| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZyEGLdg744U_xBjp@fedora>
Date: Tue, 29 Oct 2024 23:58:37 +0800
From: Ming Lei <ming.lei@...hat.com>
To: Marek Szyprowski <m.szyprowski@...sung.com>
Cc: Jens Axboe <axboe@...nel.dk>, linux-block@...r.kernel.org,
Christoph Hellwig <hch@....de>,
Peter Zijlstra <peterz@...radead.org>,
Waiman Long <longman@...hat.com>, Boqun Feng <boqun.feng@...il.com>,
Ingo Molnar <mingo@...hat.com>, Will Deacon <will@...nel.org>,
linux-kernel@...r.kernel.org, Bart Van Assche <bvanassche@....org>
Subject: Re: [PATCH V2 3/3] block: model freeze & enter queue as lock for
supporting lockdep
On Tue, Oct 29, 2024 at 12:13:35PM +0100, Marek Szyprowski wrote:
> On 25.10.2024 02:37, Ming Lei wrote:
> > Recently we got several deadlock report[1][2][3] caused by
> > blk_mq_freeze_queue and blk_enter_queue().
> >
> > Turns out the two are just like acquiring read/write lock, so model them
> > as read/write lock for supporting lockdep:
> >
> > 1) model q->q_usage_counter as two locks(io and queue lock)
> >
> > - queue lock covers sync with blk_enter_queue()
> >
> > - io lock covers sync with bio_enter_queue()
> >
> > 2) make the lockdep class/key as per-queue:
> >
> > - different subsystem has very different lock use pattern, shared lock
> > class causes false positive easily
> >
> > - freeze_queue degrades to no lock in case that disk state becomes DEAD
> > because bio_enter_queue() won't be blocked any more
> >
> > - freeze_queue degrades to no lock in case that request queue becomes dying
> > because blk_enter_queue() won't be blocked any more
> >
> > 3) model blk_mq_freeze_queue() as acquire_exclusive & try_lock
> > - it is exclusive lock, so dependency with blk_enter_queue() is covered
> >
> > - it is trylock because blk_mq_freeze_queue() are allowed to run
> > concurrently
> >
> > 4) model blk_enter_queue() & bio_enter_queue() as acquire_read()
> > - nested blk_enter_queue() are allowed
> >
> > - dependency with blk_mq_freeze_queue() is covered
> >
> > - blk_queue_exit() is often called from other contexts(such as irq), and
> > it can't be annotated as lock_release(), so simply do it in
> > blk_enter_queue(), this way still covered cases as many as possible
> >
> > With lockdep support, such kind of reports may be reported asap and
> > needn't wait until the real deadlock is triggered.
> >
> > For example, lockdep report can be triggered in the report[3] with this
> > patch applied.
> >
> > [1] occasional block layer hang when setting 'echo noop > /sys/block/sda/queue/scheduler'
> > https://bugzilla.kernel.org/show_bug.cgi?id=219166
> >
> > [2] del_gendisk() vs blk_queue_enter() race condition
> > https://lore.kernel.org/linux-block/20241003085610.GK11458@google.com/
> >
> > [3] queue_freeze & queue_enter deadlock in scsi
> > https://lore.kernel.org/linux-block/ZxG38G9BuFdBpBHZ@fedora/T/#u
> >
> > Reviewed-by: Christoph Hellwig <hch@....de>
> > Signed-off-by: Ming Lei <ming.lei@...hat.com>
>
> This patch landed yesterday in linux-next as commit f1be1788a32e
> ("block: model freeze & enter queue as lock for supporting lockdep").
> In my tests I found that it introduces the following 2 lockdep warnings:
>
> 1. On Samsung Exynos 4412-based Odroid U3 board (ARM 32bit), observed
> when booting it:
>
> ======================================================
> WARNING: possible circular locking dependency detected
> 6.12.0-rc4-00037-gf1be1788a32e #9290 Not tainted
> ------------------------------------------------------
> find/1284 is trying to acquire lock:
> cf3b8534 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x30/0x70
>
> but task is already holding lock:
> c203a0c8 (&sb->s_type->i_mutex_key#2){++++}-{3:3}, at:
> iterate_dir+0x30/0x140
>
> which lock already depends on the new lock.
>
>
> the existing dependency chain (in reverse order) is:
>
> -> #4 (&sb->s_type->i_mutex_key#2){++++}-{3:3}:
> down_write+0x44/0xc4
> start_creating+0x8c/0x170
> debugfs_create_dir+0x1c/0x178
> blk_register_queue+0xa0/0x1c0
> add_disk_fwnode+0x210/0x434
> brd_alloc+0x1cc/0x210
> brd_init+0xac/0x104
> do_one_initcall+0x64/0x30c
> kernel_init_freeable+0x1c4/0x228
> kernel_init+0x1c/0x12c
> ret_from_fork+0x14/0x28
>
> -> #3 (&q->debugfs_mutex){+.+.}-{3:3}:
> __mutex_lock+0x94/0x94c
> mutex_lock_nested+0x1c/0x24
> blk_mq_init_sched+0x140/0x204
> elevator_init_mq+0xb8/0x130
> add_disk_fwnode+0x3c/0x434
The above chain can be cut by the following patch because disk state
can be thought as DEAD in add_disk(), can you test it?
diff --git a/block/elevator.c b/block/elevator.c
index 4122026b11f1..efa6ff941a25 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -600,12 +600,14 @@ void elevator_init_mq(struct request_queue *q)
* requests, then no need to quiesce queue which may add long boot
* latency, especially when lots of disks are involved.
*/
- blk_mq_freeze_queue(q);
+ if (__blk_freeze_queue_start(q))
+ blk_freeze_acquire_lock(q, true, false);
blk_mq_cancel_work_sync(q);
err = blk_mq_init_sched(q, e);
- blk_mq_unfreeze_queue(q);
+ if (__blk_mq_unfreeze_queue(q, false))
+ blk_unfreeze_release_lock(q, true, false);
if (err) {
pr_warn("\"%s\" elevator initialization failed, "
...
> 2 locks held by find/1284:
> #0: c3df1e88 (&f->f_pos_lock){+.+.}-{3:3}, at: fdget_pos+0x88/0xd0
> #1: c203a0c8 (&sb->s_type->i_mutex_key#2){++++}-{3:3}, at:
> iterate_dir+0x30/0x140
>
> stack backtrace:
> CPU: 1 UID: 0 PID: 1284 Comm: find Not tainted
> 6.12.0-rc4-00037-gf1be1788a32e #9290
> Hardware name: Samsung Exynos (Flattened Device Tree)
> Call trace:
> unwind_backtrace from show_stack+0x10/0x14
> show_stack from dump_stack_lvl+0x68/0x88
> dump_stack_lvl from print_circular_bug+0x31c/0x394
> print_circular_bug from check_noncircular+0x16c/0x184
> check_noncircular from __lock_acquire+0x158c/0x2970
> __lock_acquire from lock_acquire+0x130/0x384
> lock_acquire from __might_fault+0x50/0x70
> __might_fault from filldir64+0x94/0x28c
> filldir64 from dcache_readdir+0x174/0x260
> dcache_readdir from iterate_dir+0x64/0x140
> iterate_dir from sys_getdents64+0x60/0x130
> sys_getdents64 from ret_fast_syscall+0x0/0x1c
> Exception stack(0xf22b5fa8 to 0xf22b5ff0)
> 5fa0: 004b4fa0 004b4f80 00000004 004b4fa0 00008000
> 00000000
> 5fc0: 004b4fa0 004b4f80 00000001 000000d9 00000000 004b4af0 00000000
> 000010ea
> 5fe0: 004b1eb4 bea05af0 b6da4b08 b6da4a28
>
> --->8---
>
>
> 2. On QEMU's ARM64 virt machine, observed during system suspend/resume
> cycle:
>
> # time rtcwake -s10 -mmem
> rtcwake: wakeup from "mem" using /dev/rtc0 at Tue Oct 29 11:54:30 2024
> PM: suspend entry (s2idle)
> Filesystems sync: 0.004 seconds
> Freezing user space processes
> Freezing user space processes completed (elapsed 0.007 seconds)
> OOM killer disabled.
> Freezing remaining freezable tasks
> Freezing remaining freezable tasks completed (elapsed 0.004 seconds)
>
> ======================================================
> WARNING: possible circular locking dependency detected
> 6.12.0-rc4+ #9291 Not tainted
> ------------------------------------------------------
> rtcwake/1299 is trying to acquire lock:
> ffff80008358a7f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x1c/0x28
>
> but task is already holding lock:
> ffff000006136d68 (&q->q_usage_counter(io)#5){++++}-{0:0}, at:
> virtblk_freeze+0x24/0x60
>
> which lock already depends on the new lock.
>
>
> the existing dependency chain (in reverse order) is:
This one looks a real thing, at least the added lockdep code works as
expected, also the blk_mq_freeze_queue() use in virtio-blk's ->suspend()
is questionable. I will take a further look.
Thanks,
Ming
Powered by blists - more mailing lists