| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<TY3PR01MB1134615A1D3C84EBCEB23130C864A2@TY3PR01MB11346.jpnprd01.prod.outlook.com>
Date: Mon, 28 Oct 2024 08:07:34 +0000
From: Biju Das <biju.das.jz@...renesas.com>
To: Liu Ying <victor.liu@....com>, "dri-devel@...ts.freedesktop.org"
<dri-devel@...ts.freedesktop.org>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-media@...r.kernel.org"
<linux-media@...r.kernel.org>, "imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>
CC: "andrzej.hajda@...el.com" <andrzej.hajda@...el.com>,
"neil.armstrong@...aro.org" <neil.armstrong@...aro.org>, "rfoss@...nel.org"
<rfoss@...nel.org>, laurent.pinchart <laurent.pinchart@...asonboard.com>,
"jonas@...boo.se" <jonas@...boo.se>, "jernej.skrabec@...il.com"
<jernej.skrabec@...il.com>, "maarten.lankhorst@...ux.intel.com"
<maarten.lankhorst@...ux.intel.com>, "mripard@...nel.org"
<mripard@...nel.org>, "tzimmermann@...e.de" <tzimmermann@...e.de>,
"airlied@...il.com" <airlied@...il.com>, "simona@...ll.ch" <simona@...ll.ch>,
"robh@...nel.org" <robh@...nel.org>, "krzk+dt@...nel.org"
<krzk+dt@...nel.org>, "conor+dt@...nel.org" <conor+dt@...nel.org>,
"quic_jesszhan@...cinc.com" <quic_jesszhan@...cinc.com>, "mchehab@...nel.org"
<mchehab@...nel.org>, "shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>, "kernel@...gutronix.de"
<kernel@...gutronix.de>, "festevam@...il.com" <festevam@...il.com>,
"catalin.marinas@....com" <catalin.marinas@....com>, "will@...nel.org"
<will@...nel.org>, "sakari.ailus@...ux.intel.com"
<sakari.ailus@...ux.intel.com>, "hverkuil@...all.nl" <hverkuil@...all.nl>,
"tomi.valkeinen@...asonboard.com" <tomi.valkeinen@...asonboard.com>,
"quic_bjorande@...cinc.com" <quic_bjorande@...cinc.com>,
"geert+renesas@...der.be" <geert+renesas@...der.be>,
"dmitry.baryshkov@...aro.org" <dmitry.baryshkov@...aro.org>, "arnd@...db.de"
<arnd@...db.de>, "nfraprado@...labora.com" <nfraprado@...labora.com>,
"thierry.reding@...il.com" <thierry.reding@...il.com>, Prabhakar Mahadev Lad
<prabhakar.mahadev-lad.rj@...renesas.com>, "sam@...nborg.org"
<sam@...nborg.org>, "marex@...x.de" <marex@...x.de>
Subject: RE: [PATCH v4 09/13] dt-bindings: display: bridge: Add ITE IT6263
LVDS to HDMI converter
Hi Liu Ying,
Thanks for the patch.
> -----Original Message-----
> From: Liu Ying <victor.liu@....com>
> Sent: 28 October 2024 02:38
> Subject: [PATCH v4 09/13] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
>
> Document ITE IT6263 LVDS to HDMI converter.
>
> Product link:
> https://www.ite.com.tw/en/product/cate1/IT6263
>
> Signed-off-by: Liu Ying <victor.liu@....com>
Reviewed-by: Biju Das <biju.das.jz@...renesas.com>
Cheers,
Biju
> ---
> v4:
> * Require dual-lvds-odd-pixels or dual-lvds-even-pixels DT properties for
> port@1.
> * Drop "data-mirror: true"(30-bit LVDS data bit order is not reversed).
>
> v3:
> * Reference lvds-dual-ports.yaml. (Dmitry)
> * Add data-mapping DT property. (Dmitry, Biju)
> * Allow data-mirror.
> * Drop ite,lvds-link-num-data-lanes DT property. (Dmitry, Biju)
>
> v2:
> * Document number of LVDS link data lanes. (Biju)
> * Simplify ports property by dropping "oneOf". (Rob)
>
> .../bindings/display/bridge/ite,it6263.yaml | 250 ++++++++++++++++++
> 1 file changed, 250 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> new file mode 100644
> index 000000000000..0a10e10d80ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> @@ -0,0 +1,250 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ITE IT6263 LVDS to HDMI converter
> +
> +maintainers:
> + - Liu Ying <victor.liu@....com>
> +
> +description: |
> + The IT6263 is a high-performance single-chip De-SSC(De-Spread
> +Spectrum) LVDS
> + to HDMI converter. Combined with LVDS receiver and HDMI 1.4a
> +transmitter,
> + the IT6263 supports LVDS input and HDMI 1.4 output by conversion function.
> + The built-in LVDS receiver can support single-link and dual-link LVDS
> +inputs,
> + and the built-in HDMI transmitter is fully compliant with HDMI
> +1.4a/3D, HDCP
> + 1.2 and backward compatible with DVI 1.0 specification.
> +
> + The IT6263 also encodes and transmits up to 8 channels of I2S digital
> + audio, with sampling rate up to 192KHz and sample size up to 24 bits.
> + In addition, an S/PDIF input port takes in compressed audio of up to 192KHz frame rate.
> +
> + The newly supported High-Bit Rate(HBR) audio by HDMI specifications
> + v1.3 is provided by the IT6263 in two interfaces: the four I2S input
> + ports or the S/PDIF input port. With both interfaces the highest
> + possible HBR frame rate is supported at up to 768KHz.
> +
> +allOf:
> + - $ref: /schemas/display/lvds-dual-ports.yaml#
> +
> +properties:
> + compatible:
> + const: ite,it6263
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> + description: audio master clock
> +
> + clock-names:
> + const: mclk
> +
> + data-mapping:
> + enum:
> + - jeida-18
> + - jeida-24
> + - jeida-30
> + - vesa-24
> + - vesa-30
> +
> + reset-gpios:
> + maxItems: 1
> +
> + ivdd-supply:
> + description: 1.8V digital logic power
> +
> + ovdd-supply:
> + description: 3.3V I/O pin power
> +
> + txavcc18-supply:
> + description: 1.8V HDMI analog frontend power
> +
> + txavcc33-supply:
> + description: 3.3V HDMI analog frontend power
> +
> + pvcc1-supply:
> + description: 1.8V HDMI frontend core PLL power
> +
> + pvcc2-supply:
> + description: 1.8V HDMI frontend filter PLL power
> +
> + avcc-supply:
> + description: 3.3V LVDS frontend power
> +
> + anvdd-supply:
> + description: 1.8V LVDS frontend analog power
> +
> + apvdd-supply:
> + description: 1.8V LVDS frontend PLL power
> +
> + "#sound-dai-cells":
> + const: 0
> +
> + ite,i2s-audio-fifo-sources:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 4
> + items:
> + enum: [0, 1, 2, 3]
> + description:
> + Each array element indicates the pin number of an I2S serial data input
> + line which is connected to an audio FIFO, from audio FIFO0 to FIFO3.
> +
> + ite,rl-channel-swap-audio-sources:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 4
> + uniqueItems: true
> + items:
> + enum: [0, 1, 2, 3]
> + description:
> + Each array element indicates an audio source whose right channel and left
> + channel are swapped by this converter. For I2S, the element is the pin
> + number of an I2S serial data input line. For S/PDIF, the element is always
> + 0.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0: true
> +
> + port@1:
> + oneOf:
> + - required: [dual-lvds-odd-pixels]
> + - required: [dual-lvds-even-pixels]
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: video port for the HDMI output
> +
> + port@3:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: sound input port
> +
> + required:
> + - port@0
> + - port@2
> +
> +required:
> + - compatible
> + - reg
> + - data-mapping
> + - ivdd-supply
> + - ovdd-supply
> + - txavcc18-supply
> + - txavcc33-supply
> + - pvcc1-supply
> + - pvcc2-supply
> + - avcc-supply
> + - anvdd-supply
> + - apvdd-supply
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + /* single-link LVDS input */
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hdmi@4c {
> + compatible = "ite,it6263";
> + reg = <0x4c>;
> + data-mapping = "jeida-24";
> + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> + ivdd-supply = <®_buck5>;
> + ovdd-supply = <®_vext_3v3>;
> + txavcc18-supply = <®_buck5>;
> + txavcc33-supply = <®_vext_3v3>;
> + pvcc1-supply = <®_buck5>;
> + pvcc2-supply = <®_buck5>;
> + avcc-supply = <®_vext_3v3>;
> + anvdd-supply = <®_buck5>;
> + apvdd-supply = <®_buck5>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + it6263_lvds_link1: endpoint {
> + remote-endpoint = <&ldb_lvds_ch0>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + it6263_out: endpoint {
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> + };
> + };
> + };
> +
> + - |
> + /* dual-link LVDS input */
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hdmi@4c {
> + compatible = "ite,it6263";
> + reg = <0x4c>;
> + data-mapping = "jeida-24";
> + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> + ivdd-supply = <®_buck5>;
> + ovdd-supply = <®_vext_3v3>;
> + txavcc18-supply = <®_buck5>;
> + txavcc33-supply = <®_vext_3v3>;
> + pvcc1-supply = <®_buck5>;
> + pvcc2-supply = <®_buck5>;
> + avcc-supply = <®_vext_3v3>;
> + anvdd-supply = <®_buck5>;
> + apvdd-supply = <®_buck5>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dual-lvds-odd-pixels;
> +
> + it6263_lvds_link1_dual: endpoint {
> + remote-endpoint = <&ldb_lvds_ch0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dual-lvds-even-pixels;
> +
> + it6263_lvds_link2_dual: endpoint {
> + remote-endpoint = <&ldb_lvds_ch1>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + it6263_out_dual: endpoint {
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> + };
> + };
> + };
> --
> 2.34.1
Powered by blists - more mailing lists