[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZxsSvbXXiwNAHCWX@archie.me>
Date: Fri, 25 Oct 2024 10:38:37 +0700
From: Bagas Sanjaya <bagasdotme@...il.com>
To: anish kumar <yesanishhere@...il.com>, jassisinghbrar@...il.com,
corbet@....net
Cc: linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] mailbox: Documentation: add the latest documentation
On Sat, Oct 19, 2024 at 12:55:34PM -0700, anish kumar wrote:
> 1. added client documentation
> 2. added controller documentation.
> 3. added framework documentation
One doc topic on each patch, please.
>
> Signed-off-by: anish kumar <yesanishhere@...il.com>
> ---
> Documentation/driver-api/mailbox/client.rst | 192 ++++++++++++++++++
> Documentation/driver-api/mailbox/core.rst | 182 +++++++++++++++++
> Documentation/driver-api/mailbox/index.rst | 45 ++++
> .../writing_mailbox_controller_drivers.rst | 179 ++++++++++++++++
> 4 files changed, 598 insertions(+)
> create mode 100644 Documentation/driver-api/mailbox/client.rst
> create mode 100644 Documentation/driver-api/mailbox/core.rst
> create mode 100644 Documentation/driver-api/mailbox/index.rst
> create mode 100644 Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
>
> diff --git a/Documentation/driver-api/mailbox/client.rst b/Documentation/driver-api/mailbox/client.rst
> new file mode 100644
> index 000000000000..9088f8373423
> --- /dev/null
> +++ b/Documentation/driver-api/mailbox/client.rst
> @@ -0,0 +1,192 @@
> +Mailbox Client Documentation
> +============================
> +
> +Overview
> +--------
> +The mailbox client driver is responsible for sending and receiving messages
> +to and from a remote processor. It uses mailbox APIs provided by the
> +mailbox framework.
> +
> +Mailbox Structure
> +-----------------
> +The mailbox structure is defined as follows:
> +
> +.. code-block:: c
> +
> + struct mbox_client {
> + //device associated with the mailbox
> + struct device *dev;
> + // callback for transmission completion
> + void (*tx_done)(struct mbox_client *client);
> + // callback to prepare for sending a message
> + void (*tx_prepare)(struct mbox_client *client);
> + // callback for received messages
> + void (*rx_callback)(struct mbox_client *client, void *data);
> + // flag to indicate if transmission should block
> + bool tx_block;
> + // indicates if the client knows when transmission is done
> + bool knows_txdone;
> + };
> +
> +Key Functions
> +-------------
> +1. Requesting a Mailbox Channel
> + - **Function**: `mbox_request_channel(struct mbox_client *client,
> + unsigned int channel)`
> + - **Description**: Requests a mailbox channel for sending messages.
> + - **Parameters**:
> + - `client`: Pointer to the mailbox client structure.
> + - `channel`: The specific mailbox channel to request.
> + - **Returns**: A pointer to the mailbox channel on success, or an error
> + code on failure.
> +
> +2. Sending a Message
> + - **Function**: `mbox_send_message(struct mbox_chan *chan, void *msg)`
> + - **Description**: Sends a message through the mailbox channel.
> + - **Parameters**:
> + - `chan`: The mailbox channel used for communication.
> + - `msg`: Pointer to the message to be sent (usually NULL for dummy
> + messages).
> + - **Returns**: 0 on success, or a negative error code on failure.
> +
> +3. Transmitting Completion
> + - **Function**: `mbox_client_txdone(struct mbox_chan *chan, unsigned int
> + msg_id)`
> + - **Description**: Notifies the mailbox framework that message
> + transmission is complete.
> + - **Parameters**:
> + - `chan`: The mailbox channel associated with the message.
> + - `msg_id`: The identifier of the message that was transmitted.
These functions should've been documented as kernel-doc comments, though.
> +
> +Usage Example
> +-------------
> +In a typical mailbox client driver, the following steps are typically
> +performed:
> +
> +1. Initialize the Mailbox Client:
> +
> + .. code-block:: c
> +
> + struct mbox_client my_mbox_client = {
> + .dev = &my_device,
> + .tx_done = my_tx_done_callback,
> + .rx_callback = my_rx_callback,
> + .tx_block = false,
> + .knows_txdone = true,
> + };
> +
> +2. Request a Mailbox Channel:
> +
> + .. code-block:: c
> +
> + mbox_chan = mbox_request_channel(&my_mbox_client, 0);
> + if (IS_ERR(mbox_chan)) {
> + // Handle error
> + }
> +
> +3. Send a Message:
> +
> + .. code-block:: c
> +
> + int ret = mbox_send_message(mbox_chan, NULL); // Sending a dummy message
> + if (ret < 0) {
> + // Handle error
> + }
> +
> +4. Complete Transmission:
> +
> + .. code-block:: c
> +
> + mbox_client_txdone(mbox_chan, 0);
> +
> +Interrupt Handling
> +------------------
> +The mailbox interface can trigger interrupts upon message receipt. Handlers
> +should be implemented in the `rx_callback` function defined in the mailbox
> +client structure to process incoming messages.
> +
> +Example Mailbox Client Driver
> +-----------------------------
> +.. code-block:: c
> +
> + struct demo_client {
> + struct mbox_client cl;
> + struct mbox_chan *mbox;
> + struct completion c;
> + bool async;
> + /* ... */
> + };
> +
> + /*
> + * This is the handler for data received from remote. The behaviour is purely
> + * dependent upon the protocol. This is just an example.
> + */
> + static void message_from_remote(struct mbox_client *cl, void *mssg)
> + {
> + struct demo_client *dc = container_of(cl, struct demo_client, cl);
> + if (dc->async) {
> + if (is_an_ack(mssg)) {
> + /* An ACK to our last sample sent */
> + return; /* Or do something else here */
> + } else { /* A new message from remote */
> + queue_req(mssg);
> + }
> + } else {
> + /* Remote f/w sends only ACK packets on this channel */
> + return;
> + }
> + }
> +
> + static void sample_sent(struct mbox_client *cl, void *mssg, int r)
> + {
> + struct demo_client *dc = container_of(cl, struct demo_client, cl);
> + complete(&dc->c);
> + }
> +
> + static void client_demo(struct platform_device *pdev)
> + {
> + struct demo_client *dc_sync, *dc_async;
> + /* The controller already knows async_pkt and sync_pkt */
> + struct async_pkt ap;
> + struct sync_pkt sp;
> +
> + dc_sync = kzalloc(sizeof(*dc_sync), GFP_KERNEL);
> + dc_async = kzalloc(sizeof(*dc_async), GFP_KERNEL);
> +
> + /* Populate non-blocking mode client */
> + dc_async->cl.dev = &pdev->dev;
> + dc_async->cl.rx_callback = message_from_remote;
> + dc_async->cl.tx_done = sample_sent;
> + dc_async->cl.tx_block = false;
> + dc_async->cl.tx_tout = 0; /* doesn't matter here */
> + dc_async->cl.knows_txdone = false; /* depending upon protocol */
> + dc_async->async = true;
> + init_completion(&dc_async->c);
> +
> + /* Populate blocking mode client */
> + dc_sync->cl.dev = &pdev->dev;
> + dc_sync->cl.rx_callback = message_from_remote;
> + dc_sync->cl.tx_done = NULL; /* operate in blocking mode */
> + dc_sync->cl.tx_block = true;
> + dc_sync->cl.tx_tout = 500; /* by half a second */
> + dc_sync->cl.knows_txdone = false; /* depending upon protocol */
> + dc_sync->async = false;
> +
> + /* ASync mailbox is listed second in 'mboxes' property */
> + dc_async->mbox = mbox_request_channel(&dc_async->cl, 1);
> + /* Populate data packet */
> + /* ap.xxx = 123; etc */
> + /* Send async message to remote */
> + mbox_send_message(dc_async->mbox, &ap);
> +
> + /* Sync mailbox is listed first in 'mboxes' property */
> + dc_sync->mbox = mbox_request_channel(&dc_sync->cl, 0);
> + /* Populate data packet */
> + /* sp.abc = 123; etc */
> + /* Send message to remote in blocking mode */
> + mbox_send_message(dc_sync->mbox, &sp);
> + /* At this point 'sp' has been sent */
> +
> + /* Now wait for async chan to be done */
> + wait_for_completion(&dc_async->c);
> + }
> diff --git a/Documentation/driver-api/mailbox/core.rst b/Documentation/driver-api/mailbox/core.rst
> new file mode 100644
> index 000000000000..d1220086da67
> --- /dev/null
> +++ b/Documentation/driver-api/mailbox/core.rst
> @@ -0,0 +1,182 @@
> +=====================
> +mailbox documentation
> +=====================
> +
> +Hardware Introduction
> +=====================
> +
> +Mailbox hardware is a specialized component found in multi-core
> +processors and embedded systems that facilitates inter-processor
> +communication (IPC) or communication between different hardware
> +components. It provides a structured mechanism for sending and
> +receiving messages, allowing various processors or devices to
> +exchange data efficiently. Here's an overview of its key
> +characteristics and functions:
> +
> +Key Characteristics of Mailbox Hardware
> +Interrupt Handling: Many mailbox implementations support
> +interrupt-driven communication. This allows a receiving processor
> +to be alerted when a new message arrives, facilitating immediate
> +processing without polling the mailbox constantly.
> +
> +Hardware Registers: Mailbox hardware often includes registers for
> +configuration and status monitoring. These registers can be used
> +to control the mailbox's behavior, check for available messages,
> +or acknowledge message receipt.
> +
> +Support for Multiple Protocols: Mailboxes can support various
> +communication protocols, enabling interoperability between different
> +hardware components and simplifying the integration of diverse systems.
> +
> +Synchronous and Asynchronous Modes: Mailbox hardware can operate in
> +both synchronous and asynchronous modes. In synchronous mode, the
> +sender may wait for the receiver to acknowledge receipt before
> +proceeding, while in asynchronous mode, the sender can continue
> +executing other tasks immediately after sending the message.
> +
> +
> +Mailbox framework design
> +========================
> +
> +The mailbox facilitates interprocessor communication by allowing processors to
> +exchange messages or signals. The mailbox framework consists of:
> +
> +Mailbox Controller: This is platform-specific and is responsible for configuring
> +and managing interrupts from the remote processor. It offers a generic API for
> +the mailbox client.
> +
> +Mailbox Client: This component handles the sending and receiving of messages.
> +
> +
> +............................................................................
> +: client driver client_a client_b :
> +............................................................................
> + ^-------------------^
> + |
> + |
> +............................................................................
> +: controller framework mailbox :
> +....................................|.......................................
> + |
> + |
> +............................................................................
> +: controller driver device specific :
> +....................................|.......................................
> + |
> + |
> +kernel |
> +............................................................................
> +hardware |
> + |
> + |
> +............................................................................
> +: remote processor :
> +............................................................................
htmldocs build errors out:
Documentation/driver-api/mailbox/core.rst:57: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/driver-api/mailbox/core.rst:57: CRITICAL: Missing matching underline for section title overline.
............................................................................
: controller framework mailbox :
....................................|.......................................
reST markup error:
Documentation/driver-api/mailbox/core.rst:57: (SEVERE/4) Missing matching underline for section title overline.
............................................................................
: controller framework mailbox :
....................................|.......................................
I have to fix up the design diagram and wrap it:
---- >8 ----
diff --git a/Documentation/driver-api/mailbox/core.rst b/Documentation/driver-api/mailbox/core.rst
index d1220086da679f..8d56d81007c11c 100644
--- a/Documentation/driver-api/mailbox/core.rst
+++ b/Documentation/driver-api/mailbox/core.rst
@@ -47,31 +47,32 @@ the mailbox client.
Mailbox Client: This component handles the sending and receiving of messages.
+::
-............................................................................
-: client driver client_a client_b :
-............................................................................
- ^-------------------^
- |
- |
-............................................................................
-: controller framework mailbox :
-....................................|.......................................
- |
- |
-............................................................................
-: controller driver device specific :
-....................................|.......................................
- |
- |
-kernel |
-............................................................................
-hardware |
- |
- |
-............................................................................
-: remote processor :
-............................................................................
+ +---------------------------------------------------------------------------+
+ | client driver client_a client_b |
+ +---------------------------------------------------------------------------+
+ ^-------------------^
+ |
+ |
+ +--------------------------------------------------------------------------+
+ | controller framework mailbox |
+ +-----------------------------------|--------------------------------------+
+ |
+ |
+ +--------------------------------------------------------------------------+
+ | controller driver device specific |
+ +-----------------------------------|--------------------------------------+
+ |
+ |
+ kernel |
+ ----------------------------------------------------------------------------
+ hardware |
+ |
+ |
+ +--------------------------------------------------------------------------+
+ | remote processor |
+ +--------------------------------------------------------------------------+
In the context of a mailbox framework, a channel refers to a dedicated
> +
> +
> +In the context of a mailbox framework, a channel refers to a dedicated
> +communication pathway between two or more processors or components. By using
> +channels, the framework abstracts the complexity of interprocessor communication.
> +
> +Data Structures
> +================
> +
> +- **struct mbox_client**
> + This structure represents a client that communicates over a mailbox
> + channel. It holds information such as:
> + - A pointer to the device associated with the client (`dev`).
> + - Callback functions for handling message transmission events, including:
> + - `rx_callback`: Called when a message is received.
> + - `tx_done`: Called when a message transmission is acknowledged.
> + - Flags that specify the client’s configuration, such as whether it operates
> + in blocking mode.
> +
> +- **struct mbox_chan**
> + This structure represents an individual mailbox channel. It maintains the
> + state required for message queuing and transmission. Key members include:
> + - `msg_data`: Array of messages queued for transmission.
> + - `msg_count`: Number of messages currently queued.
> + - `msg_free`: Index of the next free slot in the message queue.
> + - `active_req`: Pointer to the currently active message being transmitted.
> + - Synchronization primitives to manage access from multiple contexts.
> +
> +- **struct mbox_controller**
> + This structure represents a mailbox controller that manages multiple
> + channels. It includes:
> + - A pointer to the device managing the mailbox.
> + - Operations for sending and receiving messages, as well as initializing
> + and shutting down the mailbox.
> + - A list of associated channels and the total number of channels available.
Shouldn't these structs be documented as kernel-doc comments? tl;dr:
see Documentation/doc-guide/kernel-doc.html
> +
> +controller framework APIs
> +=========================
> +
> +``struct `mbox_controller` Initialization
> +-----------------------------------------
Properly double-backquote the struct name to format it as inline code:
---- >8 ----
diff --git a/Documentation/driver-api/mailbox/core.rst b/Documentation/driver-api/mailbox/core.rst
index 239538f497e41a..d83456164464aa 100644
--- a/Documentation/driver-api/mailbox/core.rst
+++ b/Documentation/driver-api/mailbox/core.rst
@@ -117,7 +117,7 @@ Data Structures
controller framework APIs
=========================
-``struct `mbox_controller` Initialization
+``struct mbox_controller`` Initialization
-----------------------------------------
Just like any other kernel framework, the whole mailbox controller registration
> +
> +Just like any other kernel framework, the whole mailbox controller registration
> +relies on the driver filling a structure and registering against the
> +framework. In our case, that structure is mbox_controller.
> +
> +The first thing you need to do in your driver is to allocate this
> +structure. Any of the usual memory allocators will do, but you'll also
> +need to initialize a few fields in there:
> +
> +- ``dev``: should hold the pointer to the ``struct device`` associated
> + to your current driver instance.
> +
> +- ``ops``: Operators that work on each communication channel.
> +
> +- ``chans``: Array of channels.
> +
> +- ``num_chans``: Number of channels in the `chans` array.
> +
> +- ``txdone_irq``: Indicates if the controller can report to the API
> + when the last transmitted data was read by the
> + remote (e.g., if it has a TX ACK interrupt).
> +
> +All the below fields are not mandatory.
> +
> +- ``txdone_poll``: Indicates if the controller can read but not report
> + the TX done. For example, some register may show
> + the TX status, but no interrupt is raised. This
> + field is ignored if `txdone_irq` is set.
> +
> +- ``txpoll_period``: If `txdone_poll` is in effect, the API polls for
> + the last TX status after this many milliseconds.
> +
> +- ``of_xlate``: Controller driver-specific mapping of channel via
> + Device Tree (DT).
> +
> +
> +Key Functions
> +-------------
> +
> +- **int devm_mbox_controller_register(struct mbox_controller *mbox)**
> + This function registers a mailbox controller with the kernel. It makes the
> + channels associated with the controller available for client requests. The
> + function performs sanity checks on the controller structure to ensure all
> + necessary fields are populated.
> +
> +- **struct mbox_chan *mbox_request_channel(struct mbox_client *cl, int index)**
> + This function requests a mailbox channel for a specified client, identified
> + by an index. It searches for the appropriate mailbox channel, and if found,
> + it returns a pointer to the channel. If the request fails (e.g., if the
> + index is invalid), it returns an error pointer.
> +
> +- **void mbox_free_channel(struct mbox_chan *chan)**
> + This function releases a mailbox channel that was previously allocated for a
> + client. It ensures that the channel can be reused by other clients. If any
> + messages are still in the queue, they are aborted, and no callbacks are made.
> +
> +- **int mbox_send_message(struct mbox_chan *chan, void *mssg)**
> + This function is used by clients to send a message through the specified
> + mailbox channel. The function can operate in either blocking or non-blocking
> + mode, depending on the client’s configuration. It will queue the message for
> + transmission and notify the client once the message is acknowledged.
> +
> +- **void mbox_chan_received_data(struct mbox_chan *chan, void *mssg)**
> + This function is called by the controller driver to notify the mailbox
> + framework that a message has been received on the specified channel. The
> + received message is then passed to the appropriate client's `rx_callback`
> + function for processing.
Shouldn't these functions also be documented as kernel-doc comments?
> diff --git a/Documentation/driver-api/mailbox/index.rst b/Documentation/driver-api/mailbox/index.rst
> new file mode 100644
> index 000000000000..e254a8fdb66a
> --- /dev/null
> +++ b/Documentation/driver-api/mailbox/index.rst
> @@ -0,0 +1,45 @@
> +=======================
> +Mailbox documentation
> +=======================
> +
> +Mailbox documentation provides documents for various aspects of mailbox
> +framework.
> +
> +Mailbox development documentation
> +---------------------------------
> +
> +This book helps with mailbox internal APIs and guide for mailbox device
> +driver writers.
> +
> +.. toctree::
> + :maxdepth: 1
> +
> + core
> +
> +mailbox controller driver documentation
> +------------------------------
> +
> +This book is a guide to device driver writers on how to register
> +mailbox controller to the mailbox framework.
> +
> +.. toctree::
> + :maxdepth: 1
> +
> + writing_mailbox_controller_drivers
> +
> +mailbox client driver documentation
> +------------------------------
Match up section underline length by its title:
---- >8 ----
diff --git a/Documentation/driver-api/mailbox/index.rst b/Documentation/driver-api/mailbox/index.rst
index e254a8fdb66ac7..02d7d5e8660999 100644
--- a/Documentation/driver-api/mailbox/index.rst
+++ b/Documentation/driver-api/mailbox/index.rst
@@ -1,6 +1,6 @@
-=======================
+=====================
Mailbox documentation
-=======================
+=====================
Mailbox documentation provides documents for various aspects of mailbox
framework.
@@ -17,7 +17,7 @@ driver writers.
core
mailbox controller driver documentation
-------------------------------
+---------------------------------------
This book is a guide to device driver writers on how to register
mailbox controller to the mailbox framework.
@@ -28,7 +28,7 @@ mailbox controller to the mailbox framework.
writing_mailbox_controller_drivers
mailbox client driver documentation
-------------------------------
+-----------------------------------
This book is a guide to mailbox client driver writers.
> +
> +This book is a guide to mailbox client driver writers.
> +
> +.. toctree::
> + :maxdepth: 1
> +
> + client
> +
> +.. only:: subproject and html
> +
> + Indices
> + =======
> +
> + * :ref:`genindex`
Fix up also the reference link on parent toctree:
---- >8 ----
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 7f83e05769b4a4..b4d78b92fd921a 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -102,7 +102,7 @@ Subsystem-specific APIs
ipmb
ipmi
libata
- mailbox
+ mailbox/index
md/index
media/index
mei/index
> diff --git a/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst b/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
> new file mode 100644
> index 000000000000..2a82645c1357
> --- /dev/null
> +++ b/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
> @@ -0,0 +1,179 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +.. _writing_mailbox_controller_drivers:
> +
> +==================================
> +Writing Mailbox Controller Drivers
> +==================================
> +
> +Introduction
> +============
> +
> +This document serves as a basic guideline for driver programmers that need
> +to hack a new mailbox controller driver or understand the essentials of
> +the existing ones.
> +
> +Driver Boilerplate
> +==================
> +
> +As a bare minimum, a mailbox controller driver needs to call
> +``mbox_controller_register`` function to register with the framework.
> +
> +A basic driver skeleton could look like this for a mailbox hardware that
> +has the following characteristics:
> +a. It supports only a single channel, i.e., only the remote processor can
> + send interrupts.
> +b. Data transfer is over the registers associated with mailbox hardware.
> +c. Mailbox hardware is configured to receive interrupts.
> +d. When the remote processor is ready to send data, it triggers a mailbox
> + interrupt.
> +e. As part of interrupt handling by Linux, it copies data from the registers.
> +
> +.. code-block:: c
> +
> + #include <linux/device.h>
> + #include <linux/interrupt.h>
> + #include <linux/io.h>
> + #include <linux/kernel.h>
> + #include <linux/mailbox_controller.h>
> + #include <linux/module.h>
> + #include <linux/of.h>
> + #include <linux/platform_device.h>
> + #define DRIVER_NAME "dummy_controller"
> +
> + struct dummy_mbox {
> + struct device *dev;
> + struct mbox_controller controller;
> + int irq;
> + };
> +
> + static void dummy_mbox_receive(struct mbox_chan *chan)
> + {
> + struct dummy_mbox *mbox = chan->con_priv;
> + int val;
> +
> + // Data copied from registers
> + val = read_register();
> + mbox_chan_received_data(chan, &val);
> + }
> +
> + static irqreturn_t dummy_mbox_irq_handler(int irq, void *data)
> + {
> + struct mbox_chan *chan = data;
> + struct dummy_mbox *mbox = chan->con_priv;
> + u32 reg;
> +
> + // Read registers to see if data is received
> + dummy_mbox_receive(chan);
> + mbox_chan_txdone(chan, 0);
> + return reg ? IRQ_HANDLED : IRQ_NONE;
> + }
> +
> + static int dummy_mbox_send_data(struct mbox_chan *chan, void *data)
> + {
> + // Write data in registers to send it to the remote processor
> + return 0;
> + }
> +
> + static int dummy_mbox_startup(struct mbox_chan *chan)
> + {
> + struct dummy_mbox *mbox = chan->con_priv;
> + u32 reg;
> + int ret;
> +
> + ret = devm_request_irq(mbox->dev, mbox->irq, dummy_mbox_irq_handler, 0,
> + DRIVER_NAME, chan);
> + if (ret < 0) {
> + dev_err(mbox->dev, "Cannot request irq\n");
> + return ret;
> + }
> +
> + /* Register write to enable IRQ generation */
> +
> + return 0;
> + }
> +
> + static void dummy_mbox_shutdown(struct mbox_chan *chan)
> + {
> + struct dummy_mbox *mbox = chan->con_priv;
> +
> + /* Disable interrupt generation */
> + devm_free_irq(mbox->dev, mbox->irq, chan);
> + }
> +
> + static const struct mbox_chan_ops dummy_mbox_ops = {
> + .send_data = dummy_mbox_send_data,
> + .startup = dummy_mbox_startup,
> + .shutdown = dummy_mbox_shutdown,
> + };
> +
> + static int dummy_mbox_probe(struct platform_device *pdev)
> + {
> + struct dummy_mbox *mbox;
> + struct mbox_chan *chans;
> + int ret;
> +
> + mbox = devm_kzalloc(&pdev->dev, sizeof(*mbox), GFP_KERNEL);
> + if (!mbox)
> + return -ENOMEM;
> +
> + /* Allocate one channel */
> + chans = devm_kzalloc(&pdev->dev, sizeof(*chans), GFP_KERNEL);
> + if (!chans)
> + return -ENOMEM;
> +
> + mbox->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(mbox->base))
> + return PTR_ERR(mbox->base);
> +
> + mbox->irq = platform_get_irq(pdev, 0);
> + if (mbox->irq < 0)
> + return mbox->irq;
> +
> + mbox->dev = &pdev->dev;
> +
> + /* Hardware supports only one channel. */
> + mbox->controller.dev = mbox->dev;
> + mbox->controller.num_chans = 1;
> + mbox->controller.chans = chans;
> + mbox->controller.ops = &dummy_mbox_ops;
> + mbox->controller.txdone_irq = true;
> +
> + ret = devm_mbox_controller_register(mbox->dev, &mbox->controller);
> + if (ret) {
> + dev_err(&pdev->dev, "Could not register mailbox controller\n");
> + return ret;
> + }
> +
> + return ret;
> + }
> +
> + static const struct of_device_id dummy_mbox_match[] = {
> + { .compatible = "dummy,dummy-mailbox" },
> + { },
> + };
> +
> + MODULE_DEVICE_TABLE(of, dummy_mbox_match);
> +
> + static struct platform_driver dummy_mbox_driver = {
> + .probe = dummy_mbox_probe,
> + .driver = {
> + .name = DRIVER_NAME,
> + .of_match_table = dummy_mbox_match,
> + },
> + };
> +
> + module_platform_driver(dummy_mbox_driver);
> + MODULE_LICENSE("GPL v2");
> + MODULE_DESCRIPTION("Dummy mailbox controller driver");
> +
> +In the above code, a couple of things are done:
> +a. The controller is registered in the probe along with callbacks, which in
> + this case are the bare minimum: ``startup``, ``shutdown``, and
> + ``send_data``.
> +b. IRQ is registered to get notifications from the remote processor.
> +c. In the IRQ handler, registers are read to copy data, and
> + ``mbox_chan_received_data`` is called to hand over the data to the client.
> +d. ``mbox_chan_txdone`` is called to let the framework know that this data
> + is the last data and no more data is to be expected for the current transfer.
> +
Sphinx warns out numerous indentation warnings on the lists, so I have to
fix them up:
---- >8 ----
diff --git a/Documentation/driver-api/mailbox/client.rst b/Documentation/driver-api/mailbox/client.rst
index 9088f83734230d..17dafaca056777 100644
--- a/Documentation/driver-api/mailbox/client.rst
+++ b/Documentation/driver-api/mailbox/client.rst
@@ -31,6 +31,7 @@ The mailbox structure is defined as follows:
Key Functions
-------------
1. Requesting a Mailbox Channel
+
- **Function**: `mbox_request_channel(struct mbox_client *client,
unsigned int channel)`
- **Description**: Requests a mailbox channel for sending messages.
@@ -41,15 +42,19 @@ Key Functions
code on failure.
2. Sending a Message
+
- **Function**: `mbox_send_message(struct mbox_chan *chan, void *msg)`
- **Description**: Sends a message through the mailbox channel.
- **Parameters**:
+
- `chan`: The mailbox channel used for communication.
- `msg`: Pointer to the message to be sent (usually NULL for dummy
messages).
+
- **Returns**: 0 on success, or a negative error code on failure.
3. Transmitting Completion
+
- **Function**: `mbox_client_txdone(struct mbox_chan *chan, unsigned int
msg_id)`
- **Description**: Notifies the mailbox framework that message
diff --git a/Documentation/driver-api/mailbox/core.rst b/Documentation/driver-api/mailbox/core.rst
index 8d56d81007c11c..239538f497e41a 100644
--- a/Documentation/driver-api/mailbox/core.rst
+++ b/Documentation/driver-api/mailbox/core.rst
@@ -85,16 +85,20 @@ Data Structures
- **struct mbox_client**
This structure represents a client that communicates over a mailbox
channel. It holds information such as:
+
- A pointer to the device associated with the client (`dev`).
- Callback functions for handling message transmission events, including:
+
- `rx_callback`: Called when a message is received.
- `tx_done`: Called when a message transmission is acknowledged.
+
- Flags that specify the client’s configuration, such as whether it operates
in blocking mode.
- **struct mbox_chan**
This structure represents an individual mailbox channel. It maintains the
state required for message queuing and transmission. Key members include:
+
- `msg_data`: Array of messages queued for transmission.
- `msg_count`: Number of messages currently queued.
- `msg_free`: Index of the next free slot in the message queue.
@@ -104,6 +108,7 @@ Data Structures
- **struct mbox_controller**
This structure represents a mailbox controller that manages multiple
channels. It includes:
+
- A pointer to the device managing the mailbox.
- Operations for sending and receiving messages, as well as initializing
and shutting down the mailbox.
@@ -133,21 +138,20 @@ need to initialize a few fields in there:
- ``num_chans``: Number of channels in the `chans` array.
- ``txdone_irq``: Indicates if the controller can report to the API
- when the last transmitted data was read by the
- remote (e.g., if it has a TX ACK interrupt).
+ when the last transmitted data was read by the remote (e.g., if it has a
+ TX ACK interrupt).
All the below fields are not mandatory.
- ``txdone_poll``: Indicates if the controller can read but not report
- the TX done. For example, some register may show
- the TX status, but no interrupt is raised. This
- field is ignored if `txdone_irq` is set.
+ the TX done. For example, some register may show the TX status, but no
+ interrupt is raised. This field is ignored if `txdone_irq` is set.
- ``txpoll_period``: If `txdone_poll` is in effect, the API polls for
- the last TX status after this many milliseconds.
+ the last TX status after this many milliseconds.
- ``of_xlate``: Controller driver-specific mapping of channel via
- Device Tree (DT).
+ Device Tree (DT).
Key Functions
diff --git a/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst b/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
index 2a82645c13573e..853adf6918173d 100644
--- a/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
+++ b/Documentation/driver-api/mailbox/writing_mailbox_controller_drivers.rst
@@ -21,6 +21,7 @@ As a bare minimum, a mailbox controller driver needs to call
A basic driver skeleton could look like this for a mailbox hardware that
has the following characteristics:
+
a. It supports only a single channel, i.e., only the remote processor can
send interrupts.
b. Data transfer is over the registers associated with mailbox hardware.
@@ -168,6 +169,7 @@ e. As part of interrupt handling by Linux, it copies data from the registers.
MODULE_DESCRIPTION("Dummy mailbox controller driver");
In the above code, a couple of things are done:
+
a. The controller is registered in the probe along with callbacks, which in
this case are the bare minimum: ``startup``, ``shutdown``, and
``send_data``.
Thanks.
--
An old man doll... just what I always wanted! - Clara
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists