| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZyUZzGqYIabgCFZ/@lizhi-Precision-Tower-5810>
Date: Fri, 1 Nov 2024 14:11:24 -0400
From: Frank Li <Frank.li@....com>
To: Andrei Stefanescu <andrei.stefanescu@....nxp.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Chester Lin <chester62515@...il.com>,
Matthias Brugger <mbrugger@...e.com>,
Ghennadi Procopciuc <Ghennadi.Procopciuc@....com>,
Larisa Grigore <larisa.grigore@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>, Lee Jones <lee@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Dong Aisheng <aisheng.dong@....com>, Jacky Bai <ping.bai@....com>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
NXP S32 Linux Team <s32@....com>,
Christophe Lizzi <clizzi@...hat.com>,
Alberto Ruiz <aruizrui@...hat.com>,
Enric Balletbo <eballetb@...hat.com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
imx@...ts.linux.dev
Subject: Re: [PATCH v5 1/7] dt-bindings: mfd: add support for the NXP SIUL2
module
On Fri, Nov 01, 2024 at 10:06:07AM +0200, Andrei Stefanescu wrote:
> Add the dt-bindings for the NXP SIUL2 module which is a multi
> function device. It can export information about the SoC, configure
> the pinmux&pinconf for pins and it is also a GPIO controller with
> interrupt capability.
>
> Signed-off-by: Andrei Stefanescu <andrei.stefanescu@....nxp.com>
> ---
> .../devicetree/bindings/mfd/nxp,siul2.yaml | 191 ++++++++++++++++++
> 1 file changed, 191 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/nxp,siul2.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/nxp,siul2.yaml b/Documentation/devicetree/bindings/mfd/nxp,siul2.yaml
> new file mode 100644
> index 000000000000..141ec1219821
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/nxp,siul2.yaml
> @@ -0,0 +1,191 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2024 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/nxp,siul2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: System Integration Unit Lite2 (SIUL2)
> +
> +maintainers:
> + - Andrei Stefanescu <andrei.stefanescu@....nxp.com>
> +
> +description: |
> + SIUL2 is a hardware block which implements pinmuxing,
> + pinconf, GPIOs (some with interrupt capability) and
> + registers which contain information about the SoC.
> + There are generally two SIUL2 modules whose functionality
> + is grouped together. For example interrupt configuration
> + registers are part of SIUL2_1 even though interrupts are
> + also available for SIUL2_0 pins.
> +
> + The following register types are exported by SIUL2:
> + - MIDR (MCU ID Register) - information related to the SoC
> + - interrupt configuration registers
> + - MSCR (Multiplexed Signal Configuration Register) - pinmuxing and pinconf
> + - IMCR (Input Multiplexed Signal Configuration Register)- pinmuxing
> + - PGPDO (Parallel GPIO Pad Data Out Register) - GPIO output value
> + - PGPDI (Parallel GPIO Pad Data In Register) - GPIO input value
> +
> + Most registers are 32bit wide with the exception of PGPDO/PGPDI which are
> + 16bit wide.
> +
> +properties:
> + compatible:
> + enum:
> + - nxp,s32g2-siul2
> + - nxp,s32g3-siul2
> +
> + reg:
> + items:
> + - description: SIUL2_0 module memory
> + - description: SIUL2_1 module memory
description have not provide more informaiton.
maxItems: 2 should be enough here.
> +
> + reg-names:
> + items:
> + - const: siul20
> + - const: siul21
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + gpio-ranges:
> + minItems: 2
> + maxItems: 2
> +
> + gpio-reserved-ranges:
> + minItems: 2
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + const: 2
> +
> + nvmem-layout:
> + $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
> + description:
> + This container may reference an NVMEM layout parser.
> +
> +patternProperties:
> + '-hog(-[0-9]+)?$':
> + required:
> + - gpio-hog
> +
> + '-pins$':
> + type: object
> + additionalProperties: false
> +
> + patternProperties:
> + '-grp[0-9]$':
> + type: object
> + allOf:
> + - $ref: /schemas/pinctrl/pinmux-node.yaml#
> + - $ref: /schemas/pinctrl/pincfg-node.yaml#
> + description:
> + Pinctrl node's client devices specify pin muxes using subnodes,
> + which in turn use the standard properties below.
> +
> + properties:
> + bias-disable: true
> + bias-high-impedance: true
> + bias-pull-up: true
> + bias-pull-down: true
> + drive-open-drain: true
> + input-enable: true
> + output-enable: true
suppose needn't such common property, if use
unevaluatedProperties: false
> +
> + pinmux:
> + description: |
needn't "|" here
> + An integer array for representing pinmux configurations of
> + a device. Each integer consists of a PIN_ID and a 4-bit
> + selected signal source(SSS) as IOMUX setting, which is
> + calculated as: pinmux = (PIN_ID << 4 | SSS)
> +
> + slew-rate:
> + description: Supported slew rate based on Fmax values (MHz)
> + enum: [83, 133, 150, 166, 208]
> +
> + additionalProperties: false
It should be unevaluatedProperties: false because there $ref.
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - gpio-controller
> + - "#gpio-cells"
> + - gpio-ranges
> + - gpio-reserved-ranges
> + - interrupts
> + - interrupt-controller
> + - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + siul2: siul2@...9c000 {
needn't label siul2.
> + compatible = "nxp,s32g2-siul2";
> + reg = <0x4009c000 0x179c>,
> + <0x44010000 0x17b0>;
> + reg-names = "siul20", "siul21";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&siul2 0 0 102>, <&siul2 112 112 79>;
> + gpio-reserved-ranges = <102 10>, <123 21>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
> +
> + jtag_pins: jtag-pins {
> + jtag-grp0 {
> + pinmux = <0x0>;
> + input-enable;
> + bias-pull-up;
> + slew-rate = <166>;
> + };
> +
> + jtag-grp1 {
> + pinmux = <0x11>;
> + slew-rate = <166>;
> + };
one example should be enough.
> +
> + jtag-grp2 {
> + pinmux = <0x40>;
> + input-enable;
> + bias-pull-down;
> + slew-rate = <166>;
> + };
> +
> + jtag-grp3 {
> + pinmux = <0x23c0>,
> + <0x23d0>,
> + <0x2320>;
> + };
> +
> + jtag-grp4 {
> + pinmux = <0x51>;
> + input-enable;
> + bias-pull-up;
> + slew-rate = <166>;
> + };
> + };
> +
> + nvmem-layout {
> + compatible = "fixed-layout";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + soc-major@0 {
> + reg = <0 0x4>;
> + };
> + };
> + };
> +...
> --
> 2.45.2
>
Powered by blists - more mailing lists