structures
> > +================
> > +
> > +- **struct mbox_client**
> > + This structure represents a client that communicates over a mailbox
> > + channel. It holds information such as:
> > + - A pointer to the device associated with the client (`dev`).
> > + - Callback functions for handling message transmission events, including:
> > + - `rx_callback`: Called when a message is received.
> > + - `tx_done`: Called when a message transmission is acknowledged.
> > + - Flags that specify the client’s configuration, such as whether it operates
> > + in blocking mode.
> > +
> > +- **struct mbox_chan**
> > + This structure represents an individual mailbox channel. It maintains the
> > + state required for message queuing and transmission. Key members include:
> > + - `msg_data`: Array of messages queued for transmission.
> > + - `msg_count`: Number of messages currently queued.
> > + - `msg_free`: Index of the next free slot in the message queue.
> > + - `active_req`: Pointer to the currently active message being transmitted.
> > + - Synchronization primitives to manage access from multiple contexts.
> > +
> > +- **struct mbox_controller**
> > + This structure represents a mailbox controller that manages multiple
> > + channels. It includes:
> > + - A pointer to the device managing the mailbox.
> > + - Operations for sending and receiving messages, as well as initializing
> > + and shutting down the mailbox.
> > + - A list of associated channels and the total number of channels available.
>
> Shouldn't these structs be documented as kernel-doc comments? tl;dr:
> see Documentation/doc-guide/kernel-doc.html
>
> > +
> > +controller framework APIs
> > +=========================
> > +
> > +``struct `mbox_controller` Initialization
> > +-----------------------------------------
>
> Properly double-backquote the struct name to format it as inline code:
>
> ---- >8 ----
> diff --git a/Documentation/driver-api/mailbox/core.rst b/Documentation/driver-api/mailbox/core.rst
> index 239538f497e41a..d83456164464aa 100644
> --- a/Documentation/driver-api/mailbox/core.rst
> +++ b/Documentation/driver-api/mailbox/core.rst
> @@ -117,7 +117,7 @@ Data Structures
> controller framework APIs
> =========================
>
> -``struct `mbox_controller` Initialization
> +``struct mbox_controller`` Initialization
> -----------------------------------------
>
> Just like any other kernel framework, the whole mailbox controller registration
>
> > +
> > +Just like any other kernel framework, the whole mailbox controller registration
> > +relies on the driver filling a structure and registering against the
> > +framework. In our case, that structure is mbox_controller.
> > +
> > +The first thing you need to do in your driver is to allocate this
> > +structure. Any of the usual memory allocators will do, but you'll also
> > +need to initialize a few fields in there:
> > +
> > +- ``dev``: should hold the pointer to the ``struct device`` associated
> > + to your current driver instance.
> > +
> > +- ``ops``: Operators that work on each communication channel.
> > +
> > +- ``chans``: Array of channels.
> > +
> > +- ``num_chans``: Number of channels in the `chans` array.
> > +
> > +- ``txdone_irq``: Indicates if the controller can report to the API
> > + when the last transmitted data was read by the
> > + remote (e.g., if it has a TX ACK interrupt).
> > +
> > +All the below fields are not mandatory.
> > +
> > +- ``txdone_poll``: Indicates if the controller can read but not report
> > + the TX done. For example, some register may show
> > + the TX status, but no interrupt is raised. This
> > + field is ignored if `txdone_irq` is set.
> > +
> > +- ``txpoll_period``: If `txdone_poll` is in effect, the API polls for
> > + the last TX status after this many milliseconds.
> > +
> > +- ``of_xlate``: Controller driver-specific mapping of channel via
> > + Device Tree (DT).
> > +
> > +
> > +Key Functions
> > +-------------
> > +
> > +- **int devm_mbox_controller_register(struct mbox_controller *mbox)**
> > + This function registers a mailbox controller with the kernel. It makes the
> > + channels associated with the controller available for client requests. The
> > + function performs sanity checks on the controller structure to ensure all
> > + necessary fields are populated.
> > +
> > +- **struct mbox_chan *mbox_request_channel(struct mbox_client *cl, int index)**
> > + This function requests a mailbox channel for a specified client, identified
> > + by an index. It searches for the appropriate mailbox channel, and if found,
> > + it returns a pointer to the channel. If the request fails (e.g., if the
> > + index is invalid), it returns an error pointer.
> > +
> > +- **void mbox_free_channel(struct mbox_chan *chan)**
> > + This function releases a mailbox channel that was previously allocated for a
> > + client. It ensures that the channel can be reused by other clients. If any
> > + messages are still in the queue, they are aborted, and no callbacks are made.
> > +
> > +- **int mbox_send_message(struct mbox_chan *chan, void *mssg)**
> > + This function is used by clients to send a message through the specified
> > + mailbox channel. The function can operate in either blocking or non-blocking
> > + mode, depending on the client’s configuration. It will queue the message for
> > + transmission and notify the client once the message is acknowledged.
> > +
> > +- **void mbox_chan_received_data(struct mbox_chan *chan, void *mssg)**
> > + This function is called by the controller driver to notify the mailbox
> > + framework that a message has been received on the specified channel. The
> > + received message is then passed to the appropriate client's `rx_callback`
> > + function for processing.
>
> Shouldn't these functions also be documented as kernel-doc comments?
>
> > diff --git a/Documentation/driver-api/mailbox/index.rst b/Documentation/driver-api/mailbox/index.rst
> > new file mode 100644
> > index 000000000000..e254a8fdb66a
> > --- /dev/null
> > +++ b/Documentation/driver-api/mailbox/index.rst
> > @@ -0,0 +1,45 @@
> > +=======================
> > +Mailbox documentation
> > +=======================
> > +
> > +Mailbox documentation provides documents for various aspects of mailbox
> > +framework.
> > +
> > +Mailbox development documentation
> > +---------------------------------
> > +
> > +This book helps with mailbox internal APIs and guide for mailbox device
> > +driver writers.
> > +
> > +.. toctree::
> > + :maxdepth: 1
> > +
> > + core
> > +
> > +mailbox controller driver documentation
> > +------------------------------
> > +
> > +This book is a guide to device driver writers on how to register
> > +mailbox controller to the mailbox framework.
> > +
> > +.. toctree::
> > + :maxdepth: 1
> > +
> > + writing_mailbox_controller_drivers
> > +
> > +mailbox client driver documentation
> > +------------------------------
>
> Match up section underline length by its title:
>
> ---- >8 ----
> diff --git a/Documentation/driver-api/mailbox/index.rst b/Documentation/driver-api/mailbox/index.rst
> index e254a8fdb66ac7..02d7d5e8660999 100644
> --- a/Documentation/driver-api/mailbox/index.rst
> +++ b/Documentation/driver-api/mailbox/index.rst
> @@ -1,6 +1,6 @@
> -=======================
> +=====================
> Mailbox documentation
> -=======================
> +=====================
>
> Mailbox documentation provides documents for various aspects of mailbox
> framework.
> @@ -17,7 +17,7 @@ driver writers.
> core
>
> mailbox controller driver documentation
> -------------------------------
> +---------------------------------------
>
> This book is a guide to device driver writers on how to register
> mailbox controller to the mailbox framework.
> @@ -28,7 +28,7 @@ mailbox controller to the mailbox framework.
> writing_mailbox_controller_drivers
>
> mailbox client driver documentation
> -------------------------------
> +-----------------------------------
>
> This book is a guide to mailbox client driver writers.
>
>
> > +
> > +This book is a guide to mailbox client driver writers.
> > +
> > +.. toctree::
> > + :maxdepth: 1
> > +
> > + client
> > +
> > +.. only:: subproject and html
> > +
> > + Indices
> > + =======
> > +
> > + * :ref:`genindex`
>
> Fix up also the reference link on parent toctree:
>
> ---- >8 ----
> diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
> index 7f83e05769b4a4..b4d78b92fd921a 100644
> --- a/Documentation/driver-api/index.rst
> +++ b/Documentation/driver-api/index.rst
> @@ -102,7 +102,7 @@ Subsystem-specific APIs
> ipmb
> ipmi
> libata
> - mailbox
> + mailbox/index
> md/index
> media/index
> mei/index
>
> > diff --git a/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst b/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
> > new file mode 100644
> > index 000000000000..2a82645c1357
> > --- /dev/null
> > +++ b/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
> > @@ -0,0 +1,179 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +.. _writing_mailbox_controller_drivers:
> > +
> > +==================================
> > +Writing Mailbox Controller Drivers
> > +==================================
> > +
> > +Introduction
> > +============
> > +
> > +This document serves as a basic guideline for driver programmers that need
> > +to hack a new mailbox controller driver or understand the essentials of
> > +the existing ones.
> > +
> > +Driver Boilerplate
> > +==================
> > +
> > +As a bare minimum, a mailbox controller driver needs to call
> > +``mbox_controller_register`` function to register with the framework.
> > +
> > +A basic driver skeleton could look like this for a mailbox hardware that
> > +has the following characteristics:
> > +a. It supports only a single channel, i.e., only the remote processor can
> > + send interrupts.
> > +b. Data transfer is over the registers associated with mailbox hardware.
> > +c. Mailbox hardware is configured to receive interrupts.
> > +d. When the remote processor is ready to send data, it triggers a mailbox
> > + interrupt.
> > +e. As part of interrupt handling by Linux, it copies data from the registers.
> > +
> > +.. code-block:: c
> > +
> > + #include <linux/device.h>
> > + #include <linux/interrupt.h>
> > + #include <linux/io.h>
> > + #include <linux/kernel.h>
> > + #include <linux/mailbox_controller.h>
> > + #include <linux/module.h>
> > + #include <linux/of.h>
> > + #include <linux/platform_device.h>
> > + #define DRIVER_NAME "dummy_controller"
> > +
> > + struct dummy_mbox {
> > + struct device *dev;
> > + struct mbox_controller controller;
> > + int irq;
> > + };
> > +
> > + static void dummy_mbox_receive(struct mbox_chan *chan)
> > + {
> > + struct dummy_mbox *mbox = chan->con_priv;
> > + int val;
> > +
> > + // Data copied from registers
> > + val = read_register();
> > + mbox_chan_received_data(chan, &val);
> > + }
> > +
> > + static irqreturn_t dummy_mbox_irq_handler(int irq, void *data)
> > + {
> > + struct mbox_chan *chan = data;
> > + struct dummy_mbox *mbox = chan->con_priv;
> > + u32 reg;
> > +
> > + // Read registers to see if data is received
> > + dummy_mbox_receive(chan);
> > + mbox_chan_txdone(chan, 0);
> > + return reg ? IRQ_HANDLED : IRQ_NONE;
> > + }
> > +
> > + static int dummy_mbox_send_data(struct mbox_chan *chan, void *data)
> > + {
> > + // Write data in registers to send it to the remote processor
> > + return 0;
> > + }
> > +
> > + static int dummy_mbox_startup(struct mbox_chan *chan)
> > + {
> > + struct dummy_mbox *mbox = chan->con_priv;
> > + u32 reg;
> > + int ret;
> > +
> > + ret = devm_request_irq(mbox->dev, mbox->irq, dummy_mbox_irq_handler, 0,
> > + DRIVER_NAME, chan);
> > + if (ret < 0) {
> > + dev_err(mbox->dev, "Cannot request irq\n");
> > + return ret;
> > + }
> > +
> > + /* Register write to enable IRQ generation */
> > +
> > + return 0;
> > + }
> > +
> > + static void dummy_mbox_shutdown(struct mbox_chan *chan)
> > + {
> > + struct dummy_mbox *mbox = chan->con_priv;
> > +
> > + /* Disable interrupt generation */
> > + devm_free_irq(mbox->dev, mbox->irq, chan);
> > + }
> > +
> > + static const struct mbox_chan_ops dummy_mbox_ops = {
> > + .send_data = dummy_mbox_send_data,
> > + .startup = dummy_mbox_startup,
> > + .shutdown = dummy_mbox_shutdown,
> > + };
> > +
> > + static int dummy_mbox_probe(struct platform_device *pdev)
> > + {
> > + struct dummy_mbox *mbox;
> > + struct mbox_chan *chans;
> > + int ret;
> > +
> > + mbox = devm_kzalloc(&pdev->dev, sizeof(*mbox), GFP_KERNEL);
> > + if (!mbox)
> > + return -ENOMEM;
> > +
> > + /* Allocate one channel */
> > + chans = devm_kzalloc(&pdev->dev, sizeof(*chans), GFP_KERNEL);
> > + if (!chans)
> > + return -ENOMEM;
> > +
> > + mbox->base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(mbox->base))
> > + return PTR_ERR(mbox->base);
> > +
> > + mbox->irq = platform_get_irq(pdev, 0);
> > + if (mbox->irq < 0)
> > + return mbox->irq;
> > +
> > + mbox->dev = &pdev->dev;
> > +
> > + /* Hardware supports only one channel. */
> > + mbox->controller.dev = mbox->dev;
> > + mbox->controller.num_chans = 1;
> > + mbox->controller.chans = chans;
> > + mbox->controller.ops = &dummy_mbox_ops;
> > + mbox->controller.txdone_irq = true;
> > +
> > + ret = devm_mbox_controller_register(mbox->dev, &mbox->controller);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Could not register mailbox controller\n");
> > + return ret;
> > + }
> > +
> > + return ret;
> > + }
> > +
> > + static const struct of_device_id dummy_mbox_match[] = {
> > + { .compatible = "dummy,dummy-mailbox" },
> > + { },
> > + };
> > +
> > + MODULE_DEVICE_TABLE(of, dummy_mbox_match);
> > +
> > + static struct platform_driver dummy_mbox_driver = {
> > + .probe = dummy_mbox_probe,
> > + .driver = {
> > + .name = DRIVER_NAME,
> > + .of_match_table = dummy_mbox_match,
> > + },
> > + };
> > +
> > + module_platform_driver(dummy_mbox_driver);
> > + MODULE_LICENSE("GPL v2");
> > + MODULE_DESCRIPTION("Dummy mailbox controller driver");
> > +
> > +In the above code, a couple of things are done:
> > +a. The controller is registered in the probe along with callbacks, which in
> > + this case are the bare minimum: ``startup``, ``shutdown``, and
> > + ``send_data``.
> > +b. IRQ is registered to get notifications from the remote processor.
> > +c. In the IRQ handler, registers are read to copy data, and
> > + ``mbox_chan_received_data`` is called to hand over the data to the client.
> > +d. ``mbox_chan_txdone`` is called to let the framework know that this data
> > + is the last data and no more data is to be expected for the current transfer.
> > +
>
> Sphinx warns out numerous indentation warnings on the lists, so I have to
> fix them up:
>
> ---- >8 ----
> diff --git a/Documentation/driver-api/mailbox/client.rst b/Documentation/driver-api/mailbox/client.rst
> index 9088f83734230d..17dafaca056777 100644
> --- a/Documentation/driver-api/mailbox/client.rst
> +++ b/Documentation/driver-api/mailbox/client.rst
> @@ -31,6 +31,7 @@ The mailbox structure is defined as follows:
> Key Functions
> -------------
> 1. Requesting a Mailbox Channel
> +
> - **Function**: `mbox_request_channel(struct mbox_client *client,
> unsigned int channel)`
> - **Description**: Requests a mailbox channel for sending messages.
> @@ -41,15 +42,19 @@ Key Functions
> code on failure.
>
> 2. Sending a Message
> +
> - **Function**: `mbox_send_message(struct mbox_chan *chan, void *msg)`
> - **Description**: Sends a message through the mailbox channel.
> - **Parameters**:
> +
> - `chan`: The mailbox channel used for communication.
> - `msg`: Pointer to the message to be sent (usually NULL for dummy
> messages).
> +
> - **Returns**: 0 on success, or a negative error code on failure.
>
> 3. Transmitting Completion
> +
> - **Function**: `mbox_client_txdone(struct mbox_chan *chan, unsigned int
> msg_id)`
> - **Description**: Notifies the mailbox framework that message
> diff --git a/Documentation/driver-api/mailbox/core.rst b/Documentation/driver-api/mailbox/core.rst
> index 8d56d81007c11c..239538f497e41a 100644
> --- a/Documentation/driver-api/mailbox/core.rst
> +++ b/Documentation/driver-api/mailbox/core.rst
> @@ -85,16 +85,20 @@ Data Structures
> - **struct mbox_client**
> This structure represents a client that communicates over a mailbox
> channel. It holds information such as:
> +
> - A pointer to the device associated with the client (`dev`).
> - Callback functions for handling message transmission events, including:
> +
> - `rx_callback`: Called when a message is received.
> - `tx_done`: Called when a message transmission is acknowledged.
> +
> - Flags that specify the client’s configuration, such as whether it operates
> in blocking mode.
>
> - **struct mbox_chan**
> This structure represents an individual mailbox channel. It maintains the
> state required for message queuing and transmission. Key members include:
> +
> - `msg_data`: Array of messages queued for transmission.
> - `msg_count`: Number of messages currently queued.
> - `msg_free`: Index of the next free slot in the message queue.
> @@ -104,6 +108,7 @@ Data Structures
> - **struct mbox_controller**
> This structure represents a mailbox controller that manages multiple
> channels. It includes:
> +
> - A pointer to the device managing the mailbox.
> - Operations for sending and receiving messages, as well as initializing
> and shutting down the mailbox.
> @@ -133,21 +138,20 @@ need to initialize a few fields in there:
> - ``num_chans``: Number of channels in the `chans` array.
>
> - ``txdone_irq``: Indicates if the controller can report to the API
> - when the last transmitted data was read by the
> - remote (e.g., if it has a TX ACK interrupt).
> + when the last transmitted data was read by the remote (e.g., if it has a
> + TX ACK interrupt).
>
> All the below fields are not mandatory.
>
> - ``txdone_poll``: Indicates if the controller can read but not report
> - the TX done. For example, some register may show
> - the TX status, but no interrupt is raised. This
> - field is ignored if `txdone_irq` is set.
> + the TX done. For example, some register may show the TX status, but no
> + interrupt is raised. This field is ignored if `txdone_irq` is set.
>
> - ``txpoll_period``: If `txdone_poll` is in effect, the API polls for
> - the last TX status after this many milliseconds.
> + the last TX status after this many milliseconds.
>
> - ``of_xlate``: Controller driver-specific mapping of channel via
> - Device Tree (DT).
> + Device Tree (DT).
>
>
> Key Functions
> diff --git a/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst b/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
> index 2a82645c13573e..853adf6918173d 100644
> --- a/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
> +++ b/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
> @@ -21,6 +21,7 @@ As a bare minimum, a mailbox controller driver needs to call
>
> A basic driver skeleton could look like this for a mailbox hardware that
> has the following characteristics:
> +
> a. It supports only a single channel, i.e., only the remote processor can
> send interrupts.
> b. Data transfer is over the registers associated with mailbox hardware.
> @@ -168,6 +169,7 @@ e. As part of interrupt handling by Linux, it copies data from the registers.
> MODULE_DESCRIPTION("Dummy mailbox controller driver");
>
> In the above code, a couple of things are done:
> +
> a. The controller is registered in the probe along with callbacks, which in
> this case are the bare minimum: ``startup``, ``shutdown``, and
> ``send_data``.
>
> Thanks.
>
> --
> An old man doll... just what I always wanted! - Clara
Powered by blists - more mailing lists