[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241102-asahi-spi-dt-v1-2-7ac44c0a88f9@jannau.net>
Date: Sat, 02 Nov 2024 12:34:21 +0100
From: Janne Grunau via B4 Relay <devnull+j.jannau.net@...nel.org>
To: Hector Martin <marcan@...can.st>, Sven Peter <sven@...npeter.dev>,
Alyssa Rosenzweig <alyssa@...enzweig.io>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: asahi@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Janne Grunau <j@...nau.net>
Subject: [PATCH 2/5] arm64: dts: apple: t8103: Add spi controller nodes
From: Janne Grunau <j@...nau.net>
Apple silicon devices have one or more SPI devices. Add device tree
nodes for all known controllers. The missing ones could be guessed and
tested with a little effort but since the devices expose no pins and
no new devices are expected there is no point in spending the effort.
SPI is used for spi-nor and input devices like keyboard, trackpad,
touchscreen and fingerprint reader. Only the spi-nor flash has upstream
drivers. Support for it will be added in a following commit.
Signed-off-by: Janne Grunau <j@...nau.net>
---
arch/arm64/boot/dts/apple/t8103.dtsi | 68 ++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 9b0dad6b618444ac6b1c9735c50cccfc3965f947..9b2d32059c3542f12fedd7f4dca309baa66c1bd4 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -326,6 +326,20 @@ clkref: clock-ref {
clock-output-names = "clkref";
};
+ clk_120m: clock-120m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <120000000>;
+ clock-output-names = "clk_120m";
+ };
+
+ clk_200m: clock-200m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "clk_200m";
+ };
+
/*
* This is a fabulated representation of the input clock
* to NCO since we don't know the true clock tree.
@@ -441,6 +455,46 @@ fpwm1: pwm@...044000 {
status = "disabled";
};
+ spi0: spi@...100000 {
+ compatible = "apple,t8103-spi", "apple,spi";
+ reg = <0x2 0x35100000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_200m>;
+ power-domains = <&ps_spi0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@...104000 {
+ compatible = "apple,t8103-spi", "apple,spi";
+ reg = <0x2 0x35104000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 615 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_200m>;
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_spi1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@...10c000 {
+ compatible = "apple,t8103-spi", "apple,spi";
+ reg = <0x2 0x3510c000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 617 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_120m>;
+ pinctrl-0 = <&spi3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_spi3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
serial0: serial@...200000 {
compatible = "apple,s5l-uart";
reg = <0x2 0x35200000 0x0 0x1000>;
@@ -597,6 +651,20 @@ i2c4_pins: i2c4-pins {
<APPLE_PINMUX(134, 1)>;
};
+ spi1_pins: spi1-pins {
+ pinmux = <APPLE_PINMUX(42, 1)>,
+ <APPLE_PINMUX(43, 1)>,
+ <APPLE_PINMUX(44, 1)>,
+ <APPLE_PINMUX(45, 1)>;
+ };
+
+ spi3_pins: spi3-pins {
+ pinmux = <APPLE_PINMUX(46, 1)>,
+ <APPLE_PINMUX(47, 1)>,
+ <APPLE_PINMUX(48, 1)>,
+ <APPLE_PINMUX(49, 1)>;
+ };
+
pcie_pins: pcie-pins {
pinmux = <APPLE_PINMUX(150, 1)>,
<APPLE_PINMUX(151, 1)>,
--
2.47.0
Powered by blists - more mailing lists