| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241029130137.31284-3-cedricjustine.encarnacion@analog.com>
Date: Tue, 29 Oct 2024 21:01:37 +0800
From: Cedric Encarnacion <cedricjustine.encarnacion@...log.com>
To: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-i2c@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-hwmon@...r.kernel.org>
CC: Guenter Roeck <linux@...ck-us.net>, Jean Delvare <jdelvare@...e.com>,
Jonathan Corbet <corbet@....net>,
Delphine CC Chiu
<Delphine_CC_Chiu@...ynn.com>,
Rob Herring <robh@...nel.org>,
"Krzysztof
Kozlowski" <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Peter
Yin <peteryin.openbmc@...il.com>,
Noah Wang <noahwang.wang@...look.com>, "Marek Vasut" <marex@...x.de>,
Lukas Wunner <lukas@...ner.de>,
Cedric
Encarnacion <cedricjustine.encarnacion@...log.com>
Subject: [PATCH 2/2] hwmon: pmbus: add driver for ltp8800-1a, ltp8800-4a, and ltp8800-2
LTP8800-1A 54V, 150A DC/DC µModule Regulator with PMBus Interface
LTP8800-4A 54V, 200A DC/DC µModule Regulator with PMBus Interface
LTP8800-2 54V, 135A DC/DC μModule Regulator with PMBus Interface
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@...log.com>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/ltp8800.rst | 103 ++++++++++++++++++++++++++++++++
MAINTAINERS | 2 +
drivers/hwmon/pmbus/Kconfig | 18 ++++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/ltp8800.c | 74 +++++++++++++++++++++++
6 files changed, 199 insertions(+)
create mode 100644 Documentation/hwmon/ltp8800.rst
create mode 100644 drivers/hwmon/pmbus/ltp8800.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 4d15664bc41e..d51960f58e43 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -136,6 +136,7 @@ Hardware Monitoring Kernel Drivers
ltc4261
ltc4282
ltc4286
+ ltp8800
max127
max15301
max16064
diff --git a/Documentation/hwmon/ltp8800.rst b/Documentation/hwmon/ltp8800.rst
new file mode 100644
index 000000000000..dea73f60c3d7
--- /dev/null
+++ b/Documentation/hwmon/ltp8800.rst
@@ -0,0 +1,103 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver ltp8800
+=====================
+
+Supported chips:
+
+ * Analog Devices LTP8800-1A
+
+ Prefix: 'ltp8800-1a'
+
+ Addresses scanned: I2C 0x40 - 0x4F
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltp8800-1a.pdf
+
+ * Analog Devices LTP8800-4A
+
+ Prefix: 'ltp8800-4a'
+
+ Addresses scanned: I2C 0x40 - 0x4F
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltp8800-4a.pdf
+
+ * Analog Devices LTP8800-2
+
+ Prefix: 'ltp8800-2'
+
+ Addresses scanned: I2C 0x40 - 0x4F
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltp8800-2.pdf
+
+Authors:
+ - Cedric Encarnacion <cedricjustine.encarnacion@...log.com>
+
+
+Description
+-----------
+
+The LTP8800 is a family of step-down μModule regulators that provides
+microprocessor core voltage from 54V power distribution architecture. LTP8800
+features telemetry monitoring of input/output voltage, input current, output
+power, and temperature over PMBus.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus.rst for details.
+
+Sysfs Attributes
+----------------
+
+======================= ===========================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_crit Critical maximum current
+curr1_crit_alarm Current critical high alarm
+
+curr2_label "iout1"
+curr2_input Measured output current
+curr2_lcrit Critical minimum current
+curr2_crit Critical maximum current
+curr2_max Maximum output current
+curr2_alarm Current alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_lcrit Critical minimum input voltage
+in1_lcrit_alarm Input voltage critical low alarm
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+
+in2_label "vout1"
+in2_input Measured output voltage
+in2_lcrit Critical minimum output voltage
+in2_lcrit_alarm Output voltage critical low alarm
+in2_crit Critical maximum output voltage
+in2_crit_alarm Output voltage critical high alarm
+in2_max Maximum output voltage
+in2_max_alarm Output voltage high alarm
+in2_min Minimum output voltage
+in2_min_alarm Output voltage low alarm
+
+power1_label "pout1"
+power1_input Measured output power
+power1_crit Critical maximum output power
+
+temp1_input Measured temperature
+temp1_lcrit Critical low temperature
+temp1_lcrit_alarm Chip temperature critical low alarm
+temp1_crit Critical high temperature
+temp1_crit_alarm Chip temperature critical high alarm
+======================= ===========================
diff --git a/MAINTAINERS b/MAINTAINERS
index a6abf7243b94..5e7df53eb4a0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13559,6 +13559,8 @@ LTP8800 HARDWARE MONITOR DRIVER
M: Cedric Encarnacion <cedricjustine.encarnacion@...log.com>
L: linux-hwmon@...r.kernel.org
S: Supported
+F: Documentation/hwmon/ltp8800.rst
+F: drivers/hwmon/pmbus/ltp8800.c
LYNX 28G SERDES PHY DRIVER
M: Ioana Ciornei <ioana.ciornei@....com>
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a4f02cad92fd..33e6da249ac8 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -247,6 +247,24 @@ config SENSORS_LTC4286
If you say yes here you get hardware monitoring support for Analog
Devices LTC4286.
+config SENSORS_LTP8800
+ tristate "Analog Devices LTP8800 and compatibles"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices LTP8800-1A, LTP8800-4A, and LTP8800-2.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltp8800.
+
+config SENSORS_LTP8800_REGULATOR
+ bool "Regulator support for LTP8800 and compatibles"
+ depends on SENSORS_LTP8800 && REGULATOR
+ help
+ If you say yes here you get regulator support for Analog Devices
+ LTP8800-1A, LTP8800-4A, and LTP8800-2. LTP8800 is a family of DC/DC
+ µModule regulators that can provide microprocessor power from 54V
+ power distribution architecture.
+
config SENSORS_MAX15301
tristate "Maxim MAX15301"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index d00bcc758b97..aa5bbdb4a806 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_SENSORS_LT7182S) += lt7182s.o
obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o
obj-$(CONFIG_SENSORS_LTC4286) += ltc4286.o
+obj-$(CONFIG_SENSORS_LTP8800) += ltp8800.o
obj-$(CONFIG_SENSORS_MAX15301) += max15301.o
obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
obj-$(CONFIG_SENSORS_MAX16601) += max16601.o
diff --git a/drivers/hwmon/pmbus/ltp8800.c b/drivers/hwmon/pmbus/ltp8800.c
new file mode 100644
index 000000000000..a377f2e2b001
--- /dev/null
+++ b/drivers/hwmon/pmbus/ltp8800.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardware monitoring driver for Analog Devices LTP8800
+ *
+ * Copyright (C) 2024 Analog Devices, Inc.
+ */
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include "pmbus.h"
+
+static const struct regulator_desc ltp8800_reg_desc[] = {
+ PMBUS_REGULATOR("vout", 0),
+};
+
+static struct pmbus_driver_info ltp8800_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT,
+};
+
+static int ltp8800_probe(struct i2c_client *client)
+{
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ if (IS_ENABLED(CONFIG_SENSORS_LTP8800_REGULATOR)) {
+ ltp8800_info.num_regulators = 1;
+ ltp8800_info.reg_desc = ltp8800_reg_desc;
+ }
+
+ return pmbus_do_probe(client, <p8800_info);
+}
+
+static const struct i2c_device_id ltp8800_id[] = {
+ {"ltp8800-1a", 0},
+ {"ltp8800-2", 0},
+ {"ltp8800-4a", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ltp8800_id);
+
+static const struct of_device_id ltp8800_of_match[] = {
+ { .compatible = "adi,ltp8800-1a"},
+ { .compatible = "adi,ltp8800-2"},
+ { .compatible = "adi,ltp8800-4a"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, ltp8800_of_match);
+
+static struct i2c_driver ltp8800_driver = {
+ .driver = {
+ .name = "ltp8800",
+ .of_match_table = ltp8800_of_match,
+ },
+ .probe = ltp8800_probe,
+ .id_table = ltp8800_id,
+};
+module_i2c_driver(ltp8800_driver);
+
+MODULE_AUTHOR("Cedric Encarnacion <cedricjustine.encarnacion@...log.com>");
+MODULE_DESCRIPTION("Analog Devices LTP8800 HWMON PMBus Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--
2.39.2
Powered by blists - more mailing lists