| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241025-wip-bl-ad3552r-axi-v0-iio-testing-v8-3-74ca7dd60567@baylibre.com>
Date: Fri, 25 Oct 2024 11:49:36 +0200
From: Angelo Dureghello <adureghello@...libre.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
Jonathan Cameron <jic23@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Olivier Moysan <olivier.moysan@...s.st.com>
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>,
dlechner@...libre.com, Angelo Dureghello <adureghello@...libre.com>
Subject: [PATCH v8 3/8] iio: backend: extend features
From: Angelo Dureghello <adureghello@...libre.com>
Extend backend features with new calls needed later on this
patchset from axi version of ad3552r.
The follwoing calls are added:
iio_backend_ddr_enable()
enable ddr bus transfer
iio_backend_ddr_disable()
disable ddr bus transfer
iio_backend_data_stream_enable()
enable data stream over bus interface
iio_backend_data_stream_disable()
disable data stream over bus interface
iio_backend_data_transfer_addr()
define the target register address where the DAC sample
will be written.
Reviewed-by: Nuno Sa <nuno.sa@...log.com>
Signed-off-by: Angelo Dureghello <adureghello@...libre.com>
---
drivers/iio/industrialio-backend.c | 78 ++++++++++++++++++++++++++++++++++++++
include/linux/iio/backend.h | 17 +++++++++
2 files changed, 95 insertions(+)
diff --git a/drivers/iio/industrialio-backend.c b/drivers/iio/industrialio-backend.c
index 20b3b5212da7..81f3d24f0c50 100644
--- a/drivers/iio/industrialio-backend.c
+++ b/drivers/iio/industrialio-backend.c
@@ -718,6 +718,84 @@ static int __devm_iio_backend_get(struct device *dev, struct iio_backend *back)
return 0;
}
+/**
+ * iio_backend_ddr_enable - Enable interface DDR (Double Data Rate) mode
+ * @back: Backend device
+ *
+ * Enable DDR, data is generated by the IP at each front (raising and falling)
+ * of the bus clock signal.
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
+ */
+int iio_backend_ddr_enable(struct iio_backend *back)
+{
+ return iio_backend_op_call(back, ddr_enable);
+}
+EXPORT_SYMBOL_NS_GPL(iio_backend_ddr_enable, IIO_BACKEND);
+
+/**
+ * iio_backend_ddr_disable - Disable interface DDR (Double Data Rate) mode
+ * @back: Backend device
+ *
+ * Disable DDR, setting into SDR mode (Single Data Rate).
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
+ */
+int iio_backend_ddr_disable(struct iio_backend *back)
+{
+ return iio_backend_op_call(back, ddr_disable);
+}
+EXPORT_SYMBOL_NS_GPL(iio_backend_ddr_disable, IIO_BACKEND);
+
+/**
+ * iio_backend_data_stream_enable - Enable data stream
+ * @back: Backend device
+ *
+ * Enable data stream over the bus interface.
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
+ */
+int iio_backend_data_stream_enable(struct iio_backend *back)
+{
+ return iio_backend_op_call(back, data_stream_enable);
+}
+EXPORT_SYMBOL_NS_GPL(iio_backend_data_stream_enable, IIO_BACKEND);
+
+/**
+ * iio_backend_data_stream_disable - Disable data stream
+ * @back: Backend device
+ *
+ * Disable data stream over the bus interface.
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
+ */
+int iio_backend_data_stream_disable(struct iio_backend *back)
+{
+ return iio_backend_op_call(back, data_stream_disable);
+}
+EXPORT_SYMBOL_NS_GPL(iio_backend_data_stream_disable, IIO_BACKEND);
+
+/**
+ * iio_backend_data_transfer_addr - Set data address.
+ * @back: Backend device
+ * @address: Data register address
+ *
+ * Some devices may need to inform the backend about an address
+ * where to read or write the data.
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
+ */
+int iio_backend_data_transfer_addr(struct iio_backend *back, u32 address)
+{
+ return iio_backend_op_call(back, data_transfer_addr, address);
+}
+EXPORT_SYMBOL_NS_GPL(iio_backend_data_transfer_addr, IIO_BACKEND);
+
static struct iio_backend *__devm_iio_backend_fwnode_get(struct device *dev, const char *name,
struct fwnode_handle *fwnode)
{
diff --git a/include/linux/iio/backend.h b/include/linux/iio/backend.h
index 37d56914d485..10be00f3b120 100644
--- a/include/linux/iio/backend.h
+++ b/include/linux/iio/backend.h
@@ -14,12 +14,14 @@ struct iio_dev;
enum iio_backend_data_type {
IIO_BACKEND_TWOS_COMPLEMENT,
IIO_BACKEND_OFFSET_BINARY,
+ IIO_BACKEND_DATA_UNSIGNED,
IIO_BACKEND_DATA_TYPE_MAX
};
enum iio_backend_data_source {
IIO_BACKEND_INTERNAL_CONTINUOUS_WAVE,
IIO_BACKEND_EXTERNAL,
+ IIO_BACKEND_INTERNAL_RAMP_16BIT,
IIO_BACKEND_DATA_SOURCE_MAX
};
@@ -89,6 +91,11 @@ enum iio_backend_sample_trigger {
* @read_raw: Read a channel attribute from a backend device
* @debugfs_print_chan_status: Print channel status into a buffer.
* @debugfs_reg_access: Read or write register value of backend.
+ * @ddr_enable: Enable interface DDR (Double Data Rate) mode.
+ * @ddr_disable: Disable interface DDR (Double Data Rate) mode.
+ * @data_stream_enable: Enable data stream.
+ * @data_stream_disable: Disable data stream.
+ * @data_transfer_addr: Set data address.
**/
struct iio_backend_ops {
int (*enable)(struct iio_backend *back);
@@ -129,6 +136,11 @@ struct iio_backend_ops {
size_t len);
int (*debugfs_reg_access)(struct iio_backend *back, unsigned int reg,
unsigned int writeval, unsigned int *readval);
+ int (*ddr_enable)(struct iio_backend *back);
+ int (*ddr_disable)(struct iio_backend *back);
+ int (*data_stream_enable)(struct iio_backend *back);
+ int (*data_stream_disable)(struct iio_backend *back);
+ int (*data_transfer_addr)(struct iio_backend *back, u32 address);
};
/**
@@ -164,6 +176,11 @@ int iio_backend_data_sample_trigger(struct iio_backend *back,
int devm_iio_backend_request_buffer(struct device *dev,
struct iio_backend *back,
struct iio_dev *indio_dev);
+int iio_backend_ddr_enable(struct iio_backend *back);
+int iio_backend_ddr_disable(struct iio_backend *back);
+int iio_backend_data_stream_enable(struct iio_backend *back);
+int iio_backend_data_stream_disable(struct iio_backend *back);
+int iio_backend_data_transfer_addr(struct iio_backend *back, u32 address);
ssize_t iio_backend_ext_info_set(struct iio_dev *indio_dev, uintptr_t private,
const struct iio_chan_spec *chan,
const char *buf, size_t len);
--
2.45.0.rc1
Powered by blists - more mailing lists