[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d6bf5b0d-7036-4636-a15e-41db6f665323@gmail.com>
Date: Wed, 30 Oct 2024 09:46:35 +0800
From: Ming-Jen Chen <mjchen0829@...il.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-input@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
mjchen@...oton.com, peng.fan@....com, sudeep.holla@....com, arnd@...db.de,
conor+dt@...nel.org, krzk+dt@...nel.org, robh@...nel.org,
dmitry.torokhov@...il.com
Subject: Re: [PATCH 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
On 2024/10/29 下午 09:19, Krzysztof Kozlowski wrote:
> On 29/10/2024 03:00, Ming-Jen Chen wrote:
>>>>>>>> +
>>>>>>>> + per-scale:
>>>>>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>>>>>> + description: Row Scan Cycle Pre-scale Value (1 to 256).
>>>>>>> Missing constraints
>>>>>>>
>>>>>>>> +
>>>>>>>> + per-scalediv:
>>>>>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>>>>>> + description: Per-scale divider (1 to 256).
>>>>>>> Missing constraints
>>>>>>>
>>>>>>> Both properties are unexpected... aren't you duplicating existing
>>>>>>> properties?
>>>>>> pre-scale:
>>>>>> This value configures the IC register for the row scan cycle
>>>>>> pre-scaling, with valid values ranging from 1 to 256
>>>>>> per-scalediv:(I will change pre-scalediv to pre-scale-div)
>>>>> Please look for matching existing properties first.
>>>> I will change it to the following content:
>>>>
>>>> nuvoton,scan-time:
>>> Why? What about my request?
>> I utilized|grep| to search for relevant properties in the|input/| folder using keywords such as|scan|,|time|,|period|,|freq|, and|interval|.
>> While I found some similar properties, I did not locate any that completely meet my requirements.
>>
>> For example, I found|"scanning_period"|, which is described as "Time between scans. Each step is 1024 us. Valid 1-256."
>> I would like to confirm if you are suggesting that I use|scanning_period| and explain my specific use case in the description,
>> for example:
> Description of these properties did not tell me much about their purpose
> and underlying hardware, so I don't know which fits here. It looks like
> you want to configure clock... but then wording confuses me -
> "per-scale". What is "per"? Isn't it usually "pre"?
>
> So in general I don't know what to recommend you because your patch is
> really unclear.
>
> Please also wrap emails according to mailing lists standards. And use
> proper line separation of sentences. It's really hard to understand your
> email.
I apologize for any confusion caused by my previous responses regarding
this issue.
It seems that our discussion has reached a bit of a bottleneck.
I have a suggestion that I hope you might agree with: I would like to
upload version 2 of the code.
In this version, I will rewrite the properties, although it may not
resolve their underlying issues.
I will also continue to keep our current discussion ongoing in version 2.
Thank you for your understanding, and I look forward to your thoughts on
this approach
>
>> nuvoton,scanning-period:
>> type: uint32
>> description: | Set the scan time for each key, specified in terms of keypad IP clock
>> cycles. The valid range is from 1 to 256. minimum: 1
>> maximum: 256 Could you please confirm if this approach aligns with your suggestion,
>> or if you have any other recommended existing properties?
> Why this would be board dependent?
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists