[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGsJ_4xyEg-hsAcDMM11f3K=FS28-Xp7sy4uo0fzCS5xR2EArg@mail.gmail.com>
Date: Thu, 31 Oct 2024 09:48:13 +1300
From: Barry Song <21cnbao@...il.com>
To: Usama Arif <usamaarif642@...il.com>
Cc: akpm@...ux-foundation.org, linux-mm@...ck.org,
linux-kernel@...r.kernel.org, Barry Song <v-songbaohua@...o.com>,
Kanchana P Sridhar <kanchana.p.sridhar@...el.com>, David Hildenbrand <david@...hat.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>, Chris Li <chrisl@...nel.org>,
Yosry Ahmed <yosryahmed@...gle.com>, "Huang, Ying" <ying.huang@...el.com>,
Kairui Song <kasong@...cent.com>, Ryan Roberts <ryan.roberts@....com>,
Johannes Weiner <hannes@...xchg.org>, Michal Hocko <mhocko@...nel.org>,
Roman Gushchin <roman.gushchin@...ux.dev>, Shakeel Butt <shakeel.butt@...ux.dev>,
Muchun Song <muchun.song@...ux.dev>
Subject: Re: [PATCH RFC] mm: mitigate large folios usage and swap thrashing
for nearly full memcg
On Thu, Oct 31, 2024 at 9:41 AM Usama Arif <usamaarif642@...il.com> wrote:
>
>
>
> On 30/10/2024 20:27, Barry Song wrote:
> > On Thu, Oct 31, 2024 at 3:51 AM Usama Arif <usamaarif642@...il.com> wrote:
> >>
> >>
> >>
> >> On 28/10/2024 22:03, Barry Song wrote:
> >>> On Mon, Oct 28, 2024 at 8:07 PM Usama Arif <usamaarif642@...il.com> wrote:
> >>>>
> >>>>
> >>>>
> >>>> On 27/10/2024 01:14, Barry Song wrote:
> >>>>> From: Barry Song <v-songbaohua@...o.com>
> >>>>>
> >>>>> In a memcg where mTHP is always utilized, even at full capacity, it
> >>>>> might not be the best option. Consider a system that uses only small
> >>>>> folios: after each reclamation, a process has at least SWAP_CLUSTER_MAX
> >>>>> of buffer space before it can initiate the next reclamation. However,
> >>>>> large folios can quickly fill this space, rapidly bringing the memcg
> >>>>> back to full capacity, even though some portions of the large folios
> >>>>> may not be immediately needed and used by the process.
> >>>>>
> >>>>> Usama and Kanchana identified a regression when building the kernel in
> >>>>> a memcg with memory.max set to a small value while enabling large
> >>>>> folio swap-in support on zswap[1].
> >>>>>
> >>>>> The issue arises from an edge case where the memory cgroup remains
> >>>>> nearly full most of the time. Consequently, bringing in mTHP can
> >>>>> quickly cause a memcg overflow, triggering a swap-out. The subsequent
> >>>>> swap-in then recreates the overflow, resulting in a repetitive cycle.
> >>>>>
> >>>>> We need a mechanism to stop the cup from overflowing continuously.
> >>>>> One potential solution is to slow the filling process when we identify
> >>>>> that the cup is nearly full.
> >>>>>
> >>>>> Usama reported an improvement when we mitigate mTHP swap-in as the
> >>>>> memcg approaches full capacity[2]:
> >>>>>
> >>>>> int mem_cgroup_swapin_charge_folio(...)
> >>>>> {
> >>>>> ...
> >>>>> if (folio_test_large(folio) &&
> >>>>> mem_cgroup_margin(memcg) < max(MEMCG_CHARGE_BATCH, folio_nr_pages(folio)))
> >>>>> ret = -ENOMEM;
> >>>>> else
> >>>>> ret = charge_memcg(folio, memcg, gfp);
> >>>>> ...
> >>>>> }
> >>>>>
> >>>>> AMD 16K+32K THP=always
> >>>>> metric mm-unstable mm-unstable + large folio zswapin series mm-unstable + large folio zswapin + no swap thrashing fix
> >>>>> real 1m23.038s 1m23.050s 1m22.704s
> >>>>> user 53m57.210s 53m53.437s 53m52.577s
> >>>>> sys 7m24.592s 7m48.843s 7m22.519s
> >>>>> zswpin 612070 999244 815934
> >>>>> zswpout 2226403 2347979 2054980
> >>>>> pgfault 20667366 20481728 20478690
> >>>>> pgmajfault 385887 269117 309702
> >>>>>
> >>>>> AMD 16K+32K+64K THP=always
> >>>>> metric mm-unstable mm-unstable + large folio zswapin series mm-unstable + large folio zswapin + no swap thrashing fix
> >>>>> real 1m22.975s 1m23.266s 1m22.549s
> >>>>> user 53m51.302s 53m51.069s 53m46.471s
> >>>>> sys 7m40.168s 7m57.104s 7m25.012s
> >>>>> zswpin 676492 1258573 1225703
> >>>>> zswpout 2449839 2714767 2899178
> >>>>> pgfault 17540746 17296555 17234663
> >>>>> pgmajfault 429629 307495 287859
> >>>>>
> >>>>> I wonder if we can extend the mitigation to do_anonymous_page() as
> >>>>> well. Without hardware like AMD and ARM with hardware TLB coalescing
> >>>>> or CONT-PTE, I conducted a quick test on my Intel i9 workstation with
> >>>>> 10 cores and 2 threads. I enabled one 12 GiB zRAM while running kernel
> >>>>> builds in a memcg with memory.max set to 1 GiB.
> >>>>>
> >>>>> $ echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled
> >>>>> $ echo always > /sys/kernel/mm/transparent_hugepage/hugepages-32kB/enabled
> >>>>> $ echo always > /sys/kernel/mm/transparent_hugepage/hugepages-16kB/enabled
> >>>>> $ echo never > /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled
> >>>>>
> >>>>> $ time systemd-run --scope -p MemoryMax=1G make ARCH=arm64 \
> >>>>> CROSS_COMPILE=aarch64-linux-gnu- Image -10 1>/dev/null 2>/dev/null
> >>>>>
> >>>>> disable-mTHP-swapin mm-unstable with-this-patch
> >>>>> Real: 6m54.595s 7m4.832s 6m45.811s
> >>>>> User: 66m42.795s 66m59.984s 67m21.150s
> >>>>> Sys: 12m7.092s 15m18.153s 12m52.644s
> >>>>> pswpin: 4262327 11723248 5918690
> >>>>> pswpout: 14883774 19574347 14026942
> >>>>> 64k-swpout: 624447 889384 480039
> >>>>> 32k-swpout: 115473 242288 73874
> >>>>> 16k-swpout: 158203 294672 109142
> >>>>> 64k-swpin: 0 495869 159061
> >>>>> 32k-swpin: 0 219977 56158
> >>>>> 16k-swpin: 0 223501 81445
> >>>>>
> >>>>
> >>>
> >>> Hi Usama,
> >>>
> >>>> hmm, both the user and sys time are worse with the patch compared to
> >>>> disable-mTHP-swapin. I wonder if the real time is an anomaly and if you
> >>>> repeat the experiment the real time might be worse as well?
> >>>
> >>> Well, I've improved my script to include a loop:
> >>>
> >>> echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled
> >>> echo always > /sys/kernel/mm/transparent_hugepage/hugepages-32kB/enabled
> >>> echo always > /sys/kernel/mm/transparent_hugepage/hugepages-16kB/enabled
> >>> echo never > /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled
> >>>
> >>> for ((i=1; i<=100; i++))
> >>> do
> >>> echo "Executing round $i"
> >>> make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean 1>/dev/null 2>/dev/null
> >>> echo 3 > /proc/sys/vm/drop_caches
> >>> time systemd-run --scope -p MemoryMax=1G make ARCH=arm64 \
> >>> CROSS_COMPILE=aarch64-linux-gnu- vmlinux -j15 1>/dev/null 2>/dev/null
> >>> cat /proc/vmstat | grep pswp
> >>> echo -n 64k-swpout: ; cat
> >>> /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout
> >>> echo -n 32k-swpout: ; cat
> >>> /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout
> >>> echo -n 16k-swpout: ; cat
> >>> /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout
> >>> echo -n 64k-swpin: ; cat
> >>> /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpin
> >>> echo -n 32k-swpin: ; cat
> >>> /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpin
> >>> echo -n 16k-swpin: ; cat
> >>> /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpin
> >>> done
> >>>
> >>> I've noticed that the user/sys/real time on my i9 machine fluctuates
> >>> constantly, could be things
> >>> like:
> >>> real 6m52.087s
> >>> user 67m12.463s
> >>> sys 13m8.281s
> >>> ...
> >>>
> >>> real 7m42.937s
> >>> user 66m55.250s
> >>> sys 12m56.330s
> >>> ...
> >>>
> >>> real 6m49.374s
> >>> user 66m37.040s
> >>> sys 12m44.542s
> >>> ...
> >>>
> >>> real 6m54.205s
> >>> user 65m49.732s
> >>> sys 11m33.078s
> >>> ...
> >>>
> >>> likely due to unstable temperatures and I/O latency. As a result, my
> >>> data doesn’t seem
> >>> reference-worthy.
> >>>
> >>
> >> So I had suggested retrying the experiment to see how reproducible it is,
> >> but had not done that myself!
> >> Thanks for sharing this. I tried many times on the AMD server and I see
> >> varying numbers as well.
> >>
> >> AMD 16K THP always, cgroup = 4G, large folio zswapin patches
> >> real 1m28.351s
> >> user 54m14.476s
> >> sys 8m46.596s
> >> zswpin 811693
> >> zswpout 2137310
> >> pgfault 27344671
> >> pgmajfault 290510
> >> ..
> >> real 1m24.557s
> >> user 53m56.815s
> >> sys 8m10.200s
> >> zswpin 571532
> >> zswpout 1645063
> >> pgfault 26989075
> >> pgmajfault 205177
> >> ..
> >> real 1m26.083s
> >> user 54m5.303s
> >> sys 9m55.247s
> >> zswpin 1176292
> >> zswpout 2910825
> >> pgfault 27286835
> >> pgmajfault 419746
> >>
> >>
> >> The sys time can especially vary by large numbers. I think you see the same.
> >>
> >>
> >>> As a phone engineer, we never use phones to run kernel builds. I'm also
> >>> quite certain that phones won't provide stable and reliable data for this
> >>> type of workload. Without access to a Linux server to conduct the test,
> >>> I really need your help.
> >>>
> >>> I used to work on optimizing the ARM server scheduler and memory
> >>> management, and I really miss that machine I had until three years ago :-)
> >>>
> >>>>
> >>>>> I need Usama's assistance to identify a suitable patch, as I lack
> >>>>> access to hardware such as AMD machines and ARM servers with TLB
> >>>>> optimization.
> >>>>>
> >>>>> [1] https://lore.kernel.org/all/b1c17b5e-acd9-4bef-820e-699768f1426d@gmail.com/
> >>>>> [2] https://lore.kernel.org/all/7a14c332-3001-4b9a-ada3-f4d6799be555@gmail.com/
> >>>>>
> >>>>> Cc: Kanchana P Sridhar <kanchana.p.sridhar@...el.com>
> >>>>> Cc: Usama Arif <usamaarif642@...il.com>
> >>>>> Cc: David Hildenbrand <david@...hat.com>
> >>>>> Cc: Baolin Wang <baolin.wang@...ux.alibaba.com>
> >>>>> Cc: Chris Li <chrisl@...nel.org>
> >>>>> Cc: Yosry Ahmed <yosryahmed@...gle.com>
> >>>>> Cc: "Huang, Ying" <ying.huang@...el.com>
> >>>>> Cc: Kairui Song <kasong@...cent.com>
> >>>>> Cc: Ryan Roberts <ryan.roberts@....com>
> >>>>> Cc: Johannes Weiner <hannes@...xchg.org>
> >>>>> Cc: Michal Hocko <mhocko@...nel.org>
> >>>>> Cc: Roman Gushchin <roman.gushchin@...ux.dev>
> >>>>> Cc: Shakeel Butt <shakeel.butt@...ux.dev>
> >>>>> Cc: Muchun Song <muchun.song@...ux.dev>
> >>>>> Signed-off-by: Barry Song <v-songbaohua@...o.com>
> >>>>> ---
> >>>>> include/linux/memcontrol.h | 9 ++++++++
> >>>>> mm/memcontrol.c | 45 ++++++++++++++++++++++++++++++++++++++
> >>>>> mm/memory.c | 17 ++++++++++++++
> >>>>> 3 files changed, 71 insertions(+)
> >>>>>
> >>>>> diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
> >>>>> index 524006313b0d..8bcc8f4af39f 100644
> >>>>> --- a/include/linux/memcontrol.h
> >>>>> +++ b/include/linux/memcontrol.h
> >>>>> @@ -697,6 +697,9 @@ static inline int mem_cgroup_charge(struct folio *folio, struct mm_struct *mm,
> >>>>> int mem_cgroup_hugetlb_try_charge(struct mem_cgroup *memcg, gfp_t gfp,
> >>>>> long nr_pages);
> >>>>>
> >>>>> +int mem_cgroup_precharge_large_folio(struct mm_struct *mm,
> >>>>> + swp_entry_t *entry);
> >>>>> +
> >>>>> int mem_cgroup_swapin_charge_folio(struct folio *folio, struct mm_struct *mm,
> >>>>> gfp_t gfp, swp_entry_t entry);
> >>>>>
> >>>>> @@ -1201,6 +1204,12 @@ static inline int mem_cgroup_hugetlb_try_charge(struct mem_cgroup *memcg,
> >>>>> return 0;
> >>>>> }
> >>>>>
> >>>>> +static inline int mem_cgroup_precharge_large_folio(struct mm_struct *mm,
> >>>>> + swp_entry_t *entry)
> >>>>> +{
> >>>>> + return 0;
> >>>>> +}
> >>>>> +
> >>>>> static inline int mem_cgroup_swapin_charge_folio(struct folio *folio,
> >>>>> struct mm_struct *mm, gfp_t gfp, swp_entry_t entry)
> >>>>> {
> >>>>> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> >>>>> index 17af08367c68..f3d92b93ea6d 100644
> >>>>> --- a/mm/memcontrol.c
> >>>>> +++ b/mm/memcontrol.c
> >>>>> @@ -4530,6 +4530,51 @@ int mem_cgroup_hugetlb_try_charge(struct mem_cgroup *memcg, gfp_t gfp,
> >>>>> return 0;
> >>>>> }
> >>>>>
> >>>>> +static inline bool mem_cgroup_has_margin(struct mem_cgroup *memcg)
> >>>>> +{
> >>>>> + for (; !mem_cgroup_is_root(memcg); memcg = parent_mem_cgroup(memcg)) {
> >>>>> + if (mem_cgroup_margin(memcg) < HPAGE_PMD_NR)
> >>>>
> >>>> There might be 3 issues with the approach:
> >>>>
> >>>> Its a very big margin, lets say you have ARM64_64K_PAGES, and you have
> >>>> 256K THP set to always. As HPAGE_PMD is 512M for 64K page, you are
> >>>> basically saying you need 512M free memory to swapin just 256K?
> >>>
> >>> Right, sorry for the noisy code. I was just thinking about 4KB pages
> >>> and wondering
> >>> if we could simplify the code.
> >>>
> >>>>
> >>>> Its an uneven margin for different folio sizes.
> >>>> For 16K folio swapin, you are checking if there is margin for 128 folios,
> >>>> but for 1M folio swapin, you are checking there is margin for just 2 folios.
> >>>>
> >>>> Maybe it might be better to make this dependent on some factor of folio_nr_pages?
> >>>
> >>> Agreed. This is similar to what we discussed regarding your zswap mTHP
> >>> swap-in series:
> >>>
> >>> int mem_cgroup_swapin_charge_folio(...)
> >>> {
> >>> ...
> >>> if (folio_test_large(folio) &&
> >>> mem_cgroup_margin(memcg) < max(MEMCG_CHARGE_BATCH,
> >>> folio_nr_pages(folio)))
> >>> ret = -ENOMEM;
> >>> else
> >>> ret = charge_memcg(folio, memcg, gfp);
> >>> ...
> >>> }
> >>>
> >>> As someone focused on phones, my challenge is the absence of stable platforms to
> >>> benchmark this type of workload. If possible, Usama, I would greatly
> >>> appreciate it if
> >>> you could take the lead on the patch.
> >>>
> >>>>
> >>>> As Johannes pointed out, the charging code already does the margin check.
> >>>> So for 4K, the check just checks if there is 4K available, but for 16K it checks
> >>>> if a lot more than 16K is available. Maybe there should be a similar policy for
> >>>> all? I guess this is similar to my 2nd point, but just considers 4K folios as
> >>>> well.
> >>>
> >>> I don't think the charging code performs a margin check. It simply
> >>> tries to charge
> >>> the specified nr_pages (whether 1 or more). If nr_pages are available,
> >>> the charge
> >>> proceeds; otherwise, if GFP allows blocking, it triggers memory reclamation to
> >>> reclaim max(SWAP_CLUSTER_MAX, nr_pages) base pages.
> >>>
> >>
> >> So if you have defrag not set to always, it will not trigger reclamation.
> >> I think that is a bigger usecase, i.e. defrag=madvise,defer,etc is probably
> >> used much more then always.
> >>
> >> In the current code in that case try_charge_memcg will return -ENOMEM all
> >> the way to mem_cgroup_swapin_charge_folio and alloc_swap_folio will then
> >> try the next order. So eventhough it might not be calling the mem_cgroup_margin
> >> function, it is kind of is doing the same?
> >>
> >>> If, after reclamation, we have exactly SWAP_CLUSTER_MAX pages available, a
> >>> large folio with nr_pages == SWAP_CLUSTER_MAX will successfully charge,
> >>> immediately filling the memcg.
> >>>
> >>> Shortly after, smaller folios—typically with blockable GFP—will quickly trigger
> >>> additional reclamation. While nr_pages - 1 subpages of the large folio may not
> >>> be immediately needed, they still occupy enough space to fill the memcg to
> >>> capacity.
> >>>
> >>> My second point about the mitigation is as follows: For a system (or
> >>> memcg) under severe memory pressure, especially one without hardware TLB
> >>> optimization, is enabling mTHP always the right choice? Since mTHP operates at
> >>> a larger granularity, some internal fragmentation is unavoidable, regardless
> >>> of optimization. Could the mitigation code help in automatically tuning
> >>> this fragmentation?
> >>>
> >>
> >> I agree with the point that enabling mTHP always is not the right thing to do
> >> on all platforms. I also think it might be the case that enabling mTHP
> >> might be a good thing for some workloads, but enabling mTHP swapin along with
> >> it might not.
> >>
> >> As you said when you have apps switching between foreground and background
> >> in android, it probably makes sense to have large folio swapping, as you
> >> want to bringin all the pages from background app as quickly as possible.
> >> And also all the TLB optimizations and smaller lru overhead you get after
> >> you have brought in all the pages.
> >> Linux kernel build test doesnt really get to benefit from the TLB optimization
> >> and smaller lru overhead, as probably the pages are very short lived. So I
> >> think it doesnt show the benefit of large folio swapin properly and
> >> large folio swapin should probably be disabled for this kind of workload,
> >> eventhough mTHP should be enabled.
> >
> > I'm not entirely sure if this applies to platforms without TLB
> > optimization, especially
> > in the absence of swap. In a memory-limited cgroup without swap, would
> > mTHP still
> > cause significant thrashing of file-backed folios? When a large swap
> > file is present,
> > the inability to swap in mTHP seems to act as a workaround for fragmentation,
> > allowing fragmented pages of the original mTHP from do_anonymous_page() to
> > remain in swap.
> >
> >>
> >> I am not sure that the approach we are trying in this patch is the right way:
> >> - This patch makes it a memcg issue, but you could have memcg disabled and
> >> then the mitigation being tried here wont apply.
> >> - Instead of this being a large folio swapin issue, is it more of a readahead
> >> issue? If we zswap (without the large folio swapin series) and change the window
> >> to 1 in swap_vma_readahead, we might see an improvement in linux kernel build time
> >> when cgroup memory is limited as readahead would probably cause swap thrashing as
> >> well.
> >> - Instead of looking at cgroup margin, maybe we should try and look at
> >> the rate of change of workingset_restore_anon? This might be a lot more complicated
> >> to do, but probably is the right metric to determine swap thrashing. It also means
> >> that this could be used in both the synchronous swapcache skipping path and
> >> swapin_readahead path.
> >> (Thanks Johannes for suggesting this)
> >>
> >> With the large folio swapin, I do see the large improvement when considering only
> >> swapin performance and latency in the same way as you saw in zram.
> >> Maybe the right short term approach is to have
> >> /sys/kernel/mm/transparent_hugepage/swapin
> >> and have that disabled by default to avoid regression.
> >
> > A crucial component is still missing—managing the compression and decompression
> > of multiple pages as a larger block. This could significantly reduce
> > system time and
> > potentially resolve the kernel build issue within a small memory
> > cgroup, even with
> > swap thrashing.
> >
> > I’ll send an update ASAP so you can rebase for zswap.
>
> Did you mean https://lore.kernel.org/all/20241021232852.4061-1-21cnbao@gmail.com/?
> Thats wont benefit zswap, right?
That's right. I assume we can also make it work with zswap?
> I actually had a few questions about it. Mainly that the benefit comes if the
> pagefault happens on page 0 of the large folio. But if the page fault happens
> on any other page, lets say page 1 of a 64K folio. then it will decompress the
> entire 64K chunk and just copy page 1? (memcpy in zram_bvec_read_multi_pages_partial).
> Could that cause a regression as you have to decompress a large chunk for just
> getting 1 4K page?
> If we assume uniform distribution of page faults, maybe it could make things worse?
>
> I probably should ask all of this in that thread.
With mTHP swap-in, a page fault on any page behaves the same as a fault on
page 0. Without mTHP swap-in, there’s also no difference between
faults on page 0
and other pages.
A fault on any page means that the entire block is decompressed. The
only difference
is that we don’t partially copy one page when mTHP swap-in is present.
>
> >
> >> If the workload owner sees a benefit, they can enable it.
> >> I can add this when sending the next version of large folio zswapin if that makes
> >> sense?
> >> Longer term I can try and have a look at if we can do something with
> >> workingset_restore_anon to improve things.
> >>
> >> Thanks,
> >> Usama
Thanks
Barry
Powered by blists - more mailing lists